summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/network
AgeCommit message (Collapse)Author
2019-10-15Merge release-20190806.1-272-gdb1ca5c (automated)gVisor bot
2019-10-15Set NDP hop limit in accordance with RFC 4861Tamir Duberstein
...and do not populate link address cache at dispatch. This partially reverts 313c767b0001bf6271405f1b765b60a334d6e911, which caused malformed packets (e.g. NDP Neighbor Adverts with incorrect hop limit values) to populate the address cache. In particular, this masked a bug that was introduced to the Neighbor Advert generation code in 7c1587e3401a010d1865df61dbaf117c77dd062e. PiperOrigin-RevId: 274865182
2019-10-15Merge release-20190806.1-270-gbfa0bb2 (automated)gVisor bot
2019-10-14Internal change.gVisor bot
PiperOrigin-RevId: 274700093
2019-10-14Reorder BUILD license and load functions in netstack.Kevin Krakauer
PiperOrigin-RevId: 274672346
2019-10-10Merge release-20190806.1-262-gc7e901f (automated)gVisor bot
2019-10-10Fix bugs in fragment handling.Bhasker Hariharan
Strengthen the header.IPv4.IsValid check to correctly check for IHL/TotalLength fields. Also add a check to make sure fragmentOffsets + size of the fragment do not cause a wrap around for the end of the fragment. PiperOrigin-RevId: 274049313
2019-10-08Merge release-20190806.1-247-g7c1587e (automated)gVisor bot
2019-10-07Implement IP_TTL.Ian Gudger
Also change the default TTL to 64 to match Linux. PiperOrigin-RevId: 273430341
2019-10-03Implement proper local broadcast behaviorChris Kuiper
The behavior for sending and receiving local broadcast (255.255.255.255) traffic is as follows: Outgoing -------- * A broadcast packet sent on a socket that is bound to an interface goes out that interface * A broadcast packet sent on an unbound socket follows the route table to select the outgoing interface + if an explicit route entry exists for 255.255.255.255/32, use that one + else use the default route * Broadcast packets are looped back and delivered following the rules for incoming packets (see next). This is the same behavior as for multicast packets, except that it cannot be disabled via sockopt. Incoming -------- * Sockets wishing to receive broadcast packets must bind to either INADDR_ANY (0.0.0.0) or INADDR_BROADCAST (255.255.255.255). No other socket receives broadcast packets. * Broadcast packets are multiplexed to all sockets matching it. This is the same behavior as for multicast packets. * A socket can bind to 255.255.255.255:<port> and then receive its own broadcast packets sent to 255.255.255.255:<port> In addition, this change implicitly fixes an issue with multicast reception. If two sockets want to receive a given multicast stream and one is bound to ANY while the other is bound to the multicast address, only one of them will receive the traffic. PiperOrigin-RevId: 272792377
2019-09-25Merge release-20190806.1-183-g59ccbb1 (automated)gVisor bot
2019-09-25Remove centralized registration of protocols.Kevin Krakauer
Also removes the need for protocol names. PiperOrigin-RevId: 271186030
2019-09-20Allow waiting for LinkEndpoint worker goroutines to finish.Ian Gudger
Previously, the only safe way to use an fdbased endpoint was to leak the FD. This change makes it possible to safely close the FD. This is the first step towards having stoppable stacks. Updates #837 PiperOrigin-RevId: 270346582
2019-09-17Automated rollback of changelist 268047073Ghanan Gowripalan
PiperOrigin-RevId: 269658971
2019-09-12Remove go_test from go_stateify and go_marshalMichael Pratt
They are no-ops, so the standard rule works fine. PiperOrigin-RevId: 268776264
2019-09-12Automated rollback of changelist 268047073Ghanan Gowripalan
PiperOrigin-RevId: 268757842
2019-09-09Join IPv6 all-nodes and solicited-node multicast addresses where appropriate.Ghanan Gowripalan
The IPv6 all-nodes multicast address will be joined on NIC enable, and the appropriate IPv6 solicited-node multicast address will be joined when IPv6 addresses are added. Tests: Test receiving packets destined to the IPv6 link-local all-nodes multicast address and the IPv6 solicted node address of an added IPv6 address. PiperOrigin-RevId: 268047073
2019-09-06Remove reundant global tcpip.LinkEndpointID.Ian Gudger
PiperOrigin-RevId: 267709597
2019-09-04Merge 144127e5 (automated)gVisor bot
2019-09-03Validate IPv6 Hop Limit field for received NDP packetsGhanan Gowripalan
Make sure that NDP packets are only received if their IP header's hop limit field is set to 255, as per RFC 4861. PiperOrigin-RevId: 267061457
2019-09-03Merge 3789c34b (automated)gVisor bot
2019-09-03Make UDP traceroute work.Bhasker Hariharan
Adds support to generate Port Unreachable messages for UDP datagrams received on a port for which there is no valid endpoint. Fixes #703 PiperOrigin-RevId: 267034418
2019-08-28Merge 313c767b (automated)gVisor bot
2019-08-27Populate link address cache at dispatchTamir Duberstein
This allows the stack to learn remote link addresses on incoming packets, reducing the need to ARP to send responses. This also reduces the number of round trips to the system clock, since that may also prove to be performance-sensitive. Fixes #739. PiperOrigin-RevId: 265815816
2019-08-21Use tcpip.Subnet in tcpip.RouteTamir Duberstein
This is the first step in replacing some of the redundant types with the standard library equivalents. PiperOrigin-RevId: 264706552
2019-08-07Merge 79cc4397 (automated)gVisor bot
2019-08-07Set target address in ARP ReplyTamir Duberstein
PiperOrigin-RevId: 262163794
2019-07-31Merge 12c4eb29 (automated)gVisor bot
2019-07-31Fix ICMPv4 EchoReply packet checksumAustin Kiekintveld
The checksum was not being reset before being re-calculated and sent out. This caused the sent checksum to always be `0x0800`. Fixes #605. PiperOrigin-RevId: 260965059
2019-07-24Merge 2ed832ff (automated)gVisor bot
2019-07-24Add support for a subnet prefix length on interface network addressesChris Kuiper
This allows the user code to add a network address with a subnet prefix length. The prefix length value is stored in the network endpoint and provided back to the user in the ProtocolAddress type. PiperOrigin-RevId: 259807693
2019-07-16Merge 74dc663b (automated)gVisor bot
2019-07-16Internal change.gVisor bot
PiperOrigin-RevId: 258424489
2019-07-13Merge 9b4d3280 (automated)gVisor bot
2019-07-12Add IPPROTO_RAW, which allows raw sockets to write IP headers.Kevin Krakauer
iptables also relies on IPPROTO_RAW in a way. It opens such a socket to manipulate the kernel's tables, but it doesn't actually use any of the functionality. Blegh. PiperOrigin-RevId: 257903078
2019-06-27Merge 5b41ba5d (automated)gVisor bot
2019-06-27Fix various spelling issues in the documentationMichael Pratt
Addresses obvious typos, in the documentation only. COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65 PiperOrigin-RevId: 255477779
2019-06-13Merge add40fd6 (automated)gVisor bot
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-10Merge a00157cc (automated)gVisor bot
2019-06-05Adjust route when looping multicast packetsChris Kuiper
Multicast packets are special in that their destination address does not identify a specific interface. When sending out such a packet the multicast address is the remote address, but for incoming packets it is the local address. Hence, when looping a multicast packet, the route needs to be tweaked to reflect this. PiperOrigin-RevId: 251739298
2019-06-02Merge 216da0b7 (automated)gVisor bot
2019-05-07Check GSO for nil in WritePacketGoogler
Testing: Unit tests added PiperOrigin-RevId: 247096269 Change-Id: I849c010eadcb53caf45896a15ef38162d66a9568
2019-05-05Fix raw socket behavior and tests.Kevin Krakauer
Some behavior was broken due to the difficulty of running automated raw socket tests. Change-Id: I152ca53916bb24a0208f2dc1c4f5bc87f4724ff6 PiperOrigin-RevId: 246747067
2019-05-03Support IPv4 fragmentation in netstackGoogler
Testing: Unit tests and also large ping in Fuchsia OS PiperOrigin-RevId: 246563592 Change-Id: Ia12ab619f64f4be2c8d346ce81341a91724aef95
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-04-29Allow and document bug ids in gVisor codebase.Nicolas Lacasse
PiperOrigin-RevId: 245818639 Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
2019-03-28Add ICMP statsBert Muthalaly
PiperOrigin-RevId: 240848882 Change-Id: I23dd4599f073263437aeab357c3f767e1a432b82
2019-03-28netstack/fdbased: add generic segmentation offload (GSO) supportAndrei Vagin
The linux packet socket can handle GSO packets, so we can segment packets to 64K instead of the MTU which is usually 1500. Here are numbers for the nginx-1m test: runsc: 579330.01 [Kbytes/sec] received runsc-gso: 1794121.66 [Kbytes/sec] received runc: 2122139.06 [Kbytes/sec] received and for tcp_benchmark: $ tcp_benchmark --duration 15 --ideal [ 4] 0.0-15.0 sec 86647 MBytes 48456 Mbits/sec $ tcp_benchmark --client --duration 15 --ideal [ 4] 0.0-15.0 sec 2173 MBytes 1214 Mbits/sec $ tcp_benchmark --client --duration 15 --ideal --gso 65536 [ 4] 0.0-15.0 sec 19357 MBytes 10825 Mbits/sec PiperOrigin-RevId: 240809103 Change-Id: I2637f104db28b5d4c64e1e766c610162a195775a
2019-03-27Avoid mutating memory passed to DeliverTransportPacketTamir Duberstein
PiperOrigin-RevId: 240642903 Change-Id: I16625015123a827d267d60b328a202057264bbd6
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 23:41:22 +0000