Age | Commit message (Collapse) | Author |
|
|
|
...to remove the need for the transport layer to deduce the type of
error it received.
Rename HandleControlPacket to HandleError as HandleControlPacket only
handles errors.
tcpip.SockError now holds a tcpip.SockErrorCause interface that
different errors can implement.
PiperOrigin-RevId: 354994306
|
|
|
|
This makes it possible to add data to types that implement tcpip.Error.
ErrBadLinkEndpoint is removed as it is unused.
PiperOrigin-RevId: 354437314
|
|
|
|
The error messages are not needed or used as these are not processing errors
so much as errors to be reported back to the packet sender. Implicitly
describe whether each error should generate ICMP packets or not. Most do
but there are a couple that do not.
Slightly alter some test expectations for Linux compatibility and add a
couple more. Improve Linux compatibility on error packet returns. Some
cosmetic changes to tests to match the upcoming packet impact version
of the same tests.
PiperOrigin-RevId: 352889785
|
|
|
|
...when performing source address selection for IPv6.
These are defined in RFC 6724 section 5 rule 6 (prefer matching label)
and rule 8 (use longest matching prefix).
This change also considers ULA of global scope instead of its own scope,
as per RFC 6724 section 3.1:
Also, note that ULAs are considered as global, not
site-local, scope but are handled via the prefix policy table as
discussed in Section 10.6.
Test: stack_test.TestIPv6SourceAddressSelectionScope
Startblock:
has LGTM from peterjohnston
and then
add reviewer brunodalbo
PiperOrigin-RevId: 348580996
|
|
Reported-by: syzbot+48c43f82fe7738fceae9@syzkaller.appspotmail.com
PiperOrigin-RevId: 348540796
|
|
PiperOrigin-RevId: 348055514
|
|
PiperOrigin-RevId: 347911316
|
|
RFC 2711 specifies that the router alert's length field is always 2
so we should make sure only 2 bytes are read from a router alert
option's data field.
Test: header.TestIPv6OptionsExtHdrIterErr
PiperOrigin-RevId: 347727876
|
|
|
|
Adds IPv6 extension header serializer and Hop by Hop options serializer.
Add RouterAlert option serializer and use it in MLD.
Fixed #4996
Startblock:
has LGTM from marinaciocea
and then
add reviewer ghanan
PiperOrigin-RevId: 347174537
|
|
|
|
startblock:
has LGTM from peterjohnston
and then
add reviewer ghanan,tamird
PiperOrigin-RevId: 346565589
|
|
|
|
PiperOrigin-RevId: 345701623
|
|
|
|
...as defined by RFC 2710. Querier (router)-side MLDv1 is not yet
supported.
The core state machine is shared with IGMPv2.
This is guarded behind a flag (ipv6.Options.MLDEnabled).
Tests: ip_test.TestMGP*
Bug #4861
PiperOrigin-RevId: 344344095
|
|
|
|
Because the code handles a bad header as "payload" right up to the last moment
we need to make sure payload handling does not remove the error information.
Fixes #4909
PiperOrigin-RevId: 344141690
|
|
|
|
Bug #4682
PiperOrigin-RevId: 343993297
|
|
|
|
Added headers, stats, checksum parsing capabilities from RFC 2236 describing
IGMPv2.
IGMPv2 state machine is implemented for each condition, sending and receiving
IGMP Membership Reports and Leave Group messages with backwards compatibility
with IGMPv1 routers.
Test:
* Implemented igmp header parser and checksum calculator in header/igmp_test.go
* ipv4/igmp_test.go tests incoming and outgoing IGMP messages and pathways.
* Added unit test coverage for IGMPv2 RFC behavior + IGMPv1 backwards
compatibility in ipv4/igmp_test.go.
Fixes #4682
PiperOrigin-RevId: 343408809
|
|
|
|
Preparing for upcoming CLs that add MLD functionality.
Bug #4861
Test: header.TestMLD
PiperOrigin-RevId: 343391556
|
|
|
|
- Pass a PacketBuffer directly instead of releaseCB
- No longer pass a VectorisedView, which is included in the PacketBuffer
- Make it an error if data size is not equal to (last - first + 1)
- Set the callback for the reassembly timeout on NewFragmentation
PiperOrigin-RevId: 342702432
|
|
|
|
PiperOrigin-RevId: 342366891
|
|
|
|
If the packet must no longer be forwarded because its TTL/Hop Limit
reaches 0, send an ICMP Time Exceeded error to the source.
Required as per relevant RFCs. See comments in code for RFC references.
Fixes #1085
Tests:
- ipv4_test.TestForwarding
- ipv6.TestForwarding
PiperOrigin-RevId: 342323610
|
|
|
|
RELNOTES: n/a
PiperOrigin-RevId: 342176296
|
|
|
|
Add a unit test for ipv4.Encode and a round trip test.
PiperOrigin-RevId: 342169517
|
|
|
|
Most packets don't have options but they are an integral part of the
standard. Teaching the ipv4 code how to handle them will simplify future
testing and use. Because Options are so rare it is worth making sure
that the extra work is kept out of the fast path as much as possible.
Prior to this change, all usages of the IHL field of the IPv4Fields/Encode
system set it to the same constant value except in a couple of tests
for bad values. From this change IHL will not be a constant as it will
depend on the size of any Options. Since ipv4.Encode() now handles the
options it becomes a possible source of errors to let the callers set
this value, so remove it entirely and calculate the value from the size
of the Options if present (or not) therefore guaranteeing a correct value.
Fixes #4709
RELNOTES: n/a
PiperOrigin-RevId: 341864765
|
|
|
|
In the docker container, the ipv6 loopback address is not set,
and connect("::1") has to return ENEADDRNOTAVAIL in this case.
Without this fix, it returns EHOSTUNREACH.
PiperOrigin-RevId: 340002915
|
|
|
|
IPv4 options extend the size of the IP header and have a basic known
format. The framework can process that format without needing to know
about every possible option. We can add more code to handle additional
option types as we need them. Bad options or mangled option entries
can result in ICMP Parameter Problem packets. The first types we
support are the Timestamp option and the Record Route option, included
in this change.
The options are processed at several points in the packet flow within
the Network stack, with slightly different requirements. The framework
includes a mechanism to control this at each point. Support has been
added for such points which are only present in upcoming CLs such as
during packet forwarding and fragmentation.
With this change, 'ping -R' and 'ping -T' work against gVisor and Fuchsia.
$ ping -R 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(124) bytes of data.
64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.990 ms
NOP
RR: 192.168.1.1
192.168.1.2
192.168.1.1
$ ping -T tsprespec 192.168.1.2 192.168.1.1 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(124) bytes of data.
64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=1.20 ms
TS: 192.168.1.2 71486821 absolute
192.168.1.1 746
Unit tests included for generic options, Timestamp options
and Record Route options.
PiperOrigin-RevId: 339379076
|
|
|
|
Fixes #4427, #4428
PiperOrigin-RevId: 338805047
|
|
|
|
Also enforce the minimum MTU for IPv4 and IPv6, and discard packets if the
minimum is not met.
PiperOrigin-RevId: 338404225
|
|
|
|
Remove the duplicate NA size variable while I'm here.
See https://tools.ietf.org/html/rfc4861#section-4.4 for the packet format.
PiperOrigin-RevId: 336943206
|