| Age | Commit message (Collapse) | Author |
|---|
|
|
|
When transmitting packets we only need to notify if the peer is not
already processing packets. sharedData region is used to enable/disable
notifications and the peer will disable notifications when its actively
processing packets and enable notifications just before it goes to
sleep waiting on packets. This allows more efficient transmit as the
sharedmem endpoint does not need to notify on eventFD and incur an
expensive host systemcall when the peer is already awake.
PiperOrigin-RevId: 406018843
|
|
|
|
Implement WriteRawPacket for pipe by calling `DeliverNetworkPacket`
on the other end with empty values for the route and protocol number,
and relies on the `NetworkDispatcher` to decapsulate the link layer
header from the raw packet itself.
PiperOrigin-RevId: 403461448
|
|
|
|
Use route/protocol from packetbuffer.
Sharedmem implementation should use the EgressRoute/NetworkProtocolNumber
embedded in the packetbuffer rather than what is passed as parameters to
Write(Raw)Packet(s).
PiperOrigin-RevId: 402934171
|
|
|
|
The same create/write/read pattern is copied around several places. It's easier
to understand in a package with names and comments, and we can reuse the smart
blocking code in package rawfile.
PiperOrigin-RevId: 401647108
|
|
|
|
PiperOrigin-RevId: 401088040
|
|
|
|
|
|
|
|
Fixed a bug introduced in the following commit:
https://github.com/google/gvisor/commit/979d6e7d77b17e94defc29515180cc75d3560383
The commit introduced a bug which causes the recvmmsg dispatcher to never exit
as BlockingPoll is now called with two fds and poll will not return an error
anymore if one of the FD is closed. We need to explicitly check the events for
each FD to determine if the sentry FD is closed.
ReadV dispatcher does not have the same issue as Readv does not rely on sk_err
field of the underlying socket to determine if the socket is in an error
state. Recvmmsg OTOH seems to get confused and always returns EAGAIN if poll()
is called which queries the sk_err field and clears it.
PiperOrigin-RevId: 396676135
|
|
|
|
Previously, gVisor did not represent loopback devices as an ethernet
device as Linux does. To maintain Linux API compatibility for packet
sockets, a workaround was used to add an ethernet header if a link
header was not already present in the packet buffer delivered to a
packet endpoint.
However, this workaround is a bug for non-ethernet based interfaces; not
all links use an ethernet header (e.g. pure L3/TUN interfaces).
As of 3b4bb947517d0d9010120aaa1c3989fd6abf278e, gVisor represents
loopback devices as an ethernet-based device so this workaround can
now be removed.
BUG: https://fxbug.dev/81592
Updates #6530, #6531.
PiperOrigin-RevId: 395819151
|
|
|
|
This change removes NetworkDispatcher.DeliverOutboundPacket.
Since all packet writes go through the NIC (the only NetworkDispatcher),
we can deliver outgoing packets to interested packet endpoints before
writing the packet to the link endpoint as the stack expects that all
packets that get delivered to a link endpoint are transmitted on the
wire. That is, link endpoints no longer need to let the stack know when
it writes a packet as the stack already knows about the packet it writes
through a link endpoint.
PiperOrigin-RevId: 395761629
|
|
|
|
...through the loopback interface, only.
This change only supports sending on packet sockets through the loopback
interface as the loopback interface is the only interface used in packet
socket syscall tests - the other link endpoints are not excercised with
the existing test infrastructure.
Support for sending on packet sockets through the other interfaces will
be added as needed.
BUG: https://fxbug.dev/81592
PiperOrigin-RevId: 394368899
|
|
|
|
...returning unsupported errors.
PiperOrigin-RevId: 393388991
|
|
|
|
...to match Linux behaviour.
We can see evidence of Linux representing loopback as an ethernet-based
device below:
```
# EUI-48 based MAC addresses.
$ ip link show lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
# tcpdump showing ethernet frames when sniffing loopback and logging the
# link-type as EN10MB (Ethernet).
$ sudo tcpdump -i lo -e -c 2 -n
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on lo, link-type EN10MB (Ethernet), snapshot length 262144 bytes
03:09:05.002034 00:00:00:00:00:00 > 00:00:00:00:00:00, ethertype IPv4 (0x0800), length 66: 127.0.0.1.9557 > 127.0.0.1.36828: Flags [.], ack 3562800815, win 15342, options [nop,nop,TS val 843174495 ecr 843159493], length 0
03:09:05.002094 00:00:00:00:00:00 > 00:00:00:00:00:00, ethertype IPv4 (0x0800), length 66: 127.0.0.1.36828 > 127.0.0.1.9557: Flags [.], ack 1, win 6160, options [nop,nop,TS val 843174496 ecr 843159493], length 0
2 packets captured
116 packets received by filter
0 packets dropped by kernel
```
Wireshark shows a similar result as the tcpdump example above.
Linux's loopback setup: https://github.com/torvalds/linux/blob/5bfc75d92efd494db37f5c4c173d3639d4772966/drivers/net/loopback.c#L162
PiperOrigin-RevId: 391836719
|
|
|
|
Removes package syserror and moves still relevant code to either linuxerr
or to syserr (to be later removed).
Internal errors are converted from random types to *errors.Error types used
in linuxerr. Internal errors are in linuxerr/internal.go.
PiperOrigin-RevId: 390724202
|
|
|
|
Convert remaining public errors (e.g. EINTR) from syserror to linuxerr.
PiperOrigin-RevId: 390471763
|
|
|
|
This change will allow us to remove the default link in a packetimpact test so
we can reduce indeterministic behaviors as required in https://fxbug.dev/78430.
This will also help with testing #1388.
Updates #578, #1388.
PiperOrigin-RevId: 387896847
|
|
|
|
This CL introduces a 'checklinkname' analyzer, which provides rudimentary
type-checking that verifies that function signatures on the local and remote
sides of //go:linkname directives match expected values.
If the Go standard library changes the definitions of any of these function,
checklinkname will flag the change as a finding, providing an error informing
the gVisor team to adapt to the upstream changes. This allows us to eliminate
the majority of gVisor's forward-looking negative build tags, as we can catch
mismatches in testing [1].
The remaining forward-looking negative build tags are covering shared struct
definitions, which I hope to add to checklinkname in a future CL.
[1] Of course, semantics/requirements can change without the signature
changing, so we still must be careful, but this covers the common case.
PiperOrigin-RevId: 387873847
|
|
|
|
PiperOrigin-RevId: 387513118
|
|
|
|
|
|
PiperOrigin-RevId: 385894869
|
|
|
|
|
|
Update the following from syserror to the linuxerr equivalent:
EEXIST
EFAULT
ENOTDIR
ENOTTY
EOPNOTSUPP
ERANGE
ESRCH
PiperOrigin-RevId: 384329869
|
|
|
|
Remove "partial write" handling as io.Writer.Write is not permitted to
return a nil error on partial writes, and this code was already
panicking on non-nil errors.
PiperOrigin-RevId: 384289970
|
|
|
|
PiperOrigin-RevId: 383481745
|
|
|
|
PiperOrigin-RevId: 383426091
|
|
|
|
Update all instances of the above errors to the faster linuxerr implementation.
With the temporary linuxerr.Equals(), no logical changes are made.
PiperOrigin-RevId: 382306655
|
|
|
|
PiperOrigin-RevId: 382202462
|
