summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/stack/route.go
AgeCommit message (Collapse)Author
2019-09-03Make UDP traceroute work.Bhasker Hariharan
Adds support to generate Port Unreachable messages for UDP datagrams received on a port for which there is no valid endpoint. Fixes #703 PiperOrigin-RevId: 267034418
2019-08-26Prevent a network endpoint to send/rcv if its address was removedChris Kuiper
This addresses the problem where an endpoint has its address removed but still has outstanding references held by routes used in connected TCP/UDP sockets which prevent the removal of the endpoint. The fix adds a new "expired" flag to the referenced network endpoint, which is set when an endpoint has its address removed. Incoming packets are not delivered to an expired endpoint (unless in promiscuous mode), while sending outgoing packets triggers an error to the caller (unless in spoofing mode). In addition, a few helper functions were added to stack_test.go to reduce code duplications. PiperOrigin-RevId: 265514326
2019-07-12Add IPPROTO_RAW, which allows raw sockets to write IP headers.Kevin Krakauer
iptables also relies on IPPROTO_RAW in a way. It opens such a socket to manipulate the kernel's tables, but it doesn't actually use any of the functionality. Blegh. PiperOrigin-RevId: 257903078
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-05Adjust route when looping multicast packetsChris Kuiper
Multicast packets are special in that their destination address does not identify a specific interface. When sending out such a packet the multicast address is the remote address, but for incoming packets it is the local address. Hence, when looping a multicast packet, the route needs to be tweaked to reflect this. PiperOrigin-RevId: 251739298
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-03-28netstack/fdbased: add generic segmentation offload (GSO) supportAndrei Vagin
The linux packet socket can handle GSO packets, so we can segment packets to 64K instead of the MTU which is usually 1500. Here are numbers for the nginx-1m test: runsc: 579330.01 [Kbytes/sec] received runsc-gso: 1794121.66 [Kbytes/sec] received runc: 2122139.06 [Kbytes/sec] received and for tcp_benchmark: $ tcp_benchmark --duration 15 --ideal [ 4] 0.0-15.0 sec 86647 MBytes 48456 Mbits/sec $ tcp_benchmark --client --duration 15 --ideal [ 4] 0.0-15.0 sec 2173 MBytes 1214 Mbits/sec $ tcp_benchmark --client --duration 15 --ideal --gso 65536 [ 4] 0.0-15.0 sec 19357 MBytes 10825 Mbits/sec PiperOrigin-RevId: 240809103 Change-Id: I2637f104db28b5d4c64e1e766c610162a195775a
2019-03-26netstack: Don't exclude length when a pseudo-header checksum is calculatedAndrei Vagin
This is a preparation for GSO changes (cl/234508902). RELNOTES[gofers]: Refactor checksum code to include length, which it already did, but in a convoluted way. Should be a no-op. PiperOrigin-RevId: 240460794 Change-Id: I537381bc670b5a9f5d70a87aa3eb7252e8f5ace2
2019-03-19Add layer 2 stats (tx, rx) X (packets, bytes) to netstackBert Muthalaly
PiperOrigin-RevId: 239194420 Change-Id: Ie193e8ac2b7a6db21195ac85824a335930483971
2019-03-12Make HandleLocal apply to all non-loopback interfaces.Ian Gudger
HandleLocal is very similar conceptually to MULTICAST_LOOP, so we can unify the implementations. This has the benefit of making HandleLocal apply even when the fdbased link endpoint isn't in use. In addition, move looping logic to route creation so that it doesn't need to be run for each packet. This should improve performance. PiperOrigin-RevId: 238099480 Change-Id: I72839f16f25310471453bc9d3fb8544815b25c23
2019-03-08Implement IP_MULTICAST_LOOP.Ian Gudger
IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default route are looped back. In order to implement this switch, support for sending and looping back multicast packets on the default route had to be implemented. For now we only support IPv4 multicast. PiperOrigin-RevId: 237534603 Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-09-28Block for link address resolutionSepehr Raissian
Previously, if address resolution for UDP or Ping sockets required sending packets using Write in Transport layer, Resolve would return ErrWouldBlock and Write would return ErrNoLinkAddress. Meanwhile startAddressResolution would run in background. Further calls to Write using same address would also return ErrNoLinkAddress until resolution has been completed successfully. Since Write is not allowed to block and System Calls need to be interruptible in System Call layer, the caller to Write is responsible for blocking upon return of ErrWouldBlock. Now, when startAddressResolution is called a notification channel for the completion of the address resolution is returned. The channel will traverse up to the calling function of Write as well as ErrNoLinkAddress. Once address resolution is complete (success or not) the channel is closed. The caller would call Write again to send packets and check if address resolution was compeleted successfully or not. Fixes google/gvisor#5 Change-Id: Idafaf31982bee1915ca084da39ae7bd468cebd93 PiperOrigin-RevId: 214962200
2018-09-14Pass buffer.Prependable by valueTamir Duberstein
PiperOrigin-RevId: 213053370 Change-Id: I60ea89572b4fca53fd126c870fcbde74fcf52562
2018-09-12Add multicast supportTamir Duberstein
PiperOrigin-RevId: 212750821 Change-Id: I822fd63e48c684b45fd91f9ce057867b7eceb792
2018-09-05Update {LinkEndpoint,NetworkEndpoint}#WritePacket to take a VectorisedViewBert Muthalaly
Makes it possible to avoid copying or allocating in cases where DeliverNetworkPacket (rx) needs to turn around and call WritePacket (tx) with its VectorisedView. Also removes the restriction on having VectorisedViews with multiple views in the write path. PiperOrigin-RevId: 211728717 Change-Id: Ie03a65ecb4e28bd15ebdb9c69f05eced18fdfcff
2018-08-27Add various statisticsTamir Duberstein
PiperOrigin-RevId: 210442599 Change-Id: I9498351f461dc69c77b7f815d526c5693bec8e4a
2018-08-08Resend packets back to netstack if destined to itselfFabricio Voznika
Add option to redirect packet back to netstack if it's destined to itself. This fixes the problem where connecting to the local NIC address would not work, e.g.: echo bar | nc -l -p 8080 & echo foo | nc 192.168.0.2 8080 PiperOrigin-RevId: 207995083 Change-Id: I17adc2a04df48bfea711011a5df206326a1fb8ef
2018-07-11Automated rollback of changelist 203157739Bhasker Hariharan
PiperOrigin-RevId: 204196916 Change-Id: If632750fc6368acb835e22cfcee0ae55c8a04d16
2018-07-09Switch netstack licenses to Apache 2.0.Nicolas Lacasse
Fixes #27 PiperOrigin-RevId: 203825288 Change-Id: Ie9f3a2b2c1e296b026b024f75c07da1a7e118633
2018-07-03Resend packets back to netstack if destined to itselfFabricio Voznika
Add option to redirect packet back to netstack if it's destined to itself. This fixes the problem where connecting to the local NIC address would not work, e.g.: echo bar | nc -l -p 8080 & echo foo | nc 192.168.0.2 8080 PiperOrigin-RevId: 203157739 Change-Id: I31c9f7c501e3f55007f25e1852c27893a16ac6c4
2018-04-28Check in gVisor.Googler
PiperOrigin-RevId: 194583126 Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 10:22:06 +0000