summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/stack
AgeCommit message (Collapse)Author
2020-09-09Increase resolution timeout for TestCacheResolutionSam Balana
Fixes pkg/tcpip/stack:stack_test flake experienced while running TestCacheResolution with gotsan. This occurs when the test-runner takes longer than the resolution timeout to call linkAddrCache.get. In this test we don't care about the resolution timeout, so set it to the maximum and rely on test-runner timeouts to avoid deadlocks. PiperOrigin-RevId: 330566250
2020-09-09Improve type safety for transport protocol optionsGhanan Gowripalan
The existing implementation for TransportProtocol.{Set}Option take arguments of an empty interface type which all types (implicitly) implement; any type may be passed to the functions. This change introduces marker interfaces for transport protocol options that may be set or queried which transport protocol option types implement to ensure that invalid types are caught at compile time. Different interfaces are used to allow the compiler to enforce read-only or set-only socket options. RELNOTES: n/a PiperOrigin-RevId: 330559811
2020-09-09Use fine-grained mutex for stack.cleanupEndpoints.Bhasker Hariharan
stack.cleanupEndpoints is protected by the stack.mu but that can cause contention as the stack mutex is already acquired in a lot of hot paths during new endpoint creation /cleanup etc. Moving this to a fine grained mutex should reduce contention on the stack.mu. PiperOrigin-RevId: 330026151
2020-09-09Use atomic.Value for Stack.tcpProbeFunc.Jamie Liu
b/166980357#comment56 shows: - 837 goroutines blocked in: gvisor/pkg/sync/sync.(*RWMutex).Lock gvisor/pkg/tcpip/stack/stack.(*Stack).StartTransportEndpointCleanup gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).cleanupLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).completeWorkerLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop.func1 gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop - 695 goroutines blocked in: gvisor/pkg/sync/sync.(*RWMutex).Lock gvisor/pkg/tcpip/stack/stack.(*Stack).CompleteTransportEndpointCleanup gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).cleanupLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).completeWorkerLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop.func1 gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop - 3882 goroutines blocked in: gvisor/pkg/sync/sync.(*RWMutex).Lock gvisor/pkg/tcpip/stack/stack.(*Stack).GetTCPProbe gvisor/pkg/tcpip/transport/tcp/tcp.newEndpoint gvisor/pkg/tcpip/transport/tcp/tcp.(*protocol).NewEndpoint gvisor/pkg/tcpip/stack/stack.(*Stack).NewEndpoint All of these are contending on Stack.mu. Stack.StartTransportEndpointCleanup() and Stack.CompleteTransportEndpointCleanup() insert/delete TransportEndpoints in a map (Stack.cleanupEndpoints), and the former also does endpoint unregistration while holding Stack.mu, so it's not immediately clear how feasible it is to replace the map with a mutex-less implementation or how much doing so would help. However, Stack.GetTCPProbe() just reads a function object (Stack.tcpProbeFunc) that is almost always nil (as far as I can tell, Stack.AddTCPProbe() is only called in tests), and it's called for every new TCP endpoint. So converting it to an atomic.Value should significantly reduce contention on Stack.mu, improving TCP endpoint creation latency and allowing TCP endpoint cleanup to proceed. PiperOrigin-RevId: 330004140
2020-09-09Fix Accept to not return error for sockets in accept queue.Bhasker Hariharan
Accept on gVisor will return an error if a socket in the accept queue was closed before Accept() was called. Linux will return the new fd even if the returned socket is already closed by the peer say due to a RST being sent by the peer. This seems to be intentional in linux more details on the github issue. Fixes #3780 PiperOrigin-RevId: 329828404
2020-09-09Don't bind loopback to all IPs in an IPv6 subnetGhanan Gowripalan
An earlier change considered the loopback bound to all addresses in an assigned subnet. This should have only be done for IPv4 to maintain compatability with Linux: ``` $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 2001:db8::1 PING 2001:db8::1(2001:db8::1) 56 data bytes ^C --- 2001:db8::1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3062ms $ ping 2001:db8::2 PING 2001:db8::2(2001:db8::2) 56 data bytes ^C --- 2001:db8::2 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2030ms $ sudo ip addr add 2001:db8::1/64 dev lo $ ping 2001:db8::1 PING 2001:db8::1(2001:db8::1) 56 data bytes 64 bytes from 2001:db8::1: icmp_seq=1 ttl=64 time=0.055 ms 64 bytes from 2001:db8::1: icmp_seq=2 ttl=64 time=0.074 ms 64 bytes from 2001:db8::1: icmp_seq=3 ttl=64 time=0.073 ms 64 bytes from 2001:db8::1: icmp_seq=4 ttl=64 time=0.071 ms ^C --- 2001:db8::1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3075ms rtt min/avg/max/mdev = 0.055/0.068/0.074/0.007 ms $ ping 2001:db8::2 PING 2001:db8::2(2001:db8::2) 56 data bytes From 2001:db8::1 icmp_seq=1 Destination unreachable: No route From 2001:db8::1 icmp_seq=2 Destination unreachable: No route From 2001:db8::1 icmp_seq=3 Destination unreachable: No route From 2001:db8::1 icmp_seq=4 Destination unreachable: No route ^C --- 2001:db8::2 ping statistics --- 4 packets transmitted, 0 received, +4 errors, 100% packet loss, time 3070ms ``` Test: integration_test.TestLoopbackAcceptAllInSubnet PiperOrigin-RevId: 329011566
2020-09-09Improve type safety for network protocol optionsGhanan Gowripalan
The existing implementation for NetworkProtocol.{Set}Option take arguments of an empty interface type which all types (implicitly) implement; any type may be passed to the functions. This change introduces marker interfaces for network protocol options that may be set or queried which network protocol option types implement to ensure that invalid types are caught at compile time. Different interfaces are used to allow the compiler to enforce read-only or set-only socket options. PiperOrigin-RevId: 328980359
2020-09-09fix panic when calling SO_ORIGINAL_DST without initializing iptablesKevin Krakauer
Reported-by: syzbot+074ec22c42305725b79f@syzkaller.appspotmail.com PiperOrigin-RevId: 328963899
2020-09-09Use a single NetworkEndpoint per addressGhanan Gowripalan
This change was already done as of https://github.com/google/gvisor/commit/1736b2208f but https://github.com/google/gvisor/commit/a174aa7597 conflicted with that change and it was missed in reviews. This change fixes the conflict. PiperOrigin-RevId: 328920372
2020-09-09Improve type safety for socket optionsGhanan Gowripalan
The existing implementation for {G,S}etSockOpt take arguments of an empty interface type which all types (implicitly) implement; any type may be passed to the functions. This change introduces marker interfaces for socket options that may be set or queried which socket option types implement to ensure that invalid types are caught at compile time. Different interfaces are used to allow the compiler to enforce read-only or set-only socket options. Fixes #3714. RELNOTES: n/a PiperOrigin-RevId: 328832161
2020-09-09Add function to get error from a tcpip.EndpointGhanan Gowripalan
In an upcoming CL, socket option types are made to implement a marker interface with pointer receivers. Since this results in calling methods of an interface with a pointer, we incur an allocation when attempting to get an Endpoint's last error with the current implementation. When calling the method of an interface, the compiler is unable to determine what the interface implementation does with the pointer (since calling a method on an interface uses virtual dispatch at runtime so the compiler does not know what the interface method will do) so it allocates on the heap to be safe incase an implementation continues to hold the pointer after the functioon returns (the reference escapes the scope of the object). In the example below, the compiler does not know what b.foo does with the reference to a it allocates a on the heap as the reference to a may escape the scope of a. ``` var a int var b someInterface b.foo(&a) ``` This change removes the opportunity for that allocation. RELNOTES: n/a PiperOrigin-RevId: 328796559
2020-09-09ip6tables: (de)serialize ip6tables structsKevin Krakauer
More implementation+testing to follow. #3549. PiperOrigin-RevId: 328770160
2020-09-09Add option to replace linkAddrCache with neighborCacheSam Balana
This change adds an option to replace the current implementation of ARP through linkAddrCache, with an implementation of NUD through neighborCache. Switching to using NUD for both ARP and NDP is beneficial for the reasons described by RFC 4861 Section 3.1: "[Using NUD] significantly improves the robustness of packet delivery in the presence of failing routers, partially failing or partitioned links, or nodes that change their link-layer addresses. For instance, mobile nodes can move off-link without losing any connectivity due to stale ARP caches." "Unlike ARP, Neighbor Unreachability Detection detects half-link failures and avoids sending traffic to neighbors with which two-way connectivity is absent." Along with these changes exposes the API for querying and operating the neighbor cache. Operations include: - Create a static entry - List all entries - Delete all entries - Remove an entry by address This also exposes the API to change the NUD protocol constants on a per-NIC basis to allow Neighbor Discovery to operate over links with widely varying performance characteristics. See [RFC 4861 Section 10][1] for the list of constants. Finally, an API for subscribing to NUD state changes is exposed through NUDDispatcher. See [RFC 4861 Appendix C][3] for the list of edges. Tests: pkg/tcpip/network/arp:arp_test + TestDirectRequest pkg/tcpip/network/ipv6:ipv6_test + TestLinkResolution + TestNDPValidation + TestNeighorAdvertisementWithTargetLinkLayerOption + TestNeighorSolicitationResponse + TestNeighorSolicitationWithSourceLinkLayerOption + TestRouterAdvertValidation pkg/tcpip/stack:stack_test + TestCacheWaker + TestForwardingWithFakeResolver + TestForwardingWithFakeResolverManyPackets + TestForwardingWithFakeResolverManyResolutions + TestForwardingWithFakeResolverPartialTimeout + TestForwardingWithFakeResolverTwoPackets + TestIPv6SourceAddressSelectionScopeAndSameAddress [1]: https://tools.ietf.org/html/rfc4861#section-10 [2]: https://tools.ietf.org/html/rfc4861#appendix-C Fixes #1889 Fixes #1894 Fixes #1895 Fixes #1947 Fixes #1948 Fixes #1949 Fixes #1950 PiperOrigin-RevId: 328365034
2020-09-09Consider loopback bound to all addresses in subnetGhanan Gowripalan
When a loopback interface is configurd with an address and associated subnet, the loopback should treat all addresses in that subnet as an address it owns. This is mimicking linux behaviour as seen below: ``` $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 192.0.2.1 PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data. ^C --- 192.0.2.1 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1018ms $ ping 192.0.2.2 PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data. ^C --- 192.0.2.2 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2039ms $ sudo ip addr add 192.0.2.1/24 dev lo $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet 192.0.2.1/24 scope global lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 192.0.2.1 PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data. 64 bytes from 192.0.2.1: icmp_seq=1 ttl=64 time=0.131 ms 64 bytes from 192.0.2.1: icmp_seq=2 ttl=64 time=0.046 ms 64 bytes from 192.0.2.1: icmp_seq=3 ttl=64 time=0.048 ms ^C --- 192.0.2.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2042ms rtt min/avg/max/mdev = 0.046/0.075/0.131/0.039 ms $ ping 192.0.2.2 PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data. 64 bytes from 192.0.2.2: icmp_seq=1 ttl=64 time=0.131 ms 64 bytes from 192.0.2.2: icmp_seq=2 ttl=64 time=0.069 ms 64 bytes from 192.0.2.2: icmp_seq=3 ttl=64 time=0.049 ms 64 bytes from 192.0.2.2: icmp_seq=4 ttl=64 time=0.035 ms ^C --- 192.0.2.2 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3049ms rtt min/avg/max/mdev = 0.035/0.071/0.131/0.036 ms ``` Test: integration_test.TestLoopbackAcceptAllInSubnet PiperOrigin-RevId: 328188546
2020-09-09Consistent precondition formattingMichael Pratt
Our "Preconditions:" blocks are very useful to determine the input invariants, but they are bit inconsistent throughout the codebase, which makes them harder to read (particularly cases with 5+ conditions in a single paragraph). I've reformatted all of the cases to fit in simple rules: 1. Cases with a single condition are placed on a single line. 2. Cases with multiple conditions are placed in a bulleted list. This format has been added to the style guide. I've also mentioned "Postconditions:", though those are much less frequently used, and all uses already match this style. PiperOrigin-RevId: 327687465
2020-08-19Remove address range functionsGhanan Gowripalan
Should have been removed in cl/326791119 https://github.com/google/gvisor/commit/9a7b5830aa063895f67ca0fdf653a46906374613 PiperOrigin-RevId: 327074156
2020-08-19Don't support address rangesGhanan Gowripalan
Previously the netstack supported assignment of a range of addresses. This feature is not used so remove it. PiperOrigin-RevId: 326791119
2020-08-19Use a single NetworkEndpoint per NIC per protocolGhanan Gowripalan
The NetworkEndpoint does not need to be created for each address. Most of the work the NetworkEndpoint does is address agnostic. PiperOrigin-RevId: 326759605
2020-08-13Migrate to PacketHeader API for PacketBuffer.Ting-Yu Wang
Formerly, when a packet is constructed or parsed, all headers are set by the client code. This almost always involved prepending to pk.Header buffer or trimming pk.Data portion. This is known to prone to bugs, due to the complexity and number of the invariants assumed across netstack to maintain. In the new PacketHeader API, client will call Push()/Consume() method to construct/parse an outgoing/incoming packet. All invariants, such as slicing and trimming, are maintained by the API itself. NewPacketBuffer() is introduced to create new PacketBuffer. Zero value is no longer valid. PacketBuffer now assumes the packet is a concatenation of following portions: * LinkHeader * NetworkHeader * TransportHeader * Data Any of them could be empty, or zero-length. PiperOrigin-RevId: 326507688
2020-08-10Set the NetworkProtocolNumber of all PacketBuffers.Kevin Krakauer
NetworkEndpoints set the number on outgoing packets in Write() and NetworkProtocols set them on incoming packets in Parse(). Needed for #3549. PiperOrigin-RevId: 325938745
2020-08-08Use unicast source for ICMP echo repliesGhanan Gowripalan
Packets MUST NOT use a non-unicast source address for ICMP Echo Replies. Test: integration_test.TestPingMulticastBroadcast PiperOrigin-RevId: 325634380
2020-08-07Fix panic during Address Resolution of neighbor entry created by NSSam Balana
When a Neighbor Solicitation is received, a neighbor entry is created with the remote host's link layer address, but without a link layer address resolver. If the host decides to send a packet addressed to the IP address of that neighbor entry, Address Resolution starts with a nil pointer to the link layer address resolver. This causes the netstack to panic and crash. This change ensures that when a packet is sent in that situation, the link layer address resolver will be set before Address Resolution begins. Tests: pkg/tcpip/stack:stack_test + TestEntryUnknownToStaleToProbeToReachable - TestNeighborCacheEntryNoLinkAddress Updates #1889 Updates #1894 Updates #1895 Updates #1947 Updates #1948 Updates #1949 Updates #1950 PiperOrigin-RevId: 325516471
2020-08-06Join IPv4 all-systems group on NIC enableGhanan Gowripalan
Test: - stack_test.TestJoinLeaveMulticastOnNICEnableDisable - integration_test.TestIncomingMulticastAndBroadcast PiperOrigin-RevId: 325185259
2020-08-05Support receiving broadcast IPv4 packetsGhanan Gowripalan
Test: integration_test.TestIncomingSubnetBroadcast PiperOrigin-RevId: 325135617
2020-08-05Prefer RLock over Lock in functions that don't need Lock().Bhasker Hariharan
Updates #231 PiperOrigin-RevId: 325097683
2020-08-04Update variables for implementation of RACK in TCPNayana Bidari
RACK (Recent Acknowledgement) is a new loss detection algorithm in TCP. These are the fields which should be stored on connections to implement RACK algorithm. PiperOrigin-RevId: 324948703
2020-07-31iptables: support SO_ORIGINAL_DSTKevin Krakauer
Envoy (#170) uses this to get the original destination of redirected packets.
2020-07-30Implement neighbor unreachability detection for ARP and NDP.Sam Balana
This change implements the Neighbor Unreachability Detection (NUD) state machine, as per RFC 4861 [1]. The state machine operates on a single neighbor in the local network. This requires the state machine to be implemented on each entry of the neighbor table. This change also adds, but does not expose, several APIs. The first API is for performing basic operations on the neighbor table: - Create a static entry - List all entries - Delete all entries - Remove an entry by address The second API is used for changing the NUD protocol constants on a per-NIC basis to allow Neighbor Discovery to operate over links with widely varying performance characteristics. See [RFC 4861 Section 10][2] for the list of constants. Finally, the last API is for allowing users to subscribe to NUD state changes. See [RFC 4861 Appendix C][3] for the list of edges. [1]: https://tools.ietf.org/html/rfc4861 [2]: https://tools.ietf.org/html/rfc4861#section-10 [3]: https://tools.ietf.org/html/rfc4861#appendix-C Tests: pkg/tcpip/stack:stack_test - TestNeighborCacheAddStaticEntryThenOverflow - TestNeighborCacheClear - TestNeighborCacheClearThenOverflow - TestNeighborCacheConcurrent - TestNeighborCacheDuplicateStaticEntryWithDifferentLinkAddress - TestNeighborCacheDuplicateStaticEntryWithSameLinkAddress - TestNeighborCacheEntry - TestNeighborCacheEntryNoLinkAddress - TestNeighborCacheGetConfig - TestNeighborCacheKeepFrequentlyUsed - TestNeighborCacheNotifiesWaker - TestNeighborCacheOverflow - TestNeighborCacheOverwriteWithStaticEntryThenOverflow - TestNeighborCacheRemoveEntry - TestNeighborCacheRemoveEntryThenOverflow - TestNeighborCacheRemoveStaticEntry - TestNeighborCacheRemoveStaticEntryThenOverflow - TestNeighborCacheRemoveWaker - TestNeighborCacheReplace - TestNeighborCacheResolutionFailed - TestNeighborCacheResolutionTimeout - TestNeighborCacheSetConfig - TestNeighborCacheStaticResolution - TestEntryAddsAndClearsWakers - TestEntryDelayToProbe - TestEntryDelayToReachableWhenSolicitedOverrideConfirmation - TestEntryDelayToReachableWhenUpperLevelConfirmation - TestEntryDelayToStaleWhenConfirmationWithDifferentAddress - TestEntryDelayToStaleWhenProbeWithDifferentAddress - TestEntryFailedGetsDeleted - TestEntryIncompleteToFailed - TestEntryIncompleteToIncompleteDoesNotChangeUpdatedAt - TestEntryIncompleteToReachable - TestEntryIncompleteToReachableWithRouterFlag - TestEntryIncompleteToStale - TestEntryInitiallyUnknown - TestEntryProbeToFailed - TestEntryProbeToReachableWhenSolicitedConfirmationWithSameAddress - TestEntryProbeToReachableWhenSolicitedOverrideConfirmation - TestEntryProbeToStaleWhenConfirmationWithDifferentAddress - TestEntryProbeToStaleWhenProbeWithDifferentAddress - TestEntryReachableToStaleWhenConfirmationWithDifferentAddress - TestEntryReachableToStaleWhenConfirmationWithDifferentAddressAndOverride - TestEntryReachableToStaleWhenProbeWithDifferentAddress - TestEntryReachableToStaleWhenTimeout - TestEntryStaleToDelay - TestEntryStaleToReachableWhenSolicitedOverrideConfirmation - TestEntryStaleToStaleWhenOverrideConfirmation - TestEntryStaleToStaleWhenProbeUpdateAddress - TestEntryStaysDelayWhenOverrideConfirmationWithSameAddress - TestEntryStaysProbeWhenOverrideConfirmationWithSameAddress - TestEntryStaysReachableWhenConfirmationWithRouterFlag - TestEntryStaysReachableWhenProbeWithSameAddress - TestEntryStaysStaleWhenProbeWithSameAddress - TestEntryUnknownToIncomplete - TestEntryUnknownToStale - TestEntryUnknownToUnknownWhenConfirmationWithUnknownAddress pkg/tcpip/stack:stack_x_test - TestDefaultNUDConfigurations - TestNUDConfigurationFailsForNotSupported - TestNUDConfigurationsBaseReachableTime - TestNUDConfigurationsDelayFirstProbeTime - TestNUDConfigurationsMaxMulticastProbes - TestNUDConfigurationsMaxRandomFactor - TestNUDConfigurationsMaxUnicastProbes - TestNUDConfigurationsMinRandomFactor - TestNUDConfigurationsRetransmitTimer - TestNUDConfigurationsUnreachableTime - TestNUDStateReachableTime - TestNUDStateRecomputeReachableTime - TestSetNUDConfigurationFailsForBadNICID - TestSetNUDConfigurationFailsForNotSupported [1]: https://tools.ietf.org/html/rfc4861 [2]: https://tools.ietf.org/html/rfc4861#section-10 [3]: https://tools.ietf.org/html/rfc4861#appendix-C Updates #1889 Updates #1894 Updates #1895 Updates #1947 Updates #1948 Updates #1949 Updates #1950 PiperOrigin-RevId: 324070795
2020-07-30Use brodcast MAC for broadcast IPv4 packetsGhanan Gowripalan
When sending packets to a known network's broadcast address, use the broadcast MAC address. Test: - stack_test.TestOutgoingSubnetBroadcast - udp_test.TestOutgoingSubnetBroadcast PiperOrigin-RevId: 324062407
2020-07-28Redirect TODO to GitHub issuesFabricio Voznika
PiperOrigin-RevId: 323715260
2020-07-27Add ability to send unicast ARP requests and Neighbor SolicitationsSam Balana
The previous implementation of LinkAddressRequest only supported sending broadcast ARP requests and multicast Neighbor Solicitations. The ability to send these packets as unicast is required for Neighbor Unreachability Detection. Tests: pkg/tcpip/network/arp:arp_test - TestLinkAddressRequest pkg/tcpip/network/ipv6:ipv6_test - TestLinkAddressRequest Updates #1889 Updates #1894 Updates #1895 Updates #1947 Updates #1948 Updates #1949 Updates #1950 PiperOrigin-RevId: 323451569
2020-07-23Add AfterFunc to tcpip.ClockSam Balana
Changes the API of tcpip.Clock to also provide a method for scheduling and rescheduling work after a specified duration. This change also implements the AfterFunc method for existing implementations of tcpip.Clock. This is the groundwork required to mock time within tests. All references to CancellableTimer has been replaced with the tcpip.Job interface, allowing for custom implementations of scheduling work. This is a BREAKING CHANGE for clients that implement their own tcpip.Clock or use tcpip.CancellableTimer. Migration plan: 1. Add AfterFunc(d, f) to tcpip.Clock 2. Replace references of tcpip.CancellableTimer with tcpip.Job 3. Replace calls to tcpip.CancellableTimer#StopLocked with tcpip.Job#Cancel 4. Replace calls to tcpip.CancellableTimer#Reset with tcpip.Job#Schedule 5. Replace calls to tcpip.NewCancellableTimer with tcpip.NewJob. PiperOrigin-RevId: 322906897
2020-07-23iptables: use keyed array literalsKevin Krakauer
PiperOrigin-RevId: 322882426
2020-07-23Merge pull request #3207 from kevinGC:icmp-connectgVisor bot
PiperOrigin-RevId: 322853192
2020-07-22make connect(2) fail when dest is unreachableKevin Krakauer
Previously, ICMP destination unreachable datagrams were ignored by TCP endpoints. This caused connect to hang when an intermediate router couldn't find a route to the host. This manifested as a Kokoro error when Docker IPv6 was enabled. The Ruby image test would try to install the sinatra gem and hang indefinitely attempting to use an IPv6 address. Fixes #3079.
2020-07-22iptables: don't NAT existing connectionsKevin Krakauer
Fixes a NAT bug that manifested as: - A SYN was sent from gVisor to another host, unaffected by iptables. - The corresponding SYN/ACK was NATted by a PREROUTING REDIRECT rule despite being part of the existing connection. - The socket that sent the SYN never received the SYN/ACK and thus a connection could not be established. We handle this (as Linux does) by tracking all connections, inserting a no-op conntrack rule for new connections with no rules of their own. Needed for istio support (#170).
2020-07-22iptables: replace maps with arraysKevin Krakauer
For iptables users, Check() is a hot path called for every packet one or more times. Let's avoid a bunch of map lookups. PiperOrigin-RevId: 322678699
2020-07-22Support for receiving outbound packets in AF_PACKET.Bhasker Hariharan
Updates #173 PiperOrigin-RevId: 322665518
2020-07-15iptables: remove check for NetworkHeaderKevin Krakauer
This is no longer necessary, as we always set NetworkHeader before calling iptables.Check. PiperOrigin-RevId: 321461978
2020-07-15Fix minor bugs in a couple of interface IOCTLs.Bhasker Hariharan
gVisor incorrectly returns the wrong ARP type for SIOGIFHWADDR. This breaks tcpdump as it tries to interpret the packets incorrectly. Similarly, SIOCETHTOOL is used by tcpdump to query interface properties which fails with an EINVAL since we don't implement it. For now change it to return EOPNOTSUPP to indicate that we don't support the query rather than return EINVAL. NOTE: ARPHRD types for link endpoints are distinct from NIC capabilities and NIC flags. In Linux all 3 exist eg. ARPHRD types are stored in dev->type field while NIC capabilities are more like the device features which can be queried using SIOCETHTOOL but not modified and NIC Flags are fields that can be modified from user space. eg. NIC status (UP/DOWN/MULTICAST/BROADCAST) etc. Updates #2746 PiperOrigin-RevId: 321436525
2020-07-13Merge pull request #2672 from amscanne:shim-integratedgVisor bot
PiperOrigin-RevId: 321053634
2020-07-13garbage collect connectionsKevin Krakauer
As in Linux, we must periodically clean up unused connections. PiperOrigin-RevId: 321003353
2020-07-12Do not copy sleep.WakerGhanan Gowripalan
sleep.Waker's fields are modified as values. PiperOrigin-RevId: 320873451
2020-07-07icmp: When setting TransportHeader, remove from the Data portion.Ting-Yu Wang
The current convention is when a header is set to pkt.XxxHeader field, it gets removed from pkt.Data. ICMP does not currently follow this convention. PiperOrigin-RevId: 320078606
2020-07-06Shard some slow tests.Ting-Yu Wang
stack_x_test: 2m -> 20s tcp_x_test: 80s -> 25s PiperOrigin-RevId: 319828101
2020-06-25conntrack refactor, no behavior changesKevin Krakauer
- Split connTrackForPacket into 2 functions instead of switching on flag - Replace hash with struct keys. - Remove prefixes where possible - Remove unused connStatus, timeout - Flatten ConnTrack struct a bit - some intermediate structs had no meaning outside of the context of their parent. - Protect conn.tcb with a mutex - Remove redundant error checking (e.g. when is pkt.NetworkHeader valid) - Clarify that HandlePacket and CreateConnFor are the expected entrypoints for ConnTrack PiperOrigin-RevId: 318407168
2020-06-24Add support for Stack level options.Bhasker Hariharan
Linux controls socket send/receive buffers using a few sysctl variables - net.core.rmem_default - net.core.rmem_max - net.core.wmem_max - net.core.wmem_default - net.ipv4.tcp_rmem - net.ipv4.tcp_wmem The first 4 control the default socket buffer sizes for all sockets raw/packet/tcp/udp and also the maximum permitted socket buffer that can be specified in setsockopt(SOL_SOCKET, SO_(RCV|SND)BUF,...). The last two control the TCP auto-tuning limits and override the default specified in rmem_default/wmem_default as well as the max limits. Netstack today only implements tcp_rmem/tcp_wmem and incorrectly uses it to limit the maximum size in setsockopt() as well as uses it for raw/udp sockets. This changelist introduces the other 4 and updates the udp/raw sockets to use the newly introduced variables. The values for min/max match the current tcp_rmem/wmem values and the default value buffers for UDP/RAW sockets is updated to match the linux value of 212KiB up from the really low current value of 32 KiB. Updates #3043 Fixes #3043 PiperOrigin-RevId: 318089805
2020-06-23Add support for SO_REUSEADDR to TCP sockets/endpoints.Ian Gudger
For TCP sockets, SO_REUSEADDR relaxes the rules for binding addresses. gVisor/netstack already supported a behavior similar to SO_REUSEADDR, but did not allow disabling it. This change brings the SO_REUSEADDR behavior closer to the behavior implemented by Linux and adds a new SO_REUSEADDR disabled behavior. Like Linux, SO_REUSEADDR is now disabled by default. PiperOrigin-RevId: 317984380
2020-06-18iptables: skip iptables if no rules are setKevin Krakauer
Users that never set iptables rules shouldn't incur the iptables performance cost. Suggested by Ian (@iangudger). PiperOrigin-RevId: 317232921
2020-06-18iptables: remove metadata structKevin Krakauer
Metadata was useful for debugging and safety, but enough tests exist that we should see failures when (de)serialization is broken. It made stack initialization more cumbersome and it's also getting in the way of ip6tables. PiperOrigin-RevId: 317210653
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 22:09:27 +0000