summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/link
AgeCommit message (Collapse)Author
2021-03-04Merge release-20210301.0-12-g1cd76d958 (automated)gVisor bot
2021-03-03Make dedicated methods for data operations in PacketBufferTing-Yu Wang
One of the preparation to decouple underlying buffer implementation. There are still some methods that tie to VectorisedView, and they will be changed gradually in later CLs. This CL also introduce a new ICMPv6ChecksumParams to replace long list of parameters when calling ICMPv6Checksum, aiming to be more descriptive. PiperOrigin-RevId: 360778149
2021-03-03Merge release-20210301.0-5-ga9441aea2 (automated)gVisor bot
2021-03-03[op] Replace syscall package usage with golang.org/x/sys/unix in pkg/.Ayush Ranjan
The syscall package has been deprecated in favor of golang.org/x/sys. Note that syscall is still used in the following places: - pkg/sentry/socket/hostinet/stack.go: some netlink related functionalities are not yet available in golang.org/x/sys. - syscall.Stat_t is still used in some places because os.FileInfo.Sys() still returns it and not unix.Stat_t. Updates #214 PiperOrigin-RevId: 360701387
2021-02-24Merge release-20210208.0-89-gba4dfa717 (automated)gVisor bot
2021-02-24Move //pkg/gate.Gate to //pkg/sync.Jamie Liu
- Use atomic add rather than CAS in every Gate method, which is slightly faster in most cases. - Implement Close wakeup using gopark/goready to avoid channel allocation. New benchmarks: name old time/op new time/op delta GateEnterLeave-12 16.7ns ± 1% 10.3ns ± 1% -38.44% (p=0.000 n=9+8) GateClose-12 50.2ns ± 8% 42.4ns ± 6% -15.44% (p=0.000 n=10+10) GateEnterLeaveAsyncClose-12 972ns ± 2% 640ns ± 7% -34.15% (p=0.000 n=9+10) PiperOrigin-RevId: 359336344
2021-02-18Merge release-20210208.0-73-gf80a857a4 (automated)gVisor bot
2021-02-18Bump build constraints to Go 1.18Michael Pratt
These are bumped to allow early testing of Go 1.17. Use will be audited closer to the 1.17 release. PiperOrigin-RevId: 358278615
2021-02-07Merge release-20210125.0-97-g554c405e8 (automated)gVisor bot
2021-02-06Synchronously send packets over pipe link endpointGhanan Gowripalan
Before this change, packets were delivered asynchronously to the remote end of a pipe. This was to avoid a deadlock during link resolution where the stack would attempt to double-lock a mutex (see removed comments in the parent commit for details). As of https://github.com/google/gvisor/commit/4943347137, we do not hold locks while sending link resolution probes so the deadlock will no longer occur. PiperOrigin-RevId: 356066224
2021-01-29Merge release-20210125.0-21-g8d1afb418 (automated)gVisor bot
2021-01-28Change tcpip.Error to an interfaceTamir Duberstein
This makes it possible to add data to types that implement tcpip.Error. ErrBadLinkEndpoint is removed as it is unused. PiperOrigin-RevId: 354437314
2021-01-26Merge release-20210112.0-86-gb4665aef8 (automated)gVisor bot
2021-01-25fdbased: Dedup code related to iovec readingTing-Yu Wang
PiperOrigin-RevId: 353755271
2021-01-21Merge release-20210112.0-60-g89df5a681 (automated)gVisor bot
2021-01-21Queue packets in WritePackets when resolving link addressGhanan Gowripalan
Test: integration_test.TestWritePacketsLinkResolution Fixes #4458. PiperOrigin-RevId: 353108826
2021-01-21Merge release-20210112.0-59-g0ca4cf769 (automated)gVisor bot
2021-01-21Populate EgressRoute, GSO, Netproto in NICGhanan Gowripalan
fdbased and qdisc layers expect these fields to already be populated before being reached. PiperOrigin-RevId: 353099492
2021-01-16Merge release-20210112.0-39-g2814a032b (automated)gVisor bot
2021-01-15Support GetLinkAddress with neighborCacheGhanan Gowripalan
Test: integration_test.TestGetLinkAddress PiperOrigin-RevId: 352119404
2021-01-16Merge release-20210112.0-38-gfd5b52c87 (automated)gVisor bot
2021-01-15Only pass stack.Route's fields to LinkEndpointsGhanan Gowripalan
stack.Route is used to send network packets and resolve link addresses. A LinkEndpoint does not need to do either of these and only needs the route's fields at the time of the packet write request. Since LinkEndpoints only need the route's fields when writing packets, pass a stack.RouteInfo instead. PiperOrigin-RevId: 352108405
2021-01-15Merge release-20210112.0-34-g55c7fe48d (automated)gVisor bot
2021-01-15Populate EgressRoute, GSO, Netproto for batch writesGhanan Gowripalan
We loop over the list of packets anyways so setting these aren't expensive. Now that they are populated only by the link endpoint that uses them, TCP does not need to. PiperOrigin-RevId: 352090853
2021-01-13Switch uses of os.Getenv that check for empty string to os.LookupEnv.Dean Deng
Whether the variable was found is already returned by syscall.Getenv. os.Getenv drops this value while os.Lookupenv passes it along. PiperOrigin-RevId: 351674032
2021-01-12Fix simple mistakes identified by goreportcard.Adin Scannell
These are primarily simplification and lint mistakes. However, minor fixes are also included and tests added where appropriate. PiperOrigin-RevId: 351425971
2021-01-06Merge release-20201208.0-118-g7817e3b5e (automated)gVisor bot
2021-01-06Do not filter frames in ethernet link endpointGhanan Gowripalan
Ethernet frames are usually filtered at the hardware-level so there is no need to filter the frames in software. For test purposes, a new link endpoint was introduced to filter frames based on their destination. PiperOrigin-RevId: 350422941
2020-12-28Merge release-20201208.0-89-g3ff7324df (automated)gVisor bot
2020-12-22Correctly log sniffed ARP packetsTamir Duberstein
This condition was inverted in 360006d. PiperOrigin-RevId: 348679088
2020-12-22Invoke address resolution upon subsequent traffic to Failed neighborPeter Johnston
Removes the period of time in which subseqeuent traffic to a Failed neighbor immediately fails with ErrNoLinkAddress. A Failed neighbor is one in which address resolution fails; or in other words, the neighbor's IP address cannot be translated to a MAC address. This means removing the Failed state for linkAddrCache and allowing transitiong out of Failed into Incomplete for neighborCache. Previously, both caches would transition entries to Failed after address resolution fails. In this state, any subsequent traffic requested within an unreachable time would immediately fail with ErrNoLinkAddress. This does not follow RFC 4861 section 7.3.3: If address resolution fails, the entry SHOULD be deleted, so that subsequent traffic to that neighbor invokes the next-hop determination procedure again. Invoking next-hop determination at this point ensures that alternate default routers are tried. The API for getting a link address for a given address, whether through the link address cache or the neighbor table, is updated to optionally take a callback which will be called when address resolution completes. This allows `Route` to handle completing link resolution internally, so callers of (*Route).Resolve (e.g. endpoints) don’t have to keep track of when it completes and update the Route accordingly. This change also removes the wakers from LinkAddressCache, NeighborCache, and Route in favor of the callbacks, and callers that previously used a waker can now just pass a callback to (*Route).Resolve that will notify the waker on resolution completion. Fixes #4796 Startblock: has LGTM from sbalana and then add reviewer ghanan PiperOrigin-RevId: 348597478
2020-12-12Merge release-20201208.0-36-g1e92732eb (automated)gVisor bot
2020-12-11Merge release-20201130.0-84-gbcb97a3bb (automated)gVisor bot
2020-12-10Disable host reassembly for fragments.Bhasker Hariharan
fdbased endpoint was enabling fragment reassembly on the host AF_PACKET socket to ensure that fragments are delivered inorder to the right dispatcher. But this prevents fragments from being delivered to gvisor at all and makes testing of gvisor's fragment reassembly code impossible. The potential impact from this is minimal since IP Fragmentation is not really that prevelant and in cases where we do get fragments we may deliver the fragment out of order to the TCP layer as multiple network dispatchers may process the fragments and deliver a reassembled fragment after the next packet has been delivered to the TCP endpoint. While not desirable I believe the impact from this is minimal due to low prevalence of fragmentation. Also removed PktType and Hatype fields when binding the socket as these are not used when binding. Its just confusing to have them specified. See: https://man7.org/linux/man-pages/man7/packet.7.html "Fields used for binding are sll_family (should be AF_PACKET), sll_protocol, and sll_ifindex." Fixes #5055 PiperOrigin-RevId: 346919439
2020-12-03Merge release-20201130.0-31-g3ff1aef54 (automated)gVisor bot
2020-12-03Make `stack.Route` thread safePeter Johnston
Currently we rely on the user to take the lock on the endpoint that owns the route, in order to modify it safely. We can instead move `Route.RemoteLinkAddress` under `Route`'s mutex, and allow non-locking and thread-safe access to other fields of `Route`. PiperOrigin-RevId: 345461586
2020-11-25Merge release-20201109.0-117-g2485a4e2c (automated)gVisor bot
2020-11-25Make stack.Route safe to access concurrentlyGhanan Gowripalan
Multiple goroutines may use the same stack.Route concurrently so the stack.Route should make sure that any functions called on it are thread-safe. Fixes #4073 PiperOrigin-RevId: 344320491
2020-11-18Merge release-20201109.0-69-g9d148627f (automated)gVisor bot
2020-11-18Introduce stack.WritePacketToRemote, remove LinkEndpoint.WriteRawPacketBruno Dal Bo
Redefine stack.WritePacket into stack.WritePacketToRemote which lets the NIC decide whether to append link headers. PiperOrigin-RevId: 343071742
2020-11-17Merge release-20201109.0-60-g7492ed6bd (automated)gVisor bot
2020-11-17Add per-sniffer instance log prefixBruno Dal Bo
A prefix associated with a sniffer instance can help debug situations where more than one NIC (i.e. more than one sniffer) exists. PiperOrigin-RevId: 342950027
2020-11-16Merge release-20201109.0-51-gcc5cfce4c (automated)gVisor bot
2020-11-16Remove ARP address workaroundGhanan Gowripalan
- Make AddressableEndpoint optional for NetworkEndpoint. Not all NetworkEndpoints need to support addressing (e.g. ARP), so AddressableEndpoint should only be implemented for protocols that support addressing such as IPv4 and IPv6. With this change, tcpip.ErrNotSupported will be returned by the stack when attempting to modify addresses on a network endpoint that does not support addressing. Now that packets are fully handled at the network layer, and (with this change) addresses are optional for network endpoints, we no longer need the workaround for ARP where a fake ARP address was added to each NIC that performs ARP so that packets would be delivered to the ARP layer. PiperOrigin-RevId: 342722547
2020-11-09Merge release-20201030.0-53-g0fb5353e4 (automated)gVisor bot
2020-11-09Initialize references with a value of 1.Dean Deng
This lets us avoid treating a value of 0 as one reference. All references using the refsvfs2 template must call InitRefs() before the reference is incremented/decremented, or else a panic will occur. Therefore, it should be pretty easy to identify missing InitRef calls during testing. Updates #1486. PiperOrigin-RevId: 341411151
2020-11-07Merge release-20201030.0-46-g5288e1941 (automated)gVisor bot
2020-11-06Trim link headers from buffer clone when sniffingGhanan Gowripalan
PiperOrigin-RevId: 341135083
2020-10-29Merge release-20201019.0-95-g3b4674ffe (automated)gVisor bot
2020-10-23Merge release-20201019.0-34-g9ca66ec59 (automated)gVisor bot