Age | Commit message (Collapse) | Author |
|
|
|
PiperOrigin-RevId: 293411655
|
|
PiperOrigin-RevId: 293271055
|
|
PiperOrigin-RevId: 293243342
|
|
The timer ID is copied out to the argument.
Fixes #1738
PiperOrigin-RevId: 293210801
|
|
Updates #1035
PiperOrigin-RevId: 293194631
|
|
Updates #1198
Opening host pipes (by spinning in fdpipe) and host sockets is not yet
complete, and will be done in a future CL.
Major differences from VFS1 gofer client (sentry/fs/gofer), with varying levels
of backportability:
- "Cache policies" are replaced by InteropMode, which control the behavior of
timestamps in addition to caching. Under InteropModeExclusive (analogous to
cacheAll) and InteropModeWritethrough (analogous to cacheAllWritethrough),
client timestamps are *not* written back to the server (it is not possible in
9P or Linux for clients to set ctime, so writing back client-authoritative
timestamps results in incoherence between atime/mtime and ctime). Under
InteropModeShared (analogous to cacheRemoteRevalidating), client timestamps
are not used at all (remote filesystem clocks are authoritative). cacheNone
is translated to InteropModeShared + new option
filesystemOptions.specialRegularFiles.
- Under InteropModeShared, "unstable attribute" reloading for permission
checks, lookup, and revalidation are fused, which is feasible in VFS2 since
gofer.filesystem controls path resolution. This results in a ~33% reduction
in RPCs for filesystem operations compared to cacheRemoteRevalidating. For
example, consider stat("/foo/bar/baz") where "/foo/bar/baz" fails
revalidation, resulting in the instantiation of a new dentry:
VFS1 RPCs:
getattr("/") // fs.MountNamespace.FindLink() => fs.Inode.CheckPermission() => gofer.inodeOperations.check() => gofer.inodeOperations.UnstableAttr()
walkgetattr("/", "foo") = fid1 // fs.Dirent.walk() => gofer.session.Revalidate() => gofer.cachePolicy.Revalidate()
clunk(fid1)
getattr("/foo") // CheckPermission
walkgetattr("/foo", "bar") = fid2 // Revalidate
clunk(fid2)
getattr("/foo/bar") // CheckPermission
walkgetattr("/foo/bar", "baz") = fid3 // Revalidate
clunk(fid3)
walkgetattr("/foo/bar", "baz") = fid4 // fs.Dirent.walk() => gofer.inodeOperations.Lookup
getattr("/foo/bar/baz") // linux.stat() => gofer.inodeOperations.UnstableAttr()
VFS2 RPCs:
getattr("/") // gofer.filesystem.walkExistingLocked()
walkgetattr("/", "foo") = fid1 // gofer.filesystem.stepExistingLocked()
clunk(fid1)
// No getattr: walkgetattr already updated metadata for permission check
walkgetattr("/foo", "bar") = fid2
clunk(fid2)
walkgetattr("/foo/bar", "baz") = fid3
// No clunk: fid3 used for new gofer.dentry
// No getattr: walkgetattr already updated metadata for stat()
- gofer.filesystem.unlinkAt() does not require instantiation of a dentry that
represents the file to be deleted. Updates #898.
- gofer.regularFileFD.OnClose() skips Tflushf for regular files under
InteropModeExclusive, as it's nonsensical to request a remote file flush
without flushing locally-buffered writes to that remote file first.
- Symlink targets are cached when InteropModeShared is not in effect.
- p9.QID.Path (which is already required to be unique for each file within a
server, and is accordingly already synthesized from device/inode numbers in
all known gofers) is used as-is for inode numbers, rather than being mapped
along with attr.RDev in the client to yet another synthetic inode number.
- Relevant parts of fsutil.CachingInodeOperations are inlined directly into
gofer package code. This avoids having to duplicate part of its functionality
in fsutil.HostMappable.
PiperOrigin-RevId: 293190213
|
|
Internal pipes are supported similarly to how internal UDS is done.
It is also controlled by the same flag.
Fixes #1102
PiperOrigin-RevId: 293150045
|
|
Add a file lock implementation that can be embedded into various filesystem
implementations.
Updates #1480
PiperOrigin-RevId: 292614758
|
|
|
|
A couple other things that changed:
- There's a proper extension registration system for matchers. Anyone
adding another matcher can use tcp_matcher.go or udp_matcher.go as a
template.
- All logging and use of syserr.Error in the netfilter package happens at the
highest possible level (public functions). Lower-level functions just
return normal, descriptive golang errors.
|
|
PiperOrigin-RevId: 292587459
|
|
|
|
PiperOrigin-RevId: 292369598
|
|
Splice must not allow negative offsets. Writes also must not allow offset +
size to overflow int64. Reads are similarly broken, but not just in splice
(b/148095030).
Reported-by: syzbot+0e1ff0b95fb2859b4190@syzkaller.appspotmail.com
PiperOrigin-RevId: 292361208
|
|
PiperOrigin-RevId: 292233574
|
|
|
|
Updates #1480
PiperOrigin-RevId: 292180192
|
|
For amd64, this has been done on cl/288342928.
PiperOrigin-RevId: 292170856
|
|
PiperOrigin-RevId: 292165063
|
|
For test case 'TestBounce', we use KVM_SET_VCPU_EVENTS to trigger sError
to leave guest.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
Currently, Send() will copy data into a new byte slice without regard to the
original size. Size checks should be performed before the allocation takes
place.
Note that for the sake of performance, we avoid putting the buffer
allocation into the critical section. As a result, the size checks need to be
performed again within Enqueue() in case the limit has changed.
PiperOrigin-RevId: 292058147
|
|
WritableSource is a convenience interface used for files that can
be written to, e.g. /proc/net/ipv4/tpc_sack. It reads max of 4KB
and only from offset 0 which should cover most cases. It can be
extended as neeed.
Updates #1195
PiperOrigin-RevId: 292056924
|
|
Updates #1487
Updates #1623
PiperOrigin-RevId: 292040835
|
|
FD table now holds both VFS1 and VFS2 types and uses the correct
one based on what's set.
Parts of this CL are just initial changes (e.g. sys_read.go,
runsc/main.go) to serve as a template for the remaining changes.
Updates #1487
Updates #1623
PiperOrigin-RevId: 292023223
|
|
PiperOrigin-RevId: 292021389
|
|
Special files can have additional requirements for granularity.
For example, read from eventfd returns EINVAL if a size is less 8 bytes.
Reported-by: syzbot+3905f5493bec08eb7b02@syzkaller.appspotmail.com
PiperOrigin-RevId: 292002926
|
|
PiperOrigin-RevId: 291997879
|
|
Test command:
$ ip route get 1.1.1.1
Fixes: #1099
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/1121 from tanjianfeng:fix-1099 e6919f3d4ede5aa51a48b3d2be0d7a4b482dd53d
PiperOrigin-RevId: 291990716
|
|
PiperOrigin-RevId: 291986033
|
|
This isn't in the libc wrapper, but it is in the syscall itself.
Discovered by @xiaobo55x in #1625.
PiperOrigin-RevId: 291973931
|
|
|
|
PiperOrigin-RevId: 291821850
|
|
Because the abi will depend on the core types for marshalling (usermem,
context, safemem, safecopy), these need to be flattened from the sentry
directory. These packages contain no sentry-specific details.
PiperOrigin-RevId: 291811289
|
|
The preferred Copyright holder is "The gVisor Authors".
PiperOrigin-RevId: 291786657
|
|
PiperOrigin-RevId: 291774815
|
|
|
|
PiperOrigin-RevId: 291745021
|
|
|
|
|
|
PiperOrigin-RevId: 291471892
|
|
Note that in VFS2, filesystem device numbers are per-vfs.FilesystemImpl rather
than global, avoiding the need for a "registry" type to handle save/restore.
(This is more consistent with Linux anyway: compare e.g.
mm/shmem.c:shmem_mount() => fs/super.c:mount_nodev() => (indirectly)
set_anon_super().)
PiperOrigin-RevId: 291425193
|
|
Go 1.14+ sends SIGURG to Ms to attempt asynchronous preemption of a G. Since it
can't guarantee that a SIGURG is only related to preemption, it continues to
forward them to signal.Notify (see runtime.sighandler).
We should ignore these signals, as applications shouldn't receive them. Note
that this means that truly external SIGURG can no longer be sent to the
application (as with SIGCHLD).
PiperOrigin-RevId: 291415357
|
|
|
|
This pattern (delete from map when dropping) is also used in epoll.RemoveEntry,
and seems like generally a good idea.
PiperOrigin-RevId: 291268208
|
|
PiperOrigin-RevId: 291249314
|
|
The kernel may return EINTR from:
kvm_create_vm
kvm_init_mmu_notifier
mmu_notifier_register
do_mmu_notifier_register
mm_take_all_locks
Go 1.14's preemptive scheduling signals make hitting this much more likely.
PiperOrigin-RevId: 291212669
|
|
PiperOrigin-RevId: 291041576
|
|
The iptables binary is looking for libxt_.so when it should be looking
for libxt_udp.so, so it's having an issue reading the data in
xt_match_entry. I think it may be an alignment issue.
Trying to fix this is leading to me fighting with the metadata struct,
so I'm gonna go kill that.
|
|
PiperOrigin-RevId: 291006713
|