Age | Commit message (Collapse) | Author |
|
Make setting STATX_SIZE a no-op, if it is valid for the given permissions and
file type.
Also update proc tests, which were overfitted before.
Fixes #3842.
Updates #1193.
PiperOrigin-RevId: 331861087
|
|
This is needed for SO_LINGER, where close() is blocked for linger timeout and
we are holding the FDTable lock for the entire timeout which will not allow
us to create/delete other fds. We have to release the locks and then drop the
fds.
PiperOrigin-RevId: 331844185
|
|
Discovered by ayushranjan@:
VFS2 was employing the following algorithm for fetching ready events from an
epoll instance:
- Create a statically sized EpollEvent slice on the stack of size 16.
- Pass that to EpollInstance.ReadEvents() to populate.
- EpollInstance.ReadEvents() requeues level-triggered events that it returns
back into the ready queue.
- Write the results to usermem.
- If the number of results were = 16 then recall EpollInstance.ReadEvents() in
the hopes of getting more. But this will cause duplication of the "requeued"
ready level-triggered events.
So if the ready queue has >= 16 ready events, the EpollWait for loop will spin
until it fills the usermem with `maxEvents` events.
Fixes #3521
PiperOrigin-RevId: 331840527
|
|
PiperOrigin-RevId: 331824411
|
|
Currently the returned offset is an index, and we can't
use it to find the next fd to serialize, because getdents
should iterate correctly despite mutation of fds. Instead,
we can return the next fd to serialize plus 2 (which
accounts for "." and "..") as the offset.
Fixes: #3894
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
PiperOrigin-RevId: 331648296
|
|
In Linux, FDSize is fs/proc/array.c:task_state() => struct fdtable::max_fds,
which is set to the underlying array's length in fs/file.c:alloc_fdtable().
Follow-up changes:
- Remove FDTable.GetRefs() and FDTable.GetRefsVFS2(), which are unused.
- Reset FDTable.used to 0 during restore, since the subsequent calls to
FDTable.setAll() increment it again, causing its value to be doubled. (After
this CL, FDTable.used is only used to avoid reallocation in FDTable.GetFDs(),
so this fix is not very visible.)
PiperOrigin-RevId: 331588190
|
|
PiperOrigin-RevId: 331256608
|
|
This is very similar to copy-up-coherent mmap in the VFS1 overlay, with the
minor wrinkle that there is no fs.InodeOperations.Mappable().
Updates #1199
PiperOrigin-RevId: 331206314
|
|
Fixes an error where in case of a receive buffer larger than the host send
buffer size for a host backed unix dgram socket we would end up swallowing EOF
from recvmsg syscall causing the read() to block forever.
PiperOrigin-RevId: 331192810
|
|
Some CPUs(eg: ampere-emag) can speculate past an ERET instruction and potentially perform
speculative accesses to memory before processing the exception return.
Since the register state is often controlled by a lower privilege level
at the point of an ERET, this could potentially be used as part of a
side-channel attack.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
/proc/[pid]/{mounts,mountinfo}.
Also move VFS.MakeSyntheticMountpoint() (which is a utility wrapper around
VFS.MkdirAllAt(), itself a utility wrapper around VFS.MkdirAt()) to not be in
the middle of the implementation of these proc files.
Fixes #3878
PiperOrigin-RevId: 330843106
|
|
This feature is too expensive for runsc, even with setattrclunk, because
fsgofer.localFile.SetAttr() ends up needing to call reopenProcFD(), incurring
two string allocations for the FD pathname, an fd.FD allocation, and two calls
to runtime.SetFinalizer() when the fd.FD is created and closed respectively
(b/133767962) (plus the actual cost of the syscalls, which is negligible).
PiperOrigin-RevId: 330843012
|
|
PiperOrigin-RevId: 330777900
|
|
PiperOrigin-RevId: 330629897
|
|
- BindSocketThenOpen test was expecting the incorrect error when opening
a socket. Fixed that.
- VirtualFilesystem.BindEndpointAt should not require pop.Path.Begin.Ok()
because the filesystem implementations do not need to walk to the parent
dentry. This check also exists for MknodAt, MkdirAt, RmdirAt, SymlinkAt and
UnlinkAt but those filesystem implementations also need to walk to the parent
denty. So that check is valid. Added some syscall tests to test this.
PiperOrigin-RevId: 330625220
|
|
The check in verity walk returns error for non ENOENT cases, and all
ENOENT results should be checked. This case was missing.
PiperOrigin-RevId: 330604771
|
|
ioctl with FS_IOC_ENABLE_VERITY is added to verity file system to enable
a file as verity file. For a file, a Merkle tree is built with its data.
For a directory, a Merkle tree is built with the root hashes of its
children.
PiperOrigin-RevId: 330604368
|
|
overlay/filesystem.go:lookupLocked() did not DecRef the VD on some error paths
when it would not end up saving or using the VD.
PiperOrigin-RevId: 330589742
|
|
Updates #1487
PiperOrigin-RevId: 330580699
|
|
PiperOrigin-RevId: 330565414
|
|
The existing implementation for TransportProtocol.{Set}Option take
arguments of an empty interface type which all types (implicitly)
implement; any type may be passed to the functions.
This change introduces marker interfaces for transport protocol options
that may be set or queried which transport protocol option types
implement to ensure that invalid types are caught at compile time.
Different interfaces are used to allow the compiler to enforce read-only
or set-only socket options.
RELNOTES: n/a
PiperOrigin-RevId: 330559811
|
|
PiperOrigin-RevId: 330554450
|
|
The args.MountNamespaceVFS2 is used again after the nil check,
instead, mntnsVFS2 which holds the expected reference should be
used. This patch fixes this issue.
Fixes: #3855
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
VFS1 and VFS2 host FDs have different dupping behavior,
making error prone to code for both. Change the contract
so that FDs are released as they are used, so the caller
can simple defer a block that closes all remaining files.
This also addresses handling of partial failures.
With this fix, more VFS2 tests can be enabled.
Updates #1487
PiperOrigin-RevId: 330112266
|
|
Fixes #3779.
PiperOrigin-RevId: 330057268
|
|
Accept on gVisor will return an error if a socket in the accept queue was closed
before Accept() was called. Linux will return the new fd even if the returned
socket is already closed by the peer say due to a RST being sent by the peer.
This seems to be intentional in linux more details on the github issue.
Fixes #3780
PiperOrigin-RevId: 329828404
|
|
PiperOrigin-RevId: 329825497
|
|
Updates #1199
PiperOrigin-RevId: 329802274
|
|
This is to cover the common pattern: open->read/write->close,
where SetAttr needs to be called to update atime/mtime before
the file is closed.
Benchmark results:
BM_OpenReadClose/10240 CPU
setattr+clunk: 63783 ns
VFS2: 68109 ns
VFS1: 72507 ns
Updates #1198
PiperOrigin-RevId: 329628461
|
|
Updates #2972
PiperOrigin-RevId: 329584905
|
|
PiperOrigin-RevId: 329572337
|
|
PiperOrigin-RevId: 329564614
|
|
PiperOrigin-RevId: 329526153
|
|
As documented for gofer.dentry.hostFD.
PiperOrigin-RevId: 329372319
|
|
Implement walk directories in gvisor verity file system. For each step,
the child dentry is verified against a verified parent root hash.
PiperOrigin-RevId: 329358747
|
|
PiperOrigin-RevId: 329036994
|
|
This mainly involved enabling kernfs' client filesystems to provide a
StatFS implementation.
Fixes #3411, #3515.
PiperOrigin-RevId: 329009864
|
|
Also, add corresponding EOF tests for splice/sendfile.
Discovered by syzkaller.
PiperOrigin-RevId: 328975990
|
|
PiperOrigin-RevId: 328863725
|
|
Fixes *.sh Java runtime tests, where splice()-ing from a pipe to /dev/zero
would not actually empty the pipe.
There was no guarantee that the data would actually be consumed on a splice
operation unless the output file's implementation of Write/PWrite actually
called VFSPipeFD.CopyIn. Now, whatever bytes are "written" are consumed
regardless of whether CopyIn is called or not.
Furthermore, the number of bytes in the IOSequence for reads is now capped at
the amount of data actually available. Before, splicing to /dev/zero would
always return the requested splice size without taking the actual available
data into account.
This change also refactors the case where an input file is spliced into an
output pipe so that it follows a similar pattern, which is arguably cleaner
anyway.
Updates #3576.
PiperOrigin-RevId: 328843954
|
|
PiperOrigin-RevId: 328843560
|
|
PiperOrigin-RevId: 328839759
|
|
The existing implementation for {G,S}etSockOpt take arguments of an
empty interface type which all types (implicitly) implement; any
type may be passed to the functions.
This change introduces marker interfaces for socket options that may be
set or queried which socket option types implement to ensure that invalid
types are caught at compile time. Different interfaces are used to allow
the compiler to enforce read-only or set-only socket options.
Fixes #3714.
RELNOTES: n/a
PiperOrigin-RevId: 328832161
|
|
In an upcoming CL, socket option types are made to implement a marker
interface with pointer receivers. Since this results in calling methods
of an interface with a pointer, we incur an allocation when attempting
to get an Endpoint's last error with the current implementation.
When calling the method of an interface, the compiler is unable to
determine what the interface implementation does with the pointer
(since calling a method on an interface uses virtual dispatch at runtime
so the compiler does not know what the interface method will do) so it
allocates on the heap to be safe incase an implementation continues to
hold the pointer after the functioon returns (the reference escapes the
scope of the object).
In the example below, the compiler does not know what b.foo does with
the reference to a it allocates a on the heap as the reference to a may
escape the scope of a.
```
var a int
var b someInterface
b.foo(&a)
```
This change removes the opportunity for that allocation.
RELNOTES: n/a
PiperOrigin-RevId: 328796559
|
|
More implementation+testing to follow.
#3549.
PiperOrigin-RevId: 328770160
|
|
Use reflection and tags to provide automatic conversion from
Config to flags. This makes adding new flags less error-prone,
skips flags using default values (easier to read), and makes
tests correctly use default flag values for test Configs.
Updates #3494
PiperOrigin-RevId: 328662070
|
|
PiperOrigin-RevId: 328639254
|
|
This immediately revealed an escape analysis violation (!), where
the sync.Map was being used in a context that escapes were not
allowed. This is a relatively minor fix and is included.
PiperOrigin-RevId: 328611237
|
|
PiperOrigin-RevId: 328583461
|