| Age | Commit message (Collapse) | Author |
|---|
|
The NetworkEndpoint does not need to be created for each address.
Most of the work the NetworkEndpoint does is address agnostic.
PiperOrigin-RevId: 326759605
|
|
Formerly, when a packet is constructed or parsed, all headers are set by the
client code. This almost always involved prepending to pk.Header buffer or
trimming pk.Data portion. This is known to prone to bugs, due to the complexity
and number of the invariants assumed across netstack to maintain.
In the new PacketHeader API, client will call Push()/Consume() method to
construct/parse an outgoing/incoming packet. All invariants, such as slicing
and trimming, are maintained by the API itself.
NewPacketBuffer() is introduced to create new PacketBuffer. Zero value is no
longer valid.
PacketBuffer now assumes the packet is a concatenation of following portions:
* LinkHeader
* NetworkHeader
* TransportHeader
* Data
Any of them could be empty, or zero-length.
PiperOrigin-RevId: 326507688
|
|
This change implements the Neighbor Unreachability Detection (NUD) state
machine, as per RFC 4861 [1]. The state machine operates on a single neighbor
in the local network. This requires the state machine to be implemented on each
entry of the neighbor table.
This change also adds, but does not expose, several APIs. The first API is for
performing basic operations on the neighbor table:
- Create a static entry
- List all entries
- Delete all entries
- Remove an entry by address
The second API is used for changing the NUD protocol constants on a per-NIC
basis to allow Neighbor Discovery to operate over links with widely varying
performance characteristics. See [RFC 4861 Section 10][2] for the list of
constants.
Finally, the last API is for allowing users to subscribe to NUD state changes.
See [RFC 4861 Appendix C][3] for the list of edges.
[1]: https://tools.ietf.org/html/rfc4861
[2]: https://tools.ietf.org/html/rfc4861#section-10
[3]: https://tools.ietf.org/html/rfc4861#appendix-C
Tests:
pkg/tcpip/stack:stack_test
- TestNeighborCacheAddStaticEntryThenOverflow
- TestNeighborCacheClear
- TestNeighborCacheClearThenOverflow
- TestNeighborCacheConcurrent
- TestNeighborCacheDuplicateStaticEntryWithDifferentLinkAddress
- TestNeighborCacheDuplicateStaticEntryWithSameLinkAddress
- TestNeighborCacheEntry
- TestNeighborCacheEntryNoLinkAddress
- TestNeighborCacheGetConfig
- TestNeighborCacheKeepFrequentlyUsed
- TestNeighborCacheNotifiesWaker
- TestNeighborCacheOverflow
- TestNeighborCacheOverwriteWithStaticEntryThenOverflow
- TestNeighborCacheRemoveEntry
- TestNeighborCacheRemoveEntryThenOverflow
- TestNeighborCacheRemoveStaticEntry
- TestNeighborCacheRemoveStaticEntryThenOverflow
- TestNeighborCacheRemoveWaker
- TestNeighborCacheReplace
- TestNeighborCacheResolutionFailed
- TestNeighborCacheResolutionTimeout
- TestNeighborCacheSetConfig
- TestNeighborCacheStaticResolution
- TestEntryAddsAndClearsWakers
- TestEntryDelayToProbe
- TestEntryDelayToReachableWhenSolicitedOverrideConfirmation
- TestEntryDelayToReachableWhenUpperLevelConfirmation
- TestEntryDelayToStaleWhenConfirmationWithDifferentAddress
- TestEntryDelayToStaleWhenProbeWithDifferentAddress
- TestEntryFailedGetsDeleted
- TestEntryIncompleteToFailed
- TestEntryIncompleteToIncompleteDoesNotChangeUpdatedAt
- TestEntryIncompleteToReachable
- TestEntryIncompleteToReachableWithRouterFlag
- TestEntryIncompleteToStale
- TestEntryInitiallyUnknown
- TestEntryProbeToFailed
- TestEntryProbeToReachableWhenSolicitedConfirmationWithSameAddress
- TestEntryProbeToReachableWhenSolicitedOverrideConfirmation
- TestEntryProbeToStaleWhenConfirmationWithDifferentAddress
- TestEntryProbeToStaleWhenProbeWithDifferentAddress
- TestEntryReachableToStaleWhenConfirmationWithDifferentAddress
- TestEntryReachableToStaleWhenConfirmationWithDifferentAddressAndOverride
- TestEntryReachableToStaleWhenProbeWithDifferentAddress
- TestEntryReachableToStaleWhenTimeout
- TestEntryStaleToDelay
- TestEntryStaleToReachableWhenSolicitedOverrideConfirmation
- TestEntryStaleToStaleWhenOverrideConfirmation
- TestEntryStaleToStaleWhenProbeUpdateAddress
- TestEntryStaysDelayWhenOverrideConfirmationWithSameAddress
- TestEntryStaysProbeWhenOverrideConfirmationWithSameAddress
- TestEntryStaysReachableWhenConfirmationWithRouterFlag
- TestEntryStaysReachableWhenProbeWithSameAddress
- TestEntryStaysStaleWhenProbeWithSameAddress
- TestEntryUnknownToIncomplete
- TestEntryUnknownToStale
- TestEntryUnknownToUnknownWhenConfirmationWithUnknownAddress
pkg/tcpip/stack:stack_x_test
- TestDefaultNUDConfigurations
- TestNUDConfigurationFailsForNotSupported
- TestNUDConfigurationsBaseReachableTime
- TestNUDConfigurationsDelayFirstProbeTime
- TestNUDConfigurationsMaxMulticastProbes
- TestNUDConfigurationsMaxRandomFactor
- TestNUDConfigurationsMaxUnicastProbes
- TestNUDConfigurationsMinRandomFactor
- TestNUDConfigurationsRetransmitTimer
- TestNUDConfigurationsUnreachableTime
- TestNUDStateReachableTime
- TestNUDStateRecomputeReachableTime
- TestSetNUDConfigurationFailsForBadNICID
- TestSetNUDConfigurationFailsForNotSupported
[1]: https://tools.ietf.org/html/rfc4861
[2]: https://tools.ietf.org/html/rfc4861#section-10
[3]: https://tools.ietf.org/html/rfc4861#appendix-C
Updates #1889
Updates #1894
Updates #1895
Updates #1947
Updates #1948
Updates #1949
Updates #1950
PiperOrigin-RevId: 324070795
|
|
Changes the API of tcpip.Clock to also provide a method for scheduling and
rescheduling work after a specified duration. This change also implements the
AfterFunc method for existing implementations of tcpip.Clock.
This is the groundwork required to mock time within tests. All references to
CancellableTimer has been replaced with the tcpip.Job interface, allowing for
custom implementations of scheduling work.
This is a BREAKING CHANGE for clients that implement their own tcpip.Clock or
use tcpip.CancellableTimer. Migration plan:
1. Add AfterFunc(d, f) to tcpip.Clock
2. Replace references of tcpip.CancellableTimer with tcpip.Job
3. Replace calls to tcpip.CancellableTimer#StopLocked with tcpip.Job#Cancel
4. Replace calls to tcpip.CancellableTimer#Reset with tcpip.Job#Schedule
5. Replace calls to tcpip.NewCancellableTimer with tcpip.NewJob.
PiperOrigin-RevId: 322906897
|
|
NDP packets are sent periodically from NDP timers. These timers do not
hold the NIC lock when sending packets as the packet write operation
may take some time. While the lock is not held, the NIC may be removed
by some other goroutine. This change handles that scenario gracefully.
Test: stack_test.TestRemoveNICWhileHandlingRSTimer
PiperOrigin-RevId: 315524143
|
|
Historically we've been passing PacketBuffer by shallow copying through out
the stack. Right now, this is only correct as the caller would not use
PacketBuffer after passing into the next layer in netstack.
With new buffer management effort in gVisor/netstack, PacketBuffer will
own a Buffer (to be added). Internally, both PacketBuffer and Buffer may
have pointers and shallow copying shouldn't be used.
Updates #2404.
PiperOrigin-RevId: 314610879
|
|
Do not assume that networks need any DHCPv6 configurations. Instead,
notify the NDP dispatcher in response to the first NDP RA's DHCPv6
flags, even if the flags indicate no DHCPv6 configurations are
available.
PiperOrigin-RevId: 310245068
|
|
If the NIC already has a generated SLAAC address, regenerate a new SLAAC
address until one is generated that does not conflict with the NIC's
existing addresses, up to a maximum of 10 attempts.
This applies to both stable and temporary SLAAC addresses.
Test: stack_test.TestMixedSLAACAddrConflictRegen
PiperOrigin-RevId: 309495628
|
|
Support generating temporary (short-lived) IPv6 SLAAC addresses to
address privacy concerns outlined in RFC 4941.
Tests:
- stack_test.TestAutoGenTempAddr
- stack_test.TestNoAutoGenTempAddrForLinkLocal
- stack_test.TestAutoGenTempAddrRegen
- stack_test.TestAutoGenTempAddrRegenTimerUpdates
- stack_test.TestNoAutoGenTempAddrWithoutStableAddr
- stack_test.TestAutoGenAddrInResponseToDADConflicts
PiperOrigin-RevId: 308915566
|
|
A CancellableTimer's AfterFunc timer instance creates a closure over the
CancellableTimer's address. This closure makes a CancellableTimer unsafe
to copy.
No behaviour change, existing tests pass.
PiperOrigin-RevId: 308306664
|
|
Inform the netstack integrator when the netstack receives an NDP Router
Advertisement message with the NDP DNS Search List option with at least
one domain name. The stack will not maintain any state related to the
search list - the integrator is expected to maintain any required state
and invalidate domain names after their lifetime expires, or refresh the
lifetime when a new one is received for a known domain name.
Test:
- header_test.TestNDPDNSSearchListOption
- header_test.TestNDPDNSSearchListOptionSerialize
- header_test.TestNDPSearchListOptionDomainNameLabelInvalidSymbols
- header_test.TestNDPOptionsIterCheck
- stack_test.TestNDPDNSSearchListDispatch
PiperOrigin-RevId: 307109375
|
|
Test: header_test.TestNDPOptionsIterCheck
PiperOrigin-RevId: 306953867
|
|
As per RFC 7217 section 6, attempt to regenerate IPv6 SLAAC address in response
to a DAD conflict if the address was generated with an opaque IID as outlined in
RFC 7217 section 5.
Test:
- stack_test.TestAutoGenAddrWithOpaqueIIDDADRetries
- stack_test.TestAutoGenAddrWithEUI64IIDNoDADRetries
- stack_test.TestAutoGenAddrContinuesLifetimesAfterRetry
PiperOrigin-RevId: 306555645
|
|
PiperOrigin-RevId: 303212189
|
|
This is a precursor to be being able to build an intrusive list
of PacketBuffers for use in queuing disciplines being implemented.
Updates #2214
PiperOrigin-RevId: 302677662
|
|
Previously, SLAAC related state was stored on a per-address basis. This was
sufficient for the simple case of a single SLAAC address per prefix, but
future CLs will introduce temporary addresses which will result in multiple
SLAAC addresses for a prefix. This refactor allows storing multiple addresses
for a prefix in a single SLAAC prefix state.
No behaviour changes - existing tests continue to pass.
PiperOrigin-RevId: 300832812
|
|
If the NIC has a valid IPv6 address assigned, use it as the
source address for outgoing NDP Router Solicitation packets.
Test: stack_test.TestRouterSolicitation
PiperOrigin-RevId: 299398763
|
|
Test: stack_test.TestRouterSolicitation
PiperOrigin-RevId: 296454766
|
|
- Disabled NICs will have their associated NDP state cleared.
- Disabled NICs will not accept incoming packets.
- Writes through a Route with a disabled NIC will return an invalid
endpoint state error.
- stack.Stack.FindRoute will not return a route with a disabled NIC.
- NIC's Running flag will report the NIC's enabled status.
Tests:
- stack_test.TestDisableUnknownNIC
- stack_test.TestDisabledNICsNICInfoAndCheckNIC
- stack_test.TestRoutesWithDisabledNIC
- stack_test.TestRouteWritePacketWithDisabledNIC
- stack_test.TestStopStartSolicitingRouters
- stack_test.TestCleanupNDPState
- stack_test.TestAddRemoveIPv4BroadcastAddressOnNICEnableDisable
- stack_test.TestJoinLeaveAllNodesMulticastOnNICEnableDisable
PiperOrigin-RevId: 296298588
|
|
Previously, a DAD event would not be sent if DAD was disabled.
This allows integrators to do some work when an IPv6 address is bound to
a NIC without special logic that checks if DAD is enabled.
Without this change, integrators would need to check if a NIC has DAD
enabled when an address is auto-generated. If DAD is enabled, it would
need to delay the work until the DAD completion event; otherwise, it
would need to do the work in the address auto-generated event handler.
Test: stack_test.TestDADDisabled
PiperOrigin-RevId: 293732914
|
|
Auto-generated link-local addresses should have the same lifecycle hooks
as global SLAAC addresses.
The Stack's NDP dispatcher should be notified when link-local addresses
are auto-generated and invalidated. They should also be removed when a
NIC is disabled (which will be supported in a later change).
Tests:
- stack_test.TestNICAutoGenAddrWithOpaque
- stack_test.TestNICAutoGenAddr
PiperOrigin-RevId: 293706760
|
|
As per RFC 2464 section 7, an IPv6 packet with a multicast destination
address is transmitted to the mapped Ethernet multicast address.
Test:
- ipv6.TestLinkResolution
- stack_test.TestDADResolve
- stack_test.TestRouterSolicitation
PiperOrigin-RevId: 292610529
|
|
When sending NDP messages with an unspecified source address, the Source
Link Layer address must not be included.
Test: stack_test.TestDADResolve
PiperOrigin-RevId: 292341334
|
|
Do not start a new goroutine when calling
stack.NDPDispatcher.OnDuplicateAddressDetectionStatus.
PiperOrigin-RevId: 292268574
|
|
Test: stack_test.TestDADResolve
PiperOrigin-RevId: 292003124
|
|
- Wrap NIC's fields that should only be accessed while holding the mutex in
an anonymous struct with the embedded mutex.
- Make sure NIC's spoofing and promiscuous mode flags are only read while
holding the NIC's mutex.
- Use the correct endpoint when sending DAD messages.
- Do not hold the NIC's lock when sending DAD messages.
This change does not introduce any behaviour changes.
Tests: Existing tests continue to pass.
PiperOrigin-RevId: 291036251
|
|
It was possible to use this function incorrectly, and its separation
wasn't buying us anything.
PiperOrigin-RevId: 290311100
|
|
If a previously added IPv6 address (statically or via SLAAC) was removed, it
would be left in an expired state waiting to be cleaned up if any references to
it were still held. During this time, the same address could be regenerated via
SLAAC, which should be allowed. This change supports this scenario.
When upgrading an endpoint from temporary or permanentExpired to permanent,
respect the new configuration type (static or SLAAC) and deprecated status,
along with the new PrimaryEndpointBehavior (which was already supported).
Test: stack.TestAutoGenAddrAfterRemoval
PiperOrigin-RevId: 289990168
|
|
This change adds support to send NDP Router Solicitation messages when a NIC
becomes enabled as a host, as per RFC 4861 section 6.3.7.
Note, Router Solicitations will only be sent when the stack has forwarding
disabled.
Tests: Unittests to make sure that the initial Router Solicitations are sent
as configured. The tests also validate the sent Router Solicitations' fields.
PiperOrigin-RevId: 289964095
|
|
Inform the Stack's NDPDispatcher when it receives an NDP Router Advertisement
that updates the available configurations via DHCPv6. The Stack makes sure that
its NDPDispatcher isn't informed unless the avaiable configurations via DHCPv6
for a NIC is updated.
Tests: Test that a Stack's NDPDispatcher is informed when it receives an NDP
Router Advertisement that informs it of new configurations available via DHCPv6.
PiperOrigin-RevId: 289001283
|
|
Add a new CancellableTimer type to encapsulate the work of safely stopping
timers when it fires at the same time some "related work" is being handled. The
term "related work" is some work that needs to be done while having obtained
some common lock (L).
Example: Say we have an invalidation timer that may be extended or cancelled by
some event. Creating a normal timer and simply cancelling may not be sufficient
as the timer may have already fired when the event handler attemps to cancel it.
Even if the timer and event handler obtains L before doing work, once the event
handler releases L, the timer will eventually obtain L and do some unwanted
work.
To prevent the timer from doing unwanted work, it checks if it should early
return instead of doing the normal work after obtaining L. When stopping the
timer callers must have L locked so the timer can be safely informed that it
should early return.
Test: Tests that CancellableTimer fires and resets properly. Test to make sure
the timer fn is not called after being stopped within the lock L.
PiperOrigin-RevId: 288806984
|
|
Support deprecating network endpoints on a NIC. If an endpoint is deprecated, it
should not be used for new connections unless a more preferred endpoint is not
available, or unless the deprecated endpoint was explicitly requested.
Test: Test that deprecated endpoints are only returned when more preferred
endpoints are not available and SLAAC addresses are deprecated after its
preferred lifetime
PiperOrigin-RevId: 288562705
|
|
Pass the NIC-internal name to the NIC name function when generating opaque IIDs
so implementations can use the name that was provided when the NIC was created.
Previously, explicit NICID to NIC name resolution was required from the netstack
integrator.
Tests: Test that the name provided when creating a NIC is passed to the NIC name
function when generating opaque IIDs.
PiperOrigin-RevId: 288395359
|
|
Support using opaque interface identifiers when generating IPv6 addresses via
SLAAC when configured to do so.
Note, this change does not handle retries in response to DAD conflicts yet.
That will also come in a later change.
Test: Test that when SLAAC addresses are generated, they use opaque interface
identifiers when configured to do so.
PiperOrigin-RevId: 288078605
|
|
This change supports clearing all host-only NDP state when NICs become routers.
All discovered routers, discovered on-link prefixes and auto-generated addresses
will be invalidated when becoming a router. This is because normally, routers do
not process Router Advertisements to discover routers or on-link prefixes, and
do not do SLAAC.
Tests: Unittest to make sure that all discovered routers, discovered prefixes
and auto-generated addresses get invalidated when transitioning from a host to
a router.
PiperOrigin-RevId: 286902309
|
|
This change removes the requirement that a new routing table be provided when a
router or prefix discovery event happens so that an updated routing table may
be provided to the stack at a later time from the event.
This change is to address the use case where the netstack integrator may need to
obtain a lock before providing updated routes in response to the events above.
As an example, say we have an integrator that performs the below two operations
operations as described:
A. Normal route update:
1. Obtain integrator lock
2. Update routes in the integrator
3. Call Stack.SetRouteTable with the updated routes
3.1. Obtain Stack lock
3.2. Update routes in Stack
3.3. Release Stack lock
4. Release integrator lock
B. NDP event triggered route update:
1. Obtain Stack lock
2. Call event handler
2.1. Obtain integrator lock
2.2. Update routes in the integrator
2.3. Release integrator lock
2.4. Return updated routes to update Stack
3. Update routes in Stack
4. Release Stack lock
A deadlock may occur if a Normal route update was attemped at the same time an
NDP event triggered route update was attempted. With threads T1 and T2:
1) T1 -> A.1, A.2
2) T2 -> B.1
3) T1 -> A.3 (hangs at A.3.1 since Stack lock is taken in step 2)
4) T2 -> B.2 (hangs at B.2.1 since integrator lock is taken in step 1)
Test: Existing tests were modified to not provide or expect routing table
changes in response to Router and Prefix discovery events.
PiperOrigin-RevId: 286274712
|
|
Fixed a bug where the interface identifier was not properly generated from an
Ethernet address.
Tests: Unittests to make sure the functions generating the EUI64 interface
identifier are correct.
PiperOrigin-RevId: 285494562
|
|
This change adds support to let an integrator know when it receives an NDP
Router Advertisement message with the NDP Recursive DNS Server option with at
least one DNS server's address. The stack will not maintain any state related to
the DNS servers - the integrator is expected to maintain any required state and
invalidate the servers after its valid lifetime expires, or refresh the lifetime
when a new one is received for a known DNS server.
Test: Unittest to make sure that an event is sent to the integrator when an NDP
Recursive DNS Server option is received with at least one address.
PiperOrigin-RevId: 284890502
|
|
This change allows the netstack to do SLAAC as outlined by RFC 4862 section 5.5.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that SLAAC
will not be performed. See `stack.Options` and `stack.NDPConfigurations` for
more details.
This change reuses 1 option and introduces a new one that is required to take
advantage of SLAAC, all available under NDPConfigurations:
- HandleRAs: Whether or not NDP RAs are processes
- AutoGenGlobalAddresses: Whether or not SLAAC is performed.
Also note, this change does not deprecate SLAAC generated addresses after the
preferred lifetime. That will come in a later change (b/143713887). Currently,
only the valid lifetime is honoured.
Tests: Unittest to make sure that SLAAC generates and adds addresses only when
configured to do so. Tests also makes sure that conflicts with static addresses
do not modify the static address.
PiperOrigin-RevId: 284265317
|
|
This change adds a type to represent the NDP Recursive DNS Server option, as
defined by RFC 8106 section 5.1.
PiperOrigin-RevId: 284005493
|
|
PiperOrigin-RevId: 280455453
|
|
This change allows the netstack to do NDP's Prefix Discovery as outlined by
RFC 4861 section 6.3.4. If configured to do so, when a new on-link prefix is
discovered, the routing table will be updated with a device route through
the nic the RA arrived at. Likewise, when such a prefix gets invalidated, the
device route will be removed.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that Prefix Discovery
will not be performed. See `stack.Options` and `stack.NDPConfigurations` for
more details.
This change reuses 1 option and introduces a new one that is required to take
advantage of Prefix Discovery, all available under NDPConfigurations:
- HandleRAs: Whether or not NDP RAs are processes
- DiscoverOnLinkPrefixes: Whether or not Prefix Discovery is performed (new)
Another note: for a NIC to process Prefix Information options (in Router
Advertisements), it must not be a router itself. Currently the netstack does not
have per-interface routing configuration; the routing/forwarding configuration
is controlled stack-wide. Therefore, if the stack is configured to enable
forwarding/routing, no router Advertisements (and by extension the Prefix
Information options) will be processed.
Tests: Unittest to make sure that Prefix Discovery and updates to the routing
table only occur if explicitly configured to do so. Unittest to make sure at
max stack.MaxDiscoveredOnLinkPrefixes discovered on-link prefixes are
remembered.
PiperOrigin-RevId: 280049278
|
|
https://github.com/golang/go/wiki/CodeReviewComments#initialisms
This change does not introduce any new functionality. It just renames variables
from `nicid` to `nicID`.
PiperOrigin-RevId: 278992966
|
|
This change allows the netstack to do NDP's Router Discovery as outlined by
RFC 4861 section 6.3.4.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that Router Discovery
will not be performed. See `stack.Options` and `stack.NDPConfigurations` for
more details.
This change introduces 2 options required to take advantage of Router Discovery,
all available under NDPConfigurations:
- HandleRAs: Whether or not NDP RAs are processes
- DiscoverDefaultRouters: Whether or not Router Discovery is performed
Another note: for a NIC to process Router Advertisements, it must not be a
router itself. Currently the netstack does not have per-interface routing
configuration; the routing/forwarding configuration is controlled stack-wide.
Therefore, if the stack is configured to enable forwarding/routing, no Router
Advertisements will be processed.
Tests: Unittest to make sure that Router Discovery and updates to the routing
table only occur if explicitly configured to do so. Unittest to make sure at
max stack.MaxDiscoveredDefaultRouters discovered default routers are remembered.
PiperOrigin-RevId: 278965143
|
|
This change validates incoming NDP Router Advertisements as per RFC 4861 section
6.1.2. It also includes the skeleton to handle Router Advertiements that arrive
on some NIC.
Tests: Unittest to make sure only valid NDP Router Advertisements are received/
not dropped.
PiperOrigin-RevId: 278891972
|
|
This change makes it so that NDP work is done using the per-interface NDP
configurations instead of the stack-wide default NDP configurations to correctly
implement RFC 4861 section 6.3.2 (note here, a host is a single NIC operating
as a host device), and RFC 4862 section 5.1.
Test: Test that we can set NDP configurations on a per-interface basis without
affecting the configurations of other interfaces or the stack-wide default. Also
make sure that after the configurations are updated, the updated configurations
are used for NDP processes (e.g. Duplicate Address Detection).
PiperOrigin-RevId: 276525661
|
|
This change introduces a new interface, stack.NDPDispatcher. It can be
implemented by the netstack integrator to receive NDP related events. As of this
change, only DAD related events are supported.
Tests: Existing tests were modified to use the NDPDispatcher's DAD events for
DAD tests where it needed to wait for DAD completing (failing and resolving).
PiperOrigin-RevId: 276338733
|
|
NDP Neighbor Solicitations sent during Duplicate Address Detection must have an
IP hop limit of 255, as all NDP Neighbor Solicitations should have.
Test: Test that DAD messages have the IPv6 hop limit field set to 255.
PiperOrigin-RevId: 275321680
|
|
This change adds support for Duplicate Address Detection on IPv6 addresses
as defined by RFC 4862 section 5.4.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that DAD will not be
performed. See `stack.Options` and `stack.NDPConfigurations` for more details.
Tests: Tests to make sure that the DAD process properly resolves or fails.
That is, tests make sure that DAD resolves only if:
- No other node is performing DAD for the same address
- No other node owns the same address
PiperOrigin-RevId: 275189471
|
