Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 307977689
|
|
PiperOrigin-RevId: 307941984
|
|
Updates #1476.
PiperOrigin-RevId: 307726055
|
|
Even though BoundEndpointAt is not yet implemented for gofer fs, allow path
resolution errors to be returned so that we can jump to tmpfs, where it is
implemented.
Updates #1476.
PiperOrigin-RevId: 307718335
|
|
- Fix defer operation ordering in kernfs.Filesystem.AccessAt()
- Add AT_NULL entry in proc/pid/auvx
- Fix line padding in /proc/pid/maps
- Fix linux_dirent serialization for getdents(2)
- Remove file creation flags from vfs.FileDescription.statusFlags()
Updates #1193, #1035
PiperOrigin-RevId: 307704159
|
|
PiperOrigin-RevId: 307680200
|
|
This change:
- Drastically simplifies the synchronization model: filesystem structure is
both implementation-defined and implementation-synchronized.
- Allows implementations of vfs.DentryImpl to use implementation-specific
dentry types, reducing casts during path traversal.
- Doesn't require dentries representing non-directory files to waste space on a
map of children.
- Allows dentry revalidation and mount lookup to be correctly ordered (fixed
FIXME in fsimpl/gofer/filesystem.go).
- Removes the need to have two separate maps in gofer.dentry
(dentry.vfsd.children and dentry.negativeChildren) for positive and negative
lookups respectively.
//pkg/sentry/fsimpl/tmpfs/benchmark_test.go:
name old time/op new time/op delta
VFS2TmpfsStat/1-112 172ns ± 4% 165ns ± 3% -4.08% (p=0.002 n=9+9)
VFS2TmpfsStat/2-112 199ns ± 3% 195ns ±10% ~ (p=0.132 n=8+9)
VFS2TmpfsStat/3-112 230ns ± 2% 216ns ± 2% -6.15% (p=0.000 n=8+8)
VFS2TmpfsStat/8-112 390ns ± 2% 358ns ± 4% -8.33% (p=0.000 n=9+8)
VFS2TmpfsStat/64-112 2.20µs ± 3% 2.01µs ± 3% -8.48% (p=0.000 n=10+8)
VFS2TmpfsStat/100-112 3.42µs ± 9% 3.08µs ± 2% -9.82% (p=0.000 n=9+8)
VFS2TmpfsMountStat/1-112 278ns ± 1% 286ns ±15% ~ (p=0.712 n=8+10)
VFS2TmpfsMountStat/2-112 311ns ± 4% 298ns ± 2% -4.27% (p=0.000 n=9+8)
VFS2TmpfsMountStat/3-112 339ns ± 3% 330ns ± 9% ~ (p=0.070 n=8+9)
VFS2TmpfsMountStat/8-112 503ns ± 3% 466ns ± 3% -7.38% (p=0.000 n=8+8)
VFS2TmpfsMountStat/64-112 2.53µs ±16% 2.17µs ± 7% -14.19% (p=0.000 n=10+9)
VFS2TmpfsMountStat/100-112 3.60µs ± 4% 3.30µs ± 8% -8.33% (p=0.001 n=8+9)
Updates #1035
PiperOrigin-RevId: 307655892
|
|
Sentry metrics with nanoseconds units are labeled as such, and non-cumulative
sentry metrics are supported.
PiperOrigin-RevId: 307621080
|
|
PiperOrigin-RevId: 307598974
|
|
PiperOrigin-RevId: 307477185
|
|
PiperOrigin-RevId: 307422746
|
|
Instead of plumbing error through kernfs.Inode.Mode, panic if err != nil.
The errors that can result from an fstat syscall all indicate that something
is fundamentally wrong, and panicking should be acceptable.
PiperOrigin-RevId: 307406847
|
|
PiperOrigin-RevId: 307166482
|
|
PiperOrigin-RevId: 307166317
|
|
prlimit was erroneously comparing UIDs and GIDs when getting/setting a process'
own limits. From the manpage:
To set or get the resources of a process other than itself, the caller must have
the CAP_SYS_RESOURCE capability, or the real, effective, and saved set user IDs
of the target process must match the real user ID of the caller and the real,
effective, and saved set group IDs of the target process must match the real
group ID of the caller.
PiperOrigin-RevId: 307127266
|
|
These methods let users eaily break the VectorisedView abstraction, and
allowed netstack to slip into pseudo-enforcement of the "all headers are
in the first View" invariant. Removing them and replacing with PullUp(n)
breaks this reliance and will make it easier to add iptables support and
rework network buffer management.
The new View.PullUp(n) method is low cost in the common case, when when
all the headers fit in the first View.
|
|
PiperOrigin-RevId: 307078788
|
|
Included:
- loader_test.go RunTest and TestStartSignal VFS2
- container_test.go TestAppExitStatus on VFS2
- experimental flag added to runsc to turn on VFS2
Note: shared mounts are not yet supported.
PiperOrigin-RevId: 307070753
|
|
This previously changed in 305699233, but this behaviour turned out to
be load bearing.
PiperOrigin-RevId: 307033802
|
|
The vdso is enabled, so we can use the sigreturn trampolines
the vdso provides in arch module.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
Updates #1035
PiperOrigin-RevId: 306968644
|
|
PiperOrigin-RevId: 306891171
|
|
- Use the fs.File, rather than the vfs.FileDescription, in the VFS1 version.
- Check for a nil fs.File/vfs.FileDescription before calling DecRef, which is
possible if a racing dup2() or dup3() replaces the file descriptor between
when it is installed and when it is returned. (This is not possible in Linux
because Linux separates allocation of a file descriptor from binding an
allocated file descriptor to a struct file, and dup2/dup3 return EBUSY if
asked to replace an allocated but unbound file descriptor.)
PiperOrigin-RevId: 306517101
|
|
Needed for PipeTest_Flags: files opened by open() and openat() get O_LARGEFILE
(on architectures with 64-bit off_t), but not FDs created by other syscalls
such as pipe().
Updates #1035
PiperOrigin-RevId: 306504788
|
|
PiperOrigin-RevId: 306348346
|
|
PiperOrigin-RevId: 306306809
|
|
PiperOrigin-RevId: 306300032
|
|
Note that most kinds of sockets are not yet supported in VFS2
(only Unix sockets are partially supported at the moment), so
these syscalls will still generally fail. Enabling them allows
us to begin running socket tests for VFS2 as more features are
ported over.
Updates #1476, #1478, #1484, #1485.
PiperOrigin-RevId: 306292294
|
|
The comments in the ticket indicate that this behavior
is fine and that the ticket should be closed, so we shouldn't
need pointers to the ticket.
PiperOrigin-RevId: 306266071
|
|
PiperOrigin-RevId: 306263615
|
|
noNewPrivileges is ignored if set to false since gVisor assumes that
PR_SET_NO_NEW_PRIVS is always enabled.
PiperOrigin-RevId: 305991947
|
|
As in VFS1, we only support the user.* namespace. Plumbing is added to tmpfs
and goferfs.
Note that because of the slightly different order of checks between VFS2 and
Linux, one of the xattr tests needs to be relaxed slightly.
Fixes #2363.
PiperOrigin-RevId: 305985121
|
|
The sentry doesn't allow execve, but it's a good defense
in-depth measure.
PiperOrigin-RevId: 305958737
|
|
The dependency strace=>kernel grew over time. strace also depends on
task's FD table and FSContext. It could be fixed with some interfaces
the other way, but then we're trading an interface for another, and
kernel.Stracer is likely cleaner.
Closes #155
PiperOrigin-RevId: 305909678
|
|
PiperOrigin-RevId: 305807868
|
|
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I5bb8fa7d580d173b1438d6465e1adb442216c8fa
|
|
This should fix panic at aio callback.
PiperOrigin-RevId: 305798549
|
|
PiperOrigin-RevId: 305794509
|
|
Block and drain requests in io_destroy(2).
Note the reason to create read-only mapping.
PiperOrigin-RevId: 305786312
|
|
PiperOrigin-RevId: 305699233
|
|
Minimize the use of unsafe.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
The Linux does the same.
Reported-by: syzbot+e81716e8956e92e9d56b@syzkaller.appspotmail.com
PiperOrigin-RevId: 305625439
|
|
PiperOrigin-RevId: 305598136
|
|
PiperOrigin-RevId: 305592245
|
|
PiperOrigin-RevId: 305588941
|
|
Determine system time from within the sentry rather than relying on the remote
filesystem to prevent inconsistencies.
Resolve related TODOs; the time discrepancies in question don't exist anymore.
PiperOrigin-RevId: 305557099
|
|
FileDescription references are side-effectual; for example, holding a reference
on the write end of a pipe prevents reads from the read end from returning EOF.
This change is consistent with Linux, but not VFS1; while VFS1 also has this
bug, it's less visible there since VFS1 procfs disables caching.
Updates #1195
PiperOrigin-RevId: 305545099
|
|
Updates #164
PiperOrigin-RevId: 305544029
|
|
This fixes a bug in the proc net directory.
Updates #2243
|
|
Updates #2243
|