Age | Commit message (Collapse) | Author |
|
On ARM64, when ptrace stops on a system call, it uses the x7 register to
indicate whether the stop has been signalled from syscall entry or syscall
exit. This means that we can't get a value of this register and we can't change
it. More details are in the comment for tracehook_report_syscall in
arch/arm64/kernel/ptrace.c.
This happens only if we stop on a system call, so let's queue a signal, resume
a stub thread and catch it on a signal handling.
Fixes: #5238
PiperOrigin-RevId: 352668695
|
|
The same intent can be specified via the io.Writer.
PiperOrigin-RevId: 352098747
|
|
- Remove the pipe package's dependence on the buffer package, which becomes
unused as a result. The buffer package is currently intended to serve two use
cases, pipes and temporary buffers, and does neither optimally as a result;
this change facilitates retooling the buffer package to better serve the
latter.
- Pass callbacks taking safemem.BlockSeq to the internal pipe I/O methods,
which makes most callbacks trivial.
- Fix VFS1's splice() and tee() to immediately return if a pipe returns a
partial write.
PiperOrigin-RevId: 351911375
|
|
Fixes #4963
Startblock:
has LGTM from sbalana
and then
add reviewer ghanan
PiperOrigin-RevId: 351886320
|
|
Return EEXIST when overwritting a file as long as the caller has exec
permission on the parent directory, even if the caller doesn't have
write permission.
Also reordered the mount write check, which happens before permission
is checked.
Closes #5164
PiperOrigin-RevId: 351868123
|
|
Link address resolution is performed at the link layer (if required) so
we can defer it from the transport layer. When link resolution is
required, packets will be queued and sent once link resolution
completes. If link resolution fails, the transport layer will receive a
control message indicating that the stack failed to route the packet.
tcpip.Endpoint.Write no longer returns a channel now that writes do not
wait for link resolution at the transport layer.
tcpip.ErrNoLinkAddress is no longer used so it is removed.
Removed calls to stack.Route.ResolveWith from the transport layer so
that link resolution is performed when a route is created in response
to an incoming packet (e.g. to complete TCP handshakes or send a RST).
Tests:
- integration_test.TestForwarding
- integration_test.TestTCPLinkResolutionFailure
Fixes #4458
RELNOTES: n/a
PiperOrigin-RevId: 351684158
|
|
PiperOrigin-RevId: 351638451
|
|
Simplify some logic while I'm here.
PiperOrigin-RevId: 351491593
|
|
These are primarily simplification and lint mistakes. However, minor
fixes are also included and tests added where appropriate.
PiperOrigin-RevId: 351425971
|
|
This requires several changes:
* Templates must preserve relevant tags.
* Pagetables templates are split into two targets, each preserving tags.
* The binary VDSO is similarly split into two targets, with some juggling.
* The top level tools/go_branch.sh now does a crossbuild of ARM64 as well,
and checks and merges the results of the two branches together.
Fixes #5178
PiperOrigin-RevId: 351304330
|
|
PiperOrigin-RevId: 350862699
|
|
PiperOrigin-RevId: 350691246
|
|
Read now takes a destination io.Writer, count, options. Keeping the method name
Read, in contrast to the Write method.
This enables:
* direct transfer of views under VV
* zero copy
It also eliminates the need for sentry to keep a slice of view because
userspace had requested a read that is smaller than the view returned, removing
the complexity there.
Read/Peek/ReadPacket are now consolidated together and some duplicate code is
removed.
PiperOrigin-RevId: 350636322
|
|
Signed-off-by: Andrei Vagin <avagin@gmail.com>
|
|
IPv4 was always supported but UDP never supported joining/leaving IPv6
multicast groups via socket options.
Add: IPPROTO_IPV6, IPV6_JOIN_GROUP/IPV6_ADD_MEMBERSHIP
Remove: IPPROTO_IPV6, IPV6_LEAVE_GROUP/IPV6_DROP_MEMBERSHIP
Test: integration_test.TestUDPAddRemoveMembershipSocketOption
PiperOrigin-RevId: 350396072
|
|
PiperOrigin-RevId: 350375461
|
|
PiperOrigin-RevId: 350223482
|
|
This includes minor fix-ups:
* Handle SIGTERM in runsc debug, to exit gracefully.
* Fix cmd.debug.go opening all profiles as RDONLY.
* Fix the test name in fio_test.go, and encode the block size in the test.
PiperOrigin-RevId: 350205718
|
|
Reported-by: syzbot+814105309d2ae8651084@syzkaller.appspotmail.com
PiperOrigin-RevId: 350159452
|
|
Syzkaller discovered this bug in pipefs by doing something quite strange:
creat(&(0x7f0000002a00)='./file1\x00', 0x0)
mount(&(0x7f0000000440)=ANY=[], &(0x7f00000002c0)='./file1\x00', &(0x7f0000000300)='devtmpfs\x00', 0x20000d, 0x0)
creat(&(0x7f0000000000)='./file1/file0\x00', 0x0)
This can be reproduced with:
touch mymount
mkfifo /dev/mypipe
mount -o ro -t devtmpfs devtmpfs mymount
echo 123 > mymount/mypipe
PiperOrigin-RevId: 349687714
|
|
This allows for a model of profiling when you can start collection, and
it will terminate when the sandbox terminates. Without this synchronous
call, it is effectively impossible to collect length blocking and mutex
profiles.
PiperOrigin-RevId: 349483418
|
|
global
In order to improve the performance, some kpti related codes(TCR.A1) have
been reverted, and set kernel pagetable as global.
Signed-off-by: Robin Luk <lubin.lu@antgroup.com>
|
|
open() has to return ENXIO in this case.
O_PATH isn't supported by vfs1.
PiperOrigin-RevId: 348820478
|
|
PiperOrigin-RevId: 348696094
|
|
PiperOrigin-RevId: 348092999
|
|
PiperOrigin-RevId: 348056159
|
|
PiperOrigin-RevId: 348055514
|
|
Closes #5128
PiperOrigin-RevId: 348052446
|
|
Introduces the per-socket error queue and the necessary cmsg mechanisms.
PiperOrigin-RevId: 348028508
|
|
PiperOrigin-RevId: 347890782
|
|
PiperOrigin-RevId: 347720083
|
|
PiperOrigin-RevId: 347711998
|
|
PiperOrigin-RevId: 347706953
|
|
syzkaller reported the closing of a nil channel. This is only possible when the
AIOContext was destroyed twice.
Some scenarios that could lead to this:
- It died and then some called aioCtx.Prepare() on it and then killed it again
which could cause the double destroy. The context could have been destroyed
in between the call to LookupAIOContext() and Prepare().
- aioManager was destroyed but it did not update the contexts map. So
Lookup could still return a dead AIOContext and then someone could call
Prepare on it and kill it again.
So added a check in aioCtx.Prepare() for the context being dead. This will
prevent a dead context from resurrecting.
Also refactored code to destroy the aioContext consistently. Earlier we were not
munmapping the aioContexts that were destroyed upon aioManager destruction.
Reported-by: syzbot+ef6a588d0ce6059991d2@syzkaller.appspotmail.com
PiperOrigin-RevId: 347704347
|
|
We want to make the recvmsg syscall to the host regardless of if the dst is
empty or not so that:
- Host can populate the control messages if necessary.
- Host can return sender address.
- Host can return appropriate errors.
Earlier because we were using the IOSequence.CopyOutFrom() API, the usermem
package does not even call the Reader function if the destination is empty (as
an optimization).
PiperOrigin-RevId: 347684566
|
|
PiperOrigin-RevId: 347671070
|
|
PiperOrigin-RevId: 347660920
|
|
There are surprisingly few syscall tests that run with hostinet. For example
running the following command only returns two results:
`bazel query test/syscalls:all | grep hostnet`
I think as a result, as our control messages evolved, hostinet was left
behind. Update it to support all control messages netstack supports.
This change also updates sentry's control message parsing logic to make it up to
date with all the control messages we support.
PiperOrigin-RevId: 347508892
|
|
PiperOrigin-RevId: 347437786
|
|
We should not assert that all resources are dropped after saving.
PiperOrigin-RevId: 347420131
|
|
SO_OOBINLINE option is set/get as boolean value, which is the same as linux.
As we currently do not support disabling this option, we always return it as
true.
PiperOrigin-RevId: 347413905
|
|
PiperOrigin-RevId: 347091372
|
|
PiperOrigin-RevId: 347047550
|
|
tcpip.ControlMessages can not contain Linux specific structures which makes it
painful to convert back and forth from Linux to tcpip back to Linux when passing
around control messages in hostinet and raw sockets.
Now we convert to the Linux version of the control message as soon as we are
out of tcpip.
PiperOrigin-RevId: 347027065
|
|
PiperOrigin-RevId: 346973338
|
|
PiperOrigin-RevId: 346923826
|
|
Fixes #5004
PiperOrigin-RevId: 346643745
|
|
AtomicPtrMap is a generic concurrent map from arbitrary keys to arbitrary
pointer values.
Benchmarks:
name time/op
StoreDelete/RWMutexMap-12 335ns ± 1%
StoreDelete/SyncMap-12 705ns ± 3%
StoreDelete/AtomicPtrMap-12 287ns ± 4%
StoreDelete/AtomicPtrMapSharded-12 289ns ± 1%
LoadOrStoreDelete/RWMutexMap-12 342ns ± 2%
LoadOrStoreDelete/SyncMap-12 662ns ± 2%
LoadOrStoreDelete/AtomicPtrMap-12 290ns ± 7%
LoadOrStoreDelete/AtomicPtrMapSharded-12 293ns ± 2%
LookupPositive/RWMutexMap-12 101ns ±26%
LookupPositive/SyncMap-12 202ns ± 2%
LookupPositive/AtomicPtrMap-12 71.1ns ± 2%
LookupPositive/AtomicPtrMapSharded-12 73.2ns ± 1%
LookupNegative/RWMutexMap-12 119ns ± 1%
LookupNegative/SyncMap-12 154ns ± 1%
LookupNegative/AtomicPtrMap-12 84.7ns ± 3%
LookupNegative/AtomicPtrMapSharded-12 86.8ns ± 1%
Concurrent/FixedKeys_1PercentWrites_RWMutexMap-12 1.32µs ± 2%
Concurrent/FixedKeys_1PercentWrites_SyncMap-12 52.7ns ±10%
Concurrent/FixedKeys_1PercentWrites_AtomicPtrMap-12 31.8ns ±20%
Concurrent/FixedKeys_1PercentWrites_AtomicPtrMapSharded-12 24.0ns ±15%
Concurrent/FixedKeys_10PercentWrites_RWMutexMap-12 860ns ± 3%
Concurrent/FixedKeys_10PercentWrites_SyncMap-12 68.8ns ±20%
Concurrent/FixedKeys_10PercentWrites_AtomicPtrMap-12 98.6ns ± 7%
Concurrent/FixedKeys_10PercentWrites_AtomicPtrMapSharded-12 42.0ns ±25%
Concurrent/FixedKeys_50PercentWrites_RWMutexMap-12 1.17µs ± 3%
Concurrent/FixedKeys_50PercentWrites_SyncMap-12 136ns ±34%
Concurrent/FixedKeys_50PercentWrites_AtomicPtrMap-12 286ns ± 3%
Concurrent/FixedKeys_50PercentWrites_AtomicPtrMapSharded-12 115ns ±35%
Concurrent/ChangingKeys_1PercentWrites_RWMutexMap-12 1.27µs ± 2%
Concurrent/ChangingKeys_1PercentWrites_SyncMap-12 5.01µs ± 3%
Concurrent/ChangingKeys_1PercentWrites_AtomicPtrMap-12 38.1ns ± 3%
Concurrent/ChangingKeys_1PercentWrites_AtomicPtrMapSharded-12 22.6ns ± 2%
Concurrent/ChangingKeys_10PercentWrites_RWMutexMap-12 1.08µs ± 2%
Concurrent/ChangingKeys_10PercentWrites_SyncMap-12 5.97µs ± 1%
Concurrent/ChangingKeys_10PercentWrites_AtomicPtrMap-12 390ns ± 2%
Concurrent/ChangingKeys_10PercentWrites_AtomicPtrMapSharded-12 93.6ns ± 1%
Concurrent/ChangingKeys_50PercentWrites_RWMutexMap-12 1.77µs ± 2%
Concurrent/ChangingKeys_50PercentWrites_SyncMap-12 8.07µs ± 2%
Concurrent/ChangingKeys_50PercentWrites_AtomicPtrMap-12 1.61µs ± 2%
Concurrent/ChangingKeys_50PercentWrites_AtomicPtrMapSharded-12 386ns ± 1%
Updates #231
PiperOrigin-RevId: 346614776
|
|
PiperOrigin-RevId: 346496532
|
|
Don't propagate arbitrary golang errors up from fusefs because errors
that don't map to an errno result in a sentry panic.
Reported-by: syzbot+697cb635346e456fddfc@syzkaller.appspotmail.com
PiperOrigin-RevId: 346220306
|