summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/stack/stack.go
AgeCommit message (Collapse)Author
2019-09-17Automated rollback of changelist 268047073Ghanan Gowripalan
PiperOrigin-RevId: 269658971
2019-09-12Automated rollback of changelist 268047073Ghanan Gowripalan
PiperOrigin-RevId: 268757842
2019-09-09Join IPv6 all-nodes and solicited-node multicast addresses where appropriate.Ghanan Gowripalan
The IPv6 all-nodes multicast address will be joined on NIC enable, and the appropriate IPv6 solicited-node multicast address will be joined when IPv6 addresses are added. Tests: Test receiving packets destined to the IPv6 link-local all-nodes multicast address and the IPv6 solicted node address of an added IPv6 address. PiperOrigin-RevId: 268047073
2019-09-06Remove reundant global tcpip.LinkEndpointID.Ian Gudger
PiperOrigin-RevId: 267709597
2019-09-04Handle subnet and broadcast addresses correctly with NIC.subnetsChris Kuiper
This also renames "subnet" to "addressRange" to avoid any more confusion with an interface IP's subnet. Lastly, this also removes the Stack.ContainsSubnet(..) API since it isn't used by anyone. Plus the same information can be obtained from Stack.NICAddressRanges(). PiperOrigin-RevId: 267229843
2019-09-03Make UDP traceroute work.Bhasker Hariharan
Adds support to generate Port Unreachable messages for UDP datagrams received on a port for which there is no valid endpoint. Fixes #703 PiperOrigin-RevId: 267034418
2019-08-21Use tcpip.Subnet in tcpip.RouteTamir Duberstein
This is the first step in replacing some of the redundant types with the standard library equivalents. PiperOrigin-RevId: 264706552
2019-08-08netstack: Don't start endpoint goroutines too soon on restore.Rahat Mahmood
Endpoint protocol goroutines were previously started as part of loading the endpoint. This is potentially too soon, as resources used by these goroutine may not have been loaded. Protocol goroutines may perform meaningful work as soon as they're started (ex: incoming connect) which can cause them to indirectly access resources that haven't been loaded yet. This CL defers resuming all protocol goroutines until the end of restore. PiperOrigin-RevId: 262409429
2019-08-02Plumbing for iptables sockopts.Kevin Krakauer
PiperOrigin-RevId: 261413396
2019-08-02Automated rollback of changelist 261191548Rahat Mahmood
PiperOrigin-RevId: 261373749
2019-08-01Implement getsockopt(TCP_INFO).Rahat Mahmood
Export some readily-available fields for TCP_INFO and stub out the rest. PiperOrigin-RevId: 261191548
2019-07-30Pass ProtocolAddress instead of its fieldsTamir Duberstein
PiperOrigin-RevId: 260803517
2019-07-24Add support for a subnet prefix length on interface network addressesChris Kuiper
This allows the user code to add a network address with a subnet prefix length. The prefix length value is stored in the network endpoint and provided back to the user in the ProtocolAddress type. PiperOrigin-RevId: 259807693
2019-07-12Add IPPROTO_RAW, which allows raw sockets to write IP headers.Kevin Krakauer
iptables also relies on IPPROTO_RAW in a way. It opens such a socket to manipulate the kernel's tables, but it doesn't actually use any of the functionality. Blegh. PiperOrigin-RevId: 257903078
2019-06-13Add support for TCP receive buffer auto tuning.Bhasker Hariharan
The implementation is similar to linux where we track the number of bytes consumed by the application to grow the receive buffer of a given TCP endpoint. This ensures that the advertised window grows at a reasonable rate to accomodate for the sender's rate and prevents large amounts of data being held in stack buffers if the application is not actively reading or not reading fast enough. The original paper that was used to implement the linux receive buffer auto- tuning is available @ https://public.lanl.gov/radiant/pubs/drs/lacsi2001.pdf NOTE: Linux does not implement DRS as defined in that paper, it's just a good reference to understand the solution space. Updates #230 PiperOrigin-RevId: 253168283
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-05-03Implement support for SACK based recovery(RFC 6675).Bhasker Hariharan
PiperOrigin-RevId: 246536003 Change-Id: I118b745f45040be9c70cb6a1028acdb06c78d8c9
2019-05-02Support reception of multicast data on more than one socketChris Kuiper
This requires two changes: 1) Support for more than one socket to join a given multicast group. 2) Duplicate delivery of incoming multicast packets to all sockets listening for it. In addition, I tweaked the code (and added a test) to disallow duplicates IP_ADD_MEMBERSHIP calls for the same group and NIC. This is how Linux does it. PiperOrigin-RevId: 246437315 Change-Id: Icad8300b4a8c3f501d9b4cd283bd3beabef88b72
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-04-29Allow and document bug ids in gVisor codebase.Nicolas Lacasse
PiperOrigin-RevId: 245818639 Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
2019-04-26Make raw sockets a toggleable feature disabled by default.Kevin Krakauer
PiperOrigin-RevId: 245511019 Change-Id: Ia9562a301b46458988a6a1f0bbd5f07cbfcb0615
2019-04-02Add a raw socket transport endpoint and use it for raw ICMP sockets.Kevin Krakauer
Having raw socket code together will make it easier to add support for other raw network protocols. Currently, only ICMP uses the raw endpoint. However, adding support for other protocols such as UDP shouldn't be much more difficult than adding a few switch cases. PiperOrigin-RevId: 241564875 Change-Id: I77e03adafe4ce0fd29ba2d5dfdc547d2ae8f25bf
2019-03-19Add layer 2 stats (tx, rx) X (packets, bytes) to netstackBert Muthalaly
PiperOrigin-RevId: 239194420 Change-Id: Ie193e8ac2b7a6db21195ac85824a335930483971
2019-03-12Make HandleLocal apply to all non-loopback interfaces.Ian Gudger
HandleLocal is very similar conceptually to MULTICAST_LOOP, so we can unify the implementations. This has the benefit of making HandleLocal apply even when the fdbased link endpoint isn't in use. In addition, move looping logic to route creation so that it doesn't need to be run for each packet. This should improve performance. PiperOrigin-RevId: 238099480 Change-Id: I72839f16f25310471453bc9d3fb8544815b25c23
2019-03-08Implement IP_MULTICAST_LOOP.Ian Gudger
IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default route are looped back. In order to implement this switch, support for sending and looping back multicast packets on the default route had to be implemented. For now we only support IPv4 multicast. PiperOrigin-RevId: 237534603 Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
2019-02-28Map IPv{4,6} addresses to ethernet addressesTamir Duberstein
...in accordance with RFCs 1112 and 2464. Fixes IPv4 multicast when IP_MULTICAST_IF is specified. Don't return ErrNoRoute when no route is needed. Don't set Route.NextHop when no route is needed. PiperOrigin-RevId: 236199813 Change-Id: I48ed33e1b7f760deaa37e18ad7f1b8b62819ab43
2019-02-27Ping support via IPv4 raw sockets.Kevin Krakauer
Broadly, this change: * Enables sockets to be created via `socket(AF_INET, SOCK_RAW, IPPROTO_ICMP)`. * Passes the network-layer (IP) header up the stack to the transport endpoint, which can pass it up to the socket layer. This allows a raw socket to return the entire IP packet to users. * Adds functions to stack.TransportProtocol, stack.Stack, stack.transportDemuxer that enable incoming packets to be delivered to raw endpoints. New raw sockets of other protocols (not ICMP) just need to register with the stack. * Enables ping.endpoint to return IP headers when created via SOCK_RAW. PiperOrigin-RevId: 235993280 Change-Id: I60ed994f5ff18b2cbd79f063a7fdf15d093d845a
2019-02-15Implement IP_MULTICAST_IF.Ian Gudger
This allows setting a default send interface for IPv4 multicast. IPv6 support will come later. PiperOrigin-RevId: 234251379 Change-Id: I65922341cd8b8880f690fae3eeb7ddfa47c8c173
2019-02-07Plumb IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP to netstack.Ian Gudger
Also includes a few fixes for IPv4 multicast support. IPv6 support is coming in a followup CL. PiperOrigin-RevId: 233008638 Change-Id: If7dae6222fef43fda48033f0292af77832d95e82
2018-12-28Implement SO_REUSEPORT for TCP and UDP socketsAndrei Vagin
This option allows multiple sockets to be bound to the same port. Incoming packets are distributed to sockets using a hash based on source and destination addresses. This means that all packets from one sender will be received by the same server socket. PiperOrigin-RevId: 227153413 Change-Id: I59b6edda9c2209d5b8968671e9129adb675920cf
2018-12-16Allow sending of multicast and IPv6 link-local packets w/o route.Chris Kuiper
Same as with broadcast packets, sending of a multicast packet shouldn't require accessing the route table. The same applies to IPv6 link-local addresses, which aren't routable at all (they don't belong to any subnet by definition). PiperOrigin-RevId: 225775870 Change-Id: Ic53e6560c125a83be2be9c3d112e66b36e8dfe7b
2018-12-06Allow sending of broadcast packets w/o route.Chris Kuiper
Currently sending a broadcast packet (for DHCP, e.g.) requires a "default route" of the format "0.0.0.0/0 via 0.0.0.0 <intf>". There is no good reason for this and on devices with several ports this creates a rather akward route table with lots of such default routes (which defeats the purpose of a default route). PiperOrigin-RevId: 224378769 Change-Id: Icd7ec8a206eb08083cff9a837f6f9ab231c73a19
2018-11-09Add an implementation of a SACK scoreboard as per RFC6675.Bhasker Hariharan
PiperOrigin-RevId: 220866996 Change-Id: I89d48215df57c00d6a6ec512fc18712a2ea9080b
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-09-28Block for link address resolutionSepehr Raissian
Previously, if address resolution for UDP or Ping sockets required sending packets using Write in Transport layer, Resolve would return ErrWouldBlock and Write would return ErrNoLinkAddress. Meanwhile startAddressResolution would run in background. Further calls to Write using same address would also return ErrNoLinkAddress until resolution has been completed successfully. Since Write is not allowed to block and System Calls need to be interruptible in System Call layer, the caller to Write is responsible for blocking upon return of ErrWouldBlock. Now, when startAddressResolution is called a notification channel for the completion of the address resolution is returned. The channel will traverse up to the calling function of Write as well as ErrNoLinkAddress. Once address resolution is complete (success or not) the channel is closed. The caller would call Write again to send packets and check if address resolution was compeleted successfully or not. Fixes google/gvisor#5 Change-Id: Idafaf31982bee1915ca084da39ae7bd468cebd93 PiperOrigin-RevId: 214962200
2018-09-17Implement packet forwarding to enable NATTamir Duberstein
PiperOrigin-RevId: 213323501 Change-Id: I0996ddbdcf097588745efe35481085d42dbaf446
2018-09-12Always pass buffer.VectorisedView by valueTamir Duberstein
PiperOrigin-RevId: 212757571 Change-Id: I04200df9e45c21eb64951cd2802532fa84afcb1a
2018-09-12Add multicast supportTamir Duberstein
PiperOrigin-RevId: 212750821 Change-Id: I822fd63e48c684b45fd91f9ce057867b7eceb792
2018-09-05Implement Subnet removalTamir Duberstein
This was used to implement https://fuchsia-review.googlesource.com/c/garnet/+/177771. PiperOrigin-RevId: 211725098 Change-Id: Ib0acc7c13430b7341e8e0ec6eb5fc35f5cee5083
2018-08-25Upstreaming DHCP changes from FuchsiaTamir Duberstein
PiperOrigin-RevId: 210221388 Change-Id: Ic82d592b8c4778855fa55ba913f6b9a10b2d511f
2018-08-23Encapsulate netstack metricsIan Gudger
PiperOrigin-RevId: 209943212 Change-Id: I96dcbc7c2ab2426e510b94a564436505256c5c79
2018-08-21Expose route tableGoogler
PiperOrigin-RevId: 209670528 Change-Id: I2890bcdef36f0b5f24b372b42cf628b38dd5764e
2018-08-08Basic support for ip link/addr and ifconfigFabricio Voznika
Closes #94 PiperOrigin-RevId: 207997580 Change-Id: I19b426f1586b5ec12f8b0cd5884d5b401d334924
2018-08-08Resend packets back to netstack if destined to itselfFabricio Voznika
Add option to redirect packet back to netstack if it's destined to itself. This fixes the problem where connecting to the local NIC address would not work, e.g.: echo bar | nc -l -p 8080 & echo foo | nc 192.168.0.2 8080 PiperOrigin-RevId: 207995083 Change-Id: I17adc2a04df48bfea711011a5df206326a1fb8ef
2018-08-07Adds support to dump out cubic internal state.Bhasker Hariharan
PiperOrigin-RevId: 207754087 Change-Id: I83abce64348ea93f8692da81a881b364dae2158b
2018-08-01Move stack clock to options structIan Gudger
PiperOrigin-RevId: 207039273 Change-Id: Ib8f55a6dc302052ab4a10ccd70b07f0d73b373df
2018-07-11Automated rollback of changelist 203157739Bhasker Hariharan
PiperOrigin-RevId: 204196916 Change-Id: If632750fc6368acb835e22cfcee0ae55c8a04d16
2018-07-09Switch netstack licenses to Apache 2.0.Nicolas Lacasse
Fixes #27 PiperOrigin-RevId: 203825288 Change-Id: Ie9f3a2b2c1e296b026b024f75c07da1a7e118633
2018-07-03Resend packets back to netstack if destined to itselfFabricio Voznika
Add option to redirect packet back to netstack if it's destined to itself. This fixes the problem where connecting to the local NIC address would not work, e.g.: echo bar | nc -l -p 8080 & echo foo | nc 192.168.0.2 8080 PiperOrigin-RevId: 203157739 Change-Id: I31c9f7c501e3f55007f25e1852c27893a16ac6c4
2018-05-22sentry: Add simple SIOCGIFFLAGS support (IFF_RUNNING and IFF_PROMIS).Kevin Krakauer
Establishes a way of communicating interface flags between netstack and epsocket. More flags can be added over time. PiperOrigin-RevId: 197616669 Change-Id: I230448c5fb5b7d2e8d69b41a451eb4e1096a0e30