Age | Commit message (Collapse) | Author |
|
...instead of passing its fields piecemeal.
PiperOrigin-RevId: 339345899
|
|
Fixes #4427, #4428
PiperOrigin-RevId: 338805047
|
|
Previously, the NIC local address used when completing link resolution
was held in the neighbor entry. A neighbor is not identified by any
NIC local address so remove it.
PiperOrigin-RevId: 338699695
|
|
Previously a link endpoint was passed to
stack.LinkAddressResolver.LinkAddressRequest. With this change,
implementations that want a route for the link address request may
find one through the stack. Other implementations that want to send
a packet without a route may continue to do so using the network
interface directly.
Test: - arp_test.TestLinkAddressRequest
- ipv6.TestLinkAddressRequest
PiperOrigin-RevId: 338577474
|
|
Also enforce the minimum MTU for IPv4 and IPv6, and discard packets if the
minimum is not met.
PiperOrigin-RevId: 338404225
|
|
The IPv4 header checksum has not been checked, at least in recent times,
so add code to do so. Fix all the tests that fail because they never
needed to set the checksum.
Fixes #4484
PiperOrigin-RevId: 337556243
|
|
Currently, fragmentation can only occur during WritePacket(). This enables
it for WritePackets() and WriteIncludedHeaderPacket() as well.
IPv4 unit tests were refactored to be consistent with the IPv6 unit tests.
This removes the extraHeaderReserveLength field and the related
"prependable bytes" unit tests (for both IPv4 and IPv6) because it was only
testing a panic condition when the value was too low.
Fixes #3796
PiperOrigin-RevId: 337550061
|
|
Allow writing an IPv6 packet where the IPv6 header is a provided by
the user.
* Introduce an error to let callers know a header is malformed.
We previously useed tcpip.ErrInvalidOptionValue but that did not seem
appropriate for generic malformed header errors.
* Populate network header in WriteHeaderIncludedPacket
IPv4's implementation of WriteHeaderIncludedPacket did not previously
populate the packet buffer's network header. This change fixes that.
Fixes #4527
Test: ip_test.TestWriteHeaderIncludedPacket
PiperOrigin-RevId: 337534548
|
|
RFC 4861 section 4.4 comments the Target link-layer address option is sometimes
optional in a Neighbor Advertisement packet:
"When responding to a unicast Neighbor Solicitation this option SHOULD be
included."
Tests:
pkg/tcpip/stack:stack_test
- TestEntryStaleToReachableWhenSolicitedConfirmationWithoutAddress
- TestEntryDelayToReachableWhenSolicitedConfirmationWithoutAddress
- TestEntryProbeToReachableWhenSolicitedConfirmationWithoutAddress
pkg/tcpip/network/ipv6:ipv6_test
- TestCallsToNeighborCache
PiperOrigin-RevId: 337396493
|
|
Test helpers should be used for test setup/teardown, not actual
testing. Use cmp.Diff instead of bytes.Equal to improve readability.
PiperOrigin-RevId: 337323242
|
|
This change also brings back the stack.Route.ResolveWith method so that
we can immediately resolve a route when sending an NA in response to a
a NS with a source link layer address option.
Test: ipv6_test.TestNeighorSolicitationResponse
PiperOrigin-RevId: 337185461
|
|
Remove the duplicate NA size variable while I'm here.
See https://tools.ietf.org/html/rfc4861#section-4.4 for the packet format.
PiperOrigin-RevId: 336943206
|
|
Use the correct constant (Solicit, not Advert) while I'm here.
PiperOrigin-RevId: 336924605
|
|
PiperOrigin-RevId: 336339194
|
|
PiperOrigin-RevId: 336304024
|
|
When a response needs to be sent to an incoming packet, the stack should
consult its neighbour table to determine the remote address's link
address.
When an entry does not exist in the stack's neighbor table, the stack
should queue the packet while link resolution completes. See comments.
PiperOrigin-RevId: 336185457
|
|
When the neighbor table already has link address for a neighbor but is
trying to confirm reachability, it may send unicast probes to the
neighbor.
PiperOrigin-RevId: 336166711
|
|
It was originally set to 30s for IPv6 (same as IPv4) but this is not
what RFC 8200 prescibes. Linux also defaults to 60s [1].
[1] https://github.com/torvalds/linux/blob/47ec5303d73ea344e84f46660fff693c57641386/include/net/ipv6.h#L456
PiperOrigin-RevId: 336034636
|
|
...per RFC 4861 s7.1.1.
PiperOrigin-RevId: 335742851
|
|
Most of the IPv4 fragmentation code was moved in the fragmentation
package and it is reused by IPv6 fragmentation.
Test:
- pkg/tcpip/network/ipv4:ipv4_test
- pkg/tcpip/network/ipv6:ipv6_test
- pkg/tcpip/network/fragmentation:fragmentation_test
Fixes #4389
PiperOrigin-RevId: 335714280
|
|
The IPv4 RFCs are specific (though obtuse) that an echo response
packet needs to contain all the options from the echo request,
much as if it been routed back to the sender, though apparently
with a new TTL. They suggest copying the incoming packet header
to achieve this so that is what this patch does.
PiperOrigin-RevId: 335559176
|
|
Before this change, OutgoingPacketErrors was incremented in the
stack.Route methods. This was going to be a problem once
IPv4/IPv6 WritePackets support fragmentation because Route.WritePackets
might now know how many packets are left after an error occurs.
Test:
- pkg/tcpip/network/ipv4:ipv4_test
- pkg/tcpip/network/ipv6:ipv6_test
PiperOrigin-RevId: 334687983
|
|
Add code in IPv6 to send ICMP packets while processing extension headers.
Add some accounting in processing IPV6 Extension headers which
allows us to report meaningful information back in ICMP parameter
problem packets.
IPv4 also needs to send a message when an unsupported protocol
is requested.
Add some tests to generate both ipv4 and ipv6 packets with
various errors and check the responses.
Add some new checkers and cleanup some inconsistencies in
the messages in that file.
Add new error types for the ICMPv4/6 generators.
Fix a bug in the ICMPv4 generator that stopped it from generating
"Unknown protocol" messages.
Updates #2211
PiperOrigin-RevId: 334661716
|
|
Test: stack_test.TestGetMainNICAddressWhenNICDisabled
PiperOrigin-RevId: 334513286
|
|
As per relevant IP RFCS (see code comments), broadcast (for IPv4) and
multicast addresses are not allowed. Currently checks for these are
done at the transport layer, but since it is explicitly forbidden at
the IP layers, check for them there.
This change also removes the UDP.InvalidSourceAddress stat since there
is no longer a need for it.
Test: ip_test.TestSourceAddressValidation
PiperOrigin-RevId: 334490971
|
|
Like matchers, targets should use a module-like register/lookup system. This
replaces the brittle switch statements we had before.
The only behavior change is supporing IPT_GET_REVISION_TARGET. This makes it
much easier to add IPv6 redirect in the next change.
Updates #3549.
PiperOrigin-RevId: 334469418
|
|
Linux doesn't generate a link-local address for the loopback interface.
Test: integration_test.TestInitialLoopbackAddresses
PiperOrigin-RevId: 334453182
|
|
Currently expired IP fragments are discarded only if another fragment for the
same IP datagram is received after timeout or the total size of the fragment
queue exceeded a predefined value.
Test: fragmentation.TestReassemblingTimeout
Fixes #3960
PiperOrigin-RevId: 334423710
|
|
* Remove Capabilities and NICID methods from NetworkEndpoint.
* Remove linkEP and stack parameters from NetworkProtocol.NewEndpoint.
The LinkEndpoint can be fetched from the NetworkInterface. The stack
is passed to the NetworkProtocol when it is created so the
NetworkEndpoint can get it from its protocol.
* Remove stack parameter from TransportProtocol.NewEndpoint.
Like the NetworkProtocol/Endpoint, the stack is passed to the
TransportProtocol when it is created.
PiperOrigin-RevId: 334332721
|
|
* Add network address to network endpoints.
Hold network-specific state in the NetworkEndpoint instead of the stack.
This results in the stack no longer needing to "know" about the network
endpoints and special case certain work for various endpoints
(e.g. IPv6 DAD).
* Provide NetworkEndpoints with an NetworkInterface interface.
Instead of just passing the NIC ID of a NIC, pass an interface so the
network endpoint may query other information about the NIC such as
whether or not it is a loopback device.
* Move NDP code and state to the IPv6 package.
NDP is IPv6 specific so there is no need for it to live in the stack.
* Control forwarding through NetworkProtocols instead of Stack
Forwarding should be controlled on a per-network protocol basis so
forwarding configurations are now controlled through network protocols.
* Remove stack.referencedNetworkEndpoint.
Now that addresses are exposed via AddressEndpoint and only one
NetworkEndpoint is created per interface, there is no need for a
referenced NetworkEndpoint.
* Assume network teardown methods are infallible.
Fixes #3871, #3916
PiperOrigin-RevId: 334319433
|
|
Network or transport protocols may want to reach the stack. Support this
by letting the stack create the protocol instances so it can pass a
reference to itself at protocol creation time.
Note, protocols do not yet use the stack in this CL but later CLs will
make use of the stack from protocols.
PiperOrigin-RevId: 334260210
|
|
Generic ICMP errors were required because the transport dispatcher was
given the responsibility of sending ICMP errors in response to transport
packet delivery failures. Instead, the transport dispatcher should let
network layer know it failed to deliver a packet (and why) and let the
network layer make the decision as to what error to send (if any).
Fixes #4068
PiperOrigin-RevId: 333962333
|
|
Store transport protocol number on packet buffers for use in ICMP error
generation.
Updates #2211.
PiperOrigin-RevId: 333252762
|
|
The new testutil.MockLinkEndpoint implementation is not composed by
channel.Channel anymore because none of its features were used.
PiperOrigin-RevId: 333167753
|
|
PiperOrigin-RevId: 332760843
|
|
PiperOrigin-RevId: 332486383
|
|
Extract parsing utilities so they can be used by the sniffer.
Fixes #3930
PiperOrigin-RevId: 332401880
|
|
IPv6 tests will be added in another CL along with ip6tables.
PiperOrigin-RevId: 332389102
|
|
`ip6tables -t filter` is now usable. NAT support will come in a future CL.
#3549
PiperOrigin-RevId: 332381801
|
|
The refactor aims to simplify the package, by replacing the Go channel with a
PacketBuffer slice.
This code will be reused by tests for IPv6 fragmentation.
PiperOrigin-RevId: 331860411
|
|
IPv4 can accept 65536-octet reassembled packets.
Test:
- ipv4_test.TestInvalidFragments
- ipv4_test.TestReceiveFragments
- ipv6.TestInvalidIPv6Fragments
- ipv6.TestReceiveIPv6Fragments
Fixes #3770
PiperOrigin-RevId: 331382977
|
|
The existing implementation for NetworkProtocol.{Set}Option take
arguments of an empty interface type which all types (implicitly)
implement; any type may be passed to the functions.
This change introduces marker interfaces for network protocol options
that may be set or queried which network protocol option types implement
to ensure that invalid types are caught at compile time. Different
interfaces are used to allow the compiler to enforce read-only or
set-only socket options.
PiperOrigin-RevId: 328980359
|
|
This change adds an option to replace the current implementation of ARP through
linkAddrCache, with an implementation of NUD through neighborCache. Switching
to using NUD for both ARP and NDP is beneficial for the reasons described by
RFC 4861 Section 3.1:
"[Using NUD] significantly improves the robustness of packet delivery in the
presence of failing routers, partially failing or partitioned links, or nodes
that change their link-layer addresses. For instance, mobile nodes can move
off-link without losing any connectivity due to stale ARP caches."
"Unlike ARP, Neighbor Unreachability Detection detects half-link failures and
avoids sending traffic to neighbors with which two-way connectivity is
absent."
Along with these changes exposes the API for querying and operating the
neighbor cache. Operations include:
- Create a static entry
- List all entries
- Delete all entries
- Remove an entry by address
This also exposes the API to change the NUD protocol constants on a per-NIC
basis to allow Neighbor Discovery to operate over links with widely varying
performance characteristics. See [RFC 4861 Section 10][1] for the list of
constants.
Finally, an API for subscribing to NUD state changes is exposed through
NUDDispatcher. See [RFC 4861 Appendix C][3] for the list of edges.
Tests:
pkg/tcpip/network/arp:arp_test
+ TestDirectRequest
pkg/tcpip/network/ipv6:ipv6_test
+ TestLinkResolution
+ TestNDPValidation
+ TestNeighorAdvertisementWithTargetLinkLayerOption
+ TestNeighorSolicitationResponse
+ TestNeighorSolicitationWithSourceLinkLayerOption
+ TestRouterAdvertValidation
pkg/tcpip/stack:stack_test
+ TestCacheWaker
+ TestForwardingWithFakeResolver
+ TestForwardingWithFakeResolverManyPackets
+ TestForwardingWithFakeResolverManyResolutions
+ TestForwardingWithFakeResolverPartialTimeout
+ TestForwardingWithFakeResolverTwoPackets
+ TestIPv6SourceAddressSelectionScopeAndSameAddress
[1]: https://tools.ietf.org/html/rfc4861#section-10
[2]: https://tools.ietf.org/html/rfc4861#appendix-C
Fixes #1889
Fixes #1894
Fixes #1895
Fixes #1947
Fixes #1948
Fixes #1949
Fixes #1950
PiperOrigin-RevId: 328365034
|
|
As per RFC 8200 Section 4.5:
The Next Header field of the last header of the Per-Fragment
headers is obtained from the Next Header field of the first
fragment's Fragment header.
Test:
- pkg/tcpip/network/ipv6:ipv6_test
- pkg/tcpip/network/ipv4:ipv4_test
- pkg/tcpip/network/fragmentation:fragmentation_test
Updates #2197
PiperOrigin-RevId: 327671635
|
|
PiperOrigin-RevId: 327042869
|
|
The NetworkEndpoint does not need to be created for each address.
Most of the work the NetworkEndpoint does is address agnostic.
PiperOrigin-RevId: 326759605
|
|
This is a preparatory commit for a larger commit working on
ICMP generation in error cases.
This is removal of technical debt and cleanup in the gvisor code
as part of gvisor issue 2211.
Updates #2211.
PiperOrigin-RevId: 326615389
|
|
Formerly, when a packet is constructed or parsed, all headers are set by the
client code. This almost always involved prepending to pk.Header buffer or
trimming pk.Data portion. This is known to prone to bugs, due to the complexity
and number of the invariants assumed across netstack to maintain.
In the new PacketHeader API, client will call Push()/Consume() method to
construct/parse an outgoing/incoming packet. All invariants, such as slicing
and trimming, are maintained by the API itself.
NewPacketBuffer() is introduced to create new PacketBuffer. Zero value is no
longer valid.
PacketBuffer now assumes the packet is a concatenation of following portions:
* LinkHeader
* NetworkHeader
* TransportHeader
* Data
Any of them could be empty, or zero-length.
PiperOrigin-RevId: 326507688
|
|
NetworkEndpoints set the number on outgoing packets in Write() and
NetworkProtocols set them on incoming packets in Parse().
Needed for #3549.
PiperOrigin-RevId: 325938745
|
|
Packets MUST NOT use a non-unicast source address for ICMP
Echo Replies.
Test: integration_test.TestPingMulticastBroadcast
PiperOrigin-RevId: 325634380
|