Age | Commit message (Collapse) | Author |
|
DelayOption is set on all new endpoints in gVisor.
PiperOrigin-RevId: 276746791
|
|
The syscall filters don't allow kill, just tgkill.
PiperOrigin-RevId: 276718421
|
|
PiperOrigin-RevId: 276441249
|
|
PiperOrigin-RevId: 276419967
|
|
PiperOrigin-RevId: 276380008
|
|
Use fd.next to store the iteration start position, which can be used to accelerate allocating new FDs.
And adding the corresponding gtest benchmark to measure performance.
@tanjianfeng
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/758 from DarcySail:master 96685ec7886dfe1a64988406831d3bc002b438cc
PiperOrigin-RevId: 276351250
|
|
PiperOrigin-RevId: 276165962
|
|
SIGKILL can be sent only by an user or OOM-killer. In both cases, we don't
need to panic.
PiperOrigin-RevId: 276150120
|
|
PiperOrigin-RevId: 275956240
|
|
Allow file descriptors of directories as well as AT_FDCWD.
PiperOrigin-RevId: 275929668
|
|
Like (AF_INET, SOCK_RAW) sockets, AF_PACKET sockets require CAP_NET_RAW. With
runsc, you'll need to pass `--net-raw=true` to enable them.
Binding isn't supported yet.
PiperOrigin-RevId: 275909366
|
|
PiperOrigin-RevId: 275650307
|
|
* Pulls common functionality (IO and locking on open) into pipe_util.go.
* Adds pipe/vfs.go, which implements a subset of vfs.FileDescriptionImpl.
A subsequent change will add support for pipes in memfs.
PiperOrigin-RevId: 275322385
|
|
PiperOrigin-RevId: 275139066
|
|
Standard Linux kernel versions are VERSION.PATCHLEVEL.SUBLEVEL. e.g., 4.4.0,
even when the sublevel is 0. Match this standard.
PiperOrigin-RevId: 275125715
|
|
Linux kernel before 4.19 doesn't implement a feature that updates
open FD after a file is open for write (and is copied to the upper
layer). Already open FD will continue to read the old file content
until they are reopened. This is especially problematic for gVisor
because it caches open files.
Flag was added to force readonly files to be reopenned when the
same file is open for write. This is only needed if using kernels
prior to 4.19.
Closes #1006
It's difficult to really test this because we never run on tests
on older kernels. I'm adding a test in GKE which uses kernels
with the overlayfs problem for 1.14 and lower.
PiperOrigin-RevId: 275115289
|
|
When any of these flags are set, all writes will trigger a subsequent fsync
call. This behavior already existed for "write-through" mounts.
O_DIRECT is treated as an alias for O_SYNC. Better support coming soon.
PiperOrigin-RevId: 275114392
|
|
These syscalls were changed in the amd64 file around the time the arm64 PR was
sent out, so their changes got lost.
Updates #63
PiperOrigin-RevId: 275114194
|
|
PiperOrigin-RevId: 275114157
|
|
- Pass context.Context to OnClose().
- Pass memmap.MMapOpts to ConfigureMMap() by pointer so that implementations
can actually mutate it as required.
PiperOrigin-RevId: 274934967
|
|
Netstack has its own stats, we use this to fill /proc/net/snmp.
Note that some metrics are not recorded in Netstack, which will be shown
as 0 in the proc file.
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: Ie0089184507d16f49bc0057b4b0482094417ebe1
|
|
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
|
|
For hostinet, we inherit the data from host procfs. To to that, we
cache the fds for these files for later reads.
Fixes #506
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: I2f81215477455b9c59acf67e33f5b9af28ee0165
|
|
This proc file reports routing information to applications inside the
container.
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: I498e47f8c4c185419befbb42d849d0b099ec71f3
|
|
This proc file contains statistics according to [1].
[1] https://tools.ietf.org/html/rfc2013
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: I9662132085edd8a7783d356ce4237d7ac0800d94
|
|
PiperOrigin-RevId: 274700093
|
|
This allows for peeking at the length of the next message on a netlink socket
without pulling it off the socket's buffer/queue, allowing tools like 'ip' to
work.
This CL also fixes an issue where dump_done_errno was not included in the
NLMSG_DONE messages payload.
Issue #769
PiperOrigin-RevId: 274068637
|
|
Strengthen the header.IPv4.IsValid check to correctly check
for IHL/TotalLength fields. Also add a check to make sure
fragmentOffsets + size of the fragment do not cause a wrap
around for the end of the fragment.
PiperOrigin-RevId: 274049313
|
|
The signalfd descriptors otherwise always show as available. This can lead
programs to spin, assuming they are looking to see what signals are pending.
Updates #139
PiperOrigin-RevId: 274017890
|
|
PiperOrigin-RevId: 273861936
|
|
PiperOrigin-RevId: 273781641
|
|
Also change the default TTL to 64 to match Linux.
PiperOrigin-RevId: 273430341
|
|
PiperOrigin-RevId: 273421634
|
|
PiperOrigin-RevId: 273365058
|
|
PiperOrigin-RevId: 273364848
|
|
PiperOrigin-RevId: 272987037
|
|
In Linux (include/linux/types.h), mode_t is an unsigned short.
PiperOrigin-RevId: 272956350
|
|
The input file descriptor is always a regular file, so sendfile can't lose any
data if it will not be able to write them to the output file descriptor.
Reported-by: syzbot+22d22330a35fa1c02155@syzkaller.appspotmail.com
PiperOrigin-RevId: 272730357
|
|
PiperOrigin-RevId: 272522508
|
|
Right now, we can find more than one process with the 1 PID in /proc.
$ for i in `seq 10`; do
> unshare -fp sleep 1000 &
> done
$ ls /proc
1 1 1 1 12 18 24 29 6 loadavg net sys version
1 1 1 1 16 20 26 32 cpuinfo meminfo self thread-self
1 1 1 1 17 21 28 36 filesystems mounts stat uptime
PiperOrigin-RevId: 272506593
|
|
|
|
gVisor does not currently implement the functionality that would result in
AT_SECURE = 1, but Linux includes AT_SECURE = 0 in the normal case, so we
should do the same.
PiperOrigin-RevId: 272311488
|
|
Kernel.cpuClockTicker increments kernel.cpuClock, which tasks use as a clock to
track their CPU usage. This improves latency in the syscall path by avoid
expensive monotonic clock calls on every syscall entry/exit.
However, this timer fires every 10ms. Thus, when all tasks are idle (i.e.,
blocked or stopped), this forces a sentry wakeup every 10ms, when we may
otherwise be able to sleep until the next app-relevant event. These wakeups
cause the sentry to utilize approximately 2% CPU when the application is
otherwise idle.
Updates to clock are not strictly necessary when the app is idle, as there are
no readers of cpuClock. This commit reduces idle CPU by disabling the timer
when tasks are completely idle, and computing its effects at the next wakeup.
Rather than disabling the timer as soon as the app goes idle, we wait until the
next tick, which provides a window for short sleeps to sleep and wakeup without
doing the (relatively) expensive work of disabling and enabling the timer.
PiperOrigin-RevId: 272265822
|
|
Linux changed this behavior in 16e72e9b30986ee15f17fbb68189ca842c32af58
(v4.11). Previously, extra pages were always mapped RW. Now, those pages will
be executable if the segment specified PF_X. They still must be writeable.
PiperOrigin-RevId: 272256280
|
|
Reported-by: syzbot+bb5ed342be51d39b0cbb@syzkaller.appspotmail.com
PiperOrigin-RevId: 272110815
|
|
It isn't allowed to splice data from and into the same pipe.
But right now this check is broken, because we don't check that both ends are
pipes.
PiperOrigin-RevId: 272107022
|
|
PiperOrigin-RevId: 272101930
|
|
The gofer's CachingInodeOperations implementation contains an optimization for
the common open-read-close pattern when we have a host FD. In this case, the
host kernel will update the timestamp for us to a reasonably close time, so we
don't need an extra RPC to the gofer.
However, when the app explicitly sets the timestamps (via futimes or similar)
then we actually DO need to update the timestamps, because the host kernel
won't do it for us.
To fix this, a new boolean `forceSetTimestamps` was added to
CachineInodeOperations.SetMaskedAttributes. It is only set by
gofer.InodeOperations.SetTimestamps.
PiperOrigin-RevId: 272048146
|
|
It looks like the old code attempted to do this, but didn't realize that err !=
nil even in the happy case.
PiperOrigin-RevId: 272005887
|
|
PiperOrigin-RevId: 271675009
|