summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/network
AgeCommit message (Collapse)Author
2020-09-13Merge release-20200907.0-38-gb6ca96b9b (automated)gVisor bot
2020-09-12Cap reassembled IPv6 packets at 65535 octetsToshi Kikuchi
IPv4 can accept 65536-octet reassembled packets. Test: - ipv4_test.TestInvalidFragments - ipv4_test.TestReceiveFragments - ipv6.TestInvalidIPv6Fragments - ipv6.TestReceiveIPv6Fragments Fixes #3770 PiperOrigin-RevId: 331382977
2020-08-28Merge release-20200818.0-83-gbdd5996a7 (automated)gVisor bot
2020-08-28Improve type safety for network protocol optionsGhanan Gowripalan
The existing implementation for NetworkProtocol.{Set}Option take arguments of an empty interface type which all types (implicitly) implement; any type may be passed to the functions. This change introduces marker interfaces for network protocol options that may be set or queried which network protocol option types implement to ensure that invalid types are caught at compile time. Different interfaces are used to allow the compiler to enforce read-only or set-only socket options. PiperOrigin-RevId: 328980359
2020-08-25Merge release-20200818.0-43-ga174aa759 (automated)gVisor bot
2020-08-25Add option to replace linkAddrCache with neighborCacheSam Balana
This change adds an option to replace the current implementation of ARP through linkAddrCache, with an implementation of NUD through neighborCache. Switching to using NUD for both ARP and NDP is beneficial for the reasons described by RFC 4861 Section 3.1: "[Using NUD] significantly improves the robustness of packet delivery in the presence of failing routers, partially failing or partitioned links, or nodes that change their link-layer addresses. For instance, mobile nodes can move off-link without losing any connectivity due to stale ARP caches." "Unlike ARP, Neighbor Unreachability Detection detects half-link failures and avoids sending traffic to neighbors with which two-way connectivity is absent." Along with these changes exposes the API for querying and operating the neighbor cache. Operations include: - Create a static entry - List all entries - Delete all entries - Remove an entry by address This also exposes the API to change the NUD protocol constants on a per-NIC basis to allow Neighbor Discovery to operate over links with widely varying performance characteristics. See [RFC 4861 Section 10][1] for the list of constants. Finally, an API for subscribing to NUD state changes is exposed through NUDDispatcher. See [RFC 4861 Appendix C][3] for the list of edges. Tests: pkg/tcpip/network/arp:arp_test + TestDirectRequest pkg/tcpip/network/ipv6:ipv6_test + TestLinkResolution + TestNDPValidation + TestNeighorAdvertisementWithTargetLinkLayerOption + TestNeighorSolicitationResponse + TestNeighorSolicitationWithSourceLinkLayerOption + TestRouterAdvertValidation pkg/tcpip/stack:stack_test + TestCacheWaker + TestForwardingWithFakeResolver + TestForwardingWithFakeResolverManyPackets + TestForwardingWithFakeResolverManyResolutions + TestForwardingWithFakeResolverPartialTimeout + TestForwardingWithFakeResolverTwoPackets + TestIPv6SourceAddressSelectionScopeAndSameAddress [1]: https://tools.ietf.org/html/rfc4861#section-10 [2]: https://tools.ietf.org/html/rfc4861#appendix-C Fixes #1889 Fixes #1894 Fixes #1895 Fixes #1947 Fixes #1948 Fixes #1949 Fixes #1950 PiperOrigin-RevId: 328365034
2020-08-20Merge release-20200810.0-72-g7ca62b9da (automated)gVisor bot
2020-08-20Only use the NextHeader value of the first IPv6 fragment extension header.Arthur Sfez
As per RFC 8200 Section 4.5: The Next Header field of the last header of the Per-Fragment headers is obtained from the Next Header field of the first fragment's Fragment header. Test: - pkg/tcpip/network/ipv6:ipv6_test - pkg/tcpip/network/ipv4:ipv4_test - pkg/tcpip/network/fragmentation:fragmentation_test Updates #2197 PiperOrigin-RevId: 327671635
2020-08-17Add a unit test for out of order IP reassemblyArthur Sfez
PiperOrigin-RevId: 327042869
2020-08-15Merge release-20200810.0-35-g1736b2208 (automated)gVisor bot
2020-08-14Use a single NetworkEndpoint per NIC per protocolGhanan Gowripalan
The NetworkEndpoint does not need to be created for each address. Most of the work the NetworkEndpoint does is address agnostic. PiperOrigin-RevId: 326759605
2020-08-14Give the ICMP Code its own typeJulian Elischer
This is a preparatory commit for a larger commit working on ICMP generation in error cases. This is removal of technical debt and cleanup in the gvisor code as part of gvisor issue 2211. Updates #2211. PiperOrigin-RevId: 326615389
2020-08-13Merge release-20200810.0-23-g47515f475 (automated)gVisor bot
2020-08-13Migrate to PacketHeader API for PacketBuffer.Ting-Yu Wang
Formerly, when a packet is constructed or parsed, all headers are set by the client code. This almost always involved prepending to pk.Header buffer or trimming pk.Data portion. This is known to prone to bugs, due to the complexity and number of the invariants assumed across netstack to maintain. In the new PacketHeader API, client will call Push()/Consume() method to construct/parse an outgoing/incoming packet. All invariants, such as slicing and trimming, are maintained by the API itself. NewPacketBuffer() is introduced to create new PacketBuffer. Zero value is no longer valid. PacketBuffer now assumes the packet is a concatenation of following portions: * LinkHeader * NetworkHeader * TransportHeader * Data Any of them could be empty, or zero-length. PiperOrigin-RevId: 326507688
2020-08-11Merge release-20200804.0-61-g8e31f0dc5 (automated)gVisor bot
2020-08-10Set the NetworkProtocolNumber of all PacketBuffers.Kevin Krakauer
NetworkEndpoints set the number on outgoing packets in Write() and NetworkProtocols set them on incoming packets in Parse(). Needed for #3549. PiperOrigin-RevId: 325938745
2020-08-09Merge release-20200804.0-54-gb404b5c25 (automated)gVisor bot
2020-08-08Use unicast source for ICMP echo repliesGhanan Gowripalan
Packets MUST NOT use a non-unicast source address for ICMP Echo Replies. Test: integration_test.TestPingMulticastBroadcast PiperOrigin-RevId: 325634380
2020-08-04Merge release-20200622.1-329-g00993130e (automated)gVisor bot
2020-08-04Use 1 fragmentation component per IP stackGhanan Gowripalan
This will help manage memory consumption by IP reassembly when receiving IP fragments on multiple network endpoints. Previously, each endpoint would cap memory consumption at 4MB, but with this change, each IP stack will cap memory consumption at 4MB. No behaviour changes. PiperOrigin-RevId: 324913904
2020-07-31Merge release-20200622.1-300-ga7d9aa6d5 (automated)gVisor bot
2020-07-31Support fragments from different sourcesGhanan Gowripalan
Prevent fragments with different source-destination pairs from conflicting with each other. Test: - ipv6_test.TestReceiveIPv6Fragments - ipv4_test.TestReceiveIPv6Fragments PiperOrigin-RevId: 324283246
2020-07-30Enforce fragment block size and validate argsGhanan Gowripalan
Allow configuring fragmentation.Fragmentation with a fragment block size which will be enforced when processing fragments. Also validate arguments when processing fragments. Test: - fragmentation.TestErrors - ipv6_test.TestReceiveIPv6Fragments - ipv4_test.TestReceiveIPv6Fragments PiperOrigin-RevId: 324081521
2020-07-27Merge release-20200622.1-240-g8dbf428a1 (automated)gVisor bot
2020-07-27Add ability to send unicast ARP requests and Neighbor SolicitationsSam Balana
The previous implementation of LinkAddressRequest only supported sending broadcast ARP requests and multicast Neighbor Solicitations. The ability to send these packets as unicast is required for Neighbor Unreachability Detection. Tests: pkg/tcpip/network/arp:arp_test - TestLinkAddressRequest pkg/tcpip/network/ipv6:ipv6_test - TestLinkAddressRequest Updates #1889 Updates #1894 Updates #1895 Updates #1947 Updates #1948 Updates #1949 Updates #1950 PiperOrigin-RevId: 323451569
2020-07-23Merge release-20200622.1-198-gfc26b3764 (automated)gVisor bot
2020-07-22make connect(2) fail when dest is unreachableKevin Krakauer
Previously, ICMP destination unreachable datagrams were ignored by TCP endpoints. This caused connect to hang when an intermediate router couldn't find a route to the host. This manifested as a Kokoro error when Docker IPv6 was enabled. The Ruby image test would try to install the sinatra gem and hang indefinitely attempting to use an IPv6 address. Fixes #3079.
2020-07-22Support for receiving outbound packets in AF_PACKET.Bhasker Hariharan
Updates #173 PiperOrigin-RevId: 322665518
2020-07-16Merge release-20200622.1-171-gc66991ad7 (automated)gVisor bot
2020-07-16Add ethernet broadcast address constantGhanan Gowripalan
PiperOrigin-RevId: 321620517
2020-07-15Fix minor bugs in a couple of interface IOCTLs.Bhasker Hariharan
gVisor incorrectly returns the wrong ARP type for SIOGIFHWADDR. This breaks tcpdump as it tries to interpret the packets incorrectly. Similarly, SIOCETHTOOL is used by tcpdump to query interface properties which fails with an EINVAL since we don't implement it. For now change it to return EOPNOTSUPP to indicate that we don't support the query rather than return EINVAL. NOTE: ARPHRD types for link endpoints are distinct from NIC capabilities and NIC flags. In Linux all 3 exist eg. ARPHRD types are stored in dev->type field while NIC capabilities are more like the device features which can be queried using SIOCETHTOOL but not modified and NIC Flags are fields that can be modified from user space. eg. NIC status (UP/DOWN/MULTICAST/BROADCAST) etc. Updates #2746 PiperOrigin-RevId: 321436525
2020-07-13Merge pull request #2672 from amscanne:shim-integratedgVisor bot
PiperOrigin-RevId: 321053634
2020-07-07Merge release-20200622.1-76-g76c7bc51b (automated)gVisor bot
2020-07-07Set IPv4 ID on all non-atomic datagramsTony Gong
RFC 6864 imposes various restrictions on the uniqueness of the IPv4 Identification field for non-atomic datagrams, defined as an IP datagram that either can be fragmented (DF=0) or is already a fragment (MF=1 or positive fragment offset). In order to be compliant, the ID field is assigned for all non-atomic datagrams. Add a TCP unit test that induces retransmissions and checks that the IPv4 ID field is unique every time. Add basic handling of the IP_MTU_DISCOVER socket option so that the option can be used to disable PMTU discovery, effectively setting DF=0. Attempting to set the sockopt to anything other than disabled will fail because PMTU discovery is currently not implemented, and the default behavior matches that of disabled. PiperOrigin-RevId: 320081842
2020-06-24Merge release-20200608.0-119-g364ac92ba (automated)gVisor bot
2020-06-07Merge release-20200522.0-94-g32b823fc (automated)gVisor bot
2020-06-07netstack: parse incoming packet headers up-frontKevin Krakauer
Netstack has traditionally parsed headers on-demand as a packet moves up the stack. This is conceptually simple and convenient, but incompatible with iptables, where headers can be inspected and mangled before even a routing decision is made. This changes header parsing to happen early in the incoming packet path, as soon as the NIC gets the packet from a link endpoint. Even if an invalid packet is found (e.g. a TCP header of insufficient length), the packet is passed up the stack for proper stats bookkeeping. PiperOrigin-RevId: 315179302
2020-06-06Merge release-20200522.0-91-g427d2082 (automated)gVisor bot
2020-06-05iptables: loopback traffic skips prerouting chainKevin Krakauer
Loopback traffic is not affected by rules in the PREROUTING chain. This change is also necessary for istio's envoy to talk to other components in the same pod.
2020-06-03Merge release-20200522.0-72-gd3a8bffe (automated)gVisor bot
2020-06-03Pass PacketBuffer as pointer.Ting-Yu Wang
Historically we've been passing PacketBuffer by shallow copying through out the stack. Right now, this is only correct as the caller would not use PacketBuffer after passing into the next layer in netstack. With new buffer management effort in gVisor/netstack, PacketBuffer will own a Buffer (to be added). Internally, both PacketBuffer and Buffer may have pointers and shallow copying shouldn't be used. Updates #2404. PiperOrigin-RevId: 314610879
2020-05-27Merge release-20200518.0-45-g0bc022b7 (automated)gVisor bot
2020-05-08Merge release-20200422.0-61-gcfd3066 (automated)gVisor bot
2020-05-08iptables - filter packets using outgoing interface.gVisor bot
Enables commands with -o (--out-interface) for iptables rules. $ iptables -A OUTPUT -o eth0 -j ACCEPT PiperOrigin-RevId: 310642286
2020-05-06Add basic incoming ipv4 fragment testsKevin Krakauer
Based on ipv6's TestReceiveIPv6Fragments.
2020-05-04Merge release-20200422.0-18-g711439b (automated)gVisor bot
2020-05-01Support for connection tracking of TCP packets.Nayana Bidari
Connection tracking is used to track packets in prerouting and output hooks of iptables. The NAT rules modify the tuples in connections. The connection tracking code modifies the packets by looking at the modified tuples.
2020-05-01Merge release-20200422.0-11-g5e1e61f (automated)gVisor bot
2020-05-01Automated rollback of changelist 308674219Kevin Krakauer
PiperOrigin-RevId: 309491861
2020-04-30Merge release-20200422.0-7-gae15d90 (automated)gVisor bot
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 01:29:04 +0000