summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/stack
AgeCommit message (Collapse)Author
2021-01-21Merge release-20210112.0-59-g0ca4cf769 (automated)gVisor bot
2021-01-21Populate EgressRoute, GSO, Netproto in NICGhanan Gowripalan
fdbased and qdisc layers expect these fields to already be populated before being reached. PiperOrigin-RevId: 353099492
2021-01-20Merge release-20210112.0-47-g7ff5ceaea (automated)gVisor bot
2021-01-19Do not have a stack-wide linkAddressCacheGhanan Gowripalan
Link addresses are cached on a per NIC basis so instead of having a single cache that includes the NIC ID for neighbor entry lookups, use a single cache per NIC. PiperOrigin-RevId: 352684111
2021-01-19Merge release-20210112.0-45-gbe17b9444 (automated)gVisor bot
2021-01-19Per NIC NetworkEndpoint statisticsArthur Sfez
To facilitate the debugging of multi-homed setup, track Network protocols statistics for each endpoint. Note that the original stack-wide stats still exist. A new type of statistic counter is introduced, which track two versions of a stat at the same time. This lets a network endpoint increment both the local stat and the stack-wide stat at the same time. Fixes #4605 PiperOrigin-RevId: 352663276
2021-01-19Merge release-20210112.0-43-ga2ec1932c (automated)gVisor bot
2021-01-19Drop CheckLocalAddress from LinkAddressCacheGhanan Gowripalan
PiperOrigin-RevId: 352623277
2021-01-18Merge release-20210112.0-41-gf5736fa2b (automated)gVisor bot
2021-01-17Do not use a stack-wide queue of pending packetsGhanan Gowripalan
Packets may be pending on link resolution to complete before being sent. Link resolution is performed for neighbors which are unique to a NIC so hold link resolution related state under the NIC, not the stack. Note, this change may result in more queued packets but that is okay as RFC 4861 section 7.2.2 recommends that the stack maintain a queue of packets for each neighbor that is waiting for link resolution to complete, not a fixed limit per stack. PiperOrigin-RevId: 352322155
2021-01-16Merge release-20210112.0-40-gcd75bb163 (automated)gVisor bot
2021-01-15Resolve known link address on route creationGhanan Gowripalan
If a Route is being created through a link that requires link address resolution and a remote address that has a known mapping to a link address, populate the link address when the route is created. This removes the need for neighbor/link address caches to perform this check. Fixes #5149 PiperOrigin-RevId: 352122401
2021-01-16Merge release-20210112.0-39-g2814a032b (automated)gVisor bot
2021-01-15Support GetLinkAddress with neighborCacheGhanan Gowripalan
Test: integration_test.TestGetLinkAddress PiperOrigin-RevId: 352119404
2021-01-16Merge release-20210112.0-38-gfd5b52c87 (automated)gVisor bot
2021-01-15Only pass stack.Route's fields to LinkEndpointsGhanan Gowripalan
stack.Route is used to send network packets and resolve link addresses. A LinkEndpoint does not need to do either of these and only needs the route's fields at the time of the packet write request. Since LinkEndpoints only need the route's fields when writing packets, pass a stack.RouteInfo instead. PiperOrigin-RevId: 352108405
2021-01-15Remove count argument from tcpip.Endpoint.ReadTamir Duberstein
The same intent can be specified via the io.Writer. PiperOrigin-RevId: 352098747
2021-01-14Merge release-20201216.0-106-gc49ce8ca8 (automated)gVisor bot
2021-01-13Clear neighbor table on NIC downGhanan Gowripalan
Note, this includes static entries to match linux's behaviour. ``` $ ip neigh show dev eth0 192.168.42.1 lladdr fc:ec:da:70:6e:f9 STALE $ sudo ip neigh add 192.168.42.172 lladdr 22:33:44:55:66:77 dev eth0 $ ip neigh show dev eth0 192.168.42.1 lladdr fc:ec:da:70:6e:f9 STALE 192.168.42.172 lladdr 22:33:44:55:66:77 PERMANENT $ sudo ifconfig eth0 down $ ip neigh show dev eth0 $ sudo ifconfig eth0 up $ ip neigh show dev eth0 ``` Test: stack_test.TestClearNeighborCacheOnNICDisable PiperOrigin-RevId: 351696306
2021-01-14Merge release-20201216.0-105-g25b5ec713 (automated)gVisor bot
2021-01-13Do not resolve remote link address at transport layerGhanan Gowripalan
Link address resolution is performed at the link layer (if required) so we can defer it from the transport layer. When link resolution is required, packets will be queued and sent once link resolution completes. If link resolution fails, the transport layer will receive a control message indicating that the stack failed to route the packet. tcpip.Endpoint.Write no longer returns a channel now that writes do not wait for link resolution at the transport layer. tcpip.ErrNoLinkAddress is no longer used so it is removed. Removed calls to stack.Route.ResolveWith from the transport layer so that link resolution is performed when a route is created in response to an incoming packet (e.g. to complete TCP handshakes or send a RST). Tests: - integration_test.TestForwarding - integration_test.TestTCPLinkResolutionFailure Fixes #4458 RELNOTES: n/a PiperOrigin-RevId: 351684158
2021-01-13Merge release-20201216.0-94-ge74aa25e2 (automated)gVisor bot
2021-01-12Drop TransportEndpointID from HandleControlPacketGhanan Gowripalan
When a control packet is delivered, it is delivered to a transport endpoint with a matching stack.TransportEndpointID so there is no need to pass the ID to the endpoint as it already knows its ID. PiperOrigin-RevId: 351497588
2021-01-12Merge release-20201216.0-87-g4e03e8754 (automated)gVisor bot
2021-01-12Fix simple mistakes identified by goreportcard.Adin Scannell
These are primarily simplification and lint mistakes. However, minor fixes are also included and tests added where appropriate. PiperOrigin-RevId: 351425971
2021-01-11Merge release-20201216.0-82-g4c4de6644 (automated)gVisor bot
2021-01-07netstack: Refactor tcpip.Endpoint.ReadTing-Yu Wang
Read now takes a destination io.Writer, count, options. Keeping the method name Read, in contrast to the Write method. This enables: * direct transfer of views under VV * zero copy It also eliminates the need for sentry to keep a slice of view because userspace had requested a read that is smaller than the view returned, removing the complexity there. Read/Peek/ReadPacket are now consolidated together and some duplicate code is removed. PiperOrigin-RevId: 350636322
2020-12-28Merge release-20201208.0-89-g3ff7324df (automated)gVisor bot
2020-12-22Move SO_BINDTODEVICE to socketops.Nayana Bidari
PiperOrigin-RevId: 348696094
2020-12-22Invoke address resolution upon subsequent traffic to Failed neighborPeter Johnston
Removes the period of time in which subseqeuent traffic to a Failed neighbor immediately fails with ErrNoLinkAddress. A Failed neighbor is one in which address resolution fails; or in other words, the neighbor's IP address cannot be translated to a MAC address. This means removing the Failed state for linkAddrCache and allowing transitiong out of Failed into Incomplete for neighborCache. Previously, both caches would transition entries to Failed after address resolution fails. In this state, any subsequent traffic requested within an unreachable time would immediately fail with ErrNoLinkAddress. This does not follow RFC 4861 section 7.3.3: If address resolution fails, the entry SHOULD be deleted, so that subsequent traffic to that neighbor invokes the next-hop determination procedure again. Invoking next-hop determination at this point ensures that alternate default routers are tried. The API for getting a link address for a given address, whether through the link address cache or the neighbor table, is updated to optionally take a callback which will be called when address resolution completes. This allows `Route` to handle completing link resolution internally, so callers of (*Route).Resolve (e.g. endpoints) don’t have to keep track of when it completes and update the Route accordingly. This change also removes the wakers from LinkAddressCache, NeighborCache, and Route in favor of the callbacks, and callers that previously used a waker can now just pass a callback to (*Route).Resolve that will notify the waker on resolution completion. Fixes #4796 Startblock: has LGTM from sbalana and then add reviewer ghanan PiperOrigin-RevId: 348597478
2020-12-21Prefer matching labels and longest matching prefixGhanan Gowripalan
...when performing source address selection for IPv6. These are defined in RFC 6724 section 5 rule 6 (prefer matching label) and rule 8 (use longest matching prefix). This change also considers ULA of global scope instead of its own scope, as per RFC 6724 section 3.1: Also, note that ULAs are considered as global, not site-local, scope but are handled via the prefix policy table as discussed in Section 10.6. Test: stack_test.TestIPv6SourceAddressSelectionScope Startblock: has LGTM from peterjohnston and then add reviewer brunodalbo PiperOrigin-RevId: 348580996
2020-12-17Remove duplicate `return`Tamir Duberstein
PiperOrigin-RevId: 347974624
2020-12-16Add support to count the number of packets SACKed.Nayana Bidari
sacked_out is required in RACK to check the number of duplicate acknowledgements during updating the reorder window. If there is no reordering and the value for sacked_out is greater than the classic threshold value 3, then reorder window is set to zero. It is calculated by counting the number of segments sacked in the ACK and is reduced when a cumulative ACK is received which covers the SACK blocks. This value is set to zero when the connection enters recovery. PiperOrigin-RevId: 347872246
2020-12-15Merge release-20201208.0-46-g25ebddbdd (automated)gVisor bot
2020-12-15Fix a data race in packetEPsTing-Yu Wang
packetEPs may get into a state that `len < cap`, casuing append() modifying the original slice storage. Reported-by: syzbot+978dd0e9c2600ab7a76b@syzkaller.appspotmail.com PiperOrigin-RevId: 347634351
2020-12-12Introduce IPv6 extension header serialization facilitiesBruno Dal Bo
Adds IPv6 extension header serializer and Hop by Hop options serializer. Add RouterAlert option serializer and use it in MLD. Fixed #4996 Startblock: has LGTM from marinaciocea and then add reviewer ghanan PiperOrigin-RevId: 347174537
2020-12-11[netstack] Decouple tcpip.ControlMessages from the IP control messges.Ayush Ranjan
tcpip.ControlMessages can not contain Linux specific structures which makes it painful to convert back and forth from Linux to tcpip back to Linux when passing around control messages in hostinet and raw sockets. Now we convert to the Linux version of the control message as soon as we are out of tcpip. PiperOrigin-RevId: 347027065
2020-12-10Merge release-20201130.0-80-g53a95ad0d (automated)gVisor bot
2020-12-10Use specified source address for IGMP/MLD packetsGhanan Gowripalan
This change also considers interfaces and network endpoints enabled up up to the point all work to disable them are complete. This was needed so that protocols can perform shutdown work while being disabled (e.g. sending a packet which requires the endpoint to be enabled to obtain a source address). Bug #4682, #4861 Fixes #4888 Startblock: has LGTM from peterjohnston and then add reviewer brunodalbo PiperOrigin-RevId: 346869702
2020-12-05Merge release-20201130.0-46-gdf2dbe3e3 (automated)gVisor bot
2020-12-04Remove stack.ReadOnlyAddressableEndpointStateGhanan Gowripalan
Startblock: has LGTM from asfez and then add reviewer tamird PiperOrigin-RevId: 345815146
2020-12-04Merge release-20201130.0-39-gfd28ccfaa (automated)gVisor bot
2020-12-04Introduce IPv4 options serializer and add RouterAlert to IGMPBruno Dal Bo
PiperOrigin-RevId: 345701623
2020-12-03Merge release-20201130.0-31-g3ff1aef54 (automated)gVisor bot
2020-12-03Make `stack.Route` thread safePeter Johnston
Currently we rely on the user to take the lock on the endpoint that owns the route, in order to modify it safely. We can instead move `Route.RemoteLinkAddress` under `Route`'s mutex, and allow non-locking and thread-safe access to other fields of `Route`. PiperOrigin-RevId: 345461586
2020-12-03Support partitions for other tests.Adin Scannell
PiperOrigin-RevId: 345399936
2020-12-02Extract ICMPv4/v6 specific stats to their own typesArthur Sfez
This change lets us split the v4 stats from the v6 stats, which will be useful when adding stats for each network endpoint. PiperOrigin-RevId: 345322615
2020-12-01Deflake stack_test.TestRouterSolicitationGhanan Gowripalan
...by using the fake clock. TestRouterSolicitation no longer runs its sub-tests in parallel now that the sub-tests are not long-running - the fake clock simulates time moving forward. PiperOrigin-RevId: 345165794
2020-12-02Merge release-20201117.0-88-g0c4973942 (automated)gVisor bot
2020-12-01Correctly lock when listing neighbor entriesGhanan Gowripalan
PiperOrigin-RevId: 345162450
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 10:50:20 +0000