Age | Commit message (Collapse) | Author |
|
Change-Id: I7c3db8dfdf95a125d7384c1d67c3300dbb99a47e
PiperOrigin-RevId: 223039923
|
|
Implement RWF_HIPRI (4.6) silently passes the read call.
Implement -1 offset calls readv.
PiperOrigin-RevId: 222840324
Change-Id: If9ddc1e8d086e1a632bdf5e00bae08205f95b6b0
|
|
RET_KILL_THREAD doesn't work well for Go because it will
kill only the offending thread and leave the process hanging.
RET_TRAP can be masked out and it's not guaranteed to kill
the process. RET_KILL_PROCESS is available since 4.14.
For older kernel, continue to use RET_TRAP as this is the
best option (likely to kill process, easy to debug).
PiperOrigin-RevId: 222357867
Change-Id: Icc1d7d731274b16c2125b7a1ba4f7883fbdb2cbd
|
|
PiperOrigin-RevId: 222332703
Change-Id: Id5c3cf79591c5d2949895b4e323e63c48c679820
|
|
SyncSyscallFiltersToThreadGroup and Task.TheadID() both acquired TaskSet RWLock
in R mode and could deadlock if a writer comes in between.
PiperOrigin-RevId: 222313551
Change-Id: I4221057d8d46fec544cbfa55765c9a284fe7ebfa
|
|
Include copyright notices and the referenced LICENSE file.
PiperOrigin-RevId: 222171321
Change-Id: I0cc0b167ca51b536d1087bf1c4742fdf1430bc2a
|
|
PiperOrigin-RevId: 222148953
Change-Id: I21500a9f08939c45314a6414e0824490a973e5aa
|
|
This gets rid of the problematic modeRegex.
PiperOrigin-RevId: 221835959
Change-Id: I566b8d8a43579a4c30c0a08a620a964bbcd826dd
|
|
This eliminates the indirection that existed in task_futex.
PiperOrigin-RevId: 221832498
Change-Id: Ifb4c926d493913aa6694e193deae91616a29f042
|
|
Also update test utilities for probing vsyscall support and add a
metric to see if vsyscalls are actually used in sandboxes.
PiperOrigin-RevId: 221698834
Change-Id: I57870ecc33ea8c864bd7437833f21aa1e8117477
|
|
PiperOrigin-RevId: 221683127
Change-Id: Ide6a9f41d75aa19d0e2051a05a1e4a114a4fb93c
|
|
Previously, TCP_NODELAY was always enabled and we would lie about it being
configurable. TCP_NODELAY is now disabled by default (to match Linux) in the
socket layer so that non-gVisor users don't automatically start using this
questionable optimization.
PiperOrigin-RevId: 221368472
Change-Id: Ib0240f66d94455081f4e0ca94f09d9338b2c1356
|
|
PiperOrigin-RevId: 221189534
Change-Id: Id20d318bed97d5226b454c9351df396d11251e1f
|
|
sync_file_range - sync a file segment with disk
In Linux, sync_file_range() accepts three flags:
SYNC_FILE_RANGE_WAIT_BEFORE
Wait upon write-out of all pages in the specified range that
have already been submitted to the device driver for write-out
before performing any write.
SYNC_FILE_RANGE_WRITE
Initiate write-out of all dirty pages in the specified range
which are not presently submitted write-out. Note that even
this may block if you attempt to write more than request queue
size.
SYNC_FILE_RANGE_WAIT_AFTER
Wait upon write-out of all pages in the range after performing
any write.
In this implementation:
SYNC_FILE_RANGE_WAIT_BEFORE without SYNC_FILE_RANGE_WAIT_AFTER isn't
supported right now.
SYNC_FILE_RANGE_WRITE is skipped. It should initiate write-out of all
dirty pages, but it doesn't wait, so it should be safe to do nothing
while nobody uses SYNC_FILE_RANGE_WAIT_BEFORE.
SYNC_FILE_RANGE_WAIT_AFTER is equal to fdatasync(). In Linux,
sync_file_range() doesn't writes out the file's meta-data, but
fdatasync() does if a file size is changed.
PiperOrigin-RevId: 220730840
Change-Id: Iae5dfb23c2c916967d67cf1a1ad32f25eb3f6286
|
|
Create syscall stubs for missing syscalls upto Linux 4.4 and advertise
a kernel version of 4.4.
PiperOrigin-RevId: 220667680
Change-Id: Idbdccde538faabf16debc22f492dd053a8af0ba7
|
|
Updated error messages so that it doesn't print full Go struct representations
when running a new container in a sandbox. For example, this occurs frequently
when commands are not found when doing a 'kubectl exec'.
PiperOrigin-RevId: 219729141
Change-Id: Ic3a7bc84cd7b2167f495d48a1da241d621d3ca09
|
|
Shm segments can be marked for lazy destruction via shmctl(IPC_RMID),
which destroys a segment once it is no longer attached to any
processes. We were unconditionally decrementing the segment refcount
on shmctl(IPC_RMID) which allowed a user to force a segment to be
destroyed by repeatedly calling shmctl(IPC_RMID), with outstanding
memory maps to the segment.
This is problematic because the memory released by a segment destroyed
this way can be reused by a different process while remaining
accessible by the process with outstanding maps to the segment.
PiperOrigin-RevId: 219713660
Change-Id: I443ab838322b4fb418ed87b2722c3413ead21845
|
|
https://github.com/containerd/containerd/blob/master/oci/spec.go#L206, the mode=755
didn't match the pattern modeRegexp = regexp.MustCompile("0[0-7][0-7][0-7]").
Closes #112
Signed-off-by: Juan <xionghuan.cn@gmail.com>
Change-Id: I469e0a68160a1278e34c9e1dbe4b7784c6f97e5a
PiperOrigin-RevId: 219672525
|
|
This reduces the number of floating point save/restore cycles required (since
we don't need to restore immediately following the switch, this always happens
in a known context) and allows the kernel hooks to capture state. This lets us
remove calls like "Current()".
PiperOrigin-RevId: 219552844
Change-Id: I7676fa2f6c18b9919718458aa888b832a7db8cab
|
|
This improves debuggability greatly.
PiperOrigin-RevId: 219551560
Change-Id: I2ecaffdd1c17b0d9f25911538ea6f693e2bc699f
|
|
PiperOrigin-RevId: 219492587
Change-Id: I47f6fc0b74a4907ab0aff03d5f26453bdb983bb5
|
|
Use private futexes for performance and to align with other runtime uses.
PiperOrigin-RevId: 219422634
Change-Id: Ief2af5e8302847ea6dc246e8d1ee4d64684ca9dd
|
|
PiperOrigin-RevId: 218592058
Change-Id: I373a2d813aa6cc362500dd5a894c0b214a1959d7
|
|
Previously this code used the tcpip error space. Since it is no longer part of
netstack, it can use the sentry's error space (except for a few cases where
there is still some shared code. This reduces the number of error space
conversions required for hot Unix socket operations.
PiperOrigin-RevId: 218541611
Change-Id: I3d13047006a8245b5dfda73364d37b8a453784bb
|
|
Pseudoterminal job control signals are meant to be received and handled by the
sandbox process, but if the ptrace stubs are running in the same process group,
they will receive the signals as well and inject then into the sentry kernel.
This can result in duplicate signals being delivered (often to the wrong
process), or a sentry panic if the ptrace stub is inactive.
This CL makes the ptrace stub run in a new session.
PiperOrigin-RevId: 218536851
Change-Id: Ie593c5687439bbfbf690ada3b2197ea71ed60a0e
|
|
Attempting to create a zero-len shm segment causes a panic since we
try to allocate a zero-len filemem region. The existing code had a
guard to disallow this, but the check didn't encode the fact that
requesting a private segment implies a segment creation regardless of
whether IPC_CREAT is explicitly specified.
PiperOrigin-RevId: 218405743
Change-Id: I30aef1232b2125ebba50333a73352c2f907977da
|
|
This change also adds extensive testing to the p9 package via mocks. The sanity
checks and type checks are moved from the gofer into the core package, where
they can be more easily validated.
PiperOrigin-RevId: 218296768
Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
|
|
This allows us to release messages in the queue when all users close.
PiperOrigin-RevId: 218033550
Change-Id: I2f6e87650fced87a3977e3b74c64775c7b885c1b
|
|
Added events for *ctl syscalls that may have multiple different commands.
For runsc, each syscall event is only logged once. For *ctl syscalls, use
the cmd as identifier, not only the syscall number.
PiperOrigin-RevId: 218015941
Change-Id: Ie3c19131ae36124861e9b492a7dbe1765d9e5e59
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
This should improve performance.
PiperOrigin-RevId: 217610560
Change-Id: I370f196ea2396f1715a460b168ecbee197f94d6c
|
|
This reduces the number of goroutines and runtime timers when
ITIMER_VIRTUAL or ITIMER_PROF are enabled, or when RLIMIT_CPU is set.
This also ensures that thread group CPU timers only advance if running
tasks are observed at the time the CPU clock advances, mostly
eliminating the possibility that a CPU timer expiration observes no
running tasks and falls back to the group leader.
PiperOrigin-RevId: 217603396
Change-Id: Ia24ce934d5574334857d9afb5ad8ca0b6a6e65f4
|
|
This queue only has a single user, so there is no need for it to use an
interface. Merging it into the same package as its sole user allows us to avoid
a circular dependency.
This simplifies the code and should slightly improve performance.
PiperOrigin-RevId: 217595889
Change-Id: Iabbd5164240b935f79933618c61581bc8dcd2822
|
|
PiperOrigin-RevId: 217576188
Change-Id: I82e45c306c5c9161e207311c7dbb8a983820c1df
|
|
PiperOrigin-RevId: 217573168
Change-Id: Ic1914d0ef71bab020e3ee11cf9c4a50a702bd8dd
|
|
Now containers run with "docker run -it" support control characters like ^C and
^Z.
This required refactoring our signal handling a bit. Signals delivered to the
"runsc boot" process are turned into loader.Signal calls with the appropriate
delivery mode. Previously they were always sent directly to PID 1.
PiperOrigin-RevId: 217566770
Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
|
|
The existing logic is backwards and writes iov_len == 0 for a full write.
PiperOrigin-RevId: 217560377
Change-Id: I5a39c31bf0ba9063a8495993bfef58dc8ab7c5fa
|
|
PiperOrigin-RevId: 217557656
Change-Id: I63d27635b1a6c12877279995d2d9847b6a19da9b
|
|
* Integrate recvMsg and sendMsg functions into Recv and Send respectively as
they are no longer shared.
* Clean up partial read/write error handling code.
* Re-order code to make sense given that there is no longer a host.endpoint
type.
PiperOrigin-RevId: 217255072
Change-Id: Ib43fe9286452f813b8309d969be11f5fa40694cd
|
|
host.endpoint contained duplicated logic from the sockerpair implementation and
host.ConnectedEndpoint. Remove host.endpoint in favor of a
host.ConnectedEndpoint wrapped in a socketpair end.
PiperOrigin-RevId: 217240096
Change-Id: I4a3d51e3fe82bdf30e2d0152458b8499ab4c987c
|
|
- Change Dirent.Busy => Dirent.isMountPoint. The function body is unchanged,
and it is no longer exported.
- fs.MayDelete now checks that the victim is not the process root. This aligns
with Linux's namei.c:may_delete().
- Fix "is-ancestor" checks to actually compare all ancestors, not just the
parents.
- Fix handling of paths that end in dots, which are handled differently in
Rename vs. Unlink.
PiperOrigin-RevId: 217239274
Change-Id: I7a0eb768e70a1b2915017ce54f7f95cbf8edf1fb
|
|
PiperOrigin-RevId: 217155458
Change-Id: Id3265b1ec784787039e2131c80254ac4937330c7
|
|
This enables ifconfig to display MTU.
PiperOrigin-RevId: 216917021
Change-Id: Id513b23d9d76899bcb71b0b6a25036f41629a923
|
|
PiperOrigin-RevId: 216733414
Change-Id: I33cd3eb818f0c39717d6656fcdfff6050b37ebb0
|
|
This is a defense-in-depth measure. If the sentry is compromised, this prevents
system call injection to the stubs. There is some complexity with respect to
ptrace and seccomp interactions, so this protection is not really available
for kernel versions < 4.8; this is detected dynamically.
Note that this also solves the vsyscall emulation issue by adding in
appropriate trapping for those system calls. It does mean that a compromised
sentry could theoretically inject these into the stub (ignoring the trap and
resume, thereby allowing execution), but they are harmless.
PiperOrigin-RevId: 216647581
Change-Id: Id06c232cbac1f9489b1803ec97f83097fcba8eb8
|
|
Currently, in the face of FileMem fragmentation and a large sendmsg or
recvmsg call, host sockets may pass > 1024 iovecs to the host, which
will immediately cause the host to return EMSGSIZE.
When we detect this case, use a single intermediate buffer to pass to
the kernel, copying to/from the src/dst buffer.
To avoid creating unbounded intermediate buffers, enforce message size
checks and truncation w.r.t. the send buffer size. The same
functionality is added to netstack unix sockets for feature parity.
PiperOrigin-RevId: 216590198
Change-Id: I719a32e71c7b1098d5097f35e6daf7dd5190eff7
|
|
PiperOrigin-RevId: 216554791
Change-Id: Ia6b7a2e6eaad80a81b2a8f2e3241e93ebc2bda35
|
|
PiperOrigin-RevId: 216431260
Change-Id: Ia6e5c8d506940148d10ff2884cf4440f470e5820
|
|
Also properly add padding after Procs in the linux.Sysinfo
structure. This will be implicitly padded to 64bits so we
need to do the same.
PiperOrigin-RevId: 216372907
Change-Id: I6eb6a27800da61d8f7b7b6e87bf0391a48fdb475
|
|
We accidentally set the wrong maximum. I've also added PATH_MAX and
NAME_MAX to the linux abi package.
PiperOrigin-RevId: 216221311
Change-Id: I44805fcf21508831809692184a0eba4cee469633
|