Age | Commit message (Collapse) | Author |
|
IPv4 options extend the size of the IP header and have a basic known
format. The framework can process that format without needing to know
about every possible option. We can add more code to handle additional
option types as we need them. Bad options or mangled option entries
can result in ICMP Parameter Problem packets. The first types we
support are the Timestamp option and the Record Route option, included
in this change.
The options are processed at several points in the packet flow within
the Network stack, with slightly different requirements. The framework
includes a mechanism to control this at each point. Support has been
added for such points which are only present in upcoming CLs such as
during packet forwarding and fragmentation.
With this change, 'ping -R' and 'ping -T' work against gVisor and Fuchsia.
$ ping -R 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(124) bytes of data.
64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.990 ms
NOP
RR: 192.168.1.1
192.168.1.2
192.168.1.1
$ ping -T tsprespec 192.168.1.2 192.168.1.1 192.168.1.2
PING 192.168.1.2 (192.168.1.2) 56(124) bytes of data.
64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=1.20 ms
TS: 192.168.1.2 71486821 absolute
192.168.1.1 746
Unit tests included for generic options, Timestamp options
and Record Route options.
PiperOrigin-RevId: 339379076
|
|
Fixes #4427, #4428
PiperOrigin-RevId: 338805047
|
|
Also enforce the minimum MTU for IPv4 and IPv6, and discard packets if the
minimum is not met.
PiperOrigin-RevId: 338404225
|
|
Remove the duplicate NA size variable while I'm here.
See https://tools.ietf.org/html/rfc4861#section-4.4 for the packet format.
PiperOrigin-RevId: 336943206
|
|
PiperOrigin-RevId: 336339194
|
|
PiperOrigin-RevId: 336304024
|
|
When a response needs to be sent to an incoming packet, the stack should
consult its neighbour table to determine the remote address's link
address.
When an entry does not exist in the stack's neighbor table, the stack
should queue the packet while link resolution completes. See comments.
PiperOrigin-RevId: 336185457
|
|
...per RFC 4861 s7.1.1.
PiperOrigin-RevId: 335742851
|
|
The IPv4 RFCs are specific (though obtuse) that an echo response
packet needs to contain all the options from the echo request,
much as if it been routed back to the sender, though apparently
with a new TTL. They suggest copying the incoming packet header
to achieve this so that is what this patch does.
PiperOrigin-RevId: 335559176
|
|
Add code in IPv6 to send ICMP packets while processing extension headers.
Add some accounting in processing IPV6 Extension headers which
allows us to report meaningful information back in ICMP parameter
problem packets.
IPv4 also needs to send a message when an unsupported protocol
is requested.
Add some tests to generate both ipv4 and ipv6 packets with
various errors and check the responses.
Add some new checkers and cleanup some inconsistencies in
the messages in that file.
Add new error types for the ICMPv4/6 generators.
Fix a bug in the ICMPv4 generator that stopped it from generating
"Unknown protocol" messages.
Updates #2211
PiperOrigin-RevId: 334661716
|
|
PiperOrigin-RevId: 334535896
|
|
Store transport protocol number on packet buffers for use in ICMP error
generation.
Updates #2211.
PiperOrigin-RevId: 333252762
|
|
Extract parsing utilities so they can be used by the sniffer.
Fixes #3930
PiperOrigin-RevId: 332401880
|
|
IPv4 can accept 65536-octet reassembled packets.
Test:
- ipv4_test.TestInvalidFragments
- ipv4_test.TestReceiveFragments
- ipv6.TestInvalidIPv6Fragments
- ipv6.TestReceiveIPv6Fragments
Fixes #3770
PiperOrigin-RevId: 331382977
|
|
This is a preparatory commit for a larger commit working on
ICMP generation in error cases.
This is removal of technical debt and cleanup in the gvisor code
as part of gvisor issue 2211.
Updates #2211.
PiperOrigin-RevId: 326615389
|
|
Netstack's TIME-WAIT state for a TCP socket could be terminated prematurely if
the socket entered TIME-WAIT using shutdown(..., SHUT_RDWR) and then was closed
using close(). This fixes that bug and updates the tests to verify that Netstack
correctly honors TIME-WAIT under such conditions.
Fixes #3106
PiperOrigin-RevId: 326456443
|
|
Test:
- stack_test.TestJoinLeaveMulticastOnNICEnableDisable
- integration_test.TestIncomingMulticastAndBroadcast
PiperOrigin-RevId: 325185259
|
|
Previously, ICMP destination unreachable datagrams were ignored by TCP
endpoints. This caused connect to hang when an intermediate router
couldn't find a route to the host.
This manifested as a Kokoro error when Docker IPv6 was enabled. The Ruby
image test would try to install the sinatra gem and hang indefinitely
attempting to use an IPv6 address.
Fixes #3079.
|
|
PiperOrigin-RevId: 321620517
|
|
gVisor incorrectly returns the wrong ARP type for SIOGIFHWADDR. This breaks
tcpdump as it tries to interpret the packets incorrectly.
Similarly, SIOCETHTOOL is used by tcpdump to query interface properties which
fails with an EINVAL since we don't implement it. For now change it to return
EOPNOTSUPP to indicate that we don't support the query rather than return
EINVAL.
NOTE: ARPHRD types for link endpoints are distinct from NIC capabilities
and NIC flags. In Linux all 3 exist eg. ARPHRD types are stored in dev->type
field while NIC capabilities are more like the device features which can be
queried using SIOCETHTOOL but not modified and NIC Flags are fields that can
be modified from user space. eg. NIC status (UP/DOWN/MULTICAST/BROADCAST) etc.
Updates #2746
PiperOrigin-RevId: 321436525
|
|
PiperOrigin-RevId: 321053634
|
|
Netstack has traditionally parsed headers on-demand as a packet moves up the
stack. This is conceptually simple and convenient, but incompatible with
iptables, where headers can be inspected and mangled before even a routing
decision is made.
This changes header parsing to happen early in the incoming packet path, as soon
as the NIC gets the packet from a link endpoint. Even if an invalid packet is
found (e.g. a TCP header of insufficient length), the packet is passed up the
stack for proper stats bookkeeping.
PiperOrigin-RevId: 315179302
|
|
If there is a Timestamps option in the arriving segment and SEG.TSval
< TS.Recent and if TS.Recent is valid, then treat the arriving segment
as not acceptable: Send an acknowledgement in reply as specified in
RFC-793 page 69 and drop the segment.
https://tools.ietf.org/html/rfc1323#page-19
PiperOrigin-RevId: 312590678
|
|
This fixed the corresponding packetimpact test.
PiperOrigin-RevId: 310593470
|
|
Connection tracking is used to track packets in prerouting and
output hooks of iptables. The NAT rules modify the tuples in
connections. The connection tracking code modifies the packets by
looking at the modified tuples.
|
|
PiperOrigin-RevId: 308940886
|
|
Support generating temporary (short-lived) IPv6 SLAAC addresses to
address privacy concerns outlined in RFC 4941.
Tests:
- stack_test.TestAutoGenTempAddr
- stack_test.TestNoAutoGenTempAddrForLinkLocal
- stack_test.TestAutoGenTempAddrRegen
- stack_test.TestAutoGenTempAddrRegenTimerUpdates
- stack_test.TestNoAutoGenTempAddrWithoutStableAddr
- stack_test.TestAutoGenAddrInResponseToDADConflicts
PiperOrigin-RevId: 308915566
|
|
Tested:
When run on Linux, a correct ICMPv6 response is received. On netstack, no
ICMPv6 response is received.
PiperOrigin-RevId: 308343113
|
|
Inform the netstack integrator when the netstack receives an NDP Router
Advertisement message with the NDP DNS Search List option with at least
one domain name. The stack will not maintain any state related to the
search list - the integrator is expected to maintain any required state
and invalidate domain names after their lifetime expires, or refresh the
lifetime when a new one is received for a known domain name.
Test:
- header_test.TestNDPDNSSearchListOption
- header_test.TestNDPDNSSearchListOptionSerialize
- header_test.TestNDPSearchListOptionDomainNameLabelInvalidSymbols
- header_test.TestNDPOptionsIterCheck
- stack_test.TestNDPDNSSearchListDispatch
PiperOrigin-RevId: 307109375
|
|
Test: header_test.TestNDPOptionsIterCheck
PiperOrigin-RevId: 306953867
|
|
Updates #2243
|
|
Test:
- header_test.TestIPv6ExtHdrIter
- ipv6_test.TestReceiveIPv6Fragments
Updates #2197, #2333
PiperOrigin-RevId: 305330178
|
|
As per RFC 6980 section 5, nodes MUST silently ignore NDP messages if
the packet carrying them include an IPv6 Fragmentation Header.
Test: ipv6_test.TestNDPValidation
PiperOrigin-RevId: 304519379
|
|
PiperOrigin-RevId: 304098611
|
|
Enables handling the Hop by Hop and Destination Options extension
headers, but options are not yet supported. All options will be
treated as unknown and their respective action will be followed.
Note, the stack does not yet support sending ICMPv6 error messages in
response to options that cannot be handled/parsed. That will come
in a later change (Issue #2211).
Tests:
- header_test.TestIPv6UnknownExtHdrOption
- header_test.TestIPv6OptionsExtHdrIterErr
- header_test.TestIPv6OptionsExtHdrIter
- ipv6_test.TestReceiveIPv6ExtHdrs
PiperOrigin-RevId: 303433085
|
|
Enables the reassembly of fragmented IPv6 packets and handling of the
Routing extension header with a Segments Left value of 0. Atomic
fragments are handled as described in RFC 6946 to not interfere with
"normal" fragment traffic. No specific routing header type is supported.
Note, the stack does not yet support sending ICMPv6 error messages in
response to IPv6 packets that cannot be handled/parsed. That will come
in a later change (Issue #2211).
Test:
- header_test.TestIPv6RoutingExtHdr
- header_test.TestIPv6FragmentExtHdr
- header_test.TestIPv6ExtHdrIterErr
- header_test.TestIPv6ExtHdrIter
- ipv6_test.TestReceiveIPv6ExtHdrs
- ipv6_test.TestReceiveIPv6Fragments
RELNOTES: n/a
PiperOrigin-RevId: 303189584
|
|
PiperOrigin-RevId: 301382690
|
|
PiperOrigin-RevId: 300668506
|
|
Tests:
- header_test.TestIsV6LinkLocalMulticastAddress
- header_test.TestScopeForIPv6Address
- stack_test.TestIPv6SourceAddressSelectionScopeAndSameAddress
PiperOrigin-RevId: 297215576
|
|
As per RFC 2464 section 7, an IPv6 packet with a multicast destination
address is transmitted to the mapped Ethernet multicast address.
Test:
- ipv6.TestLinkResolution
- stack_test.TestDADResolve
- stack_test.TestRouterSolicitation
PiperOrigin-RevId: 292610529
|
|
Test: header.TestEthernetAddressFromMulticastIPAddress
PiperOrigin-RevId: 292604649
|
|
Test: stack_test.TestDADResolve
PiperOrigin-RevId: 292003124
|
|
Tests:
- header.TestNDPSourceLinkLayerAddressOptionEthernetAddress
- header.TestNDPSourceLinkLayerAddressOptionSerialize
- header.TestNDPOptionsIterCheck
- header.TestNDPOptionsIter
PiperOrigin-RevId: 291856429
|
|
Fixes #1656
PiperOrigin-RevId: 291777279
|
|
PiperOrigin-RevId: 291745021
|
|
Fixes #1656
PiperOrigin-RevId: 291703760
|
|
Checksum computation is one of the most expensive bits of
packet processing. Manual unrolling of the loop provides
significant improvement in checksum speed.
Updates #1656
BenchmarkChecksum/checksum_64-12 49834124 23.6 ns/op
BenchmarkChecksum/checksum_128-12 27111997 44.1 ns/op
BenchmarkChecksum/checksum_256-12 11416683 91.5 ns/op
BenchmarkChecksum/checksum_512-12 6375298 174 ns/op
BenchmarkChecksum/checksum_1024-12 3403852 338 ns/op
BenchmarkChecksum/checksum_1500-12 2343576 493 ns/op
BenchmarkChecksum/checksum_2048-12 1730521 656 ns/op
BenchmarkChecksum/checksum_4096-12 920469 1327 ns/op
BenchmarkChecksum/checksum_8192-12 445885 2637 ns/op
BenchmarkChecksum/checksum_16384-12 226342 5268 ns/op
BenchmarkChecksum/checksum_32767-12 114210 10503 ns/op
BenchmarkChecksum/checksum_32768-12 99138 10610 ns/op
BenchmarkChecksum/checksum_65535-12 53438 21158 ns/op
BenchmarkChecksum/checksum_65536-12 52993 21067 ns/op
BenchmarkUnrolledChecksum/checksum_64-12 61035639 19.1 ns/op
BenchmarkUnrolledChecksum/checksum_128-12 36067015 33.6 ns/op
BenchmarkUnrolledChecksum/checksum_256-12 19731220 60.4 ns/op
BenchmarkUnrolledChecksum/checksum_512-12 9091291 116 ns/op
BenchmarkUnrolledChecksum/checksum_1024-12 4976406 226 ns/op
BenchmarkUnrolledChecksum/checksum_1500-12 3685224 328 ns/op
BenchmarkUnrolledChecksum/checksum_2048-12 2579108 447 ns/op
BenchmarkUnrolledChecksum/checksum_4096-12 1350475 887 ns/op
BenchmarkUnrolledChecksum/checksum_8192-12 658248 1780 ns/op
BenchmarkUnrolledChecksum/checksum_16384-12 335869 3534 ns/op
BenchmarkUnrolledChecksum/checksum_32767-12 168650 7095 ns/op
BenchmarkUnrolledChecksum/checksum_32768-12 168075 7098 ns/op
BenchmarkUnrolledChecksum/checksum_65535-12 75085 14277 ns/op
BenchmarkUnrolledChecksum/checksum_65536-12 75921 14127 ns/op
PiperOrigin-RevId: 291643290
|
|
This change adds support to send NDP Router Solicitation messages when a NIC
becomes enabled as a host, as per RFC 4861 section 6.3.7.
Note, Router Solicitations will only be sent when the stack has forwarding
disabled.
Tests: Unittests to make sure that the initial Router Solicitations are sent
as configured. The tests also validate the sent Router Solicitations' fields.
PiperOrigin-RevId: 289964095
|
|
Do Source Address Selection when choosing an IPv6 source address as per RFC 6724
section 5 rules 1-3:
1) Prefer same address
2) Prefer appropriate scope
3) Avoid deprecated addresses.
A later change will update Source Address Selection to follow rules 4-8.
Tests:
Rule 1 & 2: stack.TestIPv6SourceAddressSelectionScopeAndSameAddress,
Rule 3: stack.TestAutoGenAddrTimerDeprecation,
stack.TestAutoGenAddrDeprecateFromPI
PiperOrigin-RevId: 289559373
|
|
Pass the NIC-internal name to the NIC name function when generating opaque IIDs
so implementations can use the name that was provided when the NIC was created.
Previously, explicit NICID to NIC name resolution was required from the netstack
integrator.
Tests: Test that the name provided when creating a NIC is passed to the NIC name
function when generating opaque IIDs.
PiperOrigin-RevId: 288395359
|