Age | Commit message (Collapse) | Author |
|
Connection tracking is used to track packets in prerouting and
output hooks of iptables. The NAT rules modify the tuples in
connections. The connection tracking code modifies the packets by
looking at the modified tuples.
|
|
Software GSO implementation currently has a complicated code path with
implicit assumptions that all packets to WritePackets carry same Data
and it does this to avoid allocations on the path etc. But this makes it
hard to reuse the WritePackets API.
This change breaks all such assumptions by introducing a new Vectorised
View API ReadToVV which can be used to cleanly split a VV into multiple
independent VVs. Further this change also makes packet buffers linkable
to form an intrusive list. This allows us to get rid of the array of
packet buffers that are passed in the WritePackets API call and replace
it with a list of packet buffers.
While this code does introduce some more allocations in the benchmarks
it doesn't cause any degradation.
Updates #231
PiperOrigin-RevId: 304731742
|
|
This allows the link layer endpoints to consistenly hash a TCP
segment to a single underlying queue in case a link layer endpoint
does support multiple underlying queues.
Updates #231
PiperOrigin-RevId: 302760664
|
|
This is a precursor to be being able to build an intrusive list
of PacketBuffers for use in queuing disciplines being implemented.
Updates #2214
PiperOrigin-RevId: 302677662
|
|
Fixes #1510
Test:
- stack_test.TestForwardingWithStaticResolver
- stack_test.TestForwardingWithFakeResolver
- stack_test.TestForwardingWithNoResolver
- stack_test.TestForwardingWithFakeResolverPartialTimeout
- stack_test.TestForwardingWithFakeResolverTwoPackets
- stack_test.TestForwardingWithFakeResolverManyPackets
- stack_test.TestForwardingWithFakeResolverManyResolutions
PiperOrigin-RevId: 300182570
|
|
Useful for logs to print the string representation of the value
instead of the integer value.
PiperOrigin-RevId: 299356847
|
|
Addresses may be added before a NIC is enabled. Make sure DAD is
performed on the permanent IPv6 addresses when they get enabled.
Test:
- stack_test.TestDoDADWhenNICEnabled
- stack.TestDisabledRxStatsWhenNICDisabled
PiperOrigin-RevId: 293697429
|
|
PiperOrigin-RevId: 291745021
|
|
This change adds support to send NDP Router Solicitation messages when a NIC
becomes enabled as a host, as per RFC 4861 section 6.3.7.
Note, Router Solicitations will only be sent when the stack has forwarding
disabled.
Tests: Unittests to make sure that the initial Router Solicitations are sent
as configured. The tests also validate the sent Router Solicitations' fields.
PiperOrigin-RevId: 289964095
|
|
PiperOrigin-RevId: 289169518
|
|
* Rename syncutil to sync.
* Add aliases to sync types.
* Replace existing usage of standard library sync package.
This will make it easier to swap out synchronization primitives. For example,
this will allow us to use primitives from github.com/sasha-s/go-deadlock to
check for lock ordering violations.
Updates #1472
PiperOrigin-RevId: 289033387
|
|
Internal tools timeout after 60s during tests that are required to pass before
changes can be submitted. Separate out NDP tests into its own package to help
prevent timeouts when testing.
PiperOrigin-RevId: 288990597
|
|
Support generating opaque interface identifiers as defined by RFC 7217 for
auto-generated IPv6 link-local addresses. Opaque interface identifiers will also
be used for IPv6 addresses auto-generated via SLAAC in a later change.
Note, this change does not handle retries in response to DAD conflicts yet.
That will also come in a later change.
Tests: Test that when configured to generated opaque IIDs, they are properly
generated as outlined by RFC 7217.
PiperOrigin-RevId: 288035349
|
|
PiperOrigin-RevId: 282194656
|
|
This change makes sure that when an address which is already known by a NIC and
has kind = permanentExpired gets promoted to permanent, the new
PrimaryEndpointBehavior is respected.
PiperOrigin-RevId: 276136317
|
|
This change adds support for Duplicate Address Detection on IPv6 addresses
as defined by RFC 4862 section 5.4.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that DAD will not be
performed. See `stack.Options` and `stack.NDPConfigurations` for more details.
Tests: Tests to make sure that the DAD process properly resolves or fails.
That is, tests make sure that DAD resolves only if:
- No other node is performing DAD for the same address
- No other node owns the same address
PiperOrigin-RevId: 275189471
|
|
PiperOrigin-RevId: 274672346
|
|
Netstack always picks a random start point everytime PickEphemeralPort
is called. While this is required for UDP so that DNS requests go
out through a randomized set of ports it is not required for TCP. Infact
Linux explicitly hashes the (srcip, dstip, dstport) and a one time secret
initialized at start of the application to get a random offset. But to
ensure it doesn't start from the same point on every scan it uses a static
hint that is incremented by 2 in every call to pick ephemeral ports.
The reason for 2 is Linux seems to split the port ranges where active connects
seem to use even ones while odd ones are used by listening sockets.
This CL implements a similar strategy where we use a hash + hint to generate
the offset to start the search for a free Ephemeral port.
This ensures that we cycle through the available port space in order for
repeated connects to the same destination and significantly reduces the
chance of picking a recently released port.
PiperOrigin-RevId: 272058370
|
|
PiperOrigin-RevId: 271644926
|
|
They are no-ops, so the standard rule works fine.
PiperOrigin-RevId: 268776264
|
|
Adds support to generate Port Unreachable messages for UDP
datagrams received on a port for which there is no valid
endpoint.
Fixes #703
PiperOrigin-RevId: 267034418
|
|
PiperOrigin-RevId: 266000128
|
|
This allows the stack to learn remote link addresses on incoming
packets, reducing the need to ARP to send responses.
This also reduces the number of round trips to the system clock,
since that may also prove to be performance-sensitive.
Fixes #739.
PiperOrigin-RevId: 265815816
|
|
PiperOrigin-RevId: 261413396
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
|
|
Also adds a test for regular NIC forwarding.
PiperOrigin-RevId: 231495279
Change-Id: Ic7edec249568e9ad0280cea77eac14478c9073e1
|
|
This option allows multiple sockets to be bound to the same port.
Incoming packets are distributed to sockets using a hash based on source and
destination addresses. This means that all packets from one sender will be
received by the same server socket.
PiperOrigin-RevId: 227153413
Change-Id: I59b6edda9c2209d5b8968671e9129adb675920cf
|
|
Currently sending a broadcast packet (for DHCP, e.g.) requires a "default
route" of the format "0.0.0.0/0 via 0.0.0.0 <intf>". There is no good reason
for this and on devices with several ports this creates a rather akward route
table with lots of such default routes (which defeats the purpose of a default
route).
PiperOrigin-RevId: 224378769
Change-Id: Icd7ec8a206eb08083cff9a837f6f9ab231c73a19
|
|
We have been unnecessarily creating too many savable types implicitly.
PiperOrigin-RevId: 206334201
Change-Id: Idc5a3a14bfb7ee125c4f2bb2b1c53164e46f29a8
|
|
Fixes #27
PiperOrigin-RevId: 203825288
Change-Id: Ie9f3a2b2c1e296b026b024f75c07da1a7e118633
|
|
PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
|