Age | Commit message (Collapse) | Author |
|
This is initialized lazily on the first unimplemented
syscall. Without the sync.Once, this is racy.
PiperOrigin-RevId: 260971758
|
|
PiperOrigin-RevId: 260851452
|
|
It gets rid of holding state of the io.Reader offset (which is anyways held by
the vfs.FileDescriptor struct. It is also odd using a io.Reader becuase we
using io.ReaderAt to interact with the device. So making a io.ReaderAt wrapper
makes more sense.
Most importantly, it gets rid of the complexity of extracting the file reader
from a regular file implementation and then using it. Now we can just use the
regular file implementation as a reader which is more intuitive.
PiperOrigin-RevId: 260846927
|
|
Also adds stress tests for block map reader and intensifies extent reader tests.
PiperOrigin-RevId: 260838177
|
|
PiperOrigin-RevId: 260783254
|
|
Adds feature to launch from an open host FD instead of a binary_path.
The FD should point to a valid executable and most likely be statically
compiled. If the executable is not statically compiled, the loader will
search along the interpreter paths, which must be able to be resolved in
the Sandbox's file system or start will fail.
PiperOrigin-RevId: 260756825
|
|
This provides the following benefits:
- We can now use pkg/fd package which does not take ownership
of the file descriptor. So it does not close the fd when garbage collected.
This reduces scope of errors from unexpected garbage collection of io.File.
- It enforces the offset parameter in every read call.
It does not affect the fd offset nor is it affected by it. Hence reducing
scope of error of using stale offsets when reading.
- We do not need to serialize the usage of any global file descriptor anymore.
So this drops the mutual exclusion req hence reducing complexity and
congestion.
PiperOrigin-RevId: 260635174
|
|
Allocate a larger memory buffer and combine multiple copies into one copy,
to reduce the number of copies from kernel memory to user memory.
Signed-off-by: Hang Su <darcy.sh@antfin.com>
|
|
PiperOrigin-RevId: 260629559
|
|
PiperOrigin-RevId: 260624470
|
|
This introduces two new types of Emitters:
1. MultiEmitter, which will forward events to other registered Emitters, and
2. RateLimitedEmitter, which will forward events to a wrapped Emitter, subject
to given rate limits.
The methods in the eventchannel package itself act like a multiEmitter, but is
not actually an Emitter. Now we have a DefaultEmitter, and the methods in
eventchannel simply forward calls to the DefaultEmitter.
The unimplemented syscall handler now uses a RateLimetedEmitter that wraps the
DefaultEmitter.
PiperOrigin-RevId: 260612770
|
|
PiperOrigin-RevId: 260220279
|
|
PiperOrigin-RevId: 260047477
|
|
PiperOrigin-RevId: 259865366
|
|
PiperOrigin-RevId: 259856442
|
|
PiperOrigin-RevId: 259835948
|
|
This allows the user code to add a network address with a subnet prefix length.
The prefix length value is stored in the network endpoint and provided back to
the user in the ProtocolAddress type.
PiperOrigin-RevId: 259807693
|
|
The different containers in a sandbox used only one pid
namespace before. This results in that a container can see
the processes in another container in the same sandbox.
This patch use different pid namespace for different containers.
Signed-off-by: chris.zn <chris.zn@antfin.com>
|
|
PiperOrigin-RevId: 259666476
|
|
PiperOrigin-RevId: 259657917
|
|
PiperOrigin-RevId: 259628657
|
|
This keeps all container filesystem completely separate from eachother
(including from the root container filesystem), and allows us to get rid of the
"__runsc_containers__" directory.
It also simplifies container startup/teardown as we don't have to muck around
in the root container's filesystem.
PiperOrigin-RevId: 259613346
|
|
PiperOrigin-RevId: 259427074
|
|
m.available.Signal() has to be called under m.mu.RLock, otherwise it can
race with machine.Get:
m.Get | m.Put
-------------------------------------
m.mu.Lock() |
Seatching available vcpu|
| m.available.Signal()
m.available.Wait |
PiperOrigin-RevId: 259394051
|
|
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
PiperOrigin-RevId: 258996346
|
|
PiperOrigin-RevId: 258859507
|
|
Major differences from the current ("v1") sentry VFS:
- Path resolution is Filesystem-driven (FilesystemImpl methods call
vfs.ResolvingPath methods) rather than VFS-driven (fs package owns a
Dirent tree and calls fs.InodeOperations methods to populate it). This
drastically improves performance, primarily by reducing overhead from
inefficient synchronization and indirection. It also makes it possible
to implement remote filesystem protocols that translate FS system calls
into single RPCs, rather than having to make (at least) one RPC per path
component, significantly reducing the latency of remote filesystems
(especially during cold starts and for uncacheable shared filesystems).
- Mounts are correctly represented as a separate check based on
contextual state (current mount) rather than direct replacement in a
fs.Dirent tree. This makes it possible to support (non-recursive) bind
mounts and mount namespaces.
Included in this CL is fsimpl/memfs, an incomplete in-memory filesystem
that exists primarily to demonstrate intended filesystem implementation
patterns and for benchmarking:
BenchmarkVFS1TmpfsStat/1-6 3000000 497 ns/op
BenchmarkVFS1TmpfsStat/2-6 2000000 676 ns/op
BenchmarkVFS1TmpfsStat/3-6 2000000 904 ns/op
BenchmarkVFS1TmpfsStat/8-6 1000000 1944 ns/op
BenchmarkVFS1TmpfsStat/64-6 100000 14067 ns/op
BenchmarkVFS1TmpfsStat/100-6 50000 21700 ns/op
BenchmarkVFS2MemfsStat/1-6 10000000 197 ns/op
BenchmarkVFS2MemfsStat/2-6 5000000 233 ns/op
BenchmarkVFS2MemfsStat/3-6 5000000 268 ns/op
BenchmarkVFS2MemfsStat/8-6 3000000 477 ns/op
BenchmarkVFS2MemfsStat/64-6 500000 2592 ns/op
BenchmarkVFS2MemfsStat/100-6 300000 4045 ns/op
BenchmarkVFS1TmpfsMountStat/1-6 2000000 679 ns/op
BenchmarkVFS1TmpfsMountStat/2-6 2000000 912 ns/op
BenchmarkVFS1TmpfsMountStat/3-6 1000000 1113 ns/op
BenchmarkVFS1TmpfsMountStat/8-6 1000000 2118 ns/op
BenchmarkVFS1TmpfsMountStat/64-6 100000 14251 ns/op
BenchmarkVFS1TmpfsMountStat/100-6 100000 22397 ns/op
BenchmarkVFS2MemfsMountStat/1-6 5000000 317 ns/op
BenchmarkVFS2MemfsMountStat/2-6 5000000 361 ns/op
BenchmarkVFS2MemfsMountStat/3-6 5000000 387 ns/op
BenchmarkVFS2MemfsMountStat/8-6 3000000 582 ns/op
BenchmarkVFS2MemfsMountStat/64-6 500000 2699 ns/op
BenchmarkVFS2MemfsMountStat/100-6 300000 4133 ns/op
From this we can infer that, on this machine:
- Constant cost for tmpfs stat() is ~160ns in VFS2 and ~280ns in VFS1.
- Per-path-component cost is ~35ns in VFS2 and ~215ns in VFS1, a
difference of about 6x.
- The cost of crossing a mount boundary is about 80ns in VFS2
(MemfsMountStat/1 does approximately the same amount of work as
MemfsStat/2, except that it also crosses a mount boundary). This is an
inescapable cost of the separate mount lookup needed to support bind
mounts and mount namespaces.
PiperOrigin-RevId: 258853946
|
|
|
|
copyMu is required to read child.overlay.upper.
PiperOrigin-RevId: 258662209
|
|
PiperOrigin-RevId: 258657913
|
|
PiperOrigin-RevId: 258657776
|
|
PiperOrigin-RevId: 258645957
|
|
PiperOrigin-RevId: 258643966
|
|
PiperOrigin-RevId: 258635459
|
|
tcpdump creates these.
PiperOrigin-RevId: 258611829
|
|
PiperOrigin-RevId: 258607547
|
|
We were invalidating the wrong overlayEntry in rename and missing invalidation
in rename and remove if lower exists.
PiperOrigin-RevId: 258604685
|
|
PiperOrigin-RevId: 258479216
|
|
This proc file reports the stats of interfaces. We could use ifconfig
command to check the result.
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: Ia7c1e637f5c76c30791ffda68ee61e861b6ef827
COPYBARA_INTEGRATE_REVIEW=https://gvisor-review.googlesource.com/c/gvisor/+/18282/
PiperOrigin-RevId: 258303936
|
|
Now we call FUTEX_WAKE with ^uintptr(0) of waiters, but in this case only one
waiter will be waked up. If we want to wake up all of them, the number of
waiters has to be set to math.MaxInt32.
PiperOrigin-RevId: 258285286
|
|
iptables also relies on IPPROTO_RAW in a way. It opens such a socket to
manipulate the kernel's tables, but it doesn't actually use any of the
functionality. Blegh.
PiperOrigin-RevId: 257903078
|
|
Adds support to set/get the TCP_MAXSEG value but does not
really change the segment sizes emitted by netstack or
alter the MSS advertised by the endpoint. This is currently
being added only to unblock iperf3 on gVisor. Plumbing
this correctly requires a bit more work which will come
in separate CLs.
PiperOrigin-RevId: 257859112
|
|
PiperOrigin-RevId: 257855479
|
|
These are filesystem-specific, and filesystems are allowed to return ENOTSUP if
they are not supported.
PiperOrigin-RevId: 257813477
|
|
|
|
Actual implementation to follow, but this will satisfy applications that
want it to just exist.
|
|
The image is of size 64Kb which supports 64 1k blocks
and 16 inodes. This is the smallest size mkfs.ext4 works with.
Added README.md documenting how this was created and included
all files on the device under assets.
PiperOrigin-RevId: 257712672
|
|
Renamed ext4 to ext since we are targeting ext(2/3/4).
Removed fs.go since we are targeting VFS2.
Added ext.go with filesystem struct.
PiperOrigin-RevId: 257689775
|
|
A userspace process (CPL=3) can access an i/o port if the bit corresponding to
the port is set to 0 in the I/O permission bitmap.
Configure the I/O permission bitmap address beyond the last valid byte in the
TSS so access to all i/o ports is blocked.
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Change-Id: I3df76980c3735491db768f7210e71703f86bb989
PiperOrigin-RevId: 257336518
|