Age | Commit message (Collapse) | Author |
|
This is a precursor to be being able to build an intrusive list
of PacketBuffers for use in queuing disciplines being implemented.
Updates #2214
PiperOrigin-RevId: 302677662
|
|
Previously, SLAAC related state was stored on a per-address basis. This was
sufficient for the simple case of a single SLAAC address per prefix, but
future CLs will introduce temporary addresses which will result in multiple
SLAAC addresses for a prefix. This refactor allows storing multiple addresses
for a prefix in a single SLAAC prefix state.
No behaviour changes - existing tests continue to pass.
PiperOrigin-RevId: 300832812
|
|
When a NIC is removed, attempt to disable the NIC first to cleanup
dynamic state and stop ongoing periodic tasks (e.g. IPv6 router
solicitations, DAD) so that a removed NIC does not attempt to send
packets.
Tests:
- stack_test.TestRemoveUnknownNIC
- stack_test.TestRemoveNIC
- stack_test.TestDADStop
- stack_test.TestCleanupNDPState
- stack_test.TestRouteWithDownNIC
- stack_test.TestStopStartSolicitingRouters
PiperOrigin-RevId: 300805857
|
|
- Don't allocate []*endpointsByNic in transportDemuxer.deliverPacket() unless
actually needed for UDP broadcast/multicast.
- Don't allocate []*endpointsByNic via transportDemuxer.findEndpointLocked()
=> transportDemuxer.findAllEndpointsLocked().
- Skip unnecessary map lookups in transportDemuxer.findEndpointLocked() =>
transportDemuxer.findAllEndpointsLocked() (now iterEndpointsLocked).
For most deliverable packets other than UDP broadcast/multicast packets, this
saves two slice allocations and three map lookups per packet.
PiperOrigin-RevId: 300804135
|
|
LinkEndpoints may expect/assume that the a tcpip.PacketBuffer's Header
has enough capacity for its own headers, as per documentation for
LinkEndpoint.MaxHeaderLength.
Test: stack_test.TestNICForwarding
PiperOrigin-RevId: 300784192
|
|
...instead of sorting at various times. Plug a memory leak by setting
removed elements to nil.
PiperOrigin-RevId: 300471087
|
|
PiperOrigin-RevId: 300362789
|
|
PiperOrigin-RevId: 300308974
|
|
This change also updates where the IP packet buffer is held in an
outbound tcpip.PacketBuffer from Header to Data. This change removes
unncessary copying of the IP packet buffer when forwarding.
Test: stack_test.TestNICForwarding
PiperOrigin-RevId: 300217972
|
|
Fixes #1510
Test:
- stack_test.TestForwardingWithStaticResolver
- stack_test.TestForwardingWithFakeResolver
- stack_test.TestForwardingWithNoResolver
- stack_test.TestForwardingWithFakeResolverPartialTimeout
- stack_test.TestForwardingWithFakeResolverTwoPackets
- stack_test.TestForwardingWithFakeResolverManyPackets
- stack_test.TestForwardingWithFakeResolverManyResolutions
PiperOrigin-RevId: 300182570
|
|
If the NIC has a valid IPv6 address assigned, use it as the
source address for outgoing NDP Router Solicitation packets.
Test: stack_test.TestRouterSolicitation
PiperOrigin-RevId: 299398763
|
|
Useful for logs to print the string representation of the value
instead of the integer value.
PiperOrigin-RevId: 299356847
|
|
Ensures that all access to TransportEndpointInfo.ID is either:
* In a function ending in a Locked suffix.
* While holding the appropriate mutex.
This primary affects the checkV4Mapped method on affected endpoints, which has
been renamed to checkV4MappedLocked. Also document the method and change its
argument to be a value instead of a pointer which had caused some awkwardness.
This race was possible in the udp and icmp endpoints between Connect and uses
of TransportEndpointInfo.ID including in both itself and Bind.
The tcp endpoint did not suffer from this bug, but benefited from better
documentation.
Updates #357
PiperOrigin-RevId: 298682913
|
|
A deadlock may occur if a write lock on a RWMutex is blocked between
nested read lock attempts as the inner read lock attempt will be
blocked in this scenario.
Example (T1 and T2 are differnt goroutines):
T1: obtain read-lock
T2: attempt write-lock (blocks)
T1: attempt inner/nested read-lock (blocks)
Here we can see that T1 and T2 are deadlocked.
Tests: Existing tests pass.
PiperOrigin-RevId: 298426678
|
|
|
|
Tests:
- header_test.TestIsV6LinkLocalMulticastAddress
- header_test.TestScopeForIPv6Address
- stack_test.TestIPv6SourceAddressSelectionScopeAndSameAddress
PiperOrigin-RevId: 297215576
|
|
- commit the changes for the comments.
|
|
Protocol dispatchers were previously leaked. Bypassing TIME_WAIT is required to
test this change.
Also fix a race when a socket in SYN-RCVD is closed. This is also required to
test this change.
PiperOrigin-RevId: 296922548
|
|
PiperOrigin-RevId: 296526279
|
|
Tests: stack_test.TestAttachToLinkEndpointImmediately
PiperOrigin-RevId: 296474068
|
|
Test: stack_test.TestRouterSolicitation
PiperOrigin-RevId: 296454766
|
|
- Disabled NICs will have their associated NDP state cleared.
- Disabled NICs will not accept incoming packets.
- Writes through a Route with a disabled NIC will return an invalid
endpoint state error.
- stack.Stack.FindRoute will not return a route with a disabled NIC.
- NIC's Running flag will report the NIC's enabled status.
Tests:
- stack_test.TestDisableUnknownNIC
- stack_test.TestDisabledNICsNICInfoAndCheckNIC
- stack_test.TestRoutesWithDisabledNIC
- stack_test.TestRouteWritePacketWithDisabledNIC
- stack_test.TestStopStartSolicitingRouters
- stack_test.TestCleanupNDPState
- stack_test.TestAddRemoveIPv4BroadcastAddressOnNICEnableDisable
- stack_test.TestJoinLeaveAllNodesMulticastOnNICEnableDisable
PiperOrigin-RevId: 296298588
|
|
|
|
Add nat table support for Prerouting hook with Redirect option.
Add tests to check redirect of ports.
|
|
PiperOrigin-RevId: 294500858
|
|
Previously, a DAD event would not be sent if DAD was disabled.
This allows integrators to do some work when an IPv6 address is bound to
a NIC without special logic that checks if DAD is enabled.
Without this change, integrators would need to check if a NIC has DAD
enabled when an address is auto-generated. If DAD is enabled, it would
need to delay the work until the DAD completion event; otherwise, it
would need to do the work in the address auto-generated event handler.
Test: stack_test.TestDADDisabled
PiperOrigin-RevId: 293732914
|
|
Auto-generated link-local addresses should have the same lifecycle hooks
as global SLAAC addresses.
The Stack's NDP dispatcher should be notified when link-local addresses
are auto-generated and invalidated. They should also be removed when a
NIC is disabled (which will be supported in a later change).
Tests:
- stack_test.TestNICAutoGenAddrWithOpaque
- stack_test.TestNICAutoGenAddr
PiperOrigin-RevId: 293706760
|
|
Addresses may be added before a NIC is enabled. Make sure DAD is
performed on the permanent IPv6 addresses when they get enabled.
Test:
- stack_test.TestDoDADWhenNICEnabled
- stack.TestDisabledRxStatsWhenNICDisabled
PiperOrigin-RevId: 293697429
|
|
Get the link address for the target of an NDP Neighbor Advertisement
from the NDP Target Link Layer Address option.
Tests:
- ipv6.TestNeighorAdvertisementWithTargetLinkLayerOption
- ipv6.TestNeighorAdvertisementWithInvalidTargetLinkLayerOption
PiperOrigin-RevId: 293632609
|
|
PiperOrigin-RevId: 293271055
|
|
As per RFC 2464 section 7, an IPv6 packet with a multicast destination
address is transmitted to the mapped Ethernet multicast address.
Test:
- ipv6.TestLinkResolution
- stack_test.TestDADResolve
- stack_test.TestRouterSolicitation
PiperOrigin-RevId: 292610529
|
|
When sending NDP messages with an unspecified source address, the Source
Link Layer address must not be included.
Test: stack_test.TestDADResolve
PiperOrigin-RevId: 292341334
|
|
Do not start a new goroutine when calling
stack.NDPDispatcher.OnDuplicateAddressDetectionStatus.
PiperOrigin-RevId: 292268574
|
|
Test: stack_test.TestDADResolve
PiperOrigin-RevId: 292003124
|
|
This is to aid later implementation for /dev/net/tun device.
PiperOrigin-RevId: 291746025
|
|
PiperOrigin-RevId: 291745021
|
|
PiperOrigin-RevId: 291426657
|
|
Increase the timeout to 1s when waiting for async NDP events to help
reduce flakiness. This will not significantly increase test times as the
async events continue to receive an event on a channel. The increased
timeout allows more time for an event to be sent on the channel as the
previous timeout of 100ms caused some flakes.
Test: Existing tests pass
PiperOrigin-RevId: 291420936
|
|
- Wrap NIC's fields that should only be accessed while holding the mutex in
an anonymous struct with the embedded mutex.
- Make sure NIC's spoofing and promiscuous mode flags are only read while
holding the NIC's mutex.
- Use the correct endpoint when sending DAD messages.
- Do not hold the NIC's lock when sending DAD messages.
This change does not introduce any behaviour changes.
Tests: Existing tests continue to pass.
PiperOrigin-RevId: 291036251
|
|
PiperOrigin-RevId: 290793754
|
|
CERT Advisory CA-96.21 III. Solution advises that devices drop packets which
could not have correctly arrived on the wire, such as receiving a packet where
the source IP address is owned by the device that sent it.
Fixes #1507
PiperOrigin-RevId: 290378240
|
|
It was possible to use this function incorrectly, and its separation
wasn't buying us anything.
PiperOrigin-RevId: 290311100
|
|
If a previously added IPv6 address (statically or via SLAAC) was removed, it
would be left in an expired state waiting to be cleaned up if any references to
it were still held. During this time, the same address could be regenerated via
SLAAC, which should be allowed. This change supports this scenario.
When upgrading an endpoint from temporary or permanentExpired to permanent,
respect the new configuration type (static or SLAAC) and deprecated status,
along with the new PrimaryEndpointBehavior (which was already supported).
Test: stack.TestAutoGenAddrAfterRemoval
PiperOrigin-RevId: 289990168
|
|
This change adds support to send NDP Router Solicitation messages when a NIC
becomes enabled as a host, as per RFC 4861 section 6.3.7.
Note, Router Solicitations will only be sent when the stack has forwarding
disabled.
Tests: Unittests to make sure that the initial Router Solicitations are sent
as configured. The tests also validate the sent Router Solicitations' fields.
PiperOrigin-RevId: 289964095
|
|
All inbound segments for connections in ESTABLISHED state are delivered to the
endpoint's queue but for every segment delivered we also queue the endpoint for
processing to a selected processor. This ensures that when there are a large
number of connections in ESTABLISHED state the inbound packets are all handled
by a small number of goroutines and significantly reduces the amount of work the
goscheduler has to perform.
We let connections in other states follow the current path where the
endpoint's goroutine directly handles the segments.
Updates #231
PiperOrigin-RevId: 289728325
|
|
PiperOrigin-RevId: 289718534
|
|
Do Source Address Selection when choosing an IPv6 source address as per RFC 6724
section 5 rules 1-3:
1) Prefer same address
2) Prefer appropriate scope
3) Avoid deprecated addresses.
A later change will update Source Address Selection to follow rules 4-8.
Tests:
Rule 1 & 2: stack.TestIPv6SourceAddressSelectionScopeAndSameAddress,
Rule 3: stack.TestAutoGenAddrTimerDeprecation,
stack.TestAutoGenAddrDeprecateFromPI
PiperOrigin-RevId: 289559373
|
|
|
|
Fixes #1490
Fixes #1495
PiperOrigin-RevId: 289523250
|
|
|