summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/stack
AgeCommit message (Collapse)Author
2020-07-27Merge release-20200622.1-240-g8dbf428a1 (automated)gVisor bot
2020-07-27Add ability to send unicast ARP requests and Neighbor SolicitationsSam Balana
The previous implementation of LinkAddressRequest only supported sending broadcast ARP requests and multicast Neighbor Solicitations. The ability to send these packets as unicast is required for Neighbor Unreachability Detection. Tests: pkg/tcpip/network/arp:arp_test - TestLinkAddressRequest pkg/tcpip/network/ipv6:ipv6_test - TestLinkAddressRequest Updates #1889 Updates #1894 Updates #1895 Updates #1947 Updates #1948 Updates #1949 Updates #1950 PiperOrigin-RevId: 323451569
2020-07-24Merge release-20200622.1-208-g82a5cada5 (automated)gVisor bot
2020-07-23Add AfterFunc to tcpip.ClockSam Balana
Changes the API of tcpip.Clock to also provide a method for scheduling and rescheduling work after a specified duration. This change also implements the AfterFunc method for existing implementations of tcpip.Clock. This is the groundwork required to mock time within tests. All references to CancellableTimer has been replaced with the tcpip.Job interface, allowing for custom implementations of scheduling work. This is a BREAKING CHANGE for clients that implement their own tcpip.Clock or use tcpip.CancellableTimer. Migration plan: 1. Add AfterFunc(d, f) to tcpip.Clock 2. Replace references of tcpip.CancellableTimer with tcpip.Job 3. Replace calls to tcpip.CancellableTimer#StopLocked with tcpip.Job#Cancel 4. Replace calls to tcpip.CancellableTimer#Reset with tcpip.Job#Schedule 5. Replace calls to tcpip.NewCancellableTimer with tcpip.NewJob. PiperOrigin-RevId: 322906897
2020-07-23Merge release-20200622.1-200-gdd530eeef (automated)gVisor bot
2020-07-23iptables: use keyed array literalsKevin Krakauer
PiperOrigin-RevId: 322882426
2020-07-23Merge release-20200622.1-198-gfc26b3764 (automated)gVisor bot
2020-07-23Merge pull request #3207 from kevinGC:icmp-connectgVisor bot
PiperOrigin-RevId: 322853192
2020-07-23Merge release-20200622.1-191-g36257e6b7 (automated)gVisor bot
2020-07-22make connect(2) fail when dest is unreachableKevin Krakauer
Previously, ICMP destination unreachable datagrams were ignored by TCP endpoints. This caused connect to hang when an intermediate router couldn't find a route to the host. This manifested as a Kokoro error when Docker IPv6 was enabled. The Ruby image test would try to install the sinatra gem and hang indefinitely attempting to use an IPv6 address. Fixes #3079.
2020-07-22iptables: don't NAT existing connectionsKevin Krakauer
Fixes a NAT bug that manifested as: - A SYN was sent from gVisor to another host, unaffected by iptables. - The corresponding SYN/ACK was NATted by a PREROUTING REDIRECT rule despite being part of the existing connection. - The socket that sent the SYN never received the SYN/ACK and thus a connection could not be established. We handle this (as Linux does) by tracking all connections, inserting a no-op conntrack rule for new connections with no rules of their own. Needed for istio support (#170).
2020-07-22Merge release-20200622.1-187-gbd98f8201 (automated)gVisor bot
2020-07-22iptables: replace maps with arraysKevin Krakauer
For iptables users, Check() is a hot path called for every packet one or more times. Let's avoid a bunch of map lookups. PiperOrigin-RevId: 322678699
2020-07-22Merge release-20200622.1-184-g71bf90c55 (automated)gVisor bot
2020-07-22Support for receiving outbound packets in AF_PACKET.Bhasker Hariharan
Updates #173 PiperOrigin-RevId: 322665518
2020-07-15Merge release-20200622.1-167-ge92f38ff0 (automated)gVisor bot
2020-07-15iptables: remove check for NetworkHeaderKevin Krakauer
This is no longer necessary, as we always set NetworkHeader before calling iptables.Check. PiperOrigin-RevId: 321461978
2020-07-15Merge release-20200622.1-162-gfef90c61c (automated)gVisor bot
2020-07-15Fix minor bugs in a couple of interface IOCTLs.Bhasker Hariharan
gVisor incorrectly returns the wrong ARP type for SIOGIFHWADDR. This breaks tcpdump as it tries to interpret the packets incorrectly. Similarly, SIOCETHTOOL is used by tcpdump to query interface properties which fails with an EINVAL since we don't implement it. For now change it to return EOPNOTSUPP to indicate that we don't support the query rather than return EINVAL. NOTE: ARPHRD types for link endpoints are distinct from NIC capabilities and NIC flags. In Linux all 3 exist eg. ARPHRD types are stored in dev->type field while NIC capabilities are more like the device features which can be queried using SIOCETHTOOL but not modified and NIC Flags are fields that can be modified from user space. eg. NIC status (UP/DOWN/MULTICAST/BROADCAST) etc. Updates #2746 PiperOrigin-RevId: 321436525
2020-07-13Merge pull request #2672 from amscanne:shim-integratedgVisor bot
PiperOrigin-RevId: 321053634
2020-07-13Merge release-20200622.1-97-g43c209f48 (automated)gVisor bot
2020-07-13garbage collect connectionsKevin Krakauer
As in Linux, we must periodically clean up unused connections. PiperOrigin-RevId: 321003353
2020-07-13Merge release-20200622.1-92-g9c32fd3f4 (automated)gVisor bot
2020-07-12Do not copy sleep.WakerGhanan Gowripalan
sleep.Waker's fields are modified as values. PiperOrigin-RevId: 320873451
2020-07-07Merge release-20200622.1-75-g7e4d2d63e (automated)gVisor bot
2020-07-07icmp: When setting TransportHeader, remove from the Data portion.Ting-Yu Wang
The current convention is when a header is set to pkt.XxxHeader field, it gets removed from pkt.Data. ICMP does not currently follow this convention. PiperOrigin-RevId: 320078606
2020-07-06Shard some slow tests.Ting-Yu Wang
stack_x_test: 2m -> 20s tcp_x_test: 80s -> 25s PiperOrigin-RevId: 319828101
2020-06-26Merge release-20200622.1-23-g7fb6cc286 (automated)gVisor bot
2020-06-25conntrack refactor, no behavior changesKevin Krakauer
- Split connTrackForPacket into 2 functions instead of switching on flag - Replace hash with struct keys. - Remove prefixes where possible - Remove unused connStatus, timeout - Flatten ConnTrack struct a bit - some intermediate structs had no meaning outside of the context of their parent. - Protect conn.tcb with a mutex - Remove redundant error checking (e.g. when is pkt.NetworkHeader valid) - Clarify that HandlePacket and CreateConnFor are the expected entrypoints for ConnTrack PiperOrigin-RevId: 318407168
2020-06-24Merge release-20200608.0-120-gb070e218c (automated)gVisor bot
2020-06-24Add support for Stack level options.Bhasker Hariharan
Linux controls socket send/receive buffers using a few sysctl variables - net.core.rmem_default - net.core.rmem_max - net.core.wmem_max - net.core.wmem_default - net.ipv4.tcp_rmem - net.ipv4.tcp_wmem The first 4 control the default socket buffer sizes for all sockets raw/packet/tcp/udp and also the maximum permitted socket buffer that can be specified in setsockopt(SOL_SOCKET, SO_(RCV|SND)BUF,...). The last two control the TCP auto-tuning limits and override the default specified in rmem_default/wmem_default as well as the max limits. Netstack today only implements tcp_rmem/tcp_wmem and incorrectly uses it to limit the maximum size in setsockopt() as well as uses it for raw/udp sockets. This changelist introduces the other 4 and updates the udp/raw sockets to use the newly introduced variables. The values for min/max match the current tcp_rmem/wmem values and the default value buffers for UDP/RAW sockets is updated to match the linux value of 212KiB up from the really low current value of 32 KiB. Updates #3043 Fixes #3043 PiperOrigin-RevId: 318089805
2020-06-24Merge release-20200608.0-119-g364ac92ba (automated)gVisor bot
2020-06-24Merge release-20200608.0-116-g2141013dc (automated)gVisor bot
2020-06-23Add support for SO_REUSEADDR to TCP sockets/endpoints.Ian Gudger
For TCP sockets, SO_REUSEADDR relaxes the rules for binding addresses. gVisor/netstack already supported a behavior similar to SO_REUSEADDR, but did not allow disabling it. This change brings the SO_REUSEADDR behavior closer to the behavior implemented by Linux and adds a new SO_REUSEADDR disabled behavior. Like Linux, SO_REUSEADDR is now disabled by default. PiperOrigin-RevId: 317984380
2020-06-19Merge release-20200608.0-88-g0c169b6ad (automated)gVisor bot
2020-06-18iptables: skip iptables if no rules are setKevin Krakauer
Users that never set iptables rules shouldn't incur the iptables performance cost. Suggested by Ian (@iangudger). PiperOrigin-RevId: 317232921
2020-06-19Merge release-20200608.0-87-g28b8a5cc3 (automated)gVisor bot
2020-06-18iptables: remove metadata structKevin Krakauer
Metadata was useful for debugging and safety, but enough tests exist that we should see failures when (de)serialization is broken. It made stack initialization more cumbersome and it's also getting in the way of ip6tables. PiperOrigin-RevId: 317210653
2020-06-18Merge release-20200608.0-81-g09b2fca40 (automated)gVisor bot
2020-06-18Cleanup tcp.timer and tcpip.RouteGhanan Gowripalan
When a tcp.timer or tcpip.Route is no longer used, clean up its resources so that unused memory may be released. PiperOrigin-RevId: 317046582
2020-06-17Increase timeouts for NDP testsGhanan Gowripalan
... to help reduce flakes. When waiting for an event to occur, use a timeout of 10s. When waiting for an event to not occur, use a timeout of 1s. Test: Ran test locally w/ run count of 1000 with and without gotsan. PiperOrigin-RevId: 316998128
2020-06-11Merge release-20200522.0-142-g4c0a8bdaf (automated)gVisor bot
2020-06-11Do not use tentative addresses for routesGhanan Gowripalan
Tentative addresses should not be used when finding a route. This change fixes a bug where a tentative address may have been used. Test: stack_test.TestDADResolve PiperOrigin-RevId: 315997624
2020-06-11Merge release-20200522.0-129-ga085e562d (automated)gVisor bot
2020-06-10Add support for SO_REUSEADDR to UDP sockets/endpoints.Ian Gudger
On UDP sockets, SO_REUSEADDR allows multiple sockets to bind to the same address, but only delivers packets to the most recently bound socket. This differs from the behavior of SO_REUSEADDR on TCP sockets. SO_REUSEADDR for TCP sockets will likely need an almost completely independent implementation. SO_REUSEADDR has some odd interactions with the similar SO_REUSEPORT. These interactions are tested fairly extensively and all but one particularly odd one (that honestly seems like a bug) behave the same on gVisor and Linux. PiperOrigin-RevId: 315844832
2020-06-09Merge release-20200522.0-102-g2d3b9d18e (automated)gVisor bot
2020-06-09Handle removed NIC in NDP timer for packet txGhanan Gowripalan
NDP packets are sent periodically from NDP timers. These timers do not hold the NIC lock when sending packets as the packet write operation may take some time. While the lock is not held, the NIC may be removed by some other goroutine. This change handles that scenario gracefully. Test: stack_test.TestRemoveNICWhileHandlingRSTimer PiperOrigin-RevId: 315524143
2020-06-07Merge release-20200522.0-94-g32b823fc (automated)gVisor bot
2020-06-07netstack: parse incoming packet headers up-frontKevin Krakauer
Netstack has traditionally parsed headers on-demand as a packet moves up the stack. This is conceptually simple and convenient, but incompatible with iptables, where headers can be inspected and mangled before even a routing decision is made. This changes header parsing to happen early in the incoming packet path, as soon as the NIC gets the packet from a link endpoint. Even if an invalid packet is found (e.g. a TCP header of insufficient length), the packet is passed up the stack for proper stats bookkeeping. PiperOrigin-RevId: 315179302
2020-06-06Merge release-20200522.0-91-g427d2082 (automated)gVisor bot
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 09:57:15 +0000