Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 242704699
Change-Id: I87db368ca343b3b4bf4f969b17d3aa4ce2f8bd4f
|
|
Having raw socket code together will make it easier to add support for other raw
network protocols. Currently, only ICMP uses the raw endpoint. However, adding
support for other protocols such as UDP shouldn't be much more difficult than
adding a few switch cases.
PiperOrigin-RevId: 241564875
Change-Id: I77e03adafe4ce0fd29ba2d5dfdc547d2ae8f25bf
|
|
The linux packet socket can handle GSO packets, so we can segment packets to
64K instead of the MTU which is usually 1500.
Here are numbers for the nginx-1m test:
runsc: 579330.01 [Kbytes/sec] received
runsc-gso: 1794121.66 [Kbytes/sec] received
runc: 2122139.06 [Kbytes/sec] received
and for tcp_benchmark:
$ tcp_benchmark --duration 15 --ideal
[ 4] 0.0-15.0 sec 86647 MBytes 48456 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal
[ 4] 0.0-15.0 sec 2173 MBytes 1214 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal --gso 65536
[ 4] 0.0-15.0 sec 19357 MBytes 10825 Mbits/sec
PiperOrigin-RevId: 240809103
Change-Id: I2637f104db28b5d4c64e1e766c610162a195775a
|
|
See: https://tools.ietf.org/html/rfc6691#section-2
PiperOrigin-RevId: 239305632
Change-Id: Ie8eb912a43332e6490045dc95570709c5b81855e
|
|
PiperOrigin-RevId: 238467634
Change-Id: If4cd8efff7386fbee1195f051d15549b495910a9
|
|
IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default
route are looped back. In order to implement this switch, support for sending
and looping back multicast packets on the default route had to be implemented.
For now we only support IPv4 multicast.
PiperOrigin-RevId: 237534603
Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
|
|
PiperOrigin-RevId: 236926132
Change-Id: I5cf103f22766e6e65a581de780c7bb9ca0fa3181
|
|
Broadly, this change:
* Enables sockets to be created via `socket(AF_INET, SOCK_RAW, IPPROTO_ICMP)`.
* Passes the network-layer (IP) header up the stack to the transport endpoint,
which can pass it up to the socket layer. This allows a raw socket to return
the entire IP packet to users.
* Adds functions to stack.TransportProtocol, stack.Stack, stack.transportDemuxer
that enable incoming packets to be delivered to raw endpoints. New raw sockets
of other protocols (not ICMP) just need to register with the stack.
* Enables ping.endpoint to return IP headers when created via SOCK_RAW.
PiperOrigin-RevId: 235993280
Change-Id: I60ed994f5ff18b2cbd79f063a7fdf15d093d845a
|
|
This change does not make use of SACK information but adds support to track
SACK information and store it in the endpoint.
The actual SACK based recovery will be in a separate CL.
Part of commits to add RFC 6675 support to Netstack.
PiperOrigin-RevId: 235612264
Change-Id: I261f94844d7bad5abda803152ce6cc6125a467ff
|
|
This change adds support for the SO_BROADCAST socket option in gVisor Netstack.
This support includes getsockopt()/setsockopt() functionality for both UDP and
TCP endpoints (the latter being a NOOP), dispatching broadcast messages up and
down the stack, and route finding/creation for broadcast packets. Finally, a
suite of tests have been implemented, exercising this functionality through the
Linux syscall API.
PiperOrigin-RevId: 234850781
Change-Id: If3e666666917d39f55083741c78314a06defb26c
|
|
PiperOrigin-RevId: 229243918
Change-Id: Ie14ef34e66ae851ed080f57b7d26a369a66f7664
|
|
This option allows multiple sockets to be bound to the same port.
Incoming packets are distributed to sockets using a hash based on source and
destination addresses. This means that all packets from one sender will be
received by the same server socket.
PiperOrigin-RevId: 227153413
Change-Id: I59b6edda9c2209d5b8968671e9129adb675920cf
|
|
We don't explicitly support out-of-band data and treat it like normal in-band
data. This is equilivent to SO_OOBINLINE being enabled, so always report that
it is enabled.
PiperOrigin-RevId: 226572742
Change-Id: I4c30ccb83265e76c30dea631cbf86822e6ee1c1b
|
|
Within gVisor, plumb new socket options to netstack.
Within netstack, fix GetSockOpt and SetSockOpt return value logic.
PiperOrigin-RevId: 226532229
Change-Id: If40734e119eed633335f40b4c26facbebc791c74
|
|
PiperOrigin-RevId: 224696233
Change-Id: I45c425d9e32adee5dcce29ca7439a06567b26014
|
|
* Clarify tcpip.Endpoint.Write contract regarding short writes.
* Enforce tcpip.Endpoint.Write contract regarding short writes.
* Update relevant users of tcpip.Endpoint.Write.
PiperOrigin-RevId: 224377586
Change-Id: I24299ecce902eb11317ee13dae3b8d8a7c5b097d
|
|
Moving the wakeup logic into the disable blocks is an optimization.
PiperOrigin-RevId: 221677028
Change-Id: Ib5a5a6d52cc77b4bbc5dedcad9ee1dbb3da98deb
|
|
Previously, TCP_NODELAY was always enabled and we would lie about it being
configurable. TCP_NODELAY is now disabled by default (to match Linux) in the
socket layer so that non-gVisor users don't automatically start using this
questionable optimization.
PiperOrigin-RevId: 221368472
Change-Id: Ib0240f66d94455081f4e0ca94f09d9338b2c1356
|
|
PiperOrigin-RevId: 220185891
Change-Id: Iaea73fd7b2fa8c399b989cdcaabf4885f370df4b
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
Previously, if address resolution for UDP or Ping sockets required sending
packets using Write in Transport layer, Resolve would return ErrWouldBlock
and Write would return ErrNoLinkAddress. Meanwhile startAddressResolution
would run in background. Further calls to Write using same address would also
return ErrNoLinkAddress until resolution has been completed successfully.
Since Write is not allowed to block and System Calls need to be
interruptible in System Call layer, the caller to Write is responsible for
blocking upon return of ErrWouldBlock.
Now, when startAddressResolution is called a notification channel for
the completion of the address resolution is returned.
The channel will traverse up to the calling function of Write as well as
ErrNoLinkAddress. Once address resolution is complete (success or not) the
channel is closed. The caller would call Write again to send packets and
check if address resolution was compeleted successfully or not.
Fixes google/gvisor#5
Change-Id: Idafaf31982bee1915ca084da39ae7bd468cebd93
PiperOrigin-RevId: 214962200
|
|
tcp.endpoint.hardError is protected by tcp.endpoint.mu.
PiperOrigin-RevId: 213730698
Change-Id: I4e4f322ac272b145b500b1a652fbee0c7b985be2
|
|
PiperOrigin-RevId: 213387851
Change-Id: Icc6850761bc11afd0525f34863acd77584155140
|
|
PiperOrigin-RevId: 212757571
Change-Id: I04200df9e45c21eb64951cd2802532fa84afcb1a
|
|
PiperOrigin-RevId: 211670620
Change-Id: Ia8a3d8ae53a7fece1dee08ee9c74964bd7f71bb7
|
|
PiperOrigin-RevId: 211504634
Change-Id: I9a7bcbbdd40e5036894930f709278725ef477293
|
|
PiperOrigin-RevId: 210442599
Change-Id: I9498351f461dc69c77b7f815d526c5693bec8e4a
|
|
PiperOrigin-RevId: 209943212
Change-Id: I96dcbc7c2ab2426e510b94a564436505256c5c79
|
|
PiperOrigin-RevId: 207754087
Change-Id: I83abce64348ea93f8692da81a881b364dae2158b
|
|
PiperOrigin-RevId: 207715032
Change-Id: I7b6690074c5be283145192895d706a92e921b22c
|
|
This CL implements CUBIC as described in https://tools.ietf.org/html/rfc8312.
PiperOrigin-RevId: 207353142
Change-Id: I329cbf3277f91127e99e488f07d906f6779c6603
|
|
PiperOrigin-RevId: 207125440
Change-Id: I6c572afb4d693ee72a0c458a988b0e96d191cd49
|
|
PiperOrigin-RevId: 207037226
Change-Id: I8b5f1a056d4f3eab17846f2e0193bb737ecb5428
|
|
PiperOrigin-RevId: 207007153
Change-Id: Ifedf1cc3758dc18be16647a4ece9c840c1c636c9
|
|
PiperOrigin-RevId: 204356873
Change-Id: I5e2f885f58678e693aae1a69e8bf8084a685af28
|
|
PiperOrigin-RevId: 203958972
Change-Id: Ia6fe16547539296d48e2c6731edacdd96bd6e93c
|
|
PiperOrigin-RevId: 203880278
Change-Id: I66b790a616de59142859cc12db4781b57ea626d3
|
|
Fixes #27
PiperOrigin-RevId: 203825288
Change-Id: Ie9f3a2b2c1e296b026b024f75c07da1a7e118633
|
|
There is a subtle bug where during cleanup with unread data a FIN can
be converted to a RST, at that point the entire connection should be
aborted as we're not expecting any ACKs to the RST.
PiperOrigin-RevId: 202691271
Change-Id: Idae70800208ca26e07a379bc6b2b8090805d0a22
|
|
PiperOrigin-RevId: 202151720
Change-Id: I0491172c436bbb32b977f557953ba0bc41cfe299
|
|
PiperOrigin-RevId: 201596247
Change-Id: Id22f47b2cdcbe14aa0d930f7807ba75f91a56724
|
|
PiperOrigin-RevId: 200784607
Change-Id: I39aa6ee632936dcbb00fc298adccffa606e9f4c0
|
|
So that when saving TCP endpoint in these states, there is no pending or
background activities.
Also lift tcp network save rejection error to tcpip package.
PiperOrigin-RevId: 199370748
Change-Id: Ief7b45c2a7338d12414cd7c23db95de6a9c22700
|
|
PiperOrigin-RevId: 198457660
Change-Id: I6ea5cf0b4cfe2b5ba455325a7e5299880e5a088a
|
|
So that when saving TCP endpoint in these states, there is no pending or
background activities.
Also lift tcp network save rejection error to tcpip package.
PiperOrigin-RevId: 196886839
Change-Id: I0fe73750f2743ec7e62d139eb2cec758c5dd6698
|
|
PiperOrigin-RevId: 196325647
Change-Id: I850eb4a29b9c679da4db10eb164bbdf967690663
|
|
PiperOrigin-RevId: 195047018
Change-Id: I6d99528a00a2125f414e1e51e067205289ec9d3d
|
|
PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
|