Age | Commit message (Collapse) | Author |
|
gVisor does not currently implement the functionality that would result in
AT_SECURE = 1, but Linux includes AT_SECURE = 0 in the normal case, so we
should do the same.
PiperOrigin-RevId: 272311488
|
|
Kernel.cpuClockTicker increments kernel.cpuClock, which tasks use as a clock to
track their CPU usage. This improves latency in the syscall path by avoid
expensive monotonic clock calls on every syscall entry/exit.
However, this timer fires every 10ms. Thus, when all tasks are idle (i.e.,
blocked or stopped), this forces a sentry wakeup every 10ms, when we may
otherwise be able to sleep until the next app-relevant event. These wakeups
cause the sentry to utilize approximately 2% CPU when the application is
otherwise idle.
Updates to clock are not strictly necessary when the app is idle, as there are
no readers of cpuClock. This commit reduces idle CPU by disabling the timer
when tasks are completely idle, and computing its effects at the next wakeup.
Rather than disabling the timer as soon as the app goes idle, we wait until the
next tick, which provides a window for short sleeps to sleep and wakeup without
doing the (relatively) expensive work of disabling and enabling the timer.
PiperOrigin-RevId: 272265822
|
|
Linux changed this behavior in 16e72e9b30986ee15f17fbb68189ca842c32af58
(v4.11). Previously, extra pages were always mapped RW. Now, those pages will
be executable if the segment specified PF_X. They still must be writeable.
PiperOrigin-RevId: 272256280
|
|
Reported-by: syzbot+bb5ed342be51d39b0cbb@syzkaller.appspotmail.com
PiperOrigin-RevId: 272110815
|
|
It isn't allowed to splice data from and into the same pipe.
But right now this check is broken, because we don't check that both ends are
pipes.
PiperOrigin-RevId: 272107022
|
|
PiperOrigin-RevId: 272101930
|
|
The gofer's CachingInodeOperations implementation contains an optimization for
the common open-read-close pattern when we have a host FD. In this case, the
host kernel will update the timestamp for us to a reasonably close time, so we
don't need an extra RPC to the gofer.
However, when the app explicitly sets the timestamps (via futimes or similar)
then we actually DO need to update the timestamps, because the host kernel
won't do it for us.
To fix this, a new boolean `forceSetTimestamps` was added to
CachineInodeOperations.SetMaskedAttributes. It is only set by
gofer.InodeOperations.SetTimestamps.
PiperOrigin-RevId: 272048146
|
|
It looks like the old code attempted to do this, but didn't realize that err !=
nil even in the happy case.
PiperOrigin-RevId: 272005887
|
|
PiperOrigin-RevId: 271675009
|
|
PiperOrigin-RevId: 271649711
|
|
PiperOrigin-RevId: 271644926
|
|
PiperOrigin-RevId: 271442321
|
|
PiperOrigin-RevId: 271168948
|
|
Before https://golang.org/cl/173160 syscall.RawSyscall would zero out
the last three register arguments to the system call. That no longer happens.
For system calls that take more than three arguments, use RawSyscall6 to
ensure that we pass zero, not random data, for the additional arguments.
PiperOrigin-RevId: 271062527
|
|
Closes #261
PiperOrigin-RevId: 270973347
|
|
How to reproduce:
$ echo "timeout 10 ls" > foo.sh
$ chmod +x foo.sh
$ ./foo.sh
(will hang here for 10 secs, and the output of ls does not show)
When "ls" process writes to stdout, it receives SIGTTOU signal, and
hangs there. Until "timeout" process timeouts, and kills "ls" process.
The expected result is: "ls" writes its output into tty, and terminates
immdedately, then "timeout" process receives SIGCHLD and terminates.
The reason for this failure is that we missed the check for TOSTOP (if
set, background processes will receive the SIGTTOU signal when they do
write).
We use drivers/tty/n_tty.c:n_tty_write() as a reference.
Fixes: #862
Reported-by: chris.zn <chris.zn@antfin.com>
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Signed-off-by: chenglang.hy <chenglang.hy@antfin.com>
|
|
PiperOrigin-RevId: 270763208
|
|
PiperOrigin-RevId: 270680704
|
|
"d_off is the distance from the start of the directory to the start of the next
linux_dirent." - getdents(2).
PiperOrigin-RevId: 270349685
|
|
Previously, when we set hostname:
$ strace hostname abc
...
sethostname("abc", 3) = -1 ENAMETOOLONG (File name too long)
...
According to man 2 sethostname:
"The len argument specifies the number of bytes in name. (Thus, name
does not require a terminating null byte.)"
We wrongly use the CopyStringIn() to check terminating zero byte in
the implementation of sethostname syscall.
To fix this, we use CopyInBytes() instead.
Fixes: #861
Reported-by: chenglang.hy <chenglang.hy@antfin.com>
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
|
|
PiperOrigin-RevId: 270114317
|
|
PiperOrigin-RevId: 270094324
|
|
Adresses a deadlock with the rolled back change:
https://github.com/google/gvisor/commit/b6a5b950d28e0b474fdad160b88bc15314cf9259
Creating a session from an orphaned process group was causing a lock to be
acquired twice by a single goroutine. This behavior is addressed, and a test
(OrphanRegression) has been added to pty.cc.
Implemented the following ioctls:
- TIOCSCTTY - set controlling TTY
- TIOCNOTTY - remove controlling tty, maybe signal some other processes
- TIOCGPGRP - get foreground process group. Also enables tcgetpgrp().
- TIOCSPGRP - set foreground process group. Also enabled tcsetpgrp().
Next steps are to actually turn terminal-generated control characters (e.g. C^c)
into signals to the proper process groups, and to send SIGTTOU and SIGTTIN when
appropriate.
PiperOrigin-RevId: 270088599
|
|
`bytealg/indexbyte` will use AVX or SSE instruction set, if possible,
which could accelerate `CopyStringIn` function by 28%.
In worst case(CPU doesn't support SSE), `bytealg/indexbyte`
will degenerate to traversal lookup. When dealing with
short strings, `bytealg/indexbyte` has the same performance level as
before.
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Signed-off-by: Hang Su <darcy.sh@antfin.com>
|
|
Signed-off-by: Haibo Xu haibo.xu@arm.com
Change-Id: I333872da9bdf56ddfa8ab2f034dfc1f36a7d3132
|
|
Note that the exact semantics for these signalfds are slightly different from
Linux. These signalfds are bound to the process at creation time. Reads, polls,
etc. are all associated with signals directed at that task. In Linux, all
signalfd operations are associated with current, regardless of where the
signalfd originated.
In practice, this should not be an issue given how signalfds are used. In order
to fix this however, we will need to plumb the context through all the event
APIs. This gets complicated really quickly, because the waiter APIs are all
netstack-specific, and not generally exposed to the context. Probably not
worthwhile fixing immediately.
PiperOrigin-RevId: 269901749
|
|
PiperOrigin-RevId: 269631877
|
|
ENOTDIR has to be returned when a component used as a directory in
pathname is not, in fact, a directory.
PiperOrigin-RevId: 269037893
|
|
This also allows the tee(2) implementation to be enabled, since dup can now be
properly supported via WriteTo.
Note that this change necessitated some minor restructoring with the
fs.FileOperations splice methods. If the *fs.File is passed through directly,
then only public API methods are accessible, which will deadlock immediately
since the locking is already done by fs.Splice. Instead, we pass through an
abstract io.Reader or io.Writer, which elide locks and use the underlying
fs.FileOperations directly.
PiperOrigin-RevId: 268805207
|
|
They are no-ops, so the standard rule works fine.
PiperOrigin-RevId: 268776264
|
|
This CL implements go_marshal, a code generation utility for
automatically serializing and deserializing ABI structs.
The go_marshal tool automatically generates implementations of the new
marshal interface. Unlike binary.Marshal/Unmarshal, the generated
interface implementations use no runtime reflection, and translates to
a single memcpy for most structs. See go_marshal/README.md for
details.
PiperOrigin-RevId: 268065475
|
|
PiperOrigin-RevId: 267498537
|
|
The simple test script has gotten out of control. Shard this script into
different pieces and attempt to impose order on overall test structure. This
change helps lay some of the foundations for future improvements.
* The runsc/test directories are moved into just test/.
* The runsc/test/testutil package is split into logical pieces.
* The scripts/ directory contains new top-level targets.
* Each test is now responsible for building targets it requires.
* The install functionality is moved into `runsc` itself for simplicity.
* The existing kokoro run_tests.sh file now just calls all (can be split).
After this change is merged, I will create multiple distinct workflows for
Kokoro, one for each of the scripts currently targeted by `run_tests.sh` today,
which should dramatically reduce the time-to-run for the Kokoro tests, and
provides a better foundation for further improvements to the infrastructure.
PiperOrigin-RevId: 267081397
|
|
PiperOrigin-RevId: 266496644
|
|
PiperOrigin-RevId: 266491264
|
|
Ioctl was returning just the buffer size from epsocket.endpoint
and it was not considering data from epsocket.SocketOperations
that was read from the endpoint, but not yet sent to the caller.
PiperOrigin-RevId: 266485461
|
|
PiperOrigin-RevId: 266229756
|
|
PiperOrigin-RevId: 266177409
|
|
PiperOrigin-RevId: 265731735
|
|
When output file is in append mode, sendfile(2) should fail
with EINVAL and not EBADF.
Closes #721
PiperOrigin-RevId: 265718958
|
|
This used to be the case, but regressed after a recent change.
Also made a few fixes around it and clean up the code a bit.
Closes #720
PiperOrigin-RevId: 265717496
|
|
PiperOrigin-RevId: 264920977
|
|
This is the first step in replacing some of the redundant types with the
standard library equivalents.
PiperOrigin-RevId: 264706552
|
|
Document limitation of no reasonable implementation for RWF_HIPRI
flag (High Priority Read/Write for block-based file systems).
PiperOrigin-RevId: 264237589
|
|
We wrongly parses output interface as gateway address.
The fix is straightforward.
Fixes #638
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: Ia4bab31f3c238b0278ea57ab22590fad00eaf061
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/684 from tanjianfeng:fix-638 b940e810367ad1273519bfa594f4371bdd293e83
PiperOrigin-RevId: 264211336
|
|
PiperOrigin-RevId: 264180125
|
|
Linux allows to call connect for ANY and the zero port.
PiperOrigin-RevId: 263892534
|
|
Migrates all (except 3) seqfile implementations to the vfs.DynamicBytesSource
interface. There should not be any change in functionality due to this migration
itself.
Please note that the following seqfile implementations have not been migrated:
- /proc/filesystems in proc/filesystems.go
- /proc/[pid]/mountinfo in proc/mounts.go
- /proc/[pid]/mounts in proc/mounts.go
This is because these depend on pending changes in /pkg/senty/vfs.
PiperOrigin-RevId: 263880719
|
|
PiperOrigin-RevId: 263880577
|
|
This fixes the implementation ambiguity issues when a filesystem
implementation embeds vfs.DefaultDirectoryFD to its directory FD along
with an internal common fileDescription utility.
For similar reasons also removes FileDescriptionDefaultImpl from
DynamicBytesFileDescriptionImpl.
PiperOrigin-RevId: 263795513
|