Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 301700868
|
|
It was looking at VFS1 table to determine where to
allocate the next FD from.
Updates #1035
PiperOrigin-RevId: 301678858
|
|
PiperOrigin-RevId: 301402181
|
|
FDTable.setAll is used to zap entries, but it grows the table up to
a specified fd.
Reported-by: syzbot+9e281b0750d2d4caa190@syzkaller.appspotmail.com
PiperOrigin-RevId: 301280000
|
|
Updates #1035
PiperOrigin-RevId: 301255357
|
|
Only gofer filesystem was calling vfs.CheckSetStat for
vfs.FilesystemImpl.SetStatAt and vfs.FileDescriptionImpl.SetStat.
Updates #1193, #1672, #1197
PiperOrigin-RevId: 301226522
|
|
PiperOrigin-RevId: 301197007
|
|
Updates #1195, #1193
PiperOrigin-RevId: 300950993
|
|
- When setting up the virtual filesystem, mount a host.filesystem to contain
all files that need to be imported.
- Make read/preadv syscalls to the host in cases where preadv2 may not be
supported yet (likewise for writing).
- Make save/restore functions in kernel/kernel.go return early if vfs2 is
enabled.
PiperOrigin-RevId: 300922353
|
|
Closes #1195
PiperOrigin-RevId: 300867055
|
|
This will give more information about the file to
identify where possibly the extra DecRef()
would be.
PiperOrigin-RevId: 300855874
|
|
PiperOrigin-RevId: 300845134
|
|
- Make oomScoreAdj a ThreadGroup field (Linux: signal_struct::oom_score_adj).
- Avoid deadlock caused by Task.OOMScoreAdj()/SetOOMScoreAdj() locking Task.mu
and TaskSet.mu in the wrong order (via Task.ExitState()).
PiperOrigin-RevId: 300814698
|
|
PiperOrigin-RevId: 300803515
|
|
Note that the raw faccessat system call does not actually take a flags argument;
according to faccessat(2), the glibc wrapper implements the flags by using
fstatat(2). Remove the flag argument that we try to extract from vfs1, which
would just be a garbage value.
Updates #1965
Fixes #2101
PiperOrigin-RevId: 300796067
|
|
2aa9514a06a5e34894e606d508ac2df53b082c74 skips SIGURG, but later code expects
the sigchans array contains consecutive signal numbers.
PiperOrigin-RevId: 300793450
|
|
Plumbs MS_NOEXEC and MS_RDONLY. Others are TODO.
Updates #1623 #1193
PiperOrigin-RevId: 300764669
|
|
This issue was caused by 'restart_syscall'.
The value of Register R0 should be stored after finishing sysemu.
So that we can restore the value and restart syscall.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
This fixes a compile time error:
pkg/sentry/platform/kvm/bluepill_arm64_unsafe.go:45:35: undefined: unsafe
PiperOrigin-RevId: 300375687
|
|
PiperOrigin-RevId: 300362789
|
|
Go 1.14+ sends SIGURG to Ms to attempt asynchronous preemption of a G. Since it
can't guarantee that a SIGURG is only related to preemption, it continues to
forward them to signal.Notify (see runtime.sighandler).
When runsc is running a container, there are three processes: a parent process
and two children (sandbox and gopher). A parent process sets a signal handler
for all signals and redirect them to the container init process. This logic
should ignore SIGURG signals. We already ignore them in the Sentry, but it will
be better to not notify about them when this is possible.
PiperOrigin-RevId: 300345286
|
|
PiperOrigin-RevId: 300270894
|
|
Issue #1833
PiperOrigin-RevId: 299998105
|
|
Linux use the task.thread.uw.tp_value field to store the
TLS pointer on arm64 platform, and we use a similar way
in gvisor to store it in the arch/State struct.
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: Ie76b5c6d109bc27ccfd594008a96753806db7764
|
|
PiperOrigin-RevId: 299448307
|
|
In VFS2, imported file descriptors are stored in a kernfs-based filesystem.
Upon calling ImportFD, the host fd can be accessed in two ways:
1. a FileDescription that can be added to the FDTable, and
2. a Dentry in the host.filesystem mount, which we will want to access through
magic symlinks in /proc/[pid]/fd/.
An implementation of the kernfs.Inode interface stores a unique host fd. This
inode can be inserted into file descriptions as well as dentries.
This change also plumbs in three FileDescriptionImpls corresponding to fds for
sockets, TTYs, and other files (only the latter is implemented here).
These implementations will mostly make corresponding syscalls to the host.
Where possible, the logic is ported over from pkg/sentry/fs/host.
Updates #1672
PiperOrigin-RevId: 299417263
|
|
When list elements are removed from a list but not discarded, it becomes
important to invalidate the references they hold to their former
neighbors to prevent memory leaks.
PiperOrigin-RevId: 299412421
|
|
PiperOrigin-RevId: 299405855
|
|
PiperOrigin-RevId: 299405663
|
|
Adds an oom_score_adj and oom_score proc file stub. oom_score_adj accepts
writes of values -1000 to 1000 and persists the value with the task. New tasks
inherit the parent's oom_score_adj.
oom_score is a read-only stub that always returns the value '0'.
Issue #202
PiperOrigin-RevId: 299245355
|
|
PiperOrigin-RevId: 299238067
|
|
PiperOrigin-RevId: 299233818
|
|
gofer.dentryReadWriter.WriteFromBlocks was not updating
gofer.dentry.size after a write operation that skips the
cache.
Updates #1198
PiperOrigin-RevId: 298708646
|
|
The support of PTRACE_SYSEMU on arm64 was added in the 5.3 kernel,
so we can be sure that the current version is higher that 5.3.
And this change moves vsyscall seccomp rules to the arch specific file,
because vsyscall isn't supported on arm64.
PiperOrigin-RevId: 298696493
|
|
PiperOrigin-RevId: 298476533
|
|
PiperOrigin-RevId: 298405064
|
|
DATA RACE in netstack.(*SocketOperations).fetchReadView
Write at 0x00c001dca138 by goroutine 1001:
gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).fetchReadView()
pkg/sentry/socket/netstack/netstack.go:418 +0x85
gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).coalescingRead()
pkg/sentry/socket/netstack/netstack.go:2309 +0x67
gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).nonBlockingRead()
pkg/sentry/socket/netstack/netstack.go:2378 +0x183d
Previous read at 0x00c001dca138 by goroutine 1111:
gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).Ioctl()
pkg/sentry/socket/netstack/netstack.go:2666 +0x533
gvisor.dev/gvisor/pkg/sentry/syscalls/linux.Ioctl()
Reported-by: syzbot+d4c3885fcc346f08deb6@syzkaller.appspotmail.com
PiperOrigin-RevId: 298387377
|
|
PiperOrigin-RevId: 298380654
|
|
PiperOrigin-RevId: 297982488
|
|
This is needed for syzkaller to proper classify issues.
Right now, all watchdog issues are duped to one with the
subject "panic: Sentry detected stuck task(s). See stack
trace and message above for more details".
PiperOrigin-RevId: 297975363
|
|
There is no cpuid instruction on arm64, so we need to defined it
just to avoid a compile time error.
Signed-off-by: Andrei Vagin <avagin@gmail.com>
|
|
Signed-off-by: Andrei Vagin <avagin@gmail.com>
|
|
A follow-up change will convert the networking code to use this standard
pipe implementation.
PiperOrigin-RevId: 297903206
|
|
/dev/net/tun does not currently work with hostinet. This has caused some
program starts failing because it thinks the feature exists.
PiperOrigin-RevId: 297876196
|
|
We changed syscalls to allow dup3 for ARM64.
Updates #1198
PiperOrigin-RevId: 297870816
|
|
- Fix review comments.
|
|
PiperOrigin-RevId: 297674924
|
|
PiperOrigin-RevId: 297638665
|
|
PiperOrigin-RevId: 297494373
|
|
PiperOrigin-RevId: 297492004
|