Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 272083936
|
|
Previously, the only safe way to use an fdbased endpoint was to leak the FD.
This change makes it possible to safely close the FD.
This is the first step towards having stoppable stacks.
Updates #837
PiperOrigin-RevId: 270346582
|
|
They are no-ops, so the standard rule works fine.
PiperOrigin-RevId: 268776264
|
|
PiperOrigin-RevId: 267709597
|
|
The blockingpoll_unsafe.go was copied to blockingpoll_noyield_unsafe.go
during merging commit 7206202bb9439499. If it still stay here, it would
cause build errors on non-amd64 platform.
ERROR:
pkg/tcpip/link/rawfile/BUILD:5:1:
GoCompilePkg
pkg/tcpip/link/rawfile.a
failed (Exit 1) builder failed: error executing command
bazel-out/host/bin/external/go_sdk/builder compilepkg -sdk
external/go_sdk -installsuffix linux_arm64 -src
pkg/tcpip/link/rawfile/blockingpoll_noyield_unsafe.go -src ...
(remaining 33 argument(s) skipped)
Use --sandbox_debug to see verbose messages from the sandbox
compilepkg: error running subcommand: exit status 2
pkg/tcpip/link/rawfile/blockingpoll_yield_unsafe.go:35:6:
BlockingPoll redeclared in this block
previous declaration at
pkg/tcpip/link/rawfile/blockingpoll_unsafe.go:26:78
Target //pkg/tcpip/link/rawfile:rawfile failed to build
Use --verbose_failures to see the command lines of failed build steps.
INFO: Elapsed time: 25.531s, Critical Path: 21.08s
INFO: 262 processes: 262 linux-sandbox.
FAILED: Build did NOT complete successfully
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I4e21f82984225d0aa173de456f7a7c66053a053e
|
|
PiperOrigin-RevId: 265534854
|
|
PiperOrigin-RevId: 264218306
|
|
Signed-off-by: Haibo Xu haibo.xu@arm.com
Change-Id: Ib6b4aa2db19032e58bf0395f714e6883caee460a
|
|
Signed-off-by: Haibo Xu haibo.xu@arm.com
Change-Id: Id4489554b9caa332695df8793d361f8332f6a13b
|
|
Signed-off-by: Haibo Xu haibo.xu@arm.com
Change-Id: I2376e502c1a860d5e624c8a8e3afab5da4c53022
|
|
This stub had the wrong function signature.
PiperOrigin-RevId: 262992682
|
|
syscall.POLL is not supported on arm64, using syscall.PPOLL
to support both the x86 and arm64. refs #63
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I2c81a063d3ec4e7e6b38fe62f17a0924977f505e
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/543 from xiaobo55x:master ba598263fd3748d1addd48e4194080aa12085164
PiperOrigin-RevId: 260752049
|
|
Addresses obvious typos, in the documentation only.
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65
PiperOrigin-RevId: 255477779
|
|
This test will occasionally fail waiting to read a packet. From repeated runs,
I've seen it up to 1.5s for waitForPackets to complete.
PiperOrigin-RevId: 254484627
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
PiperOrigin-RevId: 252918338
|
|
This allows an fdbased endpoint to have multiple underlying fd's from which
packets can be read and dispatched/written to.
This should allow for higher throughput as well as better scalability of the
network stack as number of connections increases.
Updates #231
PiperOrigin-RevId: 251852825
|
|
PiperOrigin-RevId: 251788534
|
|
Funcion signatures are not validated during compilation. Since
they are not exported, they can change at any time. The guard
ensures that they are verified at least on every version upgrade.
PiperOrigin-RevId: 250733742
|
|
This is in preparation to support an fdbased endpoint that can read/dispatch
packets from multiple underlying fds.
Updates #231
PiperOrigin-RevId: 249337074
Change-Id: Id7d375186cffcf55ae5e38986e7d605a96916d35
|
|
And stop storing the Filesystem in the MountSource.
This allows us to decouple the MountSource filesystem type from the name of the
filesystem.
PiperOrigin-RevId: 247292982
Change-Id: I49cbcce3c17883b7aa918ba76203dfd6d1b03cc8
|
|
Testing:
Unit tests and also large ping in Fuchsia OS
PiperOrigin-RevId: 246563592
Change-Id: Ia12ab619f64f4be2c8d346ce81341a91724aef95
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|
|
Packet socket receive buffers default to the sysctl value of
net.core.rmem_default and are capped by net.core.rmem_max both
which are usually set to 208KB on most systems.
Since we can't expect every gVisor user to bump these we use
SO_RCVBUFFORCE to exceed the limit. This is possible as runsc runs
with CAP_NET_ADMIN outside the sandbox and can do this before
the FD is passed to the sentry inside the sandbox.
Updates #211
iperf output w/ 4MB buffer.
iperf3 -c 172.17.0.2 -t 100
Connecting to host 172.17.0.2, port 5201
[ 4] local 172.17.0.1 port 40378 connected to 172.17.0.2 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 1.15 GBytes 9.89 Gbits/sec 0 1.02 MBytes
[ 4] 1.00-2.00 sec 1.18 GBytes 10.2 Gbits/sec 0 1.02 MBytes
[ 4] 2.00-3.00 sec 965 MBytes 8.09 Gbits/sec 0 1.02 MBytes
[ 4] 3.00-4.00 sec 942 MBytes 7.90 Gbits/sec 0 1.02 MBytes
[ 4] 4.00-5.00 sec 952 MBytes 7.99 Gbits/sec 0 1.02 MBytes
[ 4] 5.00-6.00 sec 1.14 GBytes 9.81 Gbits/sec 0 1.02 MBytes
[ 4] 6.00-7.00 sec 1.13 GBytes 9.68 Gbits/sec 0 1.02 MBytes
[ 4] 7.00-8.00 sec 930 MBytes 7.80 Gbits/sec 0 1.02 MBytes
[ 4] 8.00-9.00 sec 1.15 GBytes 9.91 Gbits/sec 0 1.02 MBytes
[ 4] 9.00-10.00 sec 938 MBytes 7.87 Gbits/sec 0 1.02 MBytes
[ 4] 10.00-11.00 sec 737 MBytes 6.18 Gbits/sec 0 1.02 MBytes
[ 4] 11.00-12.00 sec 1.16 GBytes 9.93 Gbits/sec 0 1.02 MBytes
[ 4] 12.00-13.00 sec 917 MBytes 7.69 Gbits/sec 0 1.02 MBytes
[ 4] 13.00-14.00 sec 1.19 GBytes 10.2 Gbits/sec 0 1.02 MBytes
[ 4] 14.00-15.00 sec 1.01 GBytes 8.70 Gbits/sec 0 1.02 MBytes
[ 4] 15.00-16.00 sec 1.20 GBytes 10.3 Gbits/sec 0 1.02 MBytes
[ 4] 16.00-17.00 sec 1.14 GBytes 9.80 Gbits/sec 0 1.02 MBytes
^C[ 4] 17.00-17.60 sec 718 MBytes 10.1 Gbits/sec 0 1.02 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-17.60 sec 18.4 GBytes 8.98 Gbits/sec 0 sender
[ 4] 0.00-17.60 sec 0.00 Bytes 0.00 bits/sec receiver
PiperOrigin-RevId: 245470590
Change-Id: I1c08c5ee8345de6ac070513656a4703312dc3c00
|
|
This CL fixes the following bugs:
- Uses atomic to set/read status instead of binary.LittleEndian.PutUint32 etc
which are not atomic.
- Increments ringOffsets for frames that are truncated (i.e status is
tpStatusCopy)
- Does not ignore frames with tpStatusLost bit set as they are valid frames and
only indicate that there some frames were lost before this one and metrics can
be retrieved with a getsockopt call.
- Adds checks to make sure blockSize is a multiple of page size. This is
required as the kernel allocates in pages per block and rejects sizes that are
not page aligned with an EINVAL.
Updates #210
PiperOrigin-RevId: 244959464
Change-Id: I5d61337b7e4c0f8a3063dcfc07791d4c4521ba1f
|
|
It is possible to create a listening socket which will accept
IPv4 and IPv6 connections. In this case, we set IPv6ProtocolNumber
for all accepted endpoints, even if they handle IPv4 connections.
This means that we can't use endpoint.netProto to set gso.L3HdrLen.
PiperOrigin-RevId: 244227948
Change-Id: I5e1863596cb9f3d216febacdb7dc75651882eef1
|
|
RELNOTES: n/a
PiperOrigin-RevId: 244031742
Change-Id: Id0cdb73194018fb5979e67b58510ead19b5a2b81
|
|
PiperOrigin-RevId: 242704699
Change-Id: I87db368ca343b3b4bf4f969b17d3aa4ce2f8bd4f
|
|
The linux packet socket can handle GSO packets, so we can segment packets to
64K instead of the MTU which is usually 1500.
Here are numbers for the nginx-1m test:
runsc: 579330.01 [Kbytes/sec] received
runsc-gso: 1794121.66 [Kbytes/sec] received
runc: 2122139.06 [Kbytes/sec] received
and for tcp_benchmark:
$ tcp_benchmark --duration 15 --ideal
[ 4] 0.0-15.0 sec 86647 MBytes 48456 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal
[ 4] 0.0-15.0 sec 2173 MBytes 1214 Mbits/sec
$ tcp_benchmark --client --duration 15 --ideal --gso 65536
[ 4] 0.0-15.0 sec 19357 MBytes 10825 Mbits/sec
PiperOrigin-RevId: 240809103
Change-Id: I2637f104db28b5d4c64e1e766c610162a195775a
|
|
Previous memory allocation was excessive (80 MB). Changed
it to use 2 MB instead. There is no drop in perfomance due
to this change:
ab -n 100 -c 10 http://server/latin10m.txt ==> 10 MB file
80 MB: 178 MB/s
2 MB: 181 MB/s
PiperOrigin-RevId: 238321594
Change-Id: I1c8aed13cad5d75f4506d2b406b305117055fbe5
|
|
HandleLocal is very similar conceptually to MULTICAST_LOOP, so we can unify
the implementations. This has the benefit of making HandleLocal apply even when
the fdbased link endpoint isn't in use.
In addition, move looping logic to route creation so that it doesn't need to be
run for each packet. This should improve performance.
PiperOrigin-RevId: 238099480
Change-Id: I72839f16f25310471453bc9d3fb8544815b25c23
|
|
Also exposes ipv4.MaxTotalSize since it is a generally useful constant.
PiperOrigin-RevId: 235799755
Change-Id: I1fa8d5294bf355acf5527cfdf274b3687d3c8b13
|
|
PACKET_RX_RING allows the use of an mmapped buffer to receive packets from the
kernel. This should cut down the number of host syscalls that need to be made
to receive packets when the underlying fd is a socket of the AF_PACKET type.
PiperOrigin-RevId: 233834998
Change-Id: I8060025c6ced206986e94cc46b8f382b81bfa47f
|
|
PiperOrigin-RevId: 233139020
Change-Id: I2e7089fa25d20e5662eb941054a684d41f5d3e12
|
|
PiperOrigin-RevId: 232937200
Change-Id: I5c3709cc8f1313313ff618a45e48c14a3a111cb4
|
|
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
|
|
This should reduce the number of syscalls required to process packets
significantly and improve throughputs.
PiperOrigin-RevId: 231366886
Change-Id: I8b38077262bf9c53176bc4a94b530188d3d7c0ca
|
|
PiperOrigin-RevId: 228979583
Change-Id: I69bd82def48ceb19bc8558c890622b8528d98764
|
|
...to (remote, local), reflecting the (correct) names in the implementation of
DeliverNetworkPacket (see tcpip/stack/nic.go).
Also trim the names in DeliverNetworkPacket and elsewhere to avoid stuttering;
since the type is tcpip.LinkAddress, there's no need to include "LinkAddr" in
the parameter names.
Note that every callsite passes arguments in the order (src, dst).
PiperOrigin-RevId: 221514396
Change-Id: I3637454ad0d6e62a19e4dcbc2a16493798bd0f09
|
|
Replacing map lookups with slice indexing is higher performance.
PiperOrigin-RevId: 219569901
Change-Id: I9b7cd22abd4b95383025edbd5a80d1c1a4496936
|
|
This change also adds extensive testing to the p9 package via mocks. The sanity
checks and type checks are moved from the gofer into the core package, where
they can be more easily validated.
PiperOrigin-RevId: 218296768
Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
Currently, in the face of FileMem fragmentation and a large sendmsg or
recvmsg call, host sockets may pass > 1024 iovecs to the host, which
will immediately cause the host to return EMSGSIZE.
When we detect this case, use a single intermediate buffer to pass to
the kernel, copying to/from the src/dst buffer.
To avoid creating unbounded intermediate buffers, enforce message size
checks and truncation w.r.t. the send buffer size. The same
functionality is added to netstack unix sockets for feature parity.
PiperOrigin-RevId: 216590198
Change-Id: I719a32e71c7b1098d5097f35e6daf7dd5190eff7
|
|
...by increasing the allotted timeout and using direct comparison rather than
reflect.DeepEqual (which should be faster).
PiperOrigin-RevId: 214027024
Change-Id: I0a2690e65c7e14b4cc118c7312dbbf5267dc78bc
|
|
This allows a NetworkDispatcher to implement transparent bridging,
assuming all implementations of LinkEndpoint.WritePacket call eth.Encode
with header.EthernetFields.SrcAddr set to the passed
Route.LocalLinkAddress, if it is provided.
PiperOrigin-RevId: 213686651
Change-Id: I446a4ac070970202f0724ef796ff1056ae4dd72a
|
|
It is the same as buffer.Prependable.View.
PiperOrigin-RevId: 213064166
Change-Id: Ib33b8a2c4da864209d9a0be0a1c113be10b520d3
|
|
PiperOrigin-RevId: 213053370
Change-Id: I60ea89572b4fca53fd126c870fcbde74fcf52562
|
|
PiperOrigin-RevId: 212757571
Change-Id: I04200df9e45c21eb64951cd2802532fa84afcb1a
|
|
Makes it possible to avoid copying or allocating in cases where DeliverNetworkPacket (rx)
needs to turn around and call WritePacket (tx) with its VectorisedView.
Also removes the restriction on having VectorisedViews with multiple views in the write path.
PiperOrigin-RevId: 211728717
Change-Id: Ie03a65ecb4e28bd15ebdb9c69f05eced18fdfcff
|
|
PiperOrigin-RevId: 211525182
Change-Id: I462c20328955c77ecc7bfd8ee803ac91f15858e6
|