Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 307053624
|
|
PiperOrigin-RevId: 306959393
|
|
PiperOrigin-RevId: 306677789
|
|
Tests now use a MinRTO of 3s instead of default 200ms. This reduced flakiness in
a lot of the congestion control/recovery tests which were flaky due to
retransmit timer firing too early in case the test executors were overloaded.
This change also bumps some of the timeouts in tests which were too sensitive to
timer variations and reduces the number of slow start iterations which can
make the tests run for too long and also trigger retansmit timeouts etc if
the executor is overloaded.
PiperOrigin-RevId: 306562645
|
|
Updates #2243
|
|
Software GSO implementation currently has a complicated code path with
implicit assumptions that all packets to WritePackets carry same Data
and it does this to avoid allocations on the path etc. But this makes it
hard to reuse the WritePackets API.
This change breaks all such assumptions by introducing a new Vectorised
View API ReadToVV which can be used to cleanly split a VV into multiple
independent VVs. Further this change also makes packet buffers linkable
to form an intrusive list. This allows us to get rid of the array of
packet buffers that are passed in the WritePackets API call and replace
it with a list of packet buffers.
While this code does introduce some more allocations in the benchmarks
it doesn't cause any degradation.
Updates #231
PiperOrigin-RevId: 304731742
|
|
This allows the link layer endpoints to consistenly hash a TCP
segment to a single underlying queue in case a link layer endpoint
does support multiple underlying queues.
Updates #231
PiperOrigin-RevId: 302760664
|
|
This is a precursor to be being able to build an intrusive list
of PacketBuffers for use in queuing disciplines being implemented.
Updates #2214
PiperOrigin-RevId: 302677662
|
|
PiperOrigin-RevId: 301208471
|
|
PiperOrigin-RevId: 301157950
|
|
PiperOrigin-RevId: 300832988
|
|
PiperOrigin-RevId: 296526279
|
|
As per RFC 2464 section 7, an IPv6 packet with a multicast destination
address is transmitted to the mapped Ethernet multicast address.
Test:
- ipv6.TestLinkResolution
- stack_test.TestDADResolve
- stack_test.TestRouterSolicitation
PiperOrigin-RevId: 292610529
|
|
This is to aid later implementation for /dev/net/tun device.
PiperOrigin-RevId: 291746025
|
|
PiperOrigin-RevId: 291745021
|
|
* Rename syncutil to sync.
* Add aliases to sync types.
* Replace existing usage of standard library sync package.
This will make it easier to swap out synchronization primitives. For example,
this will allow us to use primitives from github.com/sasha-s/go-deadlock to
check for lock ordering violations.
Updates #1472
PiperOrigin-RevId: 289033387
|
|
Packets written via SOCK_RAW are guaranteed to have network headers, but not
transport headers. Check first whether there are enough bytes left in the packet
to contain a transport header before attempting to parse it.
PiperOrigin-RevId: 282363895
|
|
PiperOrigin-RevId: 282194656
|
|
PiperOrigin-RevId: 282045221
|
|
PiperOrigin-RevId: 280763655
|
|
Sniffer assumed that outgoing packets have transport headers, but
users can write packets via SOCK_RAW with arbitrary transport headers that
netstack doesn't know about. We now explicitly check for the presence of network
and transport headers before assuming they exist.
PiperOrigin-RevId: 280594395
|
|
PiperOrigin-RevId: 280455453
|
|
PacketBuffers are analogous to Linux's sk_buff. They hold all information about
a packet, headers, and payload. This is important for:
* iptables to access various headers of packets
* Preventing the clutter of passing different net and link headers along with
VectorisedViews to packet handling functions.
This change only affects the incoming packet path, and a future change will
change the outgoing path.
Benchmark Regular PacketBufferPtr PacketBufferConcrete
--------------------------------------------------------------------------------
BM_Recvmsg 400.715MB/s 373.676MB/s 396.276MB/s
BM_Sendmsg 361.832MB/s 333.003MB/s 335.571MB/s
BM_Recvfrom 453.336MB/s 393.321MB/s 381.650MB/s
BM_Sendto 378.052MB/s 372.134MB/s 341.342MB/s
BM_SendmsgTCP/0/1k 353.711MB/s 316.216MB/s 322.747MB/s
BM_SendmsgTCP/0/2k 600.681MB/s 588.776MB/s 565.050MB/s
BM_SendmsgTCP/0/4k 995.301MB/s 888.808MB/s 941.888MB/s
BM_SendmsgTCP/0/8k 1.517GB/s 1.274GB/s 1.345GB/s
BM_SendmsgTCP/0/16k 1.872GB/s 1.586GB/s 1.698GB/s
BM_SendmsgTCP/0/32k 1.017GB/s 1.020GB/s 1.133GB/s
BM_SendmsgTCP/0/64k 475.626MB/s 584.587MB/s 627.027MB/s
BM_SendmsgTCP/0/128k 416.371MB/s 503.434MB/s 409.850MB/s
BM_SendmsgTCP/0/256k 323.449MB/s 449.599MB/s 388.852MB/s
BM_SendmsgTCP/0/512k 243.992MB/s 267.676MB/s 314.474MB/s
BM_SendmsgTCP/0/1M 95.138MB/s 95.874MB/s 95.417MB/s
BM_SendmsgTCP/0/2M 96.261MB/s 94.977MB/s 96.005MB/s
BM_SendmsgTCP/0/4M 96.512MB/s 95.978MB/s 95.370MB/s
BM_SendmsgTCP/0/8M 95.603MB/s 95.541MB/s 94.935MB/s
BM_SendmsgTCP/0/16M 94.598MB/s 94.696MB/s 94.521MB/s
BM_SendmsgTCP/0/32M 94.006MB/s 94.671MB/s 94.768MB/s
BM_SendmsgTCP/0/64M 94.133MB/s 94.333MB/s 94.746MB/s
BM_SendmsgTCP/0/128M 93.615MB/s 93.497MB/s 93.573MB/s
BM_SendmsgTCP/0/256M 93.241MB/s 95.100MB/s 93.272MB/s
BM_SendmsgTCP/1/1k 303.644MB/s 316.074MB/s 308.430MB/s
BM_SendmsgTCP/1/2k 537.093MB/s 584.962MB/s 529.020MB/s
BM_SendmsgTCP/1/4k 882.362MB/s 939.087MB/s 892.285MB/s
BM_SendmsgTCP/1/8k 1.272GB/s 1.394GB/s 1.296GB/s
BM_SendmsgTCP/1/16k 1.802GB/s 2.019GB/s 1.830GB/s
BM_SendmsgTCP/1/32k 2.084GB/s 2.173GB/s 2.156GB/s
BM_SendmsgTCP/1/64k 2.515GB/s 2.463GB/s 2.473GB/s
BM_SendmsgTCP/1/128k 2.811GB/s 3.004GB/s 2.946GB/s
BM_SendmsgTCP/1/256k 3.008GB/s 3.159GB/s 3.171GB/s
BM_SendmsgTCP/1/512k 2.980GB/s 3.150GB/s 3.126GB/s
BM_SendmsgTCP/1/1M 2.165GB/s 2.233GB/s 2.163GB/s
BM_SendmsgTCP/1/2M 2.370GB/s 2.219GB/s 2.453GB/s
BM_SendmsgTCP/1/4M 2.005GB/s 2.091GB/s 2.214GB/s
BM_SendmsgTCP/1/8M 2.111GB/s 2.013GB/s 2.109GB/s
BM_SendmsgTCP/1/16M 1.902GB/s 1.868GB/s 1.897GB/s
BM_SendmsgTCP/1/32M 1.655GB/s 1.665GB/s 1.635GB/s
BM_SendmsgTCP/1/64M 1.575GB/s 1.547GB/s 1.575GB/s
BM_SendmsgTCP/1/128M 1.524GB/s 1.584GB/s 1.580GB/s
BM_SendmsgTCP/1/256M 1.579GB/s 1.607GB/s 1.593GB/s
PiperOrigin-RevId: 278940079
|
|
When VectorisedViews were passed up the stack from packet_dispatchers, we were
passing a sub-slice of the dispatcher's views fields. The dispatchers then
immediately set those views to nil.
This wasn't caught before because every implementer copied the data in these
views before returning.
PiperOrigin-RevId: 277615351
|
|
Currently there are no ABI changes. We should check again closer to release.
PiperOrigin-RevId: 277349744
|
|
Right now, we send each tcp packet separately, we call one system
call per-packet. This patch allows to generate multiple tcp packets
and send them by sendmmsg.
The arguable part of this CL is a way how to handle multiple headers.
This CL adds the next field to the Prepandable buffer.
Nginx test results:
Server Software: nginx/1.15.9
Server Hostname: 10.138.0.2
Server Port: 8080
Document Path: /10m.txt
Document Length: 10485760 bytes
w/o gso:
Concurrency Level: 5
Time taken for tests: 5.491 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 18.21 [#/sec] (mean)
Time per request: 274.525 [ms] (mean)
Time per request: 54.905 [ms] (mean, across all concurrent requests)
Transfer rate: 186508.03 [Kbytes/sec] received
sw-gso:
Concurrency Level: 5
Time taken for tests: 3.852 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 25.96 [#/sec] (mean)
Time per request: 192.576 [ms] (mean)
Time per request: 38.515 [ms] (mean, across all concurrent requests)
Transfer rate: 265874.92 [Kbytes/sec] received
w/o gso:
$ ./tcp_benchmark --client --duration 15 --ideal
[SUM] 0.0-15.1 sec 2.20 GBytes 1.25 Gbits/sec
software gso:
$ tcp_benchmark --client --duration 15 --ideal --gso $((1<<16)) --swgso
[SUM] 0.0-15.1 sec 3.99 GBytes 2.26 Gbits/sec
PiperOrigin-RevId: 276112677
|
|
Like (AF_INET, SOCK_RAW) sockets, AF_PACKET sockets require CAP_NET_RAW. With
runsc, you'll need to pass `--net-raw=true` to enable them.
Binding isn't supported yet.
PiperOrigin-RevId: 275909366
|
|
PiperOrigin-RevId: 274638272
|
|
PiperOrigin-RevId: 272083936
|
|
Previously, the only safe way to use an fdbased endpoint was to leak the FD.
This change makes it possible to safely close the FD.
This is the first step towards having stoppable stacks.
Updates #837
PiperOrigin-RevId: 270346582
|
|
They are no-ops, so the standard rule works fine.
PiperOrigin-RevId: 268776264
|
|
PiperOrigin-RevId: 267709597
|
|
The blockingpoll_unsafe.go was copied to blockingpoll_noyield_unsafe.go
during merging commit 7206202bb9439499. If it still stay here, it would
cause build errors on non-amd64 platform.
ERROR:
pkg/tcpip/link/rawfile/BUILD:5:1:
GoCompilePkg
pkg/tcpip/link/rawfile.a
failed (Exit 1) builder failed: error executing command
bazel-out/host/bin/external/go_sdk/builder compilepkg -sdk
external/go_sdk -installsuffix linux_arm64 -src
pkg/tcpip/link/rawfile/blockingpoll_noyield_unsafe.go -src ...
(remaining 33 argument(s) skipped)
Use --sandbox_debug to see verbose messages from the sandbox
compilepkg: error running subcommand: exit status 2
pkg/tcpip/link/rawfile/blockingpoll_yield_unsafe.go:35:6:
BlockingPoll redeclared in this block
previous declaration at
pkg/tcpip/link/rawfile/blockingpoll_unsafe.go:26:78
Target //pkg/tcpip/link/rawfile:rawfile failed to build
Use --verbose_failures to see the command lines of failed build steps.
INFO: Elapsed time: 25.531s, Critical Path: 21.08s
INFO: 262 processes: 262 linux-sandbox.
FAILED: Build did NOT complete successfully
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I4e21f82984225d0aa173de456f7a7c66053a053e
|
|
PiperOrigin-RevId: 265534854
|
|
PiperOrigin-RevId: 264218306
|
|
Signed-off-by: Haibo Xu haibo.xu@arm.com
Change-Id: Ib6b4aa2db19032e58bf0395f714e6883caee460a
|
|
Signed-off-by: Haibo Xu haibo.xu@arm.com
Change-Id: Id4489554b9caa332695df8793d361f8332f6a13b
|
|
Signed-off-by: Haibo Xu haibo.xu@arm.com
Change-Id: I2376e502c1a860d5e624c8a8e3afab5da4c53022
|
|
This stub had the wrong function signature.
PiperOrigin-RevId: 262992682
|
|
syscall.POLL is not supported on arm64, using syscall.PPOLL
to support both the x86 and arm64. refs #63
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I2c81a063d3ec4e7e6b38fe62f17a0924977f505e
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/543 from xiaobo55x:master ba598263fd3748d1addd48e4194080aa12085164
PiperOrigin-RevId: 260752049
|
|
Addresses obvious typos, in the documentation only.
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65
PiperOrigin-RevId: 255477779
|
|
This test will occasionally fail waiting to read a packet. From repeated runs,
I've seen it up to 1.5s for waitForPackets to complete.
PiperOrigin-RevId: 254484627
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
PiperOrigin-RevId: 252918338
|
|
This allows an fdbased endpoint to have multiple underlying fd's from which
packets can be read and dispatched/written to.
This should allow for higher throughput as well as better scalability of the
network stack as number of connections increases.
Updates #231
PiperOrigin-RevId: 251852825
|
|
PiperOrigin-RevId: 251788534
|
|
Funcion signatures are not validated during compilation. Since
they are not exported, they can change at any time. The guard
ensures that they are verified at least on every version upgrade.
PiperOrigin-RevId: 250733742
|
|
This is in preparation to support an fdbased endpoint that can read/dispatch
packets from multiple underlying fds.
Updates #231
PiperOrigin-RevId: 249337074
Change-Id: Id7d375186cffcf55ae5e38986e7d605a96916d35
|
|
And stop storing the Filesystem in the MountSource.
This allows us to decouple the MountSource filesystem type from the name of the
filesystem.
PiperOrigin-RevId: 247292982
Change-Id: I49cbcce3c17883b7aa918ba76203dfd6d1b03cc8
|
|
Testing:
Unit tests and also large ping in Fuchsia OS
PiperOrigin-RevId: 246563592
Change-Id: Ia12ab619f64f4be2c8d346ce81341a91724aef95
|