Age | Commit message (Collapse) | Author |
|
This change supports using a user supplied TCP MSS for new active TCP
connections. Note, the user supplied MSS must be less than or equal to the
maximum possible MSS for a TCP connection's route. If it is greater than the
maximum possible MSS, the maximum possible MSS will be used as the connection's
MSS instead.
This change does not use this user supplied MSS for connections accepted from
listening sockets - that will come in a later change.
Test: Test that outgoing TCP SYN segments contain a TCP MSS option with the user
supplied MSS if it is not greater than the maximum possible MSS for the route.
PiperOrigin-RevId: 277185125
|
|
This change validates the ICMPv6 checksum field before further processing an
ICMPv6 packet.
Tests: Unittests to make sure that only ICMPv6 packets with a valid checksum
are accepted/processed. Existing tests using checker.ICMPv6 now also check the
ICMPv6 checksum field.
PiperOrigin-RevId: 276779148
|
|
DelayOption is set on all new endpoints in gVisor.
PiperOrigin-RevId: 276746791
|
|
The amss field in the tcpip.tcp.handshake was not used anywhere. Removed it to
not cause confusion with the amss field in the tcpip.tcp.endpoint struct, which
was documented to be used (and is actually being used) for the same purpose.
PiperOrigin-RevId: 276577088
|
|
PiperOrigin-RevId: 276380008
|
|
Right now, we send each tcp packet separately, we call one system
call per-packet. This patch allows to generate multiple tcp packets
and send them by sendmmsg.
The arguable part of this CL is a way how to handle multiple headers.
This CL adds the next field to the Prepandable buffer.
Nginx test results:
Server Software: nginx/1.15.9
Server Hostname: 10.138.0.2
Server Port: 8080
Document Path: /10m.txt
Document Length: 10485760 bytes
w/o gso:
Concurrency Level: 5
Time taken for tests: 5.491 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 18.21 [#/sec] (mean)
Time per request: 274.525 [ms] (mean)
Time per request: 54.905 [ms] (mean, across all concurrent requests)
Transfer rate: 186508.03 [Kbytes/sec] received
sw-gso:
Concurrency Level: 5
Time taken for tests: 3.852 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 25.96 [#/sec] (mean)
Time per request: 192.576 [ms] (mean)
Time per request: 38.515 [ms] (mean, across all concurrent requests)
Transfer rate: 265874.92 [Kbytes/sec] received
w/o gso:
$ ./tcp_benchmark --client --duration 15 --ideal
[SUM] 0.0-15.1 sec 2.20 GBytes 1.25 Gbits/sec
software gso:
$ tcp_benchmark --client --duration 15 --ideal --gso $((1<<16)) --swgso
[SUM] 0.0-15.1 sec 3.99 GBytes 2.26 Gbits/sec
PiperOrigin-RevId: 276112677
|
|
Like (AF_INET, SOCK_RAW) sockets, AF_PACKET sockets require CAP_NET_RAW. With
runsc, you'll need to pass `--net-raw=true` to enable them.
Binding isn't supported yet.
PiperOrigin-RevId: 275909366
|
|
Fixes #763
PiperOrigin-RevId: 275563222
|
|
Netstack has its own stats, we use this to fill /proc/net/snmp.
Note that some metrics are not recorded in Netstack, which will be shown
as 0 in the proc file.
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: Ie0089184507d16f49bc0057b4b0482094417ebe1
|
|
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
|
|
PiperOrigin-RevId: 274700093
|
|
PiperOrigin-RevId: 274672346
|
|
PiperOrigin-RevId: 273861936
|
|
Also change the default TTL to 64 to match Linux.
PiperOrigin-RevId: 273430341
|
|
The behavior for sending and receiving local broadcast (255.255.255.255)
traffic is as follows:
Outgoing
--------
* A broadcast packet sent on a socket that is bound to an interface goes out
that interface
* A broadcast packet sent on an unbound socket follows the route table to
select the outgoing interface
+ if an explicit route entry exists for 255.255.255.255/32, use that one
+ else use the default route
* Broadcast packets are looped back and delivered following the rules for
incoming packets (see next). This is the same behavior as for multicast
packets, except that it cannot be disabled via sockopt.
Incoming
--------
* Sockets wishing to receive broadcast packets must bind to either INADDR_ANY
(0.0.0.0) or INADDR_BROADCAST (255.255.255.255). No other socket receives
broadcast packets.
* Broadcast packets are multiplexed to all sockets matching it. This is the
same behavior as for multicast packets.
* A socket can bind to 255.255.255.255:<port> and then receive its own
broadcast packets sent to 255.255.255.255:<port>
In addition, this change implicitly fixes an issue with multicast reception. If
two sockets want to receive a given multicast stream and one is bound to ANY
while the other is bound to the multicast address, only one of them will
receive the traffic.
PiperOrigin-RevId: 272792377
|
|
Netstack always picks a random start point everytime PickEphemeralPort
is called. While this is required for UDP so that DNS requests go
out through a randomized set of ports it is not required for TCP. Infact
Linux explicitly hashes the (srcip, dstip, dstport) and a one time secret
initialized at start of the application to get a random offset. But to
ensure it doesn't start from the same point on every scan it uses a static
hint that is incremented by 2 in every call to pick ephemeral ports.
The reason for 2 is Linux seems to split the port ranges where active connects
seem to use even ones while odd ones are used by listening sockets.
This CL implements a similar strategy where we use a hash + hint to generate
the offset to start the search for a free Ephemeral port.
This ensures that we cycle through the available port space in order for
repeated connects to the same destination and significantly reduces the
chance of picking a recently released port.
PiperOrigin-RevId: 272058370
|
|
PiperOrigin-RevId: 271644926
|
|
Also removes the need for protocol names.
PiperOrigin-RevId: 271186030
|
|
PiperOrigin-RevId: 270763208
|
|
This also allows the tee(2) implementation to be enabled, since dup can now be
properly supported via WriteTo.
Note that this change necessitated some minor restructoring with the
fs.FileOperations splice methods. If the *fs.File is passed through directly,
then only public API methods are accessible, which will deadlock immediately
since the locking is already done by fs.Splice. Instead, we pass through an
abstract io.Reader or io.Writer, which elide locks and use the underlying
fs.FileOperations directly.
PiperOrigin-RevId: 268805207
|
|
They are no-ops, so the standard rule works fine.
PiperOrigin-RevId: 268776264
|
|
Fix a bug where udp.(*endpoint).Disconnect [accessible in gVisor via
epsocket.(*SocketOperations).Connect with AF_UNSPEC] would leak a port
reservation if the socket/endpoint had an ephemeral port assigned to it.
glibc's getaddrinfo uses connect with AF_UNSPEC, causing each call of
getaddrinfo to leak a port. Call getaddrinfo too many times and you run out of
ports (shows up as connect returning EAGAIN and getaddrinfo returning
EAI_NONAME "Name or service not known").
PiperOrigin-RevId: 268071160
|
|
PiperOrigin-RevId: 267709597
|
|
There are a few cases addressed by this change
- We no longer generate a RST in response to a RST packet.
- When we receive a RST we cleanup and release all reservations immediately as
the connection is now aborted.
- An ACK received by a listening socket generates a RST when SYN cookies are not
in-use. The only reason an ACK should land at the listening socket is if we
are using SYN cookies otherwise the goroutine for the handshake in progress
should have gotten the packet and it should never have arrived at the
listening endpoint.
- Also fixes the error returned when a connection times out due to a
Keepalive timer expiration from ECONNRESET to a ETIMEDOUT.
PiperOrigin-RevId: 267238427
|
|
Adds support to generate Port Unreachable messages for UDP
datagrams received on a port for which there is no valid
endpoint.
Fixes #703
PiperOrigin-RevId: 267034418
|
|
PiperOrigin-RevId: 266229756
|
|
Add missing state transition to LastAck, which should happen when the
endpoint has already recieved a FIN from the remote side, and is
sending its own FIN.
PiperOrigin-RevId: 265568314
|
|
This fixes the issue of not being able to bind to either a multicast or
broadcast address as well as to send and receive data from it. The way to solve
this is to treat these addresses similar to the ANY address and register their
transport endpoint ID with the global stack's demuxer rather than the NIC's.
That way there is no need to require an endpoint with that multicast or
broadcast address. The stack's demuxer is in fact the only correct one to use,
because neither broadcast- nor multicast-bound sockets care which NIC a
packet was received on (for multicast a join is still needed to receive packets
on a NIC).
I also took the liberty of refactoring udp_test.go to consolidate a lot of
duplicate code and make it easier to create repetitive tests that test the same
feature for a variety of packet and socket types. For this purpose I created a
"flowType" that represents two things: 1) the type of packet being sent or
received and 2) the type of socket used for the test. E.g., a "multicastV4in6"
flow represents a V4-mapped multicast packet run through a V6-dual socket.
This allows writing significantly simpler tests. A nice example is testTTL().
PiperOrigin-RevId: 264766909
|
|
This is the first step in replacing some of the redundant types with the
standard library equivalents.
PiperOrigin-RevId: 264706552
|
|
Linux allows to call connect for ANY and the zero port.
PiperOrigin-RevId: 263892534
|
|
These errors are always pointers; there's no sense in dereferencing them
in the panic call. Changed one false positive for clarity.
PiperOrigin-RevId: 263611579
|
|
13a98df rearranged some of this code in a way that broke compilation of
the netstack-only export at github.com/google/netstack because
*_state.go files are not included in that export.
This commit moves resumption logic back into *_state.go, fixing the
compilation breakage.
PiperOrigin-RevId: 263601629
|
|
This is in accordance with newer parts of the standard library.
PiperOrigin-RevId: 263449916
|
|
SendMsg before this change would copy all the data over into a
new slice even if the underlying socket could only accept a
small amount of data. This is really inefficient with non-blocking
sockets and under high throughput where large writes could get
ErrWouldBlock or if there was say a timeout associated with the sendmsg()
syscall.
With this change we delay copying bytes in till they are needed and only
copy what can be potentially sent/held in the socket buffer. Reducing
the need to repeatedly copy data over.
Also a minor fix to change state FIN-WAIT-1 when shutdown(..., SHUT_WR) is called
instead of when we transmit the actual FIN. Otherwise the socket could remain in
CONNECTED state even though the user has called shutdown() on the socket.
Updates #627
PiperOrigin-RevId: 263430505
|
|
This change just introduces different congestion control states and
ensures the sender.state is updated to reflect the current state
of the connection.
It is not used for any decisions yet but this is required before
algorithms like Eiffel/PRR can be implemented.
Fixes #394
PiperOrigin-RevId: 262638292
|
|
Endpoint protocol goroutines were previously started as part of
loading the endpoint. This is potentially too soon, as resources used
by these goroutine may not have been loaded. Protocol goroutines may
perform meaningful work as soon as they're started (ex: incoming
connect) which can cause them to indirectly access resources that
haven't been loaded yet.
This CL defers resuming all protocol goroutines until the end of
restore.
PiperOrigin-RevId: 262409429
|
|
This can happen because endpoint.Close() closes the accept channel first and
then drains/resets any accepted but not delivered connections. But there can be
connections that are connected but not delivered to the channel as the channel
was full. But closing the channel can cause these writes to fail with a write to
a closed channel.
The correct solution is to abort any connections in SYN-RCVD state and
drain/abort all completed connections before closing the accept channel.
PiperOrigin-RevId: 261951132
|
|
PiperOrigin-RevId: 261413396
|
|
PiperOrigin-RevId: 261373749
|
|
Export some readily-available fields for TCP_INFO and stub out the rest.
PiperOrigin-RevId: 261191548
|
|
This doesn't currently pass on gVisor.
While I'm here, fix a bug where connecting to the v6-mapped v4 address doesn't
work in gVisor.
PiperOrigin-RevId: 260923961
|
|
This allows the user code to add a network address with a subnet prefix length.
The prefix length value is stored in the network endpoint and provided back to
the user in the ProtocolAddress type.
PiperOrigin-RevId: 259807693
|
|
This fixes a bug introduced in cl/251934850 that caused
connect-accept-close-connect races to result in the second connect call
failiing when it should have succeeded.
PiperOrigin-RevId: 259584525
|
|
This tweaks the handling code for IP_MULTICAST_IF to ignore the InterfaceAddr
if a NICID is given.
PiperOrigin-RevId: 258982541
|
|
PiperOrigin-RevId: 258859507
|
|
PiperOrigin-RevId: 258424489
|
|
iptables also relies on IPPROTO_RAW in a way. It opens such a socket to
manipulate the kernel's tables, but it doesn't actually use any of the
functionality. Blegh.
PiperOrigin-RevId: 257903078
|
|
Adds support to set/get the TCP_MAXSEG value but does not
really change the segment sizes emitted by netstack or
alter the MSS advertised by the endpoint. This is currently
being added only to unblock iperf3 on gVisor. Plumbing
this correctly requires a bit more work which will come
in separate CLs.
PiperOrigin-RevId: 257859112
|
|
PiperOrigin-RevId: 256433283
|
|
Addresses obvious typos, in the documentation only.
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65
PiperOrigin-RevId: 255477779
|