summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/stack
AgeCommit message (Collapse)Author
2020-12-28Merge release-20201208.0-89-g3ff7324df (automated)gVisor bot
2020-12-22Move SO_BINDTODEVICE to socketops.Nayana Bidari
PiperOrigin-RevId: 348696094
2020-12-22Invoke address resolution upon subsequent traffic to Failed neighborPeter Johnston
Removes the period of time in which subseqeuent traffic to a Failed neighbor immediately fails with ErrNoLinkAddress. A Failed neighbor is one in which address resolution fails; or in other words, the neighbor's IP address cannot be translated to a MAC address. This means removing the Failed state for linkAddrCache and allowing transitiong out of Failed into Incomplete for neighborCache. Previously, both caches would transition entries to Failed after address resolution fails. In this state, any subsequent traffic requested within an unreachable time would immediately fail with ErrNoLinkAddress. This does not follow RFC 4861 section 7.3.3: If address resolution fails, the entry SHOULD be deleted, so that subsequent traffic to that neighbor invokes the next-hop determination procedure again. Invoking next-hop determination at this point ensures that alternate default routers are tried. The API for getting a link address for a given address, whether through the link address cache or the neighbor table, is updated to optionally take a callback which will be called when address resolution completes. This allows `Route` to handle completing link resolution internally, so callers of (*Route).Resolve (e.g. endpoints) don’t have to keep track of when it completes and update the Route accordingly. This change also removes the wakers from LinkAddressCache, NeighborCache, and Route in favor of the callbacks, and callers that previously used a waker can now just pass a callback to (*Route).Resolve that will notify the waker on resolution completion. Fixes #4796 Startblock: has LGTM from sbalana and then add reviewer ghanan PiperOrigin-RevId: 348597478
2020-12-21Prefer matching labels and longest matching prefixGhanan Gowripalan
...when performing source address selection for IPv6. These are defined in RFC 6724 section 5 rule 6 (prefer matching label) and rule 8 (use longest matching prefix). This change also considers ULA of global scope instead of its own scope, as per RFC 6724 section 3.1: Also, note that ULAs are considered as global, not site-local, scope but are handled via the prefix policy table as discussed in Section 10.6. Test: stack_test.TestIPv6SourceAddressSelectionScope Startblock: has LGTM from peterjohnston and then add reviewer brunodalbo PiperOrigin-RevId: 348580996
2020-12-17Remove duplicate `return`Tamir Duberstein
PiperOrigin-RevId: 347974624
2020-12-16Add support to count the number of packets SACKed.Nayana Bidari
sacked_out is required in RACK to check the number of duplicate acknowledgements during updating the reorder window. If there is no reordering and the value for sacked_out is greater than the classic threshold value 3, then reorder window is set to zero. It is calculated by counting the number of segments sacked in the ACK and is reduced when a cumulative ACK is received which covers the SACK blocks. This value is set to zero when the connection enters recovery. PiperOrigin-RevId: 347872246
2020-12-15Merge release-20201208.0-46-g25ebddbdd (automated)gVisor bot
2020-12-15Fix a data race in packetEPsTing-Yu Wang
packetEPs may get into a state that `len < cap`, casuing append() modifying the original slice storage. Reported-by: syzbot+978dd0e9c2600ab7a76b@syzkaller.appspotmail.com PiperOrigin-RevId: 347634351
2020-12-12Introduce IPv6 extension header serialization facilitiesBruno Dal Bo
Adds IPv6 extension header serializer and Hop by Hop options serializer. Add RouterAlert option serializer and use it in MLD. Fixed #4996 Startblock: has LGTM from marinaciocea and then add reviewer ghanan PiperOrigin-RevId: 347174537
2020-12-11[netstack] Decouple tcpip.ControlMessages from the IP control messges.Ayush Ranjan
tcpip.ControlMessages can not contain Linux specific structures which makes it painful to convert back and forth from Linux to tcpip back to Linux when passing around control messages in hostinet and raw sockets. Now we convert to the Linux version of the control message as soon as we are out of tcpip. PiperOrigin-RevId: 347027065
2020-12-10Merge release-20201130.0-80-g53a95ad0d (automated)gVisor bot
2020-12-10Use specified source address for IGMP/MLD packetsGhanan Gowripalan
This change also considers interfaces and network endpoints enabled up up to the point all work to disable them are complete. This was needed so that protocols can perform shutdown work while being disabled (e.g. sending a packet which requires the endpoint to be enabled to obtain a source address). Bug #4682, #4861 Fixes #4888 Startblock: has LGTM from peterjohnston and then add reviewer brunodalbo PiperOrigin-RevId: 346869702
2020-12-05Merge release-20201130.0-46-gdf2dbe3e3 (automated)gVisor bot
2020-12-04Remove stack.ReadOnlyAddressableEndpointStateGhanan Gowripalan
Startblock: has LGTM from asfez and then add reviewer tamird PiperOrigin-RevId: 345815146
2020-12-04Merge release-20201130.0-39-gfd28ccfaa (automated)gVisor bot
2020-12-04Introduce IPv4 options serializer and add RouterAlert to IGMPBruno Dal Bo
PiperOrigin-RevId: 345701623
2020-12-03Merge release-20201130.0-31-g3ff1aef54 (automated)gVisor bot
2020-12-03Make `stack.Route` thread safePeter Johnston
Currently we rely on the user to take the lock on the endpoint that owns the route, in order to modify it safely. We can instead move `Route.RemoteLinkAddress` under `Route`'s mutex, and allow non-locking and thread-safe access to other fields of `Route`. PiperOrigin-RevId: 345461586
2020-12-03Support partitions for other tests.Adin Scannell
PiperOrigin-RevId: 345399936
2020-12-02Extract ICMPv4/v6 specific stats to their own typesArthur Sfez
This change lets us split the v4 stats from the v6 stats, which will be useful when adding stats for each network endpoint. PiperOrigin-RevId: 345322615
2020-12-01Deflake stack_test.TestRouterSolicitationGhanan Gowripalan
...by using the fake clock. TestRouterSolicitation no longer runs its sub-tests in parallel now that the sub-tests are not long-running - the fake clock simulates time moving forward. PiperOrigin-RevId: 345165794
2020-12-02Merge release-20201117.0-88-g0c4973942 (automated)gVisor bot
2020-12-01Correctly lock when listing neighbor entriesGhanan Gowripalan
PiperOrigin-RevId: 345162450
2020-12-01Merge release-20201117.0-84-g25570ac4f (automated)gVisor bot
2020-12-01Track join count in multicast group protocol stateGhanan Gowripalan
Before this change, the join count and the state for IGMP/MLD was held across different types which required multiple locks to be held when accessing a multicast group's state. Bug #4682, #4861 Fixes #4916 PiperOrigin-RevId: 345019091
2020-11-30Merge release-20201117.0-78-ge81300866 (automated)gVisor bot
2020-11-30Perform IGMP/MLD when the NIC is enabled/disabledGhanan Gowripalan
Test: ip_test.TestMGPWithNICLifecycle Bug #4682, #4861 PiperOrigin-RevId: 344888091
2020-11-26[netstack] Add SOL_TCP options to SocketOptions.Ayush Ranjan
Ports the following options: - TCP_NODELAY - TCP_CORK - TCP_QUICKACK Also deletes the {Get/Set}SockOptBool interface methods from all implementations PiperOrigin-RevId: 344378824
2020-11-25[netstack] Add SOL_IP and SOL_IPV6 options to SocketOptions.Ayush Ranjan
We will use SocketOptions for all kinds of options, not just SOL_SOCKET options because (1) it is consistent with Linux which defines all option variables on the top level socket struct, (2) avoid code complexity. Appropriate checks have been added for matching option level to the endpoint type. Ported the following options to this new utility: - IP_MULTICAST_LOOP - IP_RECVTOS - IPV6_RECVTCLASS - IP_PKTINFO - IP_HDRINCL - IPV6_V6ONLY Changes in behavior (these are consistent with what Linux does AFAICT): - Now IP_MULTICAST_LOOP can be set for TCP (earlier it was a noop) but does not affect the endpoint itself. - We can now getsockopt IP_HDRINCL (earlier we would get an error). - Now we return ErrUnknownProtocolOption if SOL_IP or SOL_IPV6 options are used on unix sockets. - Now we return ErrUnknownProtocolOption if SOL_IPV6 options are used on non AF_INET6 endpoints. This change additionally makes the following modifications: - Add State() uint32 to commonEndpoint because both tcpip.Endpoint and transport.Endpoint interfaces have it. It proves to be quite useful. - Gets rid of SocketOptionsHandler.IsListening(). It was an anomaly as it was not a handler. It is now implemented on netstack itself. - Gets rid of tcp.endpoint.EndpointInfo and directly embeds stack.TransportEndpointInfo. There was an unnecessary level of embedding which served no purpose. - Removes some checks dual_stack_test.go that used the errors from GetSockOptBool(tcpip.V6OnlyOption) to confirm some state. This is not consistent with the new design and also seemed to be testing the implementation instead of behavior. PiperOrigin-RevId: 344354051
2020-11-25Support listener-side MLDv1Ghanan Gowripalan
...as defined by RFC 2710. Querier (router)-side MLDv1 is not yet supported. The core state machine is shared with IGMPv2. This is guarded behind a flag (ipv6.Options.MLDEnabled). Tests: ip_test.TestMGP* Bug #4861 PiperOrigin-RevId: 344344095
2020-11-25Merge release-20201109.0-117-g2485a4e2c (automated)gVisor bot
2020-11-25Make stack.Route safe to access concurrentlyGhanan Gowripalan
Multiple goroutines may use the same stack.Route concurrently so the stack.Route should make sure that any functions called on it are thread-safe. Fixes #4073 PiperOrigin-RevId: 344320491
2020-11-24Merge release-20201109.0-114-g99f2d0ea2 (automated)gVisor bot
2020-11-24Correctly lock when removing neighbor entriesSam Balana
Fix a panic when two entries in Failed state are removed at the same time. PiperOrigin-RevId: 344143777
2020-11-24Merge release-20201109.0-112-gf90ab60a8 (automated)gVisor bot
2020-11-24Track number of packets queued to Failed neighborsSam Balana
Add a NIC-specific neighbor table statistic so we can determine how many packets have been queued to Failed neighbors, indicating an unhealthy local network. This change assists us to debug in-field issues where subsequent traffic to a neighbor fails. Fixes #4819 PiperOrigin-RevId: 344131119
2020-11-24Deduplicate code in ipv6.protocolGhanan Gowripalan
PiperOrigin-RevId: 344009602
2020-11-20Merge release-20201109.0-95-gfbc4a8dbd (automated)gVisor bot
2020-11-19Perform IGMPv2 when joining IPv4 multicast groupsRyan Heacock
Added headers, stats, checksum parsing capabilities from RFC 2236 describing IGMPv2. IGMPv2 state machine is implemented for each condition, sending and receiving IGMP Membership Reports and Leave Group messages with backwards compatibility with IGMPv1 routers. Test: * Implemented igmp header parser and checksum calculator in header/igmp_test.go * ipv4/igmp_test.go tests incoming and outgoing IGMP messages and pathways. * Added unit test coverage for IGMPv2 RFC behavior + IGMPv1 backwards compatibility in ipv4/igmp_test.go. Fixes #4682 PiperOrigin-RevId: 343408809
2020-11-19Merge release-20201109.0-90-g209a95a35 (automated)gVisor bot
2020-11-19Propagate IP address prefix from host to netstackFabricio Voznika
Closes #4022 PiperOrigin-RevId: 343378647
2020-11-19Merge release-20201109.0-88-g27ee4fe76 (automated)gVisor bot
2020-11-19Don't hold AddressEndpoints for multicast addressesGhanan Gowripalan
Group addressable endpoints can simply check if it has joined the multicast group without maintaining address endpoints. This also helps remove the dependency on AddressableEndpoint from GroupAddressableEndpoint. Now that group addresses are not tracked with address endpoints, we can avoid accidentally obtaining a route with a multicast local address. PiperOrigin-RevId: 343336912
2020-11-19Merge release-20201109.0-83-g93750a600 (automated)gVisor bot
2020-11-18Remove unused methods from stack.RouteGhanan Gowripalan
PiperOrigin-RevId: 343211553
2020-11-18[netstack] Move SO_REUSEPORT and SO_REUSEADDR option to SocketOptions.Ayush Ranjan
This changes also introduces: - `SocketOptionsHandler` interface which can be implemented by endpoints to handle endpoint specific behavior on SetSockOpt. This is analogous to what Linux does. - `DefaultSocketOptionsHandler` which is a default implementation of the above. This is embedded in all endpoints so that we don't have to uselessly implement empty functions. Endpoints with specific behavior can override the embedded method by manually defining its own implementation. PiperOrigin-RevId: 343158301
2020-11-18Merge release-20201109.0-75-g60b97bfda (automated)gVisor bot
2020-11-18Fix loopback subnet routing errorGhanan Gowripalan
Packets should be properly routed when sending packets to addresses in the loopback subnet which are not explicitly assigned to the loopback interface. Tests: - integration_test.TestLoopbackAcceptAllInSubnetUDP - integration_test.TestLoopbackAcceptAllInSubnetTCP PiperOrigin-RevId: 343135643
2020-11-18Merge release-20201109.0-69-g9d148627f (automated)gVisor bot
2020-11-18Introduce stack.WritePacketToRemote, remove LinkEndpoint.WriteRawPacketBruno Dal Bo
Redefine stack.WritePacket into stack.WritePacketToRemote which lets the NIC decide whether to append link headers. PiperOrigin-RevId: 343071742
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 04:55:36 +0000