summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/stack/nic.go
AgeCommit message (Collapse)Author
2020-04-14Attempt SLAAC address regeneration on DAD conflictsGhanan Gowripalan
As per RFC 7217 section 6, attempt to regenerate IPv6 SLAAC address in response to a DAD conflict if the address was generated with an opaque IID as outlined in RFC 7217 section 5. Test: - stack_test.TestAutoGenAddrWithOpaqueIIDDADRetries - stack_test.TestAutoGenAddrWithEUI64IIDNoDADRetries - stack_test.TestAutoGenAddrContinuesLifetimesAfterRetry PiperOrigin-RevId: 306555645
2020-03-26Use panic instead of log.FatalfGhanan Gowripalan
PiperOrigin-RevId: 303212189
2020-03-24Move tcpip.PacketBuffer and IPTables to stack package.Bhasker Hariharan
This is a precursor to be being able to build an intrusive list of PacketBuffers for use in queuing disciplines being implemented. Updates #2214 PiperOrigin-RevId: 302677662
2020-03-13Refactor SLAAC address state into SLAAC prefix stateGhanan Gowripalan
Previously, SLAAC related state was stored on a per-address basis. This was sufficient for the simple case of a single SLAAC address per prefix, but future CLs will introduce temporary addresses which will result in multiple SLAAC addresses for a prefix. This refactor allows storing multiple addresses for a prefix in a single SLAAC prefix state. No behaviour changes - existing tests continue to pass. PiperOrigin-RevId: 300832812
2020-03-13Disable a NIC before removing itGhanan Gowripalan
When a NIC is removed, attempt to disable the NIC first to cleanup dynamic state and stop ongoing periodic tasks (e.g. IPv6 router solicitations, DAD) so that a removed NIC does not attempt to send packets. Tests: - stack_test.TestRemoveUnknownNIC - stack_test.TestRemoveNIC - stack_test.TestDADStop - stack_test.TestCleanupNDPState - stack_test.TestRouteWithDownNIC - stack_test.TestStopStartSolicitingRouters PiperOrigin-RevId: 300805857
2020-03-13Honour the link's MaxHeaderLength when forwardingGhanan Gowripalan
LinkEndpoints may expect/assume that the a tcpip.PacketBuffer's Header has enough capacity for its own headers, as per documentation for LinkEndpoint.MaxHeaderLength. Test: stack_test.TestNICForwarding PiperOrigin-RevId: 300784192
2020-03-11Merge pull request #1975 from nybidari:iptablesgVisor bot
PiperOrigin-RevId: 300362789
2020-03-11Automated rollback of changelist 300217972gVisor bot
PiperOrigin-RevId: 300308974
2020-03-10Honour the link's MaxHeaderLength when forwardingGhanan Gowripalan
This change also updates where the IP packet buffer is held in an outbound tcpip.PacketBuffer from Header to Data. This change removes unncessary copying of the IP packet buffer when forwarding. Test: stack_test.TestNICForwarding PiperOrigin-RevId: 300217972
2020-03-10The packet forwarding should resolve the link address if necessary.gVisor bot
Fixes #1510 Test: - stack_test.TestForwardingWithStaticResolver - stack_test.TestForwardingWithFakeResolver - stack_test.TestForwardingWithNoResolver - stack_test.TestForwardingWithFakeResolverPartialTimeout - stack_test.TestForwardingWithFakeResolverTwoPackets - stack_test.TestForwardingWithFakeResolverManyPackets - stack_test.TestForwardingWithFakeResolverManyResolutions PiperOrigin-RevId: 300182570
2020-03-02Do not read-lock NIC recursivelyGhanan Gowripalan
A deadlock may occur if a write lock on a RWMutex is blocked between nested read lock attempts as the inner read lock attempt will be blocked in this scenario. Example (T1 and T2 are differnt goroutines): T1: obtain read-lock T2: attempt write-lock (blocks) T1: attempt inner/nested read-lock (blocks) Here we can see that T1 and T2 are deadlocked. Tests: Existing tests pass. PiperOrigin-RevId: 298426678
2020-02-25Merge branch 'master' into iptablesnybidari
2020-02-25Add nat table support for iptables.Nayana Bidari
- commit the changes for the comments.
2020-02-21Implement tap/tun device in vfs.Ting-Yu Wang
PiperOrigin-RevId: 296526279
2020-02-21Attach LinkEndpoint to NetworkDispatcher immediatelyGhanan Gowripalan
Tests: stack_test.TestAttachToLinkEndpointImmediately PiperOrigin-RevId: 296474068
2020-02-20Support disabling a NICgVisor bot
- Disabled NICs will have their associated NDP state cleared. - Disabled NICs will not accept incoming packets. - Writes through a Route with a disabled NIC will return an invalid endpoint state error. - stack.Stack.FindRoute will not return a route with a disabled NIC. - NIC's Running flag will report the NIC's enabled status. Tests: - stack_test.TestDisableUnknownNIC - stack_test.TestDisabledNICsNICInfoAndCheckNIC - stack_test.TestRoutesWithDisabledNIC - stack_test.TestRouteWritePacketWithDisabledNIC - stack_test.TestStopStartSolicitingRouters - stack_test.TestCleanupNDPState - stack_test.TestAddRemoveIPv4BroadcastAddressOnNICEnableDisable - stack_test.TestJoinLeaveAllNodesMulticastOnNICEnableDisable PiperOrigin-RevId: 296298588
2020-02-18Add nat table support for iptables.Nayana Bidari
Add nat table support for Prerouting hook with Redirect option. Add tests to check redirect of ports.
2020-02-11Disallow duplicate NIC names.gVisor bot
PiperOrigin-RevId: 294500858
2020-02-06Auto-generate link-local address as a SLAAC addressGhanan Gowripalan
Auto-generated link-local addresses should have the same lifecycle hooks as global SLAAC addresses. The Stack's NDP dispatcher should be notified when link-local addresses are auto-generated and invalidated. They should also be removed when a NIC is disabled (which will be supported in a later change). Tests: - stack_test.TestNICAutoGenAddrWithOpaque - stack_test.TestNICAutoGenAddr PiperOrigin-RevId: 293706760
2020-02-06Perform DAD on IPv6 addresses when enabling a NICGhanan Gowripalan
Addresses may be added before a NIC is enabled. Make sure DAD is performed on the permanent IPv6 addresses when they get enabled. Test: - stack_test.TestDoDADWhenNICEnabled - stack.TestDisabledRxStatsWhenNICDisabled PiperOrigin-RevId: 293697429
2020-01-24Lock the NIC when checking if an address is tentativeGhanan Gowripalan
PiperOrigin-RevId: 291426657
2020-01-22Use embedded mutex pattern for stack.NICGhanan Gowripalan
- Wrap NIC's fields that should only be accessed while holding the mutex in an anonymous struct with the embedded mutex. - Make sure NIC's spoofing and promiscuous mode flags are only read while holding the NIC's mutex. - Use the correct endpoint when sending DAD messages. - Do not hold the NIC's lock when sending DAD messages. This change does not introduce any behaviour changes. Tests: Existing tests continue to pass. PiperOrigin-RevId: 291036251
2020-01-21Merge pull request #1558 from kevinGC:iptables-write-input-dropgVisor bot
PiperOrigin-RevId: 290793754
2020-01-17Filter out received packets with a local source IP address.Eyal Soha
CERT Advisory CA-96.21 III. Solution advises that devices drop packets which could not have correctly arrived on the wire, such as receiving a packet where the source IP address is owned by the device that sent it. Fixes #1507 PiperOrigin-RevId: 290378240
2020-01-17Remove addPermanentAddressLockedTamir Duberstein
It was possible to use this function incorrectly, and its separation wasn't buying us anything. PiperOrigin-RevId: 290311100
2020-01-15Support upgrading expired/removed IPv6 addresses to permanent SLAAC addressesGhanan Gowripalan
If a previously added IPv6 address (statically or via SLAAC) was removed, it would be left in an expired state waiting to be cleaned up if any references to it were still held. During this time, the same address could be regenerated via SLAAC, which should be allowed. This change supports this scenario. When upgrading an endpoint from temporary or permanentExpired to permanent, respect the new configuration type (static or SLAAC) and deprecated status, along with the new PrimaryEndpointBehavior (which was already supported). Test: stack.TestAutoGenAddrAfterRemoval PiperOrigin-RevId: 289990168
2020-01-15Solicit IPv6 routers when a NIC becomes enabled as a hostGhanan Gowripalan
This change adds support to send NDP Router Solicitation messages when a NIC becomes enabled as a host, as per RFC 4861 section 6.3.7. Note, Router Solicitations will only be sent when the stack has forwarding disabled. Tests: Unittests to make sure that the initial Router Solicitations are sent as configured. The tests also validate the sent Router Solicitations' fields. PiperOrigin-RevId: 289964095
2020-01-14Implement {g,s}etsockopt(IP_RECVTOS) for UDP socketsTamir Duberstein
PiperOrigin-RevId: 289718534
2020-01-13Do Source Address Selection when choosing an IPv6 source addressGhanan Gowripalan
Do Source Address Selection when choosing an IPv6 source address as per RFC 6724 section 5 rules 1-3: 1) Prefer same address 2) Prefer appropriate scope 3) Avoid deprecated addresses. A later change will update Source Address Selection to follow rules 4-8. Tests: Rule 1 & 2: stack.TestIPv6SourceAddressSelectionScopeAndSameAddress, Rule 3: stack.TestAutoGenAddrTimerDeprecation, stack.TestAutoGenAddrDeprecateFromPI PiperOrigin-RevId: 289559373
2020-01-13Merge branch 'master' into iptables-write-input-dropKevin Krakauer
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2020-01-09Allow clients to store an opaque NICContext with NICsBert Muthalaly
...retrievable later via stack.NICInfo(). Clients of this library can use it to add metadata that should be tracked alongside a NIC, to avoid having to keep a map[tcpip.NICID]metadata mirroring stack.Stack's nic map. PiperOrigin-RevId: 288924900
2020-01-08Getting a panic when running tests. For some reason the filter table isKevin Krakauer
ending up with the wrong chains and is indexing -1 into rules.
2020-01-08Add NIC.isLoopback()Bert Muthalaly
...enabling us to remove the "CreateNamedLoopbackNIC" variant of CreateNIC and all the plumbing to connect it through to where the value is read in FindRoute. PiperOrigin-RevId: 288713093
2020-01-07Support deprecating SLAAC addresses after the preferred lifetimeGhanan Gowripalan
Support deprecating network endpoints on a NIC. If an endpoint is deprecated, it should not be used for new connections unless a more preferred endpoint is not available, or unless the deprecated endpoint was explicitly requested. Test: Test that deprecated endpoints are only returned when more preferred endpoints are not available and SLAAC addresses are deprecated after its preferred lifetime PiperOrigin-RevId: 288562705
2020-01-07Disable auto-generation of IPv6 link-local addresses for loopback NICsGhanan Gowripalan
Test: Test that an IPv6 link-local address is not auto-generated for loopback NICs, even when it is enabled for non-loopback NICS. PiperOrigin-RevId: 288519591
2020-01-06Pass the NIC-internal name to the NIC name function when generating opaque IIDsGhanan Gowripalan
Pass the NIC-internal name to the NIC name function when generating opaque IIDs so implementations can use the name that was provided when the NIC was created. Previously, explicit NICID to NIC name resolution was required from the netstack integrator. Tests: Test that the name provided when creating a NIC is passed to the NIC name function when generating opaque IIDs. PiperOrigin-RevId: 288395359
2020-01-03Support generating opaque interface identifiers as defined by RFC 7217Ghanan Gowripalan
Support generating opaque interface identifiers as defined by RFC 7217 for auto-generated IPv6 link-local addresses. Opaque interface identifiers will also be used for IPv6 addresses auto-generated via SLAAC in a later change. Note, this change does not handle retries in response to DAD conflicts yet. That will also come in a later change. Tests: Test that when configured to generated opaque IIDs, they are properly generated as outlined by RFC 7217. PiperOrigin-RevId: 288035349
2019-12-26Automated rollback of changelist 287029703gVisor bot
PiperOrigin-RevId: 287217899
2019-12-24Enable IP_RECVTOS socket option for datagram socketsRyan Heacock
Added the ability to get/set the IP_RECVTOS socket option on UDP endpoints. If enabled, TOS from the incoming Network Header passed as ancillary data in the ControlMessages. Test: * Added unit test to udp_test.go that tests getting/setting as well as verifying that we receive expected TOS from incoming packet. * Added a syscall test PiperOrigin-RevId: 287029703
2019-12-23Clear any host-specific NDP state when becoming a routerGhanan Gowripalan
This change supports clearing all host-only NDP state when NICs become routers. All discovered routers, discovered on-link prefixes and auto-generated addresses will be invalidated when becoming a router. This is because normally, routers do not process Router Advertisements to discover routers or on-link prefixes, and do not do SLAAC. Tests: Unittest to make sure that all discovered routers, discovered prefixes and auto-generated addresses get invalidated when transitioning from a host to a router. PiperOrigin-RevId: 286902309
2019-12-06Do IPv6 Stateless Address Auto-Configuration (SLAAC)Ghanan Gowripalan
This change allows the netstack to do SLAAC as outlined by RFC 4862 section 5.5. Note, this change will not break existing uses of netstack as the default configuration for the stack options is set in such a way that SLAAC will not be performed. See `stack.Options` and `stack.NDPConfigurations` for more details. This change reuses 1 option and introduces a new one that is required to take advantage of SLAAC, all available under NDPConfigurations: - HandleRAs: Whether or not NDP RAs are processes - AutoGenGlobalAddresses: Whether or not SLAAC is performed. Also note, this change does not deprecate SLAAC generated addresses after the preferred lifetime. That will come in a later change (b/143713887). Currently, only the valid lifetime is honoured. Tests: Unittest to make sure that SLAAC generates and adds addresses only when configured to do so. Tests also makes sure that conflicts with static addresses do not modify the static address. PiperOrigin-RevId: 284265317
2019-11-14Use PacketBuffers for outgoing packets.Kevin Krakauer
PiperOrigin-RevId: 280455453
2019-11-12Discover on-link prefixes from Router Advertisements' Prefix Information optionsGhanan Gowripalan
This change allows the netstack to do NDP's Prefix Discovery as outlined by RFC 4861 section 6.3.4. If configured to do so, when a new on-link prefix is discovered, the routing table will be updated with a device route through the nic the RA arrived at. Likewise, when such a prefix gets invalidated, the device route will be removed. Note, this change will not break existing uses of netstack as the default configuration for the stack options is set in such a way that Prefix Discovery will not be performed. See `stack.Options` and `stack.NDPConfigurations` for more details. This change reuses 1 option and introduces a new one that is required to take advantage of Prefix Discovery, all available under NDPConfigurations: - HandleRAs: Whether or not NDP RAs are processes - DiscoverOnLinkPrefixes: Whether or not Prefix Discovery is performed (new) Another note: for a NIC to process Prefix Information options (in Router Advertisements), it must not be a router itself. Currently the netstack does not have per-interface routing configuration; the routing/forwarding configuration is controlled stack-wide. Therefore, if the stack is configured to enable forwarding/routing, no router Advertisements (and by extension the Prefix Information options) will be processed. Tests: Unittest to make sure that Prefix Discovery and updates to the routing table only occur if explicitly configured to do so. Unittest to make sure at max stack.MaxDiscoveredOnLinkPrefixes discovered on-link prefixes are remembered. PiperOrigin-RevId: 280049278
2019-11-06Use PacketBuffers, rather than VectorisedViews, in netstack.Kevin Krakauer
PacketBuffers are analogous to Linux's sk_buff. They hold all information about a packet, headers, and payload. This is important for: * iptables to access various headers of packets * Preventing the clutter of passing different net and link headers along with VectorisedViews to packet handling functions. This change only affects the incoming packet path, and a future change will change the outgoing path. Benchmark Regular PacketBufferPtr PacketBufferConcrete -------------------------------------------------------------------------------- BM_Recvmsg 400.715MB/s 373.676MB/s 396.276MB/s BM_Sendmsg 361.832MB/s 333.003MB/s 335.571MB/s BM_Recvfrom 453.336MB/s 393.321MB/s 381.650MB/s BM_Sendto 378.052MB/s 372.134MB/s 341.342MB/s BM_SendmsgTCP/0/1k 353.711MB/s 316.216MB/s 322.747MB/s BM_SendmsgTCP/0/2k 600.681MB/s 588.776MB/s 565.050MB/s BM_SendmsgTCP/0/4k 995.301MB/s 888.808MB/s 941.888MB/s BM_SendmsgTCP/0/8k 1.517GB/s 1.274GB/s 1.345GB/s BM_SendmsgTCP/0/16k 1.872GB/s 1.586GB/s 1.698GB/s BM_SendmsgTCP/0/32k 1.017GB/s 1.020GB/s 1.133GB/s BM_SendmsgTCP/0/64k 475.626MB/s 584.587MB/s 627.027MB/s BM_SendmsgTCP/0/128k 416.371MB/s 503.434MB/s 409.850MB/s BM_SendmsgTCP/0/256k 323.449MB/s 449.599MB/s 388.852MB/s BM_SendmsgTCP/0/512k 243.992MB/s 267.676MB/s 314.474MB/s BM_SendmsgTCP/0/1M 95.138MB/s 95.874MB/s 95.417MB/s BM_SendmsgTCP/0/2M 96.261MB/s 94.977MB/s 96.005MB/s BM_SendmsgTCP/0/4M 96.512MB/s 95.978MB/s 95.370MB/s BM_SendmsgTCP/0/8M 95.603MB/s 95.541MB/s 94.935MB/s BM_SendmsgTCP/0/16M 94.598MB/s 94.696MB/s 94.521MB/s BM_SendmsgTCP/0/32M 94.006MB/s 94.671MB/s 94.768MB/s BM_SendmsgTCP/0/64M 94.133MB/s 94.333MB/s 94.746MB/s BM_SendmsgTCP/0/128M 93.615MB/s 93.497MB/s 93.573MB/s BM_SendmsgTCP/0/256M 93.241MB/s 95.100MB/s 93.272MB/s BM_SendmsgTCP/1/1k 303.644MB/s 316.074MB/s 308.430MB/s BM_SendmsgTCP/1/2k 537.093MB/s 584.962MB/s 529.020MB/s BM_SendmsgTCP/1/4k 882.362MB/s 939.087MB/s 892.285MB/s BM_SendmsgTCP/1/8k 1.272GB/s 1.394GB/s 1.296GB/s BM_SendmsgTCP/1/16k 1.802GB/s 2.019GB/s 1.830GB/s BM_SendmsgTCP/1/32k 2.084GB/s 2.173GB/s 2.156GB/s BM_SendmsgTCP/1/64k 2.515GB/s 2.463GB/s 2.473GB/s BM_SendmsgTCP/1/128k 2.811GB/s 3.004GB/s 2.946GB/s BM_SendmsgTCP/1/256k 3.008GB/s 3.159GB/s 3.171GB/s BM_SendmsgTCP/1/512k 2.980GB/s 3.150GB/s 3.126GB/s BM_SendmsgTCP/1/1M 2.165GB/s 2.233GB/s 2.163GB/s BM_SendmsgTCP/1/2M 2.370GB/s 2.219GB/s 2.453GB/s BM_SendmsgTCP/1/4M 2.005GB/s 2.091GB/s 2.214GB/s BM_SendmsgTCP/1/8M 2.111GB/s 2.013GB/s 2.109GB/s BM_SendmsgTCP/1/16M 1.902GB/s 1.868GB/s 1.897GB/s BM_SendmsgTCP/1/32M 1.655GB/s 1.665GB/s 1.635GB/s BM_SendmsgTCP/1/64M 1.575GB/s 1.547GB/s 1.575GB/s BM_SendmsgTCP/1/128M 1.524GB/s 1.584GB/s 1.580GB/s BM_SendmsgTCP/1/256M 1.579GB/s 1.607GB/s 1.593GB/s PiperOrigin-RevId: 278940079
2019-11-06Validate incoming NDP Router Advertisements, as per RFC 4861 section 6.1.2Ghanan Gowripalan
This change validates incoming NDP Router Advertisements as per RFC 4861 section 6.1.2. It also includes the skeleton to handle Router Advertiements that arrive on some NIC. Tests: Unittest to make sure only valid NDP Router Advertisements are received/ not dropped. PiperOrigin-RevId: 278891972
2019-10-30Deep copy dispatcher views.Kevin Krakauer
When VectorisedViews were passed up the stack from packet_dispatchers, we were passing a sub-slice of the dispatcher's views fields. The dispatchers then immediately set those views to nil. This wasn't caught before because every implementer copied the data in these views before returning. PiperOrigin-RevId: 277615351
2019-10-28Use the user supplied TCP MSS when creating a new active socketGhanan Gowripalan
This change supports using a user supplied TCP MSS for new active TCP connections. Note, the user supplied MSS must be less than or equal to the maximum possible MSS for a TCP connection's route. If it is greater than the maximum possible MSS, the maximum possible MSS will be used as the connection's MSS instead. This change does not use this user supplied MSS for connections accepted from listening sockets - that will come in a later change. Test: Test that outgoing TCP SYN segments contain a TCP MSS option with the user supplied MSS if it is not greater than the maximum possible MSS for the route. PiperOrigin-RevId: 277185125
2019-10-24Use interface-specific NDP configurations instead of the stack-wide default.Ghanan Gowripalan
This change makes it so that NDP work is done using the per-interface NDP configurations instead of the stack-wide default NDP configurations to correctly implement RFC 4861 section 6.3.2 (note here, a host is a single NIC operating as a host device), and RFC 4862 section 5.1. Test: Test that we can set NDP configurations on a per-interface basis without affecting the configurations of other interfaces or the stack-wide default. Also make sure that after the configurations are updated, the updated configurations are used for NDP processes (e.g. Duplicate Address Detection). PiperOrigin-RevId: 276525661
2019-10-23Inform netstack integrator when Duplicate Address Detection completesGhanan Gowripalan
This change introduces a new interface, stack.NDPDispatcher. It can be implemented by the netstack integrator to receive NDP related events. As of this change, only DAD related events are supported. Tests: Existing tests were modified to use the NDPDispatcher's DAD events for DAD tests where it needed to wait for DAD completing (failing and resolving). PiperOrigin-RevId: 276338733
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 17:55:23 +0000