Age | Commit message (Collapse) | Author |
|
Send buffer size in TCP indicates the amount of bytes available for the sender
to transmit. This change will allow TCP to update the send buffer size when
- TCP enters established state.
- ACK is received.
The auto tuning is disabled when the send buffer size is set with the
SO_SNDBUF option.
PiperOrigin-RevId: 390312274
|
|
PiperOrigin-RevId: 389035388
|
|
TCP is fully supported. As with SO_RCVBUF, other transport protocols perform
no-ops per DefaultSocketOptionsHandler.OnSetReceiveBufferSize.
PiperOrigin-RevId: 385023239
|
|
Previously, two calls to set the send or receive buffer size could have raced
and left state wherein:
- The actual size depended on one call
- The value returned by getsockopt() depended on the other
PiperOrigin-RevId: 384508720
|
|
- Keeps Linux-specific behavior out of //pkg/tcpip
- Makes it clearer that clamping is done only for setsockopt calls from users
- Removes code duplication
PiperOrigin-RevId: 384389809
|
|
Adds support for the SO_BINDTODEVICE socket option in ICMP sockets with an
accompanying packetimpact test to exercise use of this socket option.
Adds a unit test to exercise the NIC selection logic introduced by this change.
The remaining unit tests for ICMP sockets need to be added in a subsequent CL.
See https://gvisor.dev/issues/5623 for the list of remaining unit tests.
Adds a "timeout" field to PacketimpactTestInfo, necessary due to the long
runtime of the newly added packetimpact test.
Fixes #5678
Fixes #4896
Updates #5623
Updates #5681
Updates #5763
Updates #5956
Updates #5966
Updates #5967
PiperOrigin-RevId: 376271581
|
|
|
|
|
|
|
|
Fixes #2926, #674
PiperOrigin-RevId: 369457123
|
|
The limits for snd/rcv buffers for unix domain socket is controlled by the
following sysctls on linux
- net.core.rmem_default
- net.core.rmem_max
- net.core.wmem_default
- net.core.wmem_max
Today in gVisor we do not expose these sysctls but we do support setting the
equivalent in netstack via stack.Options() method. But AF_UNIX sockets in gVisor
can be used without netstack, with hostinet or even without any networking stack
at all. Which means ideally these sysctls need to live as globals in gVisor.
But rather than make this a big change for now we hardcode the limits in the
AF_UNIX implementation itself (which in itself is better than where we were
before) where it SO_SNDBUF was hardcoded to 16KiB. Further we bump the initial
limit to a default value of 208 KiB to match linux from the paltry 16 KiB we use
today.
Updates #5132
PiperOrigin-RevId: 356665498
|
|
...to remove the need for the transport layer to deduce the type of
error it received.
Rename HandleControlPacket to HandleError as HandleControlPacket only
handles errors.
tcpip.SockError now holds a tcpip.SockErrorCause interface that
different errors can implement.
PiperOrigin-RevId: 354994306
|
|
This makes it possible to add data to types that implement tcpip.Error.
ErrBadLinkEndpoint is removed as it is unused.
PiperOrigin-RevId: 354437314
|
|
- This CL will initialize the function handler used for getting the send
buffer size limits during endpoint creation and does not require the caller of
SetSendBufferSize(..) to know the endpoint type(tcp/udp/..)
PiperOrigin-RevId: 353992634
|
|
This CL moves {S,G}etsockopt of SO_SNDBUF from all endpoints to socketops. For
unix sockets, we do not support setting of this option.
PiperOrigin-RevId: 353871484
|
|
PiperOrigin-RevId: 348696094
|
|
PiperOrigin-RevId: 348055514
|
|
Introduces the per-socket error queue and the necessary cmsg mechanisms.
PiperOrigin-RevId: 348028508
|
|
PiperOrigin-RevId: 347437786
|
|
SO_OOBINLINE option is set/get as boolean value, which is the same as linux.
As we currently do not support disabling this option, we always return it as
true.
PiperOrigin-RevId: 347413905
|
|
Fixes #5004
PiperOrigin-RevId: 346643745
|
|
Ports the following options:
- TCP_NODELAY
- TCP_CORK
- TCP_QUICKACK
Also deletes the {Get/Set}SockOptBool interface methods from all implementations
PiperOrigin-RevId: 344378824
|
|
We will use SocketOptions for all kinds of options, not just SOL_SOCKET options
because (1) it is consistent with Linux which defines all option variables on
the top level socket struct, (2) avoid code complexity. Appropriate checks
have been added for matching option level to the endpoint type.
Ported the following options to this new utility:
- IP_MULTICAST_LOOP
- IP_RECVTOS
- IPV6_RECVTCLASS
- IP_PKTINFO
- IP_HDRINCL
- IPV6_V6ONLY
Changes in behavior (these are consistent with what Linux does AFAICT):
- Now IP_MULTICAST_LOOP can be set for TCP (earlier it was a noop) but does not
affect the endpoint itself.
- We can now getsockopt IP_HDRINCL (earlier we would get an error).
- Now we return ErrUnknownProtocolOption if SOL_IP or SOL_IPV6 options are used
on unix sockets.
- Now we return ErrUnknownProtocolOption if SOL_IPV6 options are used on non
AF_INET6 endpoints.
This change additionally makes the following modifications:
- Add State() uint32 to commonEndpoint because both tcpip.Endpoint and
transport.Endpoint interfaces have it. It proves to be quite useful.
- Gets rid of SocketOptionsHandler.IsListening(). It was an anomaly as it was
not a handler. It is now implemented on netstack itself.
- Gets rid of tcp.endpoint.EndpointInfo and directly embeds
stack.TransportEndpointInfo. There was an unnecessary level of embedding
which served no purpose.
- Removes some checks dual_stack_test.go that used the errors from
GetSockOptBool(tcpip.V6OnlyOption) to confirm some state. This is not
consistent with the new design and also seemed to be testing the
implementation instead of behavior.
PiperOrigin-RevId: 344354051
|
|
PiperOrigin-RevId: 343217712
|
|
This changes also introduces:
- `SocketOptionsHandler` interface which can be implemented by endpoints to
handle endpoint specific behavior on SetSockOpt. This is analogous to what
Linux does.
- `DefaultSocketOptionsHandler` which is a default implementation of the above.
This is embedded in all endpoints so that we don't have to uselessly
implement empty functions. Endpoints with specific behavior can override the
embedded method by manually defining its own implementation.
PiperOrigin-RevId: 343158301
|
|
PiperOrigin-RevId: 343146856
|
|
This change also makes the following fixes:
- Make SocketOptions use atomic operations instead of having to acquire/drop
locks upon each get/set option.
- Make documentation more consistent.
- Remove tcpip.SocketOptions from socketOpsCommon because it already exists
in transport.Endpoint.
- Refactors get/set socket options tests to be easily extendable.
PiperOrigin-RevId: 343103780
|
|
Store all the socket level options in a struct and call {Get/Set}SockOpt on
this struct. This will avoid implementing socket level options on all
endpoints. This CL contains implementing one socket level option for tcp and
udp endpoints.
PiperOrigin-RevId: 342203981
|