summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry
AgeCommit message (Collapse)Author
2018-10-17runsc: Support job control signals for the root container.Nicolas Lacasse
Now containers run with "docker run -it" support control characters like ^C and ^Z. This required refactoring our signal handling a bit. Signals delivered to the "runsc boot" process are turned into loader.Signal calls with the appropriate delivery mode. Previously they were always sent directly to PID 1. PiperOrigin-RevId: 217566770 Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
2018-10-17Fix PTRACE_GETREGSET write sizeMichael Pratt
The existing logic is backwards and writes iov_len == 0 for a full write. PiperOrigin-RevId: 217560377 Change-Id: I5a39c31bf0ba9063a8495993bfef58dc8ab7c5fa
2018-10-17Move Unix transport out of netstackIan Gudger
PiperOrigin-RevId: 217557656 Change-Id: I63d27635b1a6c12877279995d2d9847b6a19da9b
2018-10-15Refactor host.ConnectedEndpointIan Gudger
* Integrate recvMsg and sendMsg functions into Recv and Send respectively as they are no longer shared. * Clean up partial read/write error handling code. * Re-order code to make sense given that there is no longer a host.endpoint type. PiperOrigin-RevId: 217255072 Change-Id: Ib43fe9286452f813b8309d969be11f5fa40694cd
2018-10-15Merge host.endpoint into host.ConnectedEndpointIan Gudger
host.endpoint contained duplicated logic from the sockerpair implementation and host.ConnectedEndpoint. Remove host.endpoint in favor of a host.ConnectedEndpoint wrapped in a socketpair end. PiperOrigin-RevId: 217240096 Change-Id: I4a3d51e3fe82bdf30e2d0152458b8499ab4c987c
2018-10-15Clean up Rename and Unlink checks for EBUSY.Nicolas Lacasse
- Change Dirent.Busy => Dirent.isMountPoint. The function body is unchanged, and it is no longer exported. - fs.MayDelete now checks that the victim is not the process root. This aligns with Linux's namei.c:may_delete(). - Fix "is-ancestor" checks to actually compare all ancestors, not just the parents. - Fix handling of paths that end in dots, which are handled differently in Rename vs. Unlink. PiperOrigin-RevId: 217239274 Change-Id: I7a0eb768e70a1b2915017ce54f7f95cbf8edf1fb
2018-10-15sentry: save fs.Dirent deleted info.Zhaozhong Ni
PiperOrigin-RevId: 217155458 Change-Id: Id3265b1ec784787039e2131c80254ac4937330c7
2018-10-12runsc: Support retrieving MTU via netdevice ioctl.Kevin Krakauer
This enables ifconfig to display MTU. PiperOrigin-RevId: 216917021 Change-Id: Id513b23d9d76899bcb71b0b6a25036f41629a923
2018-10-11sentry: allow saving of unlinked files with open fds on virtual fs.Zhaozhong Ni
PiperOrigin-RevId: 216733414 Change-Id: I33cd3eb818f0c39717d6656fcdfff6050b37ebb0
2018-10-10Add seccomp filter configuration to ptrace stubs.Adin Scannell
This is a defense-in-depth measure. If the sentry is compromised, this prevents system call injection to the stubs. There is some complexity with respect to ptrace and seccomp interactions, so this protection is not really available for kernel versions < 4.8; this is detected dynamically. Note that this also solves the vsyscall emulation issue by adding in appropriate trapping for those system calls. It does mean that a compromised sentry could theoretically inject these into the stub (ignoring the trap and resume, thereby allowing execution), but they are harmless. PiperOrigin-RevId: 216647581 Change-Id: Id06c232cbac1f9489b1803ec97f83097fcba8eb8
2018-10-10Enforce message size limits and avoid host calls with too many iovecsMichael Pratt
Currently, in the face of FileMem fragmentation and a large sendmsg or recvmsg call, host sockets may pass > 1024 iovecs to the host, which will immediately cause the host to return EMSGSIZE. When we detect this case, use a single intermediate buffer to pass to the kernel, copying to/from the src/dst buffer. To avoid creating unbounded intermediate buffers, enforce message size checks and truncation w.r.t. the send buffer size. The same functionality is added to netstack unix sockets for feature parity. PiperOrigin-RevId: 216590198 Change-Id: I719a32e71c7b1098d5097f35e6daf7dd5190eff7
2018-10-10When creating a new process group, add it to the session.Nicolas Lacasse
PiperOrigin-RevId: 216554791 Change-Id: Ia6b7a2e6eaad80a81b2a8f2e3241e93ebc2bda35
2018-10-09Add new netstack metrics to the sentryIan Gudger
PiperOrigin-RevId: 216431260 Change-Id: Ia6e5c8d506940148d10ff2884cf4440f470e5820
2018-10-09Add memunit to sysinfo(2).Brian Geffon
Also properly add padding after Procs in the linux.Sysinfo structure. This will be implicitly padded to 64bits so we need to do the same. PiperOrigin-RevId: 216372907 Change-Id: I6eb6a27800da61d8f7b7b6e87bf0391a48fdb475
2018-10-08Statfs Namelen should be NAME_MAX not PATH_MAXMichael Pratt
We accidentally set the wrong maximum. I've also added PATH_MAX and NAME_MAX to the linux abi package. PiperOrigin-RevId: 216221311 Change-Id: I44805fcf21508831809692184a0eba4cee469633
2018-10-08Implement shared futexes.Jamie Liu
- Shared futex objects on shared mappings are represented by Mappable + offset, analogous to Linux's use of inode + offset. Add type futex.Key, and change the futex.Manager bucket API to use futex.Keys instead of addresses. - Extend the futex.Checker interface to be able to return Keys for memory mappings. It returns Keys rather than just mappings because whether the address or the target of the mapping is used in the Key depends on whether the mapping is MAP_SHARED or MAP_PRIVATE; this matters because using mapping target for a futex on a MAP_PRIVATE mapping causes it to stop working across COW-breaking. - futex.Manager.WaitComplete depends on atomic updates to futex.Waiter.addr to determine when it has locked the right bucket, which is much less straightforward for struct futex.Waiter.key. Switch to an atomically-accessed futex.Waiter.bucket pointer. - futex.Manager.Wake now needs to take a futex.Checker to resolve addresses for shared futexes. CLONE_CHILD_CLEARTID requires the exit path to perform a shared futex wakeup (Linux: kernel/fork.c:mm_release() => sys_futex(tsk->clear_child_tid, FUTEX_WAKE, ...)). This is a problem because futexChecker is in the syscalls/linux package. Move it to kernel. PiperOrigin-RevId: 216207039 Change-Id: I708d68e2d1f47e526d9afd95e7fed410c84afccf
2018-10-03Fix panic if FIOASYNC callback is registered and triggered without targetIan Gudger
PiperOrigin-RevId: 215674589 Change-Id: I4f8871b64c570dc6da448d2fe351cec8a406efeb
2018-10-03Implement TIOCSCTTY ioctl as a noop.Nicolas Lacasse
PiperOrigin-RevId: 215658757 Change-Id: If63b33293f3e53a7f607ae72daa79e2b7ef6fcfd
2018-10-03Add S/R support for FIOASYNCIan Gudger
PiperOrigin-RevId: 215655197 Change-Id: I668b1bc7c29daaf2999f8f759138bcbb09c4de6f
2018-10-01runsc: Support job control signals in "exec -it".Nicolas Lacasse
Terminal support in runsc relies on host tty file descriptors that are imported into the sandbox. Application tty ioctls are sent directly to the host fd. However, those host tty ioctls are associated in the host kernel with a host process (in this case runsc), and the host kernel intercepts job control characters like ^C and send signals to the host process. Thus, typing ^C into a "runsc exec" shell will send a SIGINT to the runsc process. This change makes "runsc exec" handle all signals, and forward them into the sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is associated with a particular container process in the sandbox, the signal must be associated with the same container process. One big difficulty is that the signal should not necessarily be sent to the sandbox process started by "exec", but instead must be sent to the foreground process group for the tty. For example, we may exec "bash", and from bash call "sleep 100". A ^C at this point should SIGINT sleep, not bash. To handle this, tty files inside the sandbox must keep track of their foreground process group, which is set/get via ioctls. When an incoming ContainerSignal urpc comes in, we look up the foreground process group via the tty file. Unfortunately, this means we have to expose and cache the tty file in the Loader. Note that "runsc exec" now handles signals properly, but "runs run" does not. That will come in a later CL, as this one is complex enough already. Example: root@:/usr/local/apache2# sleep 100 ^C root@:/usr/local/apache2# sleep 100 ^Z [1]+ Stopped sleep 100 root@:/usr/local/apache2# fg sleep 100 ^C root@:/usr/local/apache2# PiperOrigin-RevId: 215334554 Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
2018-10-01Add itimer types to linux package, straceMichael Pratt
PiperOrigin-RevId: 215278262 Change-Id: Icd10384c99802be6097be938196044386441e282
2018-10-01Fix possible panic in control.Processes.Nicolas Lacasse
There was a race where we checked task.Parent() != nil, and then later called task.Parent() again, assuming that it is not nil. If the task is exiting, the parent may have been set to nil in between the two calls, causing a panic. This CL changes the code to only call task.Parent() once. PiperOrigin-RevId: 215274456 Change-Id: Ib5a537312c917773265ec72016014f7bc59a5f59
2018-09-28Require AF_UNIX sockets from the goferMichael Pratt
host.endpoint already has the check, but it is missing from host.ConnectedEndpoint. PiperOrigin-RevId: 214962762 Change-Id: I88bb13a5c5871775e4e7bf2608433df8a3d348e6
2018-09-28Block for link address resolutionSepehr Raissian
Previously, if address resolution for UDP or Ping sockets required sending packets using Write in Transport layer, Resolve would return ErrWouldBlock and Write would return ErrNoLinkAddress. Meanwhile startAddressResolution would run in background. Further calls to Write using same address would also return ErrNoLinkAddress until resolution has been completed successfully. Since Write is not allowed to block and System Calls need to be interruptible in System Call layer, the caller to Write is responsible for blocking upon return of ErrWouldBlock. Now, when startAddressResolution is called a notification channel for the completion of the address resolution is returned. The channel will traverse up to the calling function of Write as well as ErrNoLinkAddress. Once address resolution is complete (success or not) the channel is closed. The caller would call Write again to send packets and check if address resolution was compeleted successfully or not. Fixes google/gvisor#5 Change-Id: Idafaf31982bee1915ca084da39ae7bd468cebd93 PiperOrigin-RevId: 214962200
2018-09-27Forward ioctl(TCSETSF) calls on host ttys to the host kernel.Nicolas Lacasse
We already forward TCSETS and TCSETSW. TCSETSF is roughly equivalent but discards pending input. The filters were relaxed to allow host ioctls with TCSETSF argument. This fixes programs like "passwd" that prevent user input from being displayed on the terminal. Before: root@b8a0240fc836:/# passwd Enter new UNIX password: 123 Retype new UNIX password: 123 passwd: password updated successfully After: root@ae6f5dabe402:/# passwd Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully PiperOrigin-RevId: 214869788 Change-Id: I31b4d1373c1388f7b51d0f2f45ce40aa8e8b0b58
2018-09-27Implement 'runsc kill --all'Fabricio Voznika
In order to implement kill --all correctly, the Sentry needs to track all tasks that belong to a given container. This change introduces ContainerID to the task, that gets inherited by all children. 'kill --all' then iterates over all tasks comparing the ContainerID field to find all processes that need to be signalled. PiperOrigin-RevId: 214841768 Change-Id: I693b2374be8692d88cc441ef13a0ae34abf73ac6
2018-09-27sentry: export cpuTime function.Zhaozhong Ni
PiperOrigin-RevId: 214798278 Change-Id: Id59d1ceb35037cda0689d3a1c4844e96c6957615
2018-09-26Return correct parent PIDFabricio Voznika
Old code was returning ID of the thread that created the child process. It should be returning the ID of the parent process instead. PiperOrigin-RevId: 214720910 Change-Id: I95715c535bcf468ecf1ae771cccd04a4cd345b36
2018-09-18Short-circuit Readdir calls on overlay files when the dirent is frozen.Nicolas Lacasse
If we have an overlay file whose corresponding Dirent is frozen, then we should not bother calling Readdir on the upper or lower files, since DirentReaddir will calculate children based on the frozen Dirent tree. A test was added that fails without this change. PiperOrigin-RevId: 213531215 Change-Id: I4d6c98f1416541a476a34418f664ba58f936a81d
2018-09-18Allow for MSG_CTRUNC in input flags for recv.Brian Geffon
PiperOrigin-RevId: 213481363 Change-Id: I8150ea20cebeb207afe031ed146244de9209e745
2018-09-18Provide better message when memfd_create fails with ENOSYSFabricio Voznika
Updates #100 PiperOrigin-RevId: 213414821 Change-Id: I90c2e6c18c54a6afcd7ad6f409f670aa31577d37
2018-09-17Remove memory usage static initFabricio Voznika
panic() during init() can be hard to debug. Updates #100 PiperOrigin-RevId: 213391932 Change-Id: Ic103f1981c5b48f1e12da3b42e696e84ffac02a9
2018-09-17runsc: Enable waiting on exited processes.Kevin Krakauer
This makes `runsc wait` behave more like waitpid()/wait4() in that: - Once a process has run to completion, you can wait on it and get its exit code. - Processes not waited on will consume memory (like a zombie process) PiperOrigin-RevId: 213358916 Change-Id: I5b5eca41ce71eea68e447380df8c38361a4d1558
2018-09-17Allow kernel.(*Task).Block to accept an extract only channelIan Gudger
PiperOrigin-RevId: 213328293 Change-Id: I4164133e6f709ecdb89ffbb5f7df3324c273860a
2018-09-17Allow NULL data in mount(2)Michael Pratt
PiperOrigin-RevId: 213315267 Change-Id: I7562bcd81fb22e90aa9c7dd9eeb94803fcb8c5af
2018-09-14Avoid reuse of pending SignalInfo objectsnewmanwang
runApp.execute -> Task.SendSignal -> sendSignalLocked -> sendSignalTimerLocked -> pendingSignals.enqueue assumes that it owns the arch.SignalInfo returned from platform.Context.Switch. On the other hand, ptrace.context.Switch assumes that it owns the returned SignalInfo and can safely reuse it on the next call to Switch. The KVM platform always returns a unique SignalInfo. This becomes a problem when the returned signal is not immediately delivered, allowing a future signal in Switch to change the previous pending SignalInfo. This is noticeable in #38 when external SIGINTs are delivered from the PTY slave FD. Note that the ptrace stubs are in the same process group as the sentry, so they are eligible to receive the PTY signals. This should probably change, but is not the only possible cause of this bug. Updates #38 Original change by newmanwang <wcs1011@gmail.com>, updated by Michael Pratt <mpratt@google.com>. Change-Id: I5383840272309df70a29f67b25e8221f933622cd PiperOrigin-RevId: 213071072
2018-09-14Reuse readlink parameter, add sockaddr max.Michael Pratt
PiperOrigin-RevId: 213058623 Change-Id: I522598c655d633b9330990951ff1c54d1023ec29
2018-09-14Make gVisor hard link check match Linux's.Nicolas Lacasse
Linux permits hard-linking if the target is owned by the user OR the target has Read+Write permission. PiperOrigin-RevId: 213024613 Change-Id: If642066317b568b99084edd33ee4e8822ec9cbb3
2018-09-14Fix interaction between rt_sigtimedwait and ignored signals.Jamie Liu
PiperOrigin-RevId: 213011782 Change-Id: I716c6ea3c586b0c6c5a892b6390d2d11478bc5af
2018-09-13platform/kvm: Get max vcpu number dynamically by ioctlChenggang
The old kernel version, such as 4.4, only support 255 vcpus. While gvisor is ran on these kernels, it could panic because the vcpu id and vcpu number beyond max_vcpus. Use ioctl(vmfd, _KVM_CHECK_EXTENSION, _KVM_CAP_MAX_VCPUS) to get max vcpus number dynamically. Change-Id: I50dd859a11b1c2cea854a8e27d4bf11a411aa45c PiperOrigin-RevId: 212929704
2018-09-13Plumb monotonic time to netstackIan Gudger
Netstack needs to be portable, so this seems to be preferable to using raw system calls. PiperOrigin-RevId: 212917409 Change-Id: I7b2073e7db4b4bf75300717ca23aea4c15be944c
2018-09-13Extend memory usage events to report mapped memory usage.Rahat Mahmood
PiperOrigin-RevId: 212887555 Change-Id: I3545383ce903cbe9f00d9b5288d9ef9a049b9f4f
2018-09-13Format struct itimerspecMichael Pratt
PiperOrigin-RevId: 212874745 Change-Id: I0c3e8e6a9e8976631cee03bf0b8891b336ddb8c8
2018-09-13initArgs must hold a reference on the Root if it is not nil.Nicolas Lacasse
The contract in ExecArgs says that a reference on ExecArgs.Root must be held for the lifetime of the struct, but the caller is free to drop the ref after that. As a result, proc.Exec must take an additional ref on Root when it constructs the CreateProcessArgs, since that holds a pointer to Root as well. That ref is dropped in CreateProcess. PiperOrigin-RevId: 212828348 Change-Id: I7f44a612f337ff51a02b873b8a845d3119408707
2018-09-12runsc: Add exec flag that specifies where to save the sandbox-internal pid.Kevin Krakauer
This is different from the existing -pid-file flag, which saves a host pid. PiperOrigin-RevId: 212713968 Change-Id: I2c486de8dd5cfd9b923fb0970165ef7c5fc597f0
2018-09-11platform: Pass device fd into platform constructor.Nicolas Lacasse
We were previously openining the platform device (i.e. /dev/kvm) inside the platfrom constructor (i.e. kvm.New). This requires that we have RW access to the platform device when constructing the platform. However, now that the runsc sandbox process runs as user "nobody", it is not able to open the platform device. This CL changes the kvm constructor to take the platform device FD, rather than opening the device file itself. The device file is opened outside of the sandbox and passed to the sandbox process. PiperOrigin-RevId: 212505804 Change-Id: I427e1d9de5eb84c84f19d513356e1bb148a52910
2018-09-10Map committed chunks concurrently in FileMem.LoadFrom.Jamie Liu
PiperOrigin-RevId: 212345401 Change-Id: Iac626ee87ba312df88ab1019ade6ecd62c04c75c
2018-09-10Allow '/dev/zero' to be mapped with unaligned lengthFabricio Voznika
PiperOrigin-RevId: 212321271 Change-Id: I79d71c2e6f4b8fcd3b9b923fe96c2256755f4c48
2018-09-07Update cleanup TODOMichael Pratt
PiperOrigin-RevId: 212068327 Change-Id: I3f360cdf7d6caa1c96fae68ae3a1caaf440f0cbe
2018-09-07runsc: Support multi-container exec.Nicolas Lacasse
We must use a context.Context with a Root Dirent that corresponds to the container's chroot. Previously we were using the root context, which does not have a chroot. Getting the correct context required refactoring some of the path-lookup code. We can't lookup the path without a context.Context, which requires kernel.CreateProcArgs, which we only get inside control.Execute. So we have to do the path lookup much later than we previously were. PiperOrigin-RevId: 212064734 Change-Id: I84a5cfadacb21fd9c3ab9c393f7e308a40b9b537
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 00:20:07 +0000