| Age | Commit message (Collapse) | Author |
|---|
|
|
|
In VFS1's overlayfs, files use the device and inode number of the lower layer
inode if one exists, and the upper layer inode otherwise. The former behavior
is inefficient (requiring lower layer lookups even if the file exists and is
otherwise wholly determined by the upper layer), and somewhat dangerous if the
lower layer is also observable (since both the overlay and lower layer file
will have the same device and inode numbers and thus appear to be the same
file, despite being behaviorally different). VFS2 overlayfs imitates Linux
overlayfs (in its default configuration) instead; it always uses the inode
number from the originating layer, but synthesizes a unique device number for
directories and another device number for non-directory files that have not
been copied-up.
As it turns out, the latter is insufficient (in VFS2, and possibly Linux as
well), because a given layer may include files with different device numbers.
If two distinct files on such a layer have device number X and Y respectively,
but share inode number Z, then the overlay will map both files to some private
device number X' and inode number Z, potentially confusing applications. Fix
this by assigning synthetic device numbers based on the lower layer's device
number, rather than the lower layer's vfs.Filesystem.
PiperOrigin-RevId: 339300341
|
|
|
|
Updates #3921
PiperOrigin-RevId: 339195417
|
|
|
|
PiperOrigin-RevId: 339166854
|
|
Also change verity test to use a context with an active task. This is
required to delete/rename the file in the underlying file system.
PiperOrigin-RevId: 339146445
|
|
|
|
Much like the VFS2 gofer client, kernfs too now caches dentries. The size of the
LRU cache is configurable via mount options.
Have adopted the same reference semantics from gofer client dentry.
Only sysfs and procfs use this LRU cache. The rest of the kernfs users (devpts,
fusefs, host, pipefs, sockfs) still use the no cache approach.
PiperOrigin-RevId: 339139835
|
|
|
|
Control messages collected when peeking into a socket were being leaked.
PiperOrigin-RevId: 339114961
|
|
PiperOrigin-RevId: 338847417
|
|
|
|
Updates #1486.
PiperOrigin-RevId: 338832085
|
|
PiperOrigin-RevId: 338798433
|
|
|
|
PiperOrigin-RevId: 338784921
|
|
|
|
Inode number consistency checks are now skipped in save/restore tests for
reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename.
They pass in VFS1 due to the bug described in new test case
SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs.
Fixes #1663
PiperOrigin-RevId: 338776148
|
|
|
|
PiperOrigin-RevId: 338728070
|
|
Read is implemented by PRead, with offset obtained from Seek.
PiperOrigin-RevId: 338718587
|
|
|
|
Added the following fields in kernfs.InodeAttr:
- blockSize
- atime
- mtime
- ctime
Also resolved all TODOs for #1193.
Fixes #1193
PiperOrigin-RevId: 338714527
|
|
Even if the child dentry has been cached, we should still check whether
the file and the corresponding Merkle tree file exist as expected. This
ensures that we can detect deletion/renaming of files that have been
previous enabled and opened.
Also make all verification failures to return EIO. This helps to test
verify failures.
PiperOrigin-RevId: 338709055
|
|
|
|
The SO_ACCEPTCONN option is used only on getsockopt(). When this option is
specified, getsockopt() indicates whether socket listening is enabled for
the socket. A value of zero indicates that socket listening is disabled;
non-zero that it is enabled.
PiperOrigin-RevId: 338703206
|
|
|
|
Our current reference leak checker uses finalizers to verify whether an object
has reached zero references before it is garbage collected. There are multiple
problems with this mechanism, so a rewrite is in order.
With finalizers, there is no way to guarantee that a finalizer will run before
the program exits. When an unreachable object with a finalizer is garbage
collected, its finalizer will be added to a queue and run asynchronously. The
best we can do is run garbage collection upon sandbox exit to make sure that
all finalizers are enqueued.
Furthermore, if there is a chain of finalized objects, e.g. A points to B
points to C, garbage collection needs to run multiple times before all of the
finalizers are enqueued. The first GC run will register the finalizer for A but
not free it. It takes another GC run to free A, at which point B's finalizer
can be registered. As a result, we need to run GC as many times as the length
of the longest such chain to have a somewhat reliable leak checker.
Finally, a cyclical chain of structs pointing to one another will never be
garbage collected if a finalizer is set. This is a well-known issue with Go
finalizers (https://github.com/golang/go/issues/7358). Using leak checking on
filesystem objects that produce cycles will not work and even result in memory
leaks.
The new leak checker stores reference counted objects in a global map when
leak check is enabled and removes them once they are destroyed. At sandbox
exit, any remaining objects in the map are considered as leaked. This provides
a deterministic way of detecting leaks without relying on the complexities of
finalizers and garbage collection.
This approach has several benefits over the former, including:
- Always detects leaks of objects that should be destroyed very close to
sandbox exit. The old checker very rarely detected these leaks, because it
relied on garbage collection to be run in a short window of time.
- Panics if we forgot to enable leak check on a ref-counted object (we will try
to remove it from the map when it is destroyed, but it will never have been
added).
- Can store extra logging information in the map values without adding to the
size of the ref count struct itself. With the size of just an int64, the ref
count object remains compact, meaning frequent operations like IncRef/DecRef
are more cache-efficient.
- Can aggregate leak results in a single report after the sandbox exits.
Instead of having warnings littered in the log, which were
non-deterministically triggered by garbage collection, we can print all
warning messages at once. Note that this could also be a limitation--the
sandbox must exit properly for leaks to be detected.
Some basic benchmarking indicates that this change does not significantly
affect performance when leak checking is enabled, which is understandable
since registering/unregistering is only done once for each filesystem object.
Updates #1486.
PiperOrigin-RevId: 338685972
|
|
|
|
Reported-by: syzbot+c0e175d2b10708314eb3@syzkaller.appspotmail.com
PiperOrigin-RevId: 338386575
|
|
|
|
PiperOrigin-RevId: 338321125
|
|
|
|
PiperOrigin-RevId: 338126491
|
|
|
|
Reported-by: syzbot+7406eef8247cb5a20855@syzkaller.appspotmail.com
PiperOrigin-RevId: 337974474
|
|
|
|
Reported-by: syzbot+078580ce5dd6d607fcd8@syzkaller.appspotmail.com
Reported-by: syzbot+2096681f6891e7bf8aed@syzkaller.appspotmail.com
PiperOrigin-RevId: 337973519
|
|
|
|
- Check the sticky bit in overlay.filesystem.UnlinkAt(). Fixes
StickyTest.StickyBitPermDenied.
- When configuring a VFS2 overlay in runsc, copy the lower layer's root
owner/group/mode to the upper layer's root (as in the VFS1 equivalent,
boot.addOverlay()). This makes the overlay root owned by UID/GID 65534 with
mode 0755 rather than owned by UID/GID 0 with mode 01777. Fixes
CreateTest.CreateFailsOnUnpermittedDir, which assumes that the test cannot
create files in /.
- MknodTest.UnimplementedTypesReturnError assumes that the creation of device
special files is not supported. However, while the VFS2 gofer client still
doesn't support device special files, VFS2 tmpfs does, and in the overlay
test dimension mknod() targets a tmpfs upper layer. The test initially has
all capabilities, including CAP_MKNOD, so its creation of these files
succeeds. Constrain these tests to VFS1.
- Rename overlay.nonDirectoryFD to overlay.regularFileFD and only use it for
regular files, using the original FD for pipes and device special files. This
is more consistent with Linux (which gets the original inode_operations, and
therefore file_operations, for these file types from ovl_fill_inode() =>
init_special_inode()) and fixes remaining mknod and pipe tests.
- Read/write 1KB at a time in PipeTest.Streaming, rather than 4 bytes. This
isn't strictly necessary, but it makes the test less obnoxiously slow on
ptrace.
Fixes #4407
PiperOrigin-RevId: 337971042
|
|
|
|
|
|
PiperOrigin-RevId: 337919424
|
|
|
|
Reported-by: syzbot+0268cc591c0f517a1de0@syzkaller.appspotmail.com
PiperOrigin-RevId: 337901664
|
|
|
|
This change makes the following changes:
- Unlocks MemoryFile.mu while calling mincore (checkCommitted) because mincore
can take a really long time. Accordingly looks up the segment in the tree
tree again and handles changes to the segment.
- MemoryFile.UpdateUsage() can now only be called at frequency at most 100Hz.
100 Hz = linux.CLOCKS_PER_SEC.
Co-authored-by: Jamie Liu <jamieliu@google.com>
PiperOrigin-RevId: 337865250
|
|
Consistent with the linux approach, we will produce a sigill to handle
el0_undef.
After applying this patch, exec_binary_test_runsc_kvm will be passed on
Arm64.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
|
