summaryrefslogtreecommitdiffhomepage
path: root/pkg/tcpip/checker/checker.go
AgeCommit message (Collapse)Author
2020-11-13Decrement TTL/Hop Limit when forwarding IP packetsGhanan Gowripalan
If the packet must no longer be forwarded because its TTL/Hop Limit reaches 0, send an ICMP Time Exceeded error to the source. Required as per relevant RFCs. See comments in code for RFC references. Fixes #1085 Tests: - ipv4_test.TestForwarding - ipv6.TestForwarding PiperOrigin-RevId: 342323610
2020-11-11Teach netstack how to add options to IPv4 packetsJulian Elischer
Most packets don't have options but they are an integral part of the standard. Teaching the ipv4 code how to handle them will simplify future testing and use. Because Options are so rare it is worth making sure that the extra work is kept out of the fast path as much as possible. Prior to this change, all usages of the IHL field of the IPv4Fields/Encode system set it to the same constant value except in a couple of tests for bad values. From this change IHL will not be a constant as it will depend on the size of any Options. Since ipv4.Encode() now handles the options it becomes a possible source of errors to let the callers set this value, so remove it entirely and calculate the value from the size of the Options if present (or not) therefore guaranteeing a correct value. Fixes #4709 RELNOTES: n/a PiperOrigin-RevId: 341864765
2020-10-27Add support for Timestamp and RecordRoute IP optionsJulian Elischer
IPv4 options extend the size of the IP header and have a basic known format. The framework can process that format without needing to know about every possible option. We can add more code to handle additional option types as we need them. Bad options or mangled option entries can result in ICMP Parameter Problem packets. The first types we support are the Timestamp option and the Record Route option, included in this change. The options are processed at several points in the packet flow within the Network stack, with slightly different requirements. The framework includes a mechanism to control this at each point. Support has been added for such points which are only present in upcoming CLs such as during packet forwarding and fragmentation. With this change, 'ping -R' and 'ping -T' work against gVisor and Fuchsia. $ ping -R 192.168.1.2 PING 192.168.1.2 (192.168.1.2) 56(124) bytes of data. 64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.990 ms NOP RR: 192.168.1.1 192.168.1.2 192.168.1.1 $ ping -T tsprespec 192.168.1.2 192.168.1.1 192.168.1.2 PING 192.168.1.2 (192.168.1.2) 56(124) bytes of data. 64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=1.20 ms TS: 192.168.1.2 71486821 absolute 192.168.1.1 746 Unit tests included for generic options, Timestamp options and Record Route options. PiperOrigin-RevId: 339379076
2020-10-24Send ICMP error message if IP fragment reassembly failsToshi Kikuchi
Fixes #4427, #4428 PiperOrigin-RevId: 338805047
2020-10-16Enable IPv6 WriteHeaderIncludedPacketGhanan Gowripalan
Allow writing an IPv6 packet where the IPv6 header is a provided by the user. * Introduce an error to let callers know a header is malformed. We previously useed tcpip.ErrInvalidOptionValue but that did not seem appropriate for generic malformed header errors. * Populate network header in WriteHeaderIncludedPacket IPv4's implementation of WriteHeaderIncludedPacket did not previously populate the packet buffer's network header. This change fixes that. Fixes #4527 Test: ip_test.TestWriteHeaderIncludedPacket PiperOrigin-RevId: 337534548
2020-10-05Fix IPv4 ICMP echo handler to copy optionsJulian Elischer
The IPv4 RFCs are specific (though obtuse) that an echo response packet needs to contain all the options from the echo request, much as if it been routed back to the sender, though apparently with a new TTL. They suggest copying the incoming packet header to achieve this so that is what this patch does. PiperOrigin-RevId: 335559176
2020-09-30Use the ICMP error response facilityJulian Elischer
Add code in IPv6 to send ICMP packets while processing extension headers. Add some accounting in processing IPV6 Extension headers which allows us to report meaningful information back in ICMP parameter problem packets. IPv4 also needs to send a message when an unsupported protocol is requested. Add some tests to generate both ipv4 and ipv6 packets with various errors and check the responses. Add some new checkers and cleanup some inconsistencies in the messages in that file. Add new error types for the ICMPv4/6 generators. Fix a bug in the ICMPv4 generator that stopped it from generating "Unknown protocol" messages. Updates #2211 PiperOrigin-RevId: 334661716
2020-09-24Change segment/pending queue to use receive buffer limits.Bhasker Hariharan
segment_queue today has its own standalone limit of MaxUnprocessedSegments but this can be a problem in UnlockUser() we do not release the lock till there are segments to be processed. What can happen is as handleSegments dequeues packets more keep getting queued and we will never release the lock. This can keep happening even if the receive buffer is full because nothing can read() till we release the lock. Further having a separate limit for pending segments makes it harder to track memory usage etc. Unifying the limits makes it easier to reason about memory in use and makes the overall buffer behaviour more consistent. PiperOrigin-RevId: 333508122
2020-08-14Give the ICMP Code its own typeJulian Elischer
This is a preparatory commit for a larger commit working on ICMP generation in error cases. This is removal of technical debt and cleanup in the gvisor code as part of gvisor issue 2211. Updates #2211. PiperOrigin-RevId: 326615389
2020-08-10Populate IPPacketInfo with destination addressGhanan Gowripalan
IPPacketInfo.DestinationAddr should hold the destination of the IP packet, not the source. This change fixes that bug. PiperOrigin-RevId: 325910766
2020-06-26Implement SO_NO_CHECK socket option.gVisor bot
SO_NO_CHECK is used to skip the UDP checksum generation on a TX socket (UDP checksum is optional on IPv4). Test: - TestNoChecksum - SoNoCheckOffByDefault (UdpSocketTest) - SoNoCheck (UdpSocketTest) Fixes #3055 PiperOrigin-RevId: 318575215
2020-04-14Reduce flakiness in tcp_test.Bhasker Hariharan
Tests now use a MinRTO of 3s instead of default 200ms. This reduced flakiness in a lot of the congestion control/recovery tests which were flaky due to retransmit timer firing too early in case the test executors were overloaded. This change also bumps some of the timeouts in tests which were too sensitive to timer variations and reduces the number of slow start iterations which can make the tests run for too long and also trigger retansmit timeouts etc if the executor is overloaded. PiperOrigin-RevId: 306562645
2020-04-09Drop invalid NDP NS messagesGhanan Gowripalan
Better validate NDP NS messages and their options before doing work in response to them. Also make sure that NA messages sent in response to an NS use the correct IPv6 and link-layer addresses so they are routed properly and received by the right node. Test: stack_test.TestNeighorSolicitationResponse PiperOrigin-RevId: 305799054
2020-03-06Specify the source of outgoing NDP RSGhanan Gowripalan
If the NIC has a valid IPv6 address assigned, use it as the source address for outgoing NDP Router Solicitation packets. Test: stack_test.TestRouterSolicitation PiperOrigin-RevId: 299398763
2020-02-18Enable IPV6_RECVTCLASS socket option for datagram socketsgVisor bot
Added the ability to get/set the IP_RECVTCLASS socket option on UDP endpoints. If enabled, traffic class from the incoming Network Header passed as ancillary data in the ControlMessages. Adding Get/SetSockOptBool to decrease the overhead of getting/setting simple options. (This was absorbed in a CL that will be landing before this one). Test: * Added unit test to udp_test.go that tests getting/setting as well as verifying that we receive expected TOS from incoming packet. * Added a syscall test for verifying getting/setting * Removed test skip for existing syscall test to enable end to end test. PiperOrigin-RevId: 295840218
2020-01-28Include the NDP Source Link Layer option when sending DAD messagesGhanan Gowripalan
Test: stack_test.TestDADResolve PiperOrigin-RevId: 292003124
2020-01-15Solicit IPv6 routers when a NIC becomes enabled as a hostGhanan Gowripalan
This change adds support to send NDP Router Solicitation messages when a NIC becomes enabled as a host, as per RFC 4861 section 6.3.7. Note, Router Solicitations will only be sent when the stack has forwarding disabled. Tests: Unittests to make sure that the initial Router Solicitations are sent as configured. The tests also validate the sent Router Solicitations' fields. PiperOrigin-RevId: 289964095
2020-01-14Implement {g,s}etsockopt(IP_RECVTOS) for UDP socketsTamir Duberstein
PiperOrigin-RevId: 289718534
2019-12-26Automated rollback of changelist 287029703gVisor bot
PiperOrigin-RevId: 287217899
2019-12-24Enable IP_RECVTOS socket option for datagram socketsRyan Heacock
Added the ability to get/set the IP_RECVTOS socket option on UDP endpoints. If enabled, TOS from the incoming Network Header passed as ancillary data in the ControlMessages. Test: * Added unit test to udp_test.go that tests getting/setting as well as verifying that we receive expected TOS from incoming packet. * Added a syscall test PiperOrigin-RevId: 287029703
2019-10-25Validate the checksum for incoming ICMPv6 packetsGhanan Gowripalan
This change validates the ICMPv6 checksum field before further processing an ICMPv6 packet. Tests: Unittests to make sure that only ICMPv6 packets with a valid checksum are accepted/processed. Existing tests using checker.ICMPv6 now also check the ICMPv6 checksum field. PiperOrigin-RevId: 276779148
2019-10-16Do Duplicate Address Detection on permanent IPv6 addresses.Ghanan Gowripalan
This change adds support for Duplicate Address Detection on IPv6 addresses as defined by RFC 4862 section 5.4. Note, this change will not break existing uses of netstack as the default configuration for the stack options is set in such a way that DAD will not be performed. See `stack.Options` and `stack.NDPConfigurations` for more details. Tests: Tests to make sure that the DAD process properly resolves or fails. That is, tests make sure that DAD resolves only if: - No other node is performing DAD for the same address - No other node owns the same address PiperOrigin-RevId: 275189471
2019-09-03Make UDP traceroute work.Bhasker Hariharan
Adds support to generate Port Unreachable messages for UDP datagrams received on a port for which there is no valid endpoint. Fixes #703 PiperOrigin-RevId: 267034418
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-09-12Always pass buffer.VectorisedView by valueTamir Duberstein
PiperOrigin-RevId: 212757571 Change-Id: I04200df9e45c21eb64951cd2802532fa84afcb1a
2018-09-12Add multicast supportTamir Duberstein
PiperOrigin-RevId: 212750821 Change-Id: I822fd63e48c684b45fd91f9ce057867b7eceb792
2018-07-09Switch netstack licenses to Apache 2.0.Nicolas Lacasse
Fixes #27 PiperOrigin-RevId: 203825288 Change-Id: Ie9f3a2b2c1e296b026b024f75c07da1a7e118633
2018-04-28Check in gVisor.Googler
PiperOrigin-RevId: 194583126 Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 01:49:20 +0000