summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/stack
AgeCommit message (Collapse)Author
2020-02-21Attach LinkEndpoint to NetworkDispatcher immediatelyGhanan Gowripalan
Tests: stack_test.TestAttachToLinkEndpointImmediately PiperOrigin-RevId: 296474068
2020-02-21Use Route.MaxHeaderLength when constructing NDP RSGhanan Gowripalan
Test: stack_test.TestRouterSolicitation PiperOrigin-RevId: 296454766
2020-02-20Support disabling a NICgVisor bot
- Disabled NICs will have their associated NDP state cleared. - Disabled NICs will not accept incoming packets. - Writes through a Route with a disabled NIC will return an invalid endpoint state error. - stack.Stack.FindRoute will not return a route with a disabled NIC. - NIC's Running flag will report the NIC's enabled status. Tests: - stack_test.TestDisableUnknownNIC - stack_test.TestDisabledNICsNICInfoAndCheckNIC - stack_test.TestRoutesWithDisabledNIC - stack_test.TestRouteWritePacketWithDisabledNIC - stack_test.TestStopStartSolicitingRouters - stack_test.TestCleanupNDPState - stack_test.TestAddRemoveIPv4BroadcastAddressOnNICEnableDisable - stack_test.TestJoinLeaveAllNodesMulticastOnNICEnableDisable PiperOrigin-RevId: 296298588
2020-02-18Fix mis-named comment.Kevin Krakauer
2020-02-11Disallow duplicate NIC names.gVisor bot
PiperOrigin-RevId: 294500858
2020-02-06Send DAD event when DAD resolves immediatelyGhanan Gowripalan
Previously, a DAD event would not be sent if DAD was disabled. This allows integrators to do some work when an IPv6 address is bound to a NIC without special logic that checks if DAD is enabled. Without this change, integrators would need to check if a NIC has DAD enabled when an address is auto-generated. If DAD is enabled, it would need to delay the work until the DAD completion event; otherwise, it would need to do the work in the address auto-generated event handler. Test: stack_test.TestDADDisabled PiperOrigin-RevId: 293732914
2020-02-06Auto-generate link-local address as a SLAAC addressGhanan Gowripalan
Auto-generated link-local addresses should have the same lifecycle hooks as global SLAAC addresses. The Stack's NDP dispatcher should be notified when link-local addresses are auto-generated and invalidated. They should also be removed when a NIC is disabled (which will be supported in a later change). Tests: - stack_test.TestNICAutoGenAddrWithOpaque - stack_test.TestNICAutoGenAddr PiperOrigin-RevId: 293706760
2020-02-06Perform DAD on IPv6 addresses when enabling a NICGhanan Gowripalan
Addresses may be added before a NIC is enabled. Make sure DAD is performed on the permanent IPv6 addresses when they get enabled. Test: - stack_test.TestDoDADWhenNICEnabled - stack.TestDisabledRxStatsWhenNICDisabled PiperOrigin-RevId: 293697429
2020-02-06Update link address for targets of Neighbor AdvertsGhanan Gowripalan
Get the link address for the target of an NDP Neighbor Advertisement from the NDP Target Link Layer Address option. Tests: - ipv6.TestNeighorAdvertisementWithTargetLinkLayerOption - ipv6.TestNeighorAdvertisementWithInvalidTargetLinkLayerOption PiperOrigin-RevId: 293632609
2020-02-04Support RTM_NEWADDR and RTM_GETLINK in (rt)netlink.Ting-Yu Wang
PiperOrigin-RevId: 293271055
2020-01-31Use multicast Ethernet address for multicast NDPGhanan Gowripalan
As per RFC 2464 section 7, an IPv6 packet with a multicast destination address is transmitted to the mapped Ethernet multicast address. Test: - ipv6.TestLinkResolution - stack_test.TestDADResolve - stack_test.TestRouterSolicitation PiperOrigin-RevId: 292610529
2020-01-30Do not include the Source Link Layer option with an unspecified source addressGhanan Gowripalan
When sending NDP messages with an unspecified source address, the Source Link Layer address must not be included. Test: stack_test.TestDADResolve PiperOrigin-RevId: 292341334
2020-01-29Do not spawn a goroutine when calling stack.NDPDispatcher's methodsGhanan Gowripalan
Do not start a new goroutine when calling stack.NDPDispatcher.OnDuplicateAddressDetectionStatus. PiperOrigin-RevId: 292268574
2020-01-28Include the NDP Source Link Layer option when sending DAD messagesGhanan Gowripalan
Test: stack_test.TestDADResolve PiperOrigin-RevId: 292003124
2020-01-27Refactor to hide C from channel.Endpoint.Ting-Yu Wang
This is to aid later implementation for /dev/net/tun device. PiperOrigin-RevId: 291746025
2020-01-27Standardize on tools directory.Adin Scannell
PiperOrigin-RevId: 291745021
2020-01-24Lock the NIC when checking if an address is tentativeGhanan Gowripalan
PiperOrigin-RevId: 291426657
2020-01-24Increase timeouts for NDP tests' async eventsGhanan Gowripalan
Increase the timeout to 1s when waiting for async NDP events to help reduce flakiness. This will not significantly increase test times as the async events continue to receive an event on a channel. The increased timeout allows more time for an event to be sent on the channel as the previous timeout of 100ms caused some flakes. Test: Existing tests pass PiperOrigin-RevId: 291420936
2020-01-22Use embedded mutex pattern for stack.NICGhanan Gowripalan
- Wrap NIC's fields that should only be accessed while holding the mutex in an anonymous struct with the embedded mutex. - Make sure NIC's spoofing and promiscuous mode flags are only read while holding the NIC's mutex. - Use the correct endpoint when sending DAD messages. - Do not hold the NIC's lock when sending DAD messages. This change does not introduce any behaviour changes. Tests: Existing tests continue to pass. PiperOrigin-RevId: 291036251
2020-01-21Merge pull request #1558 from kevinGC:iptables-write-input-dropgVisor bot
PiperOrigin-RevId: 290793754
2020-01-17Filter out received packets with a local source IP address.Eyal Soha
CERT Advisory CA-96.21 III. Solution advises that devices drop packets which could not have correctly arrived on the wire, such as receiving a packet where the source IP address is owned by the device that sent it. Fixes #1507 PiperOrigin-RevId: 290378240
2020-01-17Remove addPermanentAddressLockedTamir Duberstein
It was possible to use this function incorrectly, and its separation wasn't buying us anything. PiperOrigin-RevId: 290311100
2020-01-15Support upgrading expired/removed IPv6 addresses to permanent SLAAC addressesGhanan Gowripalan
If a previously added IPv6 address (statically or via SLAAC) was removed, it would be left in an expired state waiting to be cleaned up if any references to it were still held. During this time, the same address could be regenerated via SLAAC, which should be allowed. This change supports this scenario. When upgrading an endpoint from temporary or permanentExpired to permanent, respect the new configuration type (static or SLAAC) and deprecated status, along with the new PrimaryEndpointBehavior (which was already supported). Test: stack.TestAutoGenAddrAfterRemoval PiperOrigin-RevId: 289990168
2020-01-15Solicit IPv6 routers when a NIC becomes enabled as a hostGhanan Gowripalan
This change adds support to send NDP Router Solicitation messages when a NIC becomes enabled as a host, as per RFC 4861 section 6.3.7. Note, Router Solicitations will only be sent when the stack has forwarding disabled. Tests: Unittests to make sure that the initial Router Solicitations are sent as configured. The tests also validate the sent Router Solicitations' fields. PiperOrigin-RevId: 289964095
2020-01-14Changes TCP packet dispatch to use a pool of goroutines.Bhasker Hariharan
All inbound segments for connections in ESTABLISHED state are delivered to the endpoint's queue but for every segment delivered we also queue the endpoint for processing to a selected processor. This ensures that when there are a large number of connections in ESTABLISHED state the inbound packets are all handled by a small number of goroutines and significantly reduces the amount of work the goscheduler has to perform. We let connections in other states follow the current path where the endpoint's goroutine directly handles the segments. Updates #231 PiperOrigin-RevId: 289728325
2020-01-14Implement {g,s}etsockopt(IP_RECVTOS) for UDP socketsTamir Duberstein
PiperOrigin-RevId: 289718534
2020-01-13Do Source Address Selection when choosing an IPv6 source addressGhanan Gowripalan
Do Source Address Selection when choosing an IPv6 source address as per RFC 6724 section 5 rules 1-3: 1) Prefer same address 2) Prefer appropriate scope 3) Avoid deprecated addresses. A later change will update Source Address Selection to follow rules 4-8. Tests: Rule 1 & 2: stack.TestIPv6SourceAddressSelectionScopeAndSameAddress, Rule 3: stack.TestAutoGenAddrTimerDeprecation, stack.TestAutoGenAddrDeprecateFromPI PiperOrigin-RevId: 289559373
2020-01-13Fix test building.Kevin Krakauer
2020-01-13Allow dual stack sockets to operate on AF_INETTamir Duberstein
Fixes #1490 Fixes #1495 PiperOrigin-RevId: 289523250
2020-01-13Merge branch 'master' into iptables-write-input-dropKevin Krakauer
2020-01-10Automated rollback of changelist 288990597Ghanan Gowripalan
PiperOrigin-RevId: 289169518
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2020-01-09Inform NDPDispatcher when Stack learns about available configurations via DHCPv6Ghanan Gowripalan
Inform the Stack's NDPDispatcher when it receives an NDP Router Advertisement that updates the available configurations via DHCPv6. The Stack makes sure that its NDPDispatcher isn't informed unless the avaiable configurations via DHCPv6 for a NIC is updated. Tests: Test that a Stack's NDPDispatcher is informed when it receives an NDP Router Advertisement that informs it of new configurations available via DHCPv6. PiperOrigin-RevId: 289001283
2020-01-09Separate NDP tests into its own packageGhanan Gowripalan
Internal tools timeout after 60s during tests that are required to pass before changes can be submitted. Separate out NDP tests into its own package to help prevent timeouts when testing. PiperOrigin-RevId: 288990597
2020-01-09Change BindToDeviceOption to store NICIDEyal Soha
This makes it possible to call the sockopt from go even when the NIC has no name. PiperOrigin-RevId: 288955236
2020-01-09Allow clients to store an opaque NICContext with NICsBert Muthalaly
...retrievable later via stack.NICInfo(). Clients of this library can use it to add metadata that should be tracked alongside a NIC, to avoid having to keep a map[tcpip.NICID]metadata mirroring stack.Stack's nic map. PiperOrigin-RevId: 288924900
2020-01-08CancellableTimer to encapsulate the work of safely stopping timersGhanan Gowripalan
Add a new CancellableTimer type to encapsulate the work of safely stopping timers when it fires at the same time some "related work" is being handled. The term "related work" is some work that needs to be done while having obtained some common lock (L). Example: Say we have an invalidation timer that may be extended or cancelled by some event. Creating a normal timer and simply cancelling may not be sufficient as the timer may have already fired when the event handler attemps to cancel it. Even if the timer and event handler obtains L before doing work, once the event handler releases L, the timer will eventually obtain L and do some unwanted work. To prevent the timer from doing unwanted work, it checks if it should early return instead of doing the normal work after obtaining L. When stopping the timer callers must have L locked so the timer can be safely informed that it should early return. Test: Tests that CancellableTimer fires and resets properly. Test to make sure the timer fn is not called after being stopped within the lock L. PiperOrigin-RevId: 288806984
2020-01-08Getting a panic when running tests. For some reason the filter table isKevin Krakauer
ending up with the wrong chains and is indexing -1 into rules.
2020-01-08Introduce tcpip.SockOptBoolTamir Duberstein
...and port V6OnlyOption to it. PiperOrigin-RevId: 288789451
2020-01-08Combine various Create*NIC methods into CreateNICWithOptions.Bert Muthalaly
PiperOrigin-RevId: 288779416
2020-01-08Rename tcpip.SockOpt{,Int}Tamir Duberstein
PiperOrigin-RevId: 288772878
2020-01-08Remove redundant function argumentTamir Duberstein
PacketLooping is already a member on the passed Route. PiperOrigin-RevId: 288721500
2020-01-08Add NIC.isLoopback()Bert Muthalaly
...enabling us to remove the "CreateNamedLoopbackNIC" variant of CreateNIC and all the plumbing to connect it through to where the value is read in FindRoute. PiperOrigin-RevId: 288713093
2020-01-07Support deprecating SLAAC addresses after the preferred lifetimeGhanan Gowripalan
Support deprecating network endpoints on a NIC. If an endpoint is deprecated, it should not be used for new connections unless a more preferred endpoint is not available, or unless the deprecated endpoint was explicitly requested. Test: Test that deprecated endpoints are only returned when more preferred endpoints are not available and SLAAC addresses are deprecated after its preferred lifetime PiperOrigin-RevId: 288562705
2020-01-07Disable auto-generation of IPv6 link-local addresses for loopback NICsGhanan Gowripalan
Test: Test that an IPv6 link-local address is not auto-generated for loopback NICs, even when it is enabled for non-loopback NICS. PiperOrigin-RevId: 288519591
2020-01-06Pass the NIC-internal name to the NIC name function when generating opaque IIDsGhanan Gowripalan
Pass the NIC-internal name to the NIC name function when generating opaque IIDs so implementations can use the name that was provided when the NIC was created. Previously, explicit NICID to NIC name resolution was required from the netstack integrator. Tests: Test that the name provided when creating a NIC is passed to the NIC name function when generating opaque IIDs. PiperOrigin-RevId: 288395359
2020-01-03Use opaque interface identifiers when generating IPv6 addresses via SLAACGhanan Gowripalan
Support using opaque interface identifiers when generating IPv6 addresses via SLAAC when configured to do so. Note, this change does not handle retries in response to DAD conflicts yet. That will also come in a later change. Test: Test that when SLAAC addresses are generated, they use opaque interface identifiers when configured to do so. PiperOrigin-RevId: 288078605
2020-01-03Support generating opaque interface identifiers as defined by RFC 7217Ghanan Gowripalan
Support generating opaque interface identifiers as defined by RFC 7217 for auto-generated IPv6 link-local addresses. Opaque interface identifiers will also be used for IPv6 addresses auto-generated via SLAAC in a later change. Note, this change does not handle retries in response to DAD conflicts yet. That will also come in a later change. Tests: Test that when configured to generated opaque IIDs, they are properly generated as outlined by RFC 7217. PiperOrigin-RevId: 288035349
2019-12-26Automated rollback of changelist 287029703gVisor bot
PiperOrigin-RevId: 287217899
2019-12-24Enable IP_RECVTOS socket option for datagram socketsRyan Heacock
Added the ability to get/set the IP_RECVTOS socket option on UDP endpoints. If enabled, TOS from the incoming Network Header passed as ancillary data in the ControlMessages. Test: * Added unit test to udp_test.go that tests getting/setting as well as verifying that we receive expected TOS from incoming packet. * Added a syscall test PiperOrigin-RevId: 287029703
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 23:21:43 +0000