summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/tcpip.go
AgeCommit message (Collapse)Author
2020-09-09Clarify comment on NetworkProtocolNumber.Bhasker Hariharan
The actual values used for this field in Netstack are actually EtherType values of the protocol in an Ethernet frame. Eg. header.IPv4ProtocolNumber is 0x0800 and not the number of the IPv4 Protocol Number itself which is 4. Similarly header.IPv6ProtocolNumber is set to 0x86DD whereas the IPv6 protocol number is 41. See: - https://www.iana.org/assignments/ieee-802-numbers/ieee-802-numbers.xhtml (For EtherType) - https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml (For ProtocolNumbers) PiperOrigin-RevId: 328407293
2020-09-09Add option to replace linkAddrCache with neighborCacheSam Balana
This change adds an option to replace the current implementation of ARP through linkAddrCache, with an implementation of NUD through neighborCache. Switching to using NUD for both ARP and NDP is beneficial for the reasons described by RFC 4861 Section 3.1: "[Using NUD] significantly improves the robustness of packet delivery in the presence of failing routers, partially failing or partitioned links, or nodes that change their link-layer addresses. For instance, mobile nodes can move off-link without losing any connectivity due to stale ARP caches." "Unlike ARP, Neighbor Unreachability Detection detects half-link failures and avoids sending traffic to neighbors with which two-way connectivity is absent." Along with these changes exposes the API for querying and operating the neighbor cache. Operations include: - Create a static entry - List all entries - Delete all entries - Remove an entry by address This also exposes the API to change the NUD protocol constants on a per-NIC basis to allow Neighbor Discovery to operate over links with widely varying performance characteristics. See [RFC 4861 Section 10][1] for the list of constants. Finally, an API for subscribing to NUD state changes is exposed through NUDDispatcher. See [RFC 4861 Appendix C][3] for the list of edges. Tests: pkg/tcpip/network/arp:arp_test + TestDirectRequest pkg/tcpip/network/ipv6:ipv6_test + TestLinkResolution + TestNDPValidation + TestNeighorAdvertisementWithTargetLinkLayerOption + TestNeighorSolicitationResponse + TestNeighorSolicitationWithSourceLinkLayerOption + TestRouterAdvertValidation pkg/tcpip/stack:stack_test + TestCacheWaker + TestForwardingWithFakeResolver + TestForwardingWithFakeResolverManyPackets + TestForwardingWithFakeResolverManyResolutions + TestForwardingWithFakeResolverPartialTimeout + TestForwardingWithFakeResolverTwoPackets + TestIPv6SourceAddressSelectionScopeAndSameAddress [1]: https://tools.ietf.org/html/rfc4861#section-10 [2]: https://tools.ietf.org/html/rfc4861#appendix-C Fixes #1889 Fixes #1894 Fixes #1895 Fixes #1947 Fixes #1948 Fixes #1949 Fixes #1950 PiperOrigin-RevId: 328365034
2020-09-09Support SO_LINGER socket option.Nayana Bidari
When SO_LINGER option is enabled, the close will not return until all the queued messages are sent and acknowledged for the socket or linger timeout is reached. If the option is not set, close will return immediately. This option is mainly supported for connection oriented protocols such as TCP. PiperOrigin-RevId: 328350576
2020-08-13Ensure TCP TIME-WAIT is not terminated prematurely.Bhasker Hariharan
Netstack's TIME-WAIT state for a TCP socket could be terminated prematurely if the socket entered TIME-WAIT using shutdown(..., SHUT_RDWR) and then was closed using close(). This fixes that bug and updates the tests to verify that Netstack correctly honors TIME-WAIT under such conditions. Fixes #3106 PiperOrigin-RevId: 326456443
2020-08-10Populate IPPacketInfo with destination addressGhanan Gowripalan
IPPacketInfo.DestinationAddr should hold the destination of the IP packet, not the source. This change fixes that bug. PiperOrigin-RevId: 325910766
2020-07-31iptables: support SO_ORIGINAL_DSTKevin Krakauer
Envoy (#170) uses this to get the original destination of redirected packets.
2020-07-30Use brodcast MAC for broadcast IPv4 packetsGhanan Gowripalan
When sending packets to a known network's broadcast address, use the broadcast MAC address. Test: - stack_test.TestOutgoingSubnetBroadcast - udp_test.TestOutgoingSubnetBroadcast PiperOrigin-RevId: 324062407
2020-07-23Add AfterFunc to tcpip.ClockSam Balana
Changes the API of tcpip.Clock to also provide a method for scheduling and rescheduling work after a specified duration. This change also implements the AfterFunc method for existing implementations of tcpip.Clock. This is the groundwork required to mock time within tests. All references to CancellableTimer has been replaced with the tcpip.Job interface, allowing for custom implementations of scheduling work. This is a BREAKING CHANGE for clients that implement their own tcpip.Clock or use tcpip.CancellableTimer. Migration plan: 1. Add AfterFunc(d, f) to tcpip.Clock 2. Replace references of tcpip.CancellableTimer with tcpip.Job 3. Replace calls to tcpip.CancellableTimer#StopLocked with tcpip.Job#Cancel 4. Replace calls to tcpip.CancellableTimer#Reset with tcpip.Job#Schedule 5. Replace calls to tcpip.NewCancellableTimer with tcpip.NewJob. PiperOrigin-RevId: 322906897
2020-07-22Support for receiving outbound packets in AF_PACKET.Bhasker Hariharan
Updates #173 PiperOrigin-RevId: 322665518
2020-07-16Add support to return protocol in recvmsg for AF_PACKET.Bhasker Hariharan
Updates #173 PiperOrigin-RevId: 321690756
2020-07-11Stub out SO_DETACH_FILTER.Bhasker Hariharan
Updates #2746 PiperOrigin-RevId: 320757963
2020-07-09Discard multicast UDP source address.gVisor bot
RFC-1122 (and others) specify that UDP should not receive datagrams that have a source address that is a multicast address. Packets should never be received FROM a multicast address. See also, RFC 768: 'User Datagram Protocol' J. Postel, ISI, 28 August 1980 A UDP datagram received with an invalid IP source address (e.g., a broadcast or multicast address) must be discarded by UDP or by the IP layer (see rfc 1122 Section 3.2.1.3). This CL does not address TCP or broadcast which is more complicated. Also adds a test for both ipv6 and ipv4 UDP. Fixes #3154 PiperOrigin-RevId: 320547674
2020-07-09Add support for IP_HDRINCL IP option for raw sockets.Bhasker Hariharan
Updates #2746 Fixes #3158 PiperOrigin-RevId: 320497190
2020-07-07Set IPv4 ID on all non-atomic datagramsTony Gong
RFC 6864 imposes various restrictions on the uniqueness of the IPv4 Identification field for non-atomic datagrams, defined as an IP datagram that either can be fragmented (DF=0) or is already a fragment (MF=1 or positive fragment offset). In order to be compliant, the ID field is assigned for all non-atomic datagrams. Add a TCP unit test that induces retransmissions and checks that the IPv4 ID field is unique every time. Add basic handling of the IP_MTU_DISCOVER socket option so that the option can be used to disable PMTU discovery, effectively setting DF=0. Attempting to set the sockopt to anything other than disabled will fail because PMTU discovery is currently not implemented, and the default behavior matches that of disabled. PiperOrigin-RevId: 320081842
2020-06-26Implement SO_NO_CHECK socket option.gVisor bot
SO_NO_CHECK is used to skip the UDP checksum generation on a TX socket (UDP checksum is optional on IPv4). Test: - TestNoChecksum - SoNoCheckOffByDefault (UdpSocketTest) - SoNoCheck (UdpSocketTest) Fixes #3055 PiperOrigin-RevId: 318575215
2020-06-24Add support for Stack level options.Bhasker Hariharan
Linux controls socket send/receive buffers using a few sysctl variables - net.core.rmem_default - net.core.rmem_max - net.core.wmem_max - net.core.wmem_default - net.ipv4.tcp_rmem - net.ipv4.tcp_wmem The first 4 control the default socket buffer sizes for all sockets raw/packet/tcp/udp and also the maximum permitted socket buffer that can be specified in setsockopt(SOL_SOCKET, SO_(RCV|SND)BUF,...). The last two control the TCP auto-tuning limits and override the default specified in rmem_default/wmem_default as well as the max limits. Netstack today only implements tcp_rmem/tcp_wmem and incorrectly uses it to limit the maximum size in setsockopt() as well as uses it for raw/udp sockets. This changelist introduces the other 4 and updates the udp/raw sockets to use the newly introduced variables. The values for min/max match the current tcp_rmem/wmem values and the default value buffers for UDP/RAW sockets is updated to match the linux value of 212KiB up from the really low current value of 32 KiB. Updates #3043 Fixes #3043 PiperOrigin-RevId: 318089805
2020-06-19Implement UDP cheksum verification.gVisor bot
Test: - TestIncrementChecksumErrors Fixes #2943 PiperOrigin-RevId: 317348158
2020-06-18Support setsockopt SO_SNDBUF/SO_RCVBUF for raw/udp sockets.Bhasker Hariharan
Updates #173,#6 Fixes #2888 PiperOrigin-RevId: 317087652
2020-05-20Internal change.gVisor bot
PiperOrigin-RevId: 312559963
2020-05-13Fix TCP segment retransmit timeout handling.Mithun Iyer
As per RFC 1122 and Linux retransmit timeout handling: - The segment retransmit timeout needs to exponentially increase and cap at a predefined value. - TCP connection needs to timeout after a predefined number of segment retransmissions. - TCP connection should not timeout when the retranmission timeout exceeds MaxRTO, predefined upper bound. Fixes #2673 PiperOrigin-RevId: 311463961
2020-05-13Stub support for TCP_SYNCNT and TCP_WINDOW_CLAMP.Bhasker Hariharan
This change adds support for TCP_SYNCNT and TCP_WINDOW_CLAMP options in GetSockOpt/SetSockOpt. This change does not really change any behaviour in Netstack and only stores/returns the stored value. Actual honoring of these options will be added as required. Fixes #2626, #2625 PiperOrigin-RevId: 311453777
2020-04-16Fix data race in tcp_test.Bhasker Hariharan
This change makes SynRcvdCountThreshold and the global synRcvdCount into a stack configurable value. This is required because in cases like mod_proxy which create multiple Stack instances the count will be a global value that impacts all Stack instances. Further the tests relied on modifying the global threshold to simulate tests where we want to verify SYN cookie based behaviour. This lead to data races due to the global being modified/read without locks or atomics. PiperOrigin-RevId: 306947723
2020-04-14Reduce flakiness in tcp_test.Bhasker Hariharan
Tests now use a MinRTO of 3s instead of default 200ms. This reduced flakiness in a lot of the congestion control/recovery tests which were flaky due to retransmit timer firing too early in case the test executors were overloaded. This change also bumps some of the timeouts in tests which were too sensitive to timer variations and reduces the number of slow start iterations which can make the tests run for too long and also trigger retansmit timeouts etc if the executor is overloaded. PiperOrigin-RevId: 306562645
2020-04-09Convert int and bool socket options to use GetSockOptInt and GetSockOptBoolAndrei Vagin
PiperOrigin-RevId: 305699233
2020-03-26Support owner matching for iptables.Nayana Bidari
This feature will match UID and GID of the packet creator, for locally generated packets. This match is only valid in the OUTPUT and POSTROUTING chains. Forwarded packets do not have any socket associated with them. Packets from kernel threads do have a socket, but usually no owner.
2020-02-24Add support for tearing down protocol dispatchers and TIME_WAIT endpoints.Ian Gudger
Protocol dispatchers were previously leaked. Bypassing TIME_WAIT is required to test this change. Also fix a race when a socket in SYN-RCVD is closed. This is also required to test this change. PiperOrigin-RevId: 296922548
2020-02-18Enable IPV6_RECVTCLASS socket option for datagram socketsgVisor bot
Added the ability to get/set the IP_RECVTCLASS socket option on UDP endpoints. If enabled, traffic class from the incoming Network Header passed as ancillary data in the ControlMessages. Adding Get/SetSockOptBool to decrease the overhead of getting/setting simple options. (This was absorbed in a CL that will be landing before this one). Test: * Added unit test to udp_test.go that tests getting/setting as well as verifying that we receive expected TOS from incoming packet. * Added a syscall test for verifying getting/setting * Removed test skip for existing syscall test to enable end to end test. PiperOrigin-RevId: 295840218
2020-02-13Internal change.gVisor bot
PiperOrigin-RevId: 294952610
2020-02-06Perform DAD on IPv6 addresses when enabling a NICGhanan Gowripalan
Addresses may be added before a NIC is enabled. Make sure DAD is performed on the permanent IPv6 addresses when they get enabled. Test: - stack_test.TestDoDADWhenNICEnabled - stack.TestDisabledRxStatsWhenNICDisabled PiperOrigin-RevId: 293697429
2020-02-05recv() on a closed TCP socket returns ENOTCONNEyal Soha
From RFC 793 s3.9 p58 Event Processing: If RECEIVE Call arrives in CLOSED state and the user has access to such a connection, the return should be "error: connection does not exist" Fixes #1598 PiperOrigin-RevId: 293494287
2020-01-29Add support for TCP_DEFER_ACCEPT.Bhasker Hariharan
PiperOrigin-RevId: 292233574
2020-01-21Add a new TCP stat for current open connections.Mithun Iyer
Such a stat accounts for all connections that are currently established and not yet transitioned to close state. Also fix bug in double increment of CurrentEstablished stat. Fixes #1579 PiperOrigin-RevId: 290827365
2020-01-21Merge pull request #1558 from kevinGC:iptables-write-input-dropgVisor bot
PiperOrigin-RevId: 290793754
2020-01-17Filter out received packets with a local source IP address.Eyal Soha
CERT Advisory CA-96.21 III. Solution advises that devices drop packets which could not have correctly arrived on the wire, such as receiving a packet where the source IP address is owned by the device that sent it. Fixes #1507 PiperOrigin-RevId: 290378240
2020-01-14Implement {g,s}etsockopt(IP_RECVTOS) for UDP socketsTamir Duberstein
PiperOrigin-RevId: 289718534
2020-01-13Merge branch 'master' into iptables-write-input-dropKevin Krakauer
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2020-01-09Change BindToDeviceOption to store NICIDEyal Soha
This makes it possible to call the sockopt from go even when the NIC has no name. PiperOrigin-RevId: 288955236
2020-01-08Getting a panic when running tests. For some reason the filter table isKevin Krakauer
ending up with the wrong chains and is indexing -1 into rules.
2020-01-08Introduce tcpip.SockOptBoolTamir Duberstein
...and port V6OnlyOption to it. PiperOrigin-RevId: 288789451
2020-01-08Rename tcpip.SockOpt{,Int}Tamir Duberstein
PiperOrigin-RevId: 288772878
2019-12-26Automated rollback of changelist 287029703gVisor bot
PiperOrigin-RevId: 287217899
2019-12-24Enable IP_RECVTOS socket option for datagram socketsRyan Heacock
Added the ability to get/set the IP_RECVTOS socket option on UDP endpoints. If enabled, TOS from the incoming Network Header passed as ancillary data in the ControlMessages. Test: * Added unit test to udp_test.go that tests getting/setting as well as verifying that we receive expected TOS from incoming packet. * Added a syscall test PiperOrigin-RevId: 287029703
2019-12-11Add support for TCP_USER_TIMEOUT option.Bhasker Hariharan
The implementation follows the linux behavior where specifying a TCP_USER_TIMEOUT will cause the resend timer to honor the user specified timeout rather than the default rto based timeout. Further it alters when connections are timedout due to keepalive failures. It does not alter the behavior of when keepalives are sent. This is as per the linux behavior. PiperOrigin-RevId: 285099795
2019-12-06Add TCP stats for connection close and keep-alive timeouts.Mithun Iyer
Fix bugs in updates to TCP CurrentEstablished stat. Fixes #1277 PiperOrigin-RevId: 284292459
2019-11-27Add support for receiving TOS and TCLASS control messages in hostinet.Dean Deng
This involves allowing getsockopt/setsockopt for the corresponding socket options, as well as allowing hostinet to process control messages received from the actual recvmsg syscall. PiperOrigin-RevId: 282851425
2019-11-07Add support for TIME_WAIT timeout.Bhasker Hariharan
This change adds explicit support for honoring the 2MSL timeout for sockets in TIME_WAIT state. It also adds support for the TCP_LINGER2 option that allows modification of the FIN_WAIT2 state timeout duration for a given socket. It also adds an option to modify the Stack wide TIME_WAIT timeout but this is only for testing. On Linux this is fixed at 60s. Further, we also now correctly process RST's in CLOSE_WAIT and close the socket similar to linux without moving it to error state. We also now handle SYN in ESTABLISHED state as per RFC5961#section-4.1. Earlier we would just drop these SYNs. Which can result in some tests that pass on linux to fail on gVisor. Netstack now honors TIME_WAIT correctly as well as handles the following cases correctly. - TCP RSTs in TIME_WAIT are ignored. - A duplicate TCP FIN during TIME_WAIT extends the TIME_WAIT and a dup ACK is sent in response to the FIN as the dup FIN indicates potential loss of the original final ACK. - An out of order segment during TIME_WAIT generates a dup ACK. - A new SYN w/ a sequence number > the highest sequence number in the previous connection closes the TIME_WAIT early and opens a new connection. Further to make the SYN case work correctly the ISN (Initial Sequence Number) generation for Netstack has been updated to be as per RFC. Its not a pure random number anymore and follows the recommendation in https://tools.ietf.org/html/rfc6528#page-3. The current hash used is not a cryptographically secure hash function. A separate change will update the hash function used to Siphash similar to what is used in Linux. PiperOrigin-RevId: 279106406
2019-11-06Discover default routers from Router AdvertisementsGhanan Gowripalan
This change allows the netstack to do NDP's Router Discovery as outlined by RFC 4861 section 6.3.4. Note, this change will not break existing uses of netstack as the default configuration for the stack options is set in such a way that Router Discovery will not be performed. See `stack.Options` and `stack.NDPConfigurations` for more details. This change introduces 2 options required to take advantage of Router Discovery, all available under NDPConfigurations: - HandleRAs: Whether or not NDP RAs are processes - DiscoverDefaultRouters: Whether or not Router Discovery is performed Another note: for a NIC to process Router Advertisements, it must not be a router itself. Currently the netstack does not have per-interface routing configuration; the routing/forwarding configuration is controlled stack-wide. Therefore, if the stack is configured to enable forwarding/routing, no Router Advertisements will be processed. Tests: Unittest to make sure that Router Discovery and updates to the routing table only occur if explicitly configured to do so. Unittest to make sure at max stack.MaxDiscoveredDefaultRouters discovered default routers are remembered. PiperOrigin-RevId: 278965143
2019-10-25Convert DelayOption to the newer/faster SockOpt int type.Ian Gudger
DelayOption is set on all new endpoints in gVisor. PiperOrigin-RevId: 276746791
2019-10-23Merge pull request #641 from tanjianfeng:mastergVisor bot
PiperOrigin-RevId: 276380008
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 03:37:10 +0000