| Age | Commit message (Collapse) | Author |
|---|
|
The NIC structure is not to be used outside of the stack package
directly.
PiperOrigin-RevId: 356036737
|
|
This stores each protocol's neighbor state separately.
This change also removes the need for each neighbor entry to keep
track of their own link address resolver now that all the entries
in a cache will use the same resolver.
PiperOrigin-RevId: 354818155
|
|
The network endpoint should not need to have logic to handle different
kinds of neighbor tables. Network endpoints can let the NIC know about
differnt neighbor discovery messages and let the NIC decide which table
to update.
This allows us to remove the LinkAddressCache interface.
PiperOrigin-RevId: 354812584
|
|
This removes the need to provide the link address request with the NIC
the request is being performed on since the NetworkEndpoints already
have a reference to the NIC.
PiperOrigin-RevId: 354721940
|
|
Avoid a race condition in which an entry is acquired while it is being
evicted by overlapping the entry lock with the cache lock.
PiperOrigin-RevId: 354452639
|
|
This makes it possible to add data to types that implement tcpip.Error.
ErrBadLinkEndpoint is removed as it is unused.
PiperOrigin-RevId: 354437314
|
|
This clarifies that there is a lock involved.
PiperOrigin-RevId: 354213848
|
|
Fixes #5150.
PiperOrigin-RevId: 354194385
|
|
GetLinkAddress's callback will be called immediately with a
stack.LinkResolutionResult which will hold the link address
so no need to also return the link address from the function.
Fixes #5151.
PiperOrigin-RevId: 353157857
|
|
...unless explicitly requested via ResolveWith.
Remove cancelled channels from pending packets as we can use the link
resolution channel in a FIFO to limit the number of maximum pending
resolutions we should queue packets for.
This change also defers starting the goroutine that handles link
resolution completion to when link resolution succeeds, fails or
gets cancelled due to the max number of pending resolutions being
reached.
Fixes #751.
PiperOrigin-RevId: 353130577
|
|
Link addresses are cached on a per NIC basis so instead of having a
single cache that includes the NIC ID for neighbor entry lookups,
use a single cache per NIC.
PiperOrigin-RevId: 352684111
|
|
If a Route is being created through a link that requires link address
resolution and a remote address that has a known mapping to a link
address, populate the link address when the route is created.
This removes the need for neighbor/link address caches to perform this
check.
Fixes #5149
PiperOrigin-RevId: 352122401
|
|
Removes the period of time in which subseqeuent traffic to a Failed neighbor
immediately fails with ErrNoLinkAddress. A Failed neighbor is one in which
address resolution fails; or in other words, the neighbor's IP address cannot
be translated to a MAC address.
This means removing the Failed state for linkAddrCache and allowing transitiong
out of Failed into Incomplete for neighborCache. Previously, both caches would
transition entries to Failed after address resolution fails. In this state, any
subsequent traffic requested within an unreachable time would immediately fail
with ErrNoLinkAddress. This does not follow RFC 4861 section 7.3.3:
If address resolution fails, the entry SHOULD be deleted, so that subsequent
traffic to that neighbor invokes the next-hop determination procedure again.
Invoking next-hop determination at this point ensures that alternate default
routers are tried.
The API for getting a link address for a given address, whether through the link
address cache or the neighbor table, is updated to optionally take a callback
which will be called when address resolution completes. This allows `Route` to
handle completing link resolution internally, so callers of (*Route).Resolve
(e.g. endpoints) don’t have to keep track of when it completes and update the
Route accordingly.
This change also removes the wakers from LinkAddressCache, NeighborCache, and
Route in favor of the callbacks, and callers that previously used a waker can
now just pass a callback to (*Route).Resolve that will notify the waker on
resolution completion.
Fixes #4796
Startblock:
has LGTM from sbalana
and then
add reviewer ghanan
PiperOrigin-RevId: 348597478
|
|
Previously a link endpoint was passed to
stack.LinkAddressResolver.LinkAddressRequest. With this change,
implementations that want a route for the link address request may
find one through the stack. Other implementations that want to send
a packet without a route may continue to do so using the network
interface directly.
Test: - arp_test.TestLinkAddressRequest
- ipv6.TestLinkAddressRequest
PiperOrigin-RevId: 338577474
|
|
The previous implementation of LinkAddressRequest only supported sending
broadcast ARP requests and multicast Neighbor Solicitations. The ability to
send these packets as unicast is required for Neighbor Unreachability
Detection.
Tests:
pkg/tcpip/network/arp:arp_test
- TestLinkAddressRequest
pkg/tcpip/network/ipv6:ipv6_test
- TestLinkAddressRequest
Updates #1889
Updates #1894
Updates #1895
Updates #1947
Updates #1948
Updates #1949
Updates #1950
PiperOrigin-RevId: 323451569
|
|
* Rename syncutil to sync.
* Add aliases to sync types.
* Replace existing usage of standard library sync package.
This will make it easier to swap out synchronization primitives. For example,
this will allow us to use primitives from github.com/sasha-s/go-deadlock to
check for lock ordering violations.
Updates #1472
PiperOrigin-RevId: 289033387
|
|
This allows the stack to learn remote link addresses on incoming
packets, reducing the need to ARP to send responses.
This also reduces the number of round trips to the system clock,
since that may also prove to be performance-sensitive.
Fixes #739.
PiperOrigin-RevId: 265815816
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
These wakers are uselessly allocated and passed around; nothing ever
listens for notifications on them. The code here appears to be
vestigial, so removing it and allowing a nil waker to be passed seems
appropriate.
PiperOrigin-RevId: 249879320
Change-Id: Icd209fb77cc0dd4e5c49d7a9f2adc32bf88b4b71
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|
|
The channels {cancel,resCh} have roughly the same lifetime and are used for
roughly the same purpose as an entry's waiters; we can unify the state
management of the two mechanisms, while also reducing unncessary mutex locking
and unlocking.
Made some cosmetic changes while I'm here.
PiperOrigin-RevId: 218343915
Change-Id: Ic69546a2b7b390162b2231f07f335dd6199472d7
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
Previously, if address resolution for UDP or Ping sockets required sending
packets using Write in Transport layer, Resolve would return ErrWouldBlock
and Write would return ErrNoLinkAddress. Meanwhile startAddressResolution
would run in background. Further calls to Write using same address would also
return ErrNoLinkAddress until resolution has been completed successfully.
Since Write is not allowed to block and System Calls need to be
interruptible in System Call layer, the caller to Write is responsible for
blocking upon return of ErrWouldBlock.
Now, when startAddressResolution is called a notification channel for
the completion of the address resolution is returned.
The channel will traverse up to the calling function of Write as well as
ErrNoLinkAddress. Once address resolution is complete (success or not) the
channel is closed. The caller would call Write again to send packets and
check if address resolution was compeleted successfully or not.
Fixes google/gvisor#5
Change-Id: Idafaf31982bee1915ca084da39ae7bd468cebd93
PiperOrigin-RevId: 214962200
|
|
PiperOrigin-RevId: 204930314
Change-Id: Ifc4c41ed28616cd57fafbf7c92e87141a945c41f
|
|
Fixes #27
PiperOrigin-RevId: 203825288
Change-Id: Ie9f3a2b2c1e296b026b024f75c07da1a7e118633
|
|
PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
|
