| Age | Commit message (Collapse) | Author |
|---|
|
We must use a context.Context with a Root Dirent that corresponds to the
container's chroot. Previously we were using the root context, which does not
have a chroot.
Getting the correct context required refactoring some of the path-lookup code.
We can't lookup the path without a context.Context, which requires
kernel.CreateProcArgs, which we only get inside control.Execute. So we have to
do the path lookup much later than we previously were.
PiperOrigin-RevId: 212064734
Change-Id: I84a5cfadacb21fd9c3ab9c393f7e308a40b9b537
|
|
This allows applications to verify they are running with gVisor. It
also helps debugging when running with a mix of container runtimes.
Closes #54
PiperOrigin-RevId: 212059457
Change-Id: I51d9595ee742b58c1f83f3902ab2e2ecbd5cedec
|
|
PiperOrigin-RevId: 211999211
Change-Id: I5968dd1a8313d3e49bb6e6614e130107495de41d
|
|
Before destroying the Kernel, we disable signal forwarding,
relinquishing control to the Go runtime. External signals that arrive
after disabling forwarding but before the sandbox exits thus may use
runtime.raise (i.e., tkill(2)) and violate the syscall filters.
Adjust forwardSignals to handle signals received after disabling
forwarding the same way they are handled before starting forwarding.
i.e., by implementing the standard Go runtime behavior using tgkill(2)
instead of tkill(2).
This also makes the stop callback block until forwarding actually stops.
This isn't required to avoid tkill(2) but is a saner interface.
PiperOrigin-RevId: 211995946
Change-Id: I3585841644409260eec23435cf65681ad41f5f03
|
|
It was always returning the MountNamespace root, which may be different from
the process Root if the process is in a chroot environment.
PiperOrigin-RevId: 211862181
Change-Id: I63bfeb610e2b0affa9fdbdd8147eba3c39014480
|
|
Imported file needs to be closed after it's
been imported.
PiperOrigin-RevId: 211732472
Change-Id: Ia9249210558b77be076bcce465b832a22eed301f
|
|
PiperOrigin-RevId: 211644897
Change-Id: I882ed827a477d6c03576463ca5bf2d6351892b90
|
|
PiperOrigin-RevId: 211513847
Change-Id: Ib484dd2d921c3e5d70d0e410cd973d3bff4f6b73
|
|
Furthermore, allow for the specification of an ElementMapper. This allows a
single "Element" type to exist on multiple inline lists, and work without
having to embed the entry type.
This is a requisite change for supporting a per-Inode list of Dirents.
PiperOrigin-RevId: 211467497
Change-Id: If2768999b43e03fdaecf8ed15f435fe37518d163
|
|
Task.creds can only be changed by the task's own set*id and execve
syscalls, and Task namespaces can only be changed by the task's own
unshare/setns syscalls.
PiperOrigin-RevId: 211156279
Change-Id: I94d57105d34e8739d964400995a8a5d76306b2a0
|
|
From //pkg/sentry/context/context.go:
// - It is *not safe* to retain a Context passed to a function beyond the scope
// of that function call.
Passing a stored kernel.Task as a context.Context to
fs.FileOwnerFromContext violates this requirement.
PiperOrigin-RevId: 211143021
Change-Id: I4c5b02bd941407be4c9cfdbcbdfe5a26acaec037
|
|
This allows us to call kernel.FDMap.DecRef without holding mutexes
cleanly.
PiperOrigin-RevId: 211139657
Change-Id: Ie59d5210fb9282e1950e2e40323df7264a01bcec
|
|
PiperOrigin-RevId: 211131855
Change-Id: Ia7799561ccd65d16269e0ae6f408ab53749bca37
|
|
PiperOrigin-RevId: 210953512
Change-Id: I07d2d7fb0d268aa8eca26d81ef28b5b5c42289ee
|
|
dirent.walk() takes renameMu, but is often called with renameMu already held,
which can lead to a deadlock.
Fix this by requiring renameMu to be held for reading when dirent.walk() is
called. This causes walks and existence checks to block while a rename
operation takes place, but that is what we were already trying to enforce by
taking renameMu in walk() anyways.
PiperOrigin-RevId: 210760780
Change-Id: Id61018e6e4adbeac53b9c1b3aa24ab77f75d8a54
|
|
dirent.go:Rename() walks to the file being replaced and defers
replaced.DecRef(). After the rename, the reference is dropped, triggering a
writeout and SettAttr call to the gofer. Because of lazyOpenForWrite, the gofer
opens the replaced file BY ITS OLD NAME and calls ftruncate on it.
This CL changes Remove to drop the reference on replaced (and thus trigger
writeout) before the actual rename call.
PiperOrigin-RevId: 210756097
Change-Id: I01ea09a5ee6c2e2d464560362f09943641638e0f
|
|
PiperOrigin-RevId: 210637533
Change-Id: I3536c3f9efb54732a0d8ada8bc299142b2c1682f
|
|
PiperOrigin-RevId: 210616454
Change-Id: I3f536e2b4d603e540cdd9a67c61b8ec3351f4ac3
|
|
PiperOrigin-RevId: 210614669
Change-Id: I408365ff6d6c7765ed7b789446d30e7079cbfc67
|
|
Weak references save / restore involves multiple interface indirection
and cause material latency overhead when there are lots of dirents, each
containing a weak reference map. The nil entries in the map should also
be purged.
PiperOrigin-RevId: 210593727
Change-Id: Ied6f4c3c0726fcc53a24b983d9b3a79121b6b758
|
|
The procid offset is unchanged.
PiperOrigin-RevId: 210551969
Change-Id: I33ba1ce56c2f5631b712417d870aa65ef24e6022
|
|
This is to troubleshoot problems with a hung process that is
not responding to 'runsc debug --stack' command.
PiperOrigin-RevId: 210483513
Change-Id: I4377b210b4e51bc8a281ad34fd94f3df13d9187d
|
|
PiperOrigin-RevId: 210459956
Change-Id: I51859b90fa967631e0a54a390abc3b5541fbee66
|
|
When revalidating a Dirent, if the inode id is the same, then we don't need to
throw away the entire Dirent. We can just update the unstable attributes in
place.
If the inode id has changed, then the remote file has been deleted or moved,
and we have no choice but to throw away the dirent we have a look up another.
In this case, we may still end up losing a mounted dirent that is a child of
the revalidated dirent. However, that seems appropriate here because the entire
mount point has been pulled out from underneath us.
Because gVisor's overlay is at the Inode level rather than the Dirent level, we
must pass the parent Inode and name along with the Inode that is being
revalidated.
PiperOrigin-RevId: 210431270
Change-Id: I705caef9c68900234972d5aac4ae3a78c61c7d42
|
|
PiperOrigin-RevId: 210405166
Change-Id: I252766015885c418e914007baf2fc058fec39b3e
|
|
Implements the TIOCGWINSZ and TIOCSWINSZ ioctls, which allow processes to resize
the terminal. This allows, for example, sshd to properly set the window size for
ssh sessions.
PiperOrigin-RevId: 210392504
Change-Id: I0d4789154d6d22f02509b31d71392e13ee4a50ba
|
|
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
|
|
PiperOrigin-RevId: 210182476
Change-Id: I655a2a801e2069108d30323f7f5ae76deb3ea3ec
|
|
PiperOrigin-RevId: 210021612
Change-Id: If7c161e6fd08cf17942bfb6bc5a8d2c4e271c61e
|
|
PiperOrigin-RevId: 209994384
Change-Id: I16186cf79cb4760a134f3968db30c168a5f4340e
|
|
This improves debugging for pagetable-related issues.
PiperOrigin-RevId: 209827795
Change-Id: I4cfa11664b0b52f26f6bc90a14c5bb106f01e038
|
|
PiperOrigin-RevId: 209817767
Change-Id: Iddf2b8441bc44f31f9a8cf6f2bd8e7a5b824b487
|
|
Linux will ALWAYS add AT_BASE even for a static binary, expect it
will be set to 0 [1].
1. https://github.com/torvalds/linux/blob/master/fs/binfmt_elf.c#L253
PiperOrigin-RevId: 209811129
Change-Id: I92cc66532f23d40f24414a921c030bd3481e12a0
|
|
As required by the contract in Dirent.flush().
Also inline Dirent.freeze() into Dirent.Freeze(), since it is only called from
there.
PiperOrigin-RevId: 209783626
Change-Id: Ie6de4533d93dd299ffa01dabfa257c9cc259b1f4
|
|
When an inode file state failed to load asynchronuously, we want to report
the error instead of potentially panicing in another async loading goroutine
incorrectly unblocked.
PiperOrigin-RevId: 209683977
Change-Id: I591cde97710bbe3cdc53717ee58f1d28bbda9261
|
|
PiperOrigin-RevId: 209627180
Change-Id: Idc84afd38003427e411df6e75abfabd9174174e1
|
|
* Don't truncate abstract addresses at second null.
* Properly handle abstract addresses with length < 108 bytes.
PiperOrigin-RevId: 209502703
Change-Id: I49053f2d18b5a78208c3f640c27dbbdaece4f1a9
|
|
It was returning DT_UNKNOWN, and this was breaking numpy.
PiperOrigin-RevId: 209459351
Change-Id: Ic6f548e23aa9c551b2032b92636cb5f0df9ccbd4
|
|
Numpy needs these.
Also added the "present" directory, since the contents are the same as possible
and online.
PiperOrigin-RevId: 209451777
Change-Id: I2048de3f57bf1c57e9b5421d607ca89c2a173684
|
|
Some linux commands depend on /sys/devices/system/cpu/possible, such
as 'lscpu'.
Add 2 knobs for cpu:
/sys/devices/system/cpu/possible
/sys/devices/system/cpu/online
Both the values are '0 - Kernel.ApplicationCores()-1'.
Change-Id: Iabd8a4e559cbb630ed249686b92c22b4e7120663
PiperOrigin-RevId: 209070163
|
|
When multiple containers run inside a sentry, each container has its own root
filesystem and set of mounts. Containers are also added after sentry boot rather
than all configured and known at boot time.
The fsgofer needs to be able to serve the root filesystem of each container.
Thus, it must be possible to add filesystems after the fsgofer has already
started.
This change:
* Creates a URPC endpoint within the gofer process that listens for requests to
serve new content.
* Enables the sentry, when starting a new container, to add the new container's
filesystem.
* Mounts those new filesystems at separate roots within the sentry.
PiperOrigin-RevId: 208903248
Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
|
|
PiperOrigin-RevId: 208755352
Change-Id: Ia24630f452a4a42940ab73a8113a2fd5ea2cfca2
|
|
Previously, gofer filesystems were configured with the default "fscache"
policy, which caches filesystem metadata and contents aggressively. While this
setting is best for performance, it means that changes from inside the sandbox
may not be immediately propagated outside the sandbox, and vice-versa.
This CL changes volumes and the root fs configuration to use a new
"remote-revalidate" cache policy which tries to retain as much caching as
possible while still making fs changes visible across the sandbox boundary.
This cache policy is enabled by default for the root filesystem. The default
value for the "--file-access" flag is still "proxy", but the behavior is
changed to use the new cache policy.
A new value for the "--file-access" flag is added, called "proxy-exclusive",
which turns on the previous aggressive caching behavior. As the name implies,
this flag should be used when the sandbox has "exclusive" access to the
filesystem.
All volume mounts are configured to use the new cache policy, since it is
safest and most likely to be correct. There is not currently a way to change
this behavior, but it's possible to add such a mechanism in the future. The
configurability is a smaller issue for volumes, since most of the expensive
application fs operations (walking + stating files) will likely served by the
root fs.
PiperOrigin-RevId: 208735037
Change-Id: Ife048fab1948205f6665df8563434dbc6ca8cfc9
|
|
Now, there's a waiter for each end (master and slave) of the TTY, and each
waiter.Entry is only enqueued in one of the waiters.
PiperOrigin-RevId: 208734483
Change-Id: I06996148f123075f8dd48cde5a553e2be74c6dce
|
|
stat()-ing /proc/PID/fd/FD incremented but didn't decrement the refcount for
FD. This behavior wasn't usually noticeable, but in the above case:
- ls would never decrement the refcount of the write end of the pipe to 0.
- This caused the write end of the pipe never to close.
- wc would then hang read()-ing from the pipe.
PiperOrigin-RevId: 208728817
Change-Id: I4fca1ba5ca24e4108915a1d30b41dc63da40604d
|
|
PiperOrigin-RevId: 208720936
Change-Id: Ic943a88b6efeff49574306d4d4e1f113116ae32e
|
|
PiperOrigin-RevId: 208685417
Change-Id: Ie2849c4811e3a2d14a002f521cef018ded0c6c4a
|
|
InodeOperations.Bind now returns a Dirent which will be cached in the Dirent
tree.
When an overlay is in-use, Bind cannot return the Dirent created by the upper
filesystem because the Dirent does not know about the overlay. Instead,
overlayBind must create a new overlay-aware Inode and Dirent and return that.
This is analagous to how Lookup and overlayLookup work.
PiperOrigin-RevId: 208670710
Change-Id: I6390affbcf94c38656b4b458e248739b4853da29
|
|
PiperOrigin-RevId: 208533436
Change-Id: Ifc1a4e2d6438a424650bee831c301b1ac0d670a3
|
|
Previously, an overlay would panic if either the upper or lower fs required
revalidation for a given Dirent. Now, we allow revalidation from the upper
file, but not the lower.
If a cached overlay inode does need revalidation (because the upper needs
revalidation), then the entire overlay Inode will be discarded and a new
overlay Inode will be built with a fresh copy of the upper file.
As a side effect of this change, Revalidate must take an Inode instead of a
Dirent, since an overlay needs to revalidate individual Inodes.
PiperOrigin-RevId: 208293638
Change-Id: Ic8f8d1ffdc09114721745661a09522b54420c5f1
|
