Age | Commit message (Collapse) | Author |
|
Signed-off-by: Howard Zhang <howard.zhang@arm.com>
|
|
Reported-by: syzbot+7406eef8247cb5a20855@syzkaller.appspotmail.com
PiperOrigin-RevId: 337974474
|
|
Reported-by: syzbot+078580ce5dd6d607fcd8@syzkaller.appspotmail.com
Reported-by: syzbot+2096681f6891e7bf8aed@syzkaller.appspotmail.com
PiperOrigin-RevId: 337973519
|
|
- Check the sticky bit in overlay.filesystem.UnlinkAt(). Fixes
StickyTest.StickyBitPermDenied.
- When configuring a VFS2 overlay in runsc, copy the lower layer's root
owner/group/mode to the upper layer's root (as in the VFS1 equivalent,
boot.addOverlay()). This makes the overlay root owned by UID/GID 65534 with
mode 0755 rather than owned by UID/GID 0 with mode 01777. Fixes
CreateTest.CreateFailsOnUnpermittedDir, which assumes that the test cannot
create files in /.
- MknodTest.UnimplementedTypesReturnError assumes that the creation of device
special files is not supported. However, while the VFS2 gofer client still
doesn't support device special files, VFS2 tmpfs does, and in the overlay
test dimension mknod() targets a tmpfs upper layer. The test initially has
all capabilities, including CAP_MKNOD, so its creation of these files
succeeds. Constrain these tests to VFS1.
- Rename overlay.nonDirectoryFD to overlay.regularFileFD and only use it for
regular files, using the original FD for pipes and device special files. This
is more consistent with Linux (which gets the original inode_operations, and
therefore file_operations, for these file types from ovl_fill_inode() =>
init_special_inode()) and fixes remaining mknod and pipe tests.
- Read/write 1KB at a time in PipeTest.Streaming, rather than 4 bytes. This
isn't strictly necessary, but it makes the test less obnoxiously slow on
ptrace.
Fixes #4407
PiperOrigin-RevId: 337971042
|
|
PiperOrigin-RevId: 337919424
|
|
Reported-by: syzbot+0268cc591c0f517a1de0@syzkaller.appspotmail.com
PiperOrigin-RevId: 337901664
|
|
This change makes the following changes:
- Unlocks MemoryFile.mu while calling mincore (checkCommitted) because mincore
can take a really long time. Accordingly looks up the segment in the tree
tree again and handles changes to the segment.
- MemoryFile.UpdateUsage() can now only be called at frequency at most 100Hz.
100 Hz = linux.CLOCKS_PER_SEC.
Co-authored-by: Jamie Liu <jamieliu@google.com>
PiperOrigin-RevId: 337865250
|
|
PiperOrigin-RevId: 337544656
|
|
Reported-by: syzbot+5466463b7604c2902875@syzkaller.appspotmail.com
PiperOrigin-RevId: 337451896
|
|
PiperOrigin-RevId: 337384146
|
|
Control messages should be released on Read (which ignores the control message)
or zero-byte Send. Otherwise, open fds sent through the control messages will
be leaked.
PiperOrigin-RevId: 337110774
|
|
All shm segments in an IPC namespace should be released once that namespace is
destroyed. Add reference counting to IPCNamespace so that once the last task
with a reference on it exits, we can trigger a destructor that will clean up
all shm segments that have not been explicitly freed by the application.
PiperOrigin-RevId: 337032977
|
|
PiperOrigin-RevId: 336976081
|
|
PiperOrigin-RevId: 336970511
|
|
PiperOrigin-RevId: 336962937
|
|
The sentry page cache stores file contents at page granularity; this is
necessary for memory mappings. Thus file offset ranges passed to
fsutil.FileRangeSet.Fill() must be page-aligned. If the read callback passed to
Fill() returns (partial read, nil error) when reading up to EOF (which is the
case for p9.ClientFile.ReadAt() since 9P's Rread cannot convey both a partial
read and EOF), Fill() will re-invoke the read callback to try to read from EOF
to the end of the containing page, which is harmless but needlessly expensive.
Fix this by handling file size explicitly in fsutil.FileRangeSet.Fill().
PiperOrigin-RevId: 336934075
|
|
This fixes reference leaks related to accidentally forgetting to DecRef()
after calling one or the other.
PiperOrigin-RevId: 336918922
|
|
The required states may simply not be observed by the thread running bounce, so
track guest and user generations to ensure that at least one of the desired
state transitions happens.
Fixes #3532
PiperOrigin-RevId: 336908216
|
|
In addition to fixing reference leaks, this change also releases memory used
by regular tmpfs files once the containing filesystem is released.
PiperOrigin-RevId: 336833111
|
|
Singleton filesystem like devpts and devtmpfs have a single filesystem shared
among all mounts, so they acquire a "self-reference" when initialized that
must be released when the entire virtual filesystem is released at sandbox
exit.
PiperOrigin-RevId: 336828852
|
|
PiperOrigin-RevId: 336822021
|
|
verity Mu should be per file system instead of global, so that enabling
and verifying in different file systems won't block each other.
Also Lock verity Mu in PRead.
PiperOrigin-RevId: 336779356
|
|
Merkle tree library was originally using Read/Seek to access data and
tree, since the parameters are io.ReadSeeker. This could cause race
conditions if multiple threads accesses the same fd to read. Here we
change to use ReaderAt, and implement it with PRead to make it thread
safe.
PiperOrigin-RevId: 336779260
|
|
This change aims to fix the memory leak issue reported inĀ #3933.
Background:
VFS2 kernfs kept accumulating invalid dentries if those dentries were not
walked on. After substantial consideration of the problem by our team, we
decided to have an LRU cache solution. This change is the first part to that
solution, where we don't cache anything. The LRU cache can be added on top of
this.
What has changed:
- Introduced the concept of an inode tree in kernfs.OrderedChildren.
This is helpful is cases where the lifecycle of an inode is different from
that of a dentry.
- OrderedChildren now deals with initialized inodes instead of initialized
dentries. It now implements Lookup() where it constructs a new dentry
using the inode.
- OrderedChildren holds a ref on all its children inodes. With this change,
now an inode can "outlive" a dentry pointing to it. See comments in
kernfs.OrderedChildren.
- The kernfs dentry tree is solely maintained by kernfs only. Inode
implementations can not modify the dentry tree.
- Dentries that reach ref count 0 are removed from the dentry tree.
- revalidateChildLocked now defer-DecRefs the newly created dentry from
Inode.Lookup(), limiting its life to the current filesystem operation. If
refs are picked on the dentry during the FS op (via an FD or something),
then it will stick around and will be removed when the FD is closed. So there
is essentially _no caching_ for Look()ed up dentries.
- kernfs.DecRef does not have the precondition that fs.mu must be locked.
Fixes #3933
PiperOrigin-RevId: 336768576
|
|
PiperOrigin-RevId: 336719900
|
|
PiperOrigin-RevId: 336694658
|
|
The tls of guest-el1-sentry and host-el0-sentry may be different on Arm64.
I added a solution for it.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
Signed-off-by: Min Le <lemin.lm@antgroup.com>
|
|
PiperOrigin-RevId: 336395445
|
|
PiperOrigin-RevId: 336366624
|
|
PiperOrigin-RevId: 336362818
|
|
- sysinfo(2) does not actually require a fine-grained breakdown of memory
usage. Accordingly, instead of calling pgalloc.MemoryFile.UpdateUsage() to
update the sentry's fine-grained memory accounting snapshot, just use
pgalloc.MemoryFile.TotalUsage() (which is a single fstat(), and therefore far
cheaper).
- Use the number of threads in the root PID namespace (i.e. globally) rather
than in the task's PID namespace for consistency with Linux (which just reads
global variable nr_threads), and add a new method to kernel.PIDNamespace to
allow this to be read directly from an underlying map rather than requiring
the allocation and population of an intermediate slice.
PiperOrigin-RevId: 336353100
|
|
PiperOrigin-RevId: 336339194
|
|
Reported-by: syzbot+bb82fb556d5d0a43f632@syzkaller.appspotmail.com
PiperOrigin-RevId: 336324720
|
|
PiperOrigin-RevId: 336304024
|
|
cf. 2a36ab717e8f "rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ"
PiperOrigin-RevId: 336186795
|
|
When a response needs to be sent to an incoming packet, the stack should
consult its neighbour table to determine the remote address's link
address.
When an entry does not exist in the stack's neighbor table, the stack
should queue the packet while link resolution completes. See comments.
PiperOrigin-RevId: 336185457
|
|
the correct value needed is 0xbbff440c0400 but the const
defined is 0x000000000000ffc0 due to the operator error
in _MT_EL1_INIT, both kernel and user space memory
attribute should be Normal memory not DEVICE_nGnRE
Signed-off-by: Min Le <lemin.lm@antgroup.com>
|
|
This change also adds support to go_stateify for detecting an appropriate
receiver name, avoiding a large number of false positives.
PiperOrigin-RevId: 335994587
|
|
PiperOrigin-RevId: 335930035
|
|
By using TSC scaling as a hack, we can trick the kernel into setting an offset
of exactly zero. Huzzah!
PiperOrigin-RevId: 335922019
|
|
Updates #267
PiperOrigin-RevId: 335713923
|
|
PiperOrigin-RevId: 335583637
|
|
PiperOrigin-RevId: 335548610
|
|
PiperOrigin-RevId: 335532690
|
|
PiperOrigin-RevId: 335492800
|
|
- When the KCOV_ENABLE_TRACE ioctl is called with the trace kind KCOV_TRACE_PC,
the kcov mode should be set to KCOV_*MODE*_TRACE_PC.
- When the owning task of kcov exits, the memory mapping should not be cleared
so it can be used by other tasks.
- Add more tests (also tested on native Linux kcov).
PiperOrigin-RevId: 335202585
|
|
Before we thought that interrupts are always disabled in the kernel
space, but here is a case when goruntime switches on a goroutine which
has been saved in the host mode. On restore, the popf instruction is
used to restore flags and this means that all flags what the goroutine
has in the host mode will be restored in the kernel mode. And in the
host mode, interrupts are always enabled.
The long story short, we can't use the IF flag for determine whether a
tasks is running in user or kernel mode.
This patch reworks the code so that in userspace, the first bit of the
IOPL flag will be always set. This doesn't give any new privilidges for
a task because CPL in userspace is always 3. But then we can use this
flag to distinguish user and kernel modes. The IOPL flag is never set in
the kernel and host modes.
Reported-by: syzbot+5036b325a8eb15c030cf@syzkaller.appspotmail.com
Reported-by: syzbot+034d580e89ad67b8dc75@syzkaller.appspotmail.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
|
|
PiperOrigin-RevId: 335077195
|
|
PiperOrigin-RevId: 335051794
|