| Age | Commit message (Collapse) | Author |
|---|
|
Update the following from syserror to the linuxerr equivalent:
EEXIST
EFAULT
ENOTDIR
ENOTTY
EOPNOTSUPP
ERANGE
ESRCH
PiperOrigin-RevId: 384329869
|
|
Update/remove most syserror errors to linuxerr equivalents. For list
of removed errors, see //pkg/syserror/syserror.go.
PiperOrigin-RevId: 382574582
|
|
Update all instances of the above errors to the faster linuxerr implementation.
With the temporary linuxerr.Equals(), no logical changes are made.
PiperOrigin-RevId: 382306655
|
|
Remove three syserror entries duplicated in linuxerr. Because of the
linuxerr.Equals method, this is a mere change of return values from
syserror to linuxerr definitions.
Done with only these three errnos as CLs removing all grow to a significantly
large size.
PiperOrigin-RevId: 382173835
|
|
Add linuxerr package to replace syserror and syserr errors. This is done
to improve performance comparing/returning errors to on par with
syscall.Errno.
The below linuxerr_test (formerly syserror_test) shows linuxerr.Error
on par with unix.Error (syscall.Errno) as desired.
BenchmarkAssignErrno
BenchmarkAssignErrno-6 1000000000 0.6291 ns/op
BenchmarkLinuxerrAssignError
BenchmarkLinuxerrAssignError-6 1000000000 0.5808 ns/op
BenchmarkAssignSyserrorError
BenchmarkAssignSyserrorError-6 1000000000 0.6188 ns/op
BenchmarkCompareErrno
BenchmarkCompareErrno-6 1000000000 0.5041 ns/op
BenchmarkCompareLinuxerrError
BenchmarkCompareLinuxerrError-6 1000000000 0.4660 ns/op
BenchmarkCompareSyserrorError
BenchmarkCompareSyserrorError-6 309026907 3.386 ns/op
BenchmarkSwitchErrno
BenchmarkSwitchErrno-6 722253750 1.440 ns/op
BenchmarkSwitchLinuxerrError
BenchmarkSwitchLinuxerrError-6 709108542 1.453 ns/op
BenchmarkSwitchSyserrorError
BenchmarkSwitchSyserrorError-6 106331331 11.21 ns/op
PiperOrigin-RevId: 374507431
|
|
syserror allows packages to register translators for errors. These
translators should be called prior to checking if the error is valid,
otherwise it may not account for possible errors that can be returned
from different packages, e.g. safecopy.BusError => syserror.EFAULT.
Second attempt, it passes tests now :-)
PiperOrigin-RevId: 363714508
|
|
The syscall package has been deprecated in favor of golang.org/x/sys.
Note that syscall is still used in the following places:
- pkg/sentry/socket/hostinet/stack.go: some netlink related functionalities
are not yet available in golang.org/x/sys.
- syscall.Stat_t is still used in some places because os.FileInfo.Sys() still
returns it and not unix.Stat_t.
Updates #214
PiperOrigin-RevId: 360701387
|
|
This change implements Release for the FUSE filesystem
and expected behaviors of the FUSE devices.
It includes several checks for aborted connection
in the path for making a request and a function
to abort all the ongoing FUSE requests in order.
|
|
- It's very difficult to prevent returnErrnoAsError and returnError from being
optimized out. Instead, replace BenchmarkReturn* with BenchmarkAssign*, which
store to globalError.
- Compare to a non-nil globalError in BenchmarkCompare* and BenchmarkSwitch*.
New results:
BenchmarkAssignErrno
BenchmarkAssignErrno-12 1000000000 0.615 ns/op
BenchmarkAssignError
BenchmarkAssignError-12 1000000000 0.626 ns/op
BenchmarkCompareErrno
BenchmarkCompareErrno-12 1000000000 0.522 ns/op
BenchmarkCompareError
BenchmarkCompareError-12 1000000000 3.54 ns/op
BenchmarkSwitchErrno
BenchmarkSwitchErrno-12 1000000000 1.45 ns/op
BenchmarkSwitchError
BenchmarkSwitchError-12 536315757 10.9 ns/op
PiperOrigin-RevId: 331875387
|
|
This is needed to avoid circular dependencies between the vfs and kernel
packages.
PiperOrigin-RevId: 327355524
|
|
This change allows the sentry to send FUSE_INIT request and process
the reply. It adds the corresponding structs, employs the fuse
device to send and read the message, and stores the results of negotiation
in corresponding places (inside connection struct).
It adds a CallAsync() function to the FUSE connection interface:
- like Call(), but it's for requests that do not expect immediate response (init, release, interrupt etc.)
- will block if the connection hasn't initialized, which is the same for Call()
|
|
Major differences from existing overlay filesystems:
- Linux allows lower layers in an overlay to require revalidation, but not the
upper layer. VFS1 allows the upper layer in an overlay to require
revalidation, but not the lower layer. VFS2 does not allow any layers to
require revalidation. (Now that vfs.MkdirOptions.ForSyntheticMountpoint
exists, no uses of overlay in VFS1 are believed to require upper layer
revalidation; in particular, the requirement that the upper layer support the
creation of "trusted." extended attributes for whiteouts effectively required
the upper filesystem to be tmpfs in most cases.)
- Like VFS1, but unlike Linux, VFS2 overlay does not attempt to make mutations
of the upper layer atomic using a working directory and features like
RENAME_WHITEOUT. (This may change in the future, since not having a working
directory makes error recovery for some operations, e.g. rmdir, particularly
painful.)
- Like Linux, but unlike VFS1, VFS2 represents whiteouts using character
devices with rdev == 0; the equivalent of the whiteout attribute on
directories is xattr trusted.overlay.opaque = "y"; and there is no equivalent
to the whiteout attribute on non-directories since non-directories are never
merged with lower layers.
- Device and inode numbers work as follows:
- In Linux, modulo the xino feature and a special case for when all layers
are the same filesystem:
- Directories use the overlay filesystem's device number and an
ephemeral inode number assigned by the overlay.
- Non-directories that have been copied up use the device and inode
number assigned by the upper filesystem.
- Non-directories that have not been copied up use a per-(overlay,
layer)-pair device number and the inode number assigned by the lower
filesystem.
- In VFS1, device and inode numbers always come from the lower layer unless
"whited out"; this has the adverse effect of requiring interaction with
the lower filesystem even for non-directory files that exist on the upper
layer.
- In VFS2, device and inode numbers are assigned as in Linux, except that
xino and the samefs special case are not supported.
- Like Linux, but unlike VFS1, VFS2 does not attempt to maintain memory mapping
coherence across copy-up. (This may have to change in the future, as users
may be dependent on this property.)
- Like Linux, but unlike VFS1, VFS2 uses the overlayfs mounter's credentials
when interacting with the overlay's layers, rather than the caller's.
- Like Linux, but unlike VFS1, VFS2 permits multiple lower layers in an
overlay.
- Like Linux, but unlike VFS1, VFS2's overlay filesystem is
application-mountable.
Updates #1199
PiperOrigin-RevId: 316019067
|
|
BoundEndpointAt() is needed to support Unix sockets bound at a
file path, corresponding to BoundEndpoint() in VFS1.
Updates #1476.
PiperOrigin-RevId: 303258251
|
|
PiperOrigin-RevId: 296526279
|
|
PiperOrigin-RevId: 291745021
|
|
- Make FilesystemImpl methods that operate on parent directories require
!rp.Done() (i.e. there is at least one path component to resolve) as
precondition and postcondition (in cases where they do not finish path
resolution due to mount boundary / absolute symlink), and require that they
do not need to follow the last path component (the file being created /
deleted) as a symlink. Check for these in VFS.
- Add FilesystemImpl.GetParentDentryAt(), which is required to obtain the old
parent directory for VFS.RenameAt(). (Passing the Dentry to be renamed
instead has the wrong semantics if the file named by the old path is a mount
point since the Dentry will be on the wrong Mount.)
- Update memfs to implement these methods correctly (?), including RenameAt.
- Change fspath.Parse() to allow empty paths (to simplify implementation of
AT_EMPTY_PATH).
- Change vfs.PathOperation to take a fspath.Path instead of a raw pathname;
non-test callers will need to fspath.Parse() pathnames themselves anyway in
order to detect absolute paths and select PathOperation.Start accordingly.
PiperOrigin-RevId: 286934941
|
|
They are no-ops, so the standard rule works fine.
PiperOrigin-RevId: 268776264
|
|
PiperOrigin-RevId: 257293198
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|
|
It is Implemented without the priority inheritance part given
that gVisor defers scheduling decisions to Go runtime and doesn't
have control over it.
PiperOrigin-RevId: 236989545
Change-Id: I714c8ca0798743ecf3167b14ffeb5cd834302560
|
|
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
|
|
This change also adds extensive testing to the p9 package via mocks. The sanity
checks and type checks are moved from the gofer into the core package, where
they can be more easily validated.
PiperOrigin-RevId: 218296768
Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
Currently, in the face of FileMem fragmentation and a large sendmsg or
recvmsg call, host sockets may pass > 1024 iovecs to the host, which
will immediately cause the host to return EMSGSIZE.
When we detect this case, use a single intermediate buffer to pass to
the kernel, copying to/from the src/dst buffer.
To avoid creating unbounded intermediate buffers, enforce message size
checks and truncation w.r.t. the send buffer size. The same
functionality is added to netstack unix sockets for feature parity.
PiperOrigin-RevId: 216590198
Change-Id: I719a32e71c7b1098d5097f35e6daf7dd5190eff7
|
|
We have been unnecessarily creating too many savable types implicitly.
PiperOrigin-RevId: 206334201
Change-Id: Idc5a3a14bfb7ee125c4f2bb2b1c53164e46f29a8
|
|
PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
|
