Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 345701623
|
|
Added headers, stats, checksum parsing capabilities from RFC 2236 describing
IGMPv2.
IGMPv2 state machine is implemented for each condition, sending and receiving
IGMP Membership Reports and Leave Group messages with backwards compatibility
with IGMPv1 routers.
Test:
* Implemented igmp header parser and checksum calculator in header/igmp_test.go
* ipv4/igmp_test.go tests incoming and outgoing IGMP messages and pathways.
* Added unit test coverage for IGMPv2 RFC behavior + IGMPv1 backwards
compatibility in ipv4/igmp_test.go.
Fixes #4682
PiperOrigin-RevId: 343408809
|
|
Preparing for upcoming CLs that add MLD functionality.
Bug #4861
Test: header.TestMLD
PiperOrigin-RevId: 343391556
|
|
PiperOrigin-RevId: 321053634
|
|
Test: header_test.TestNDPOptionsIterCheck
PiperOrigin-RevId: 306953867
|
|
Enables the reassembly of fragmented IPv6 packets and handling of the
Routing extension header with a Segments Left value of 0. Atomic
fragments are handled as described in RFC 6946 to not interfere with
"normal" fragment traffic. No specific routing header type is supported.
Note, the stack does not yet support sending ICMPv6 error messages in
response to IPv6 packets that cannot be handled/parsed. That will come
in a later change (Issue #2211).
Test:
- header_test.TestIPv6RoutingExtHdr
- header_test.TestIPv6FragmentExtHdr
- header_test.TestIPv6ExtHdrIterErr
- header_test.TestIPv6ExtHdrIter
- ipv6_test.TestReceiveIPv6ExtHdrs
- ipv6_test.TestReceiveIPv6Fragments
RELNOTES: n/a
PiperOrigin-RevId: 303189584
|
|
PiperOrigin-RevId: 291745021
|
|
This change adds support to send NDP Router Solicitation messages when a NIC
becomes enabled as a host, as per RFC 4861 section 6.3.7.
Note, Router Solicitations will only be sent when the stack has forwarding
disabled.
Tests: Unittests to make sure that the initial Router Solicitations are sent
as configured. The tests also validate the sent Router Solicitations' fields.
PiperOrigin-RevId: 289964095
|
|
Support generating opaque interface identifiers as defined by RFC 7217 for
auto-generated IPv6 link-local addresses. Opaque interface identifiers will also
be used for IPv6 addresses auto-generated via SLAAC in a later change.
Note, this change does not handle retries in response to DAD conflicts yet.
That will also come in a later change.
Tests: Test that when configured to generated opaque IIDs, they are properly
generated as outlined by RFC 7217.
PiperOrigin-RevId: 288035349
|
|
Fixed a bug where the interface identifier was not properly generated from an
Ethernet address.
Tests: Unittests to make sure the functions generating the EUI64 interface
identifier are correct.
PiperOrigin-RevId: 285494562
|
|
This change adds a type to represent the NDP Recursive DNS Server option, as
defined by RFC 8106 section 5.1.
PiperOrigin-RevId: 284005493
|
|
This change is in preparation for NDP Router Discovery where the stack will need
to handle NDP Router Advertisments.
Tests: Test that given an NDP Router Advertisement buffer (body of an ICMPv6
packet, correct values are returned by the field getters).
PiperOrigin-RevId: 276146817
|
|
Right now, we send each tcp packet separately, we call one system
call per-packet. This patch allows to generate multiple tcp packets
and send them by sendmmsg.
The arguable part of this CL is a way how to handle multiple headers.
This CL adds the next field to the Prepandable buffer.
Nginx test results:
Server Software: nginx/1.15.9
Server Hostname: 10.138.0.2
Server Port: 8080
Document Path: /10m.txt
Document Length: 10485760 bytes
w/o gso:
Concurrency Level: 5
Time taken for tests: 5.491 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 18.21 [#/sec] (mean)
Time per request: 274.525 [ms] (mean)
Time per request: 54.905 [ms] (mean, across all concurrent requests)
Transfer rate: 186508.03 [Kbytes/sec] received
sw-gso:
Concurrency Level: 5
Time taken for tests: 3.852 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 25.96 [#/sec] (mean)
Time per request: 192.576 [ms] (mean)
Time per request: 38.515 [ms] (mean, across all concurrent requests)
Transfer rate: 265874.92 [Kbytes/sec] received
w/o gso:
$ ./tcp_benchmark --client --duration 15 --ideal
[SUM] 0.0-15.1 sec 2.20 GBytes 1.25 Gbits/sec
software gso:
$ tcp_benchmark --client --duration 15 --ideal --gso $((1<<16)) --swgso
[SUM] 0.0-15.1 sec 3.99 GBytes 2.26 Gbits/sec
PiperOrigin-RevId: 276112677
|
|
This change adds support for optionally auto-generating an IPv6 link-local
address based on the NIC's MAC Address on NIC enable.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that a link-local
address will not be auto-generated unless the stack is explicitly configured.
See `stack.Options` for more details. Specifically, see
`stack.Options.AutoGenIPv6LinkLocal`.
Tests: Tests to make sure that the IPb6 link-local address is only
auto-generated if the stack is specifically configured to do so. Also tests to
make sure that an auto-generated address goes through the DAD process.
PiperOrigin-RevId: 276059813
|
|
This change adds support for Duplicate Address Detection on IPv6 addresses
as defined by RFC 4862 section 5.4.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that DAD will not be
performed. See `stack.Options` and `stack.NDPConfigurations` for more details.
Tests: Tests to make sure that the DAD process properly resolves or fails.
That is, tests make sure that DAD resolves only if:
- No other node is performing DAD for the same address
- No other node owns the same address
PiperOrigin-RevId: 275189471
|
|
PiperOrigin-RevId: 274672346
|
|
They are no-ops, so the standard rule works fine.
PiperOrigin-RevId: 268776264
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
|
|
PiperOrigin-RevId: 220866996
Change-Id: I89d48215df57c00d6a6ec512fc18712a2ea9080b
|
|
PiperOrigin-RevId: 220185891
Change-Id: Iaea73fd7b2fa8c399b989cdcaabf4885f370df4b
|
|
PiperOrigin-RevId: 207125440
Change-Id: I6c572afb4d693ee72a0c458a988b0e96d191cd49
|
|
PiperOrigin-RevId: 207037226
Change-Id: I8b5f1a056d4f3eab17846f2e0193bb737ecb5428
|
|
PiperOrigin-RevId: 207007153
Change-Id: Ifedf1cc3758dc18be16647a4ece9c840c1c636c9
|
|
We have been unnecessarily creating too many savable types implicitly.
PiperOrigin-RevId: 206334201
Change-Id: Idc5a3a14bfb7ee125c4f2bb2b1c53164e46f29a8
|
|
Fixes #27
PiperOrigin-RevId: 203825288
Change-Id: Ie9f3a2b2c1e296b026b024f75c07da1a7e118633
|
|
PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
|