summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/network
AgeCommit message (Collapse)Author
2021-01-23Merge release-20210112.0-78-g18ebec0ec (automated)gVisor bot
2021-01-23Merge release-20210112.0-77-g76da673a0 (automated)gVisor bot
2021-01-22Refactor GetMainNICAddressArthur Sfez
It previously returned an error but it could only be UnknownNICID. It now returns a boolean to indicate whether the nic exists or not. PiperOrigin-RevId: 353337489
2021-01-22Do not modify IGMP packets when verifying checksumGhanan Gowripalan
PiperOrigin-RevId: 353336894
2021-01-22Define tcpip.Payloader in terms of io.ReaderTamir Duberstein
Fixes #1509. PiperOrigin-RevId: 353295589
2021-01-22Merge release-20210112.0-66-gcfbf20917 (automated)gVisor bot
2021-01-21iptables: support matching the input interface nameToshi Kikuchi
We have support for the output interface name, but not for the input interface name. This change adds the support for the input interface name, and adds the test cases for it. Fixes #5300 PiperOrigin-RevId: 353179389
2021-01-21Only use callback for GetLinkAddressGhanan Gowripalan
GetLinkAddress's callback will be called immediately with a stack.LinkResolutionResult which will hold the link address so no need to also return the link address from the function. Fixes #5151. PiperOrigin-RevId: 353157857
2021-01-20Merge release-20210112.0-48-g286516640 (automated)gVisor bot
2021-01-20Change the way the IP options report problemsJulian Elischer
The error messages are not needed or used as these are not processing errors so much as errors to be reported back to the packet sender. Implicitly describe whether each error should generate ICMP packets or not. Most do but there are a couple that do not. Slightly alter some test expectations for Linux compatibility and add a couple more. Improve Linux compatibility on error packet returns. Some cosmetic changes to tests to match the upcoming packet impact version of the same tests. PiperOrigin-RevId: 352889785
2021-01-20Merge release-20210112.0-47-g7ff5ceaea (automated)gVisor bot
2021-01-19Do not have a stack-wide linkAddressCacheGhanan Gowripalan
Link addresses are cached on a per NIC basis so instead of having a single cache that includes the NIC ID for neighbor entry lookups, use a single cache per NIC. PiperOrigin-RevId: 352684111
2021-01-19Merge release-20210112.0-45-gbe17b9444 (automated)gVisor bot
2021-01-19Per NIC NetworkEndpoint statisticsArthur Sfez
To facilitate the debugging of multi-homed setup, track Network protocols statistics for each endpoint. Note that the original stack-wide stats still exist. A new type of statistic counter is introduced, which track two versions of a stat at the same time. This lets a network endpoint increment both the local stat and the stack-wide stat at the same time. Fixes #4605 PiperOrigin-RevId: 352663276
2021-01-19Merge release-20210112.0-43-ga2ec1932c (automated)gVisor bot
2021-01-19Drop CheckLocalAddress from LinkAddressCacheGhanan Gowripalan
PiperOrigin-RevId: 352623277
2021-01-15Only pass stack.Route's fields to LinkEndpointsGhanan Gowripalan
stack.Route is used to send network packets and resolve link addresses. A LinkEndpoint does not need to do either of these and only needs the route's fields at the time of the packet write request. Since LinkEndpoints only need the route's fields when writing packets, pass a stack.RouteInfo instead. PiperOrigin-RevId: 352108405
2021-01-15Remove count argument from tcpip.Endpoint.ReadTamir Duberstein
The same intent can be specified via the io.Writer. PiperOrigin-RevId: 352098747
2021-01-15Merge release-20210112.0-35-gec9e263f2 (automated)gVisor bot
2021-01-15Correctly return EMSGSIZE when packet is too big in raw socket.Ting-Yu Wang
IPv4 previously accepts the packet, while IPv6 panics. Neither is the behavior in Linux. splice() in Linux has different behavior than in gVisor. This change documents it in the SpliceTooLong test. Reported-by: syzbot+b550e78e5c24d1d521f2@syzkaller.appspotmail.com PiperOrigin-RevId: 352091286
2021-01-15Merge release-20210112.0-25-ge57ebcd37 (automated)gVisor bot
2021-01-14Add stats for ARPArthur Sfez
Fixes #4963 Startblock: has LGTM from sbalana and then add reviewer ghanan PiperOrigin-RevId: 351886320
2021-01-14Merge release-20201216.0-105-g25b5ec713 (automated)gVisor bot
2021-01-13Do not resolve remote link address at transport layerGhanan Gowripalan
Link address resolution is performed at the link layer (if required) so we can defer it from the transport layer. When link resolution is required, packets will be queued and sent once link resolution completes. If link resolution fails, the transport layer will receive a control message indicating that the stack failed to route the packet. tcpip.Endpoint.Write no longer returns a channel now that writes do not wait for link resolution at the transport layer. tcpip.ErrNoLinkAddress is no longer used so it is removed. Removed calls to stack.Route.ResolveWith from the transport layer so that link resolution is performed when a route is created in response to an incoming packet (e.g. to complete TCP handshakes or send a RST). Tests: - integration_test.TestForwarding - integration_test.TestTCPLinkResolutionFailure Fixes #4458 RELNOTES: n/a PiperOrigin-RevId: 351684158
2021-01-12Fix simple mistakes identified by goreportcard.Adin Scannell
These are primarily simplification and lint mistakes. However, minor fixes are also included and tests added where appropriate. PiperOrigin-RevId: 351425971
2021-01-11Merge release-20201216.0-82-g4c4de6644 (automated)gVisor bot
2021-01-07netstack: Refactor tcpip.Endpoint.ReadTing-Yu Wang
Read now takes a destination io.Writer, count, options. Keeping the method name Read, in contrast to the Write method. This enables: * direct transfer of views under VV * zero copy It also eliminates the need for sentry to keep a slice of view because userspace had requested a read that is smaller than the view returned, removing the complexity there. Read/Peek/ReadPacket are now consolidated together and some duplicate code is removed. PiperOrigin-RevId: 350636322
2020-12-28Merge release-20201208.0-89-g3ff7324df (automated)gVisor bot
2020-12-22Invoke address resolution upon subsequent traffic to Failed neighborPeter Johnston
Removes the period of time in which subseqeuent traffic to a Failed neighbor immediately fails with ErrNoLinkAddress. A Failed neighbor is one in which address resolution fails; or in other words, the neighbor's IP address cannot be translated to a MAC address. This means removing the Failed state for linkAddrCache and allowing transitiong out of Failed into Incomplete for neighborCache. Previously, both caches would transition entries to Failed after address resolution fails. In this state, any subsequent traffic requested within an unreachable time would immediately fail with ErrNoLinkAddress. This does not follow RFC 4861 section 7.3.3: If address resolution fails, the entry SHOULD be deleted, so that subsequent traffic to that neighbor invokes the next-hop determination procedure again. Invoking next-hop determination at this point ensures that alternate default routers are tried. The API for getting a link address for a given address, whether through the link address cache or the neighbor table, is updated to optionally take a callback which will be called when address resolution completes. This allows `Route` to handle completing link resolution internally, so callers of (*Route).Resolve (e.g. endpoints) don’t have to keep track of when it completes and update the Route accordingly. This change also removes the wakers from LinkAddressCache, NeighborCache, and Route in favor of the callbacks, and callers that previously used a waker can now just pass a callback to (*Route).Resolve that will notify the waker on resolution completion. Fixes #4796 Startblock: has LGTM from sbalana and then add reviewer ghanan PiperOrigin-RevId: 348597478
2020-12-21Prefer matching labels and longest matching prefixGhanan Gowripalan
...when performing source address selection for IPv6. These are defined in RFC 6724 section 5 rule 6 (prefer matching label) and rule 8 (use longest matching prefix). This change also considers ULA of global scope instead of its own scope, as per RFC 6724 section 3.1: Also, note that ULAs are considered as global, not site-local, scope but are handled via the prefix policy table as discussed in Section 10.6. Test: stack_test.TestIPv6SourceAddressSelectionScope Startblock: has LGTM from peterjohnston and then add reviewer brunodalbo PiperOrigin-RevId: 348580996
2020-12-16Cleanup locking in multicast group protocol testsGhanan Gowripalan
Startblock: has LGTM from asfez and then add reviewer tamird PiperOrigin-RevId: 347928471
2020-12-15Don't split enabled flag across multicast group stateGhanan Gowripalan
Startblock: has LGTM from asfez and then add reviewer brunodalbo PiperOrigin-RevId: 347716242
2020-12-12Merge release-20201208.0-40-g08d36b6c6 (automated)gVisor bot
2020-12-12Reduce the memory overhead in IP fragment managementToshi Kikuchi
- Deep-copy pkt.Data and hold it instead of shallow-copy (vv.Clone). This allows the pkt's backing array, which includes the header portion, to be freed. - Remove fragHeap. The fragments are now held in holes struct instead. - Stop reserving the initial capacity of holes slice. PiperOrigin-RevId: 347198744
2020-12-12Merge release-20201208.0-39-g4aef908c9 (automated)gVisor bot
2020-12-12Introduce IPv6 extension header serialization facilitiesBruno Dal Bo
Adds IPv6 extension header serializer and Hop by Hop options serializer. Add RouterAlert option serializer and use it in MLD. Fixed #4996 Startblock: has LGTM from marinaciocea and then add reviewer ghanan PiperOrigin-RevId: 347174537
2020-12-10Merge release-20201130.0-80-g53a95ad0d (automated)gVisor bot
2020-12-10Use specified source address for IGMP/MLD packetsGhanan Gowripalan
This change also considers interfaces and network endpoints enabled up up to the point all work to disable them are complete. This was needed so that protocols can perform shutdown work while being disabled (e.g. sending a packet which requires the endpoint to be enabled to obtain a source address). Bug #4682, #4861 Fixes #4888 Startblock: has LGTM from peterjohnston and then add reviewer brunodalbo PiperOrigin-RevId: 346869702
2020-12-10Merge release-20201130.0-69-g50189b0d6 (automated)gVisor bot
2020-12-09Do not perform IGMP/MLD on loopback interfacesGhanan Gowripalan
The loopback interface will never have any neighbouring nodes so advertising its interest in multicast groups is unnecessary. Bug #4682, #4861 Startblock: has LGTM from asfez and then add reviewer tamird PiperOrigin-RevId: 346587604
2020-12-09Merge release-20201130.0-65-g96d14de0f (automated)gVisor bot
2020-12-09export MountTempDirectoryZeling Feng
PiperOrigin-RevId: 346487763
2020-12-07Merge release-20201130.0-57-g0e5ba13b3 (automated)gVisor bot
2020-12-07Remove stale commentSam Balana
Removes comment lines about MaxUnsolicitedReportDelay. This is already documented in the comment for GenericMulticastProtocolOptions. PiperOrigin-RevId: 346185053
2020-12-05Merge release-20201130.0-46-gdf2dbe3e3 (automated)gVisor bot
2020-12-04Remove stack.ReadOnlyAddressableEndpointStateGhanan Gowripalan
Startblock: has LGTM from asfez and then add reviewer tamird PiperOrigin-RevId: 345815146
2020-12-04Merge release-20201130.0-39-gfd28ccfaa (automated)gVisor bot
2020-12-04Introduce IPv4 options serializer and add RouterAlert to IGMPBruno Dal Bo
PiperOrigin-RevId: 345701623
2020-12-03Make `stack.Route` thread safePeter Johnston
Currently we rely on the user to take the lock on the endpoint that owns the route, in order to modify it safely. We can instead move `Route.RemoteLinkAddress` under `Route`'s mutex, and allow non-locking and thread-safe access to other fields of `Route`. PiperOrigin-RevId: 345461586
2020-12-02Merge release-20201117.0-100-gbdaae08ee (automated)gVisor bot
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-12 15:40:13 +0000