summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/vfs
AgeCommit message (Collapse)Author
2020-03-16Add calls to vfs.CheckSetStat to fsimplsFabricio Voznika
Only gofer filesystem was calling vfs.CheckSetStat for vfs.FilesystemImpl.SetStatAt and vfs.FileDescriptionImpl.SetStat. Updates #1193, #1672, #1197 PiperOrigin-RevId: 301226522
2020-03-13Implement access/faccessat for VFS2.Dean Deng
Note that the raw faccessat system call does not actually take a flags argument; according to faccessat(2), the glibc wrapper implements the flags by using fstatat(2). Remove the flag argument that we try to extract from vfs1, which would just be a garbage value. Updates #1965 Fixes #2101 PiperOrigin-RevId: 300796067
2020-03-13Add support for mount flagsFabricio Voznika
Plumbs MS_NOEXEC and MS_RDONLY. Others are TODO. Updates #1623 #1193 PiperOrigin-RevId: 300764669
2020-03-06Add plumbing for importing fds in VFS2, along with non-socket, non-TTY impl.Dean Deng
In VFS2, imported file descriptors are stored in a kernfs-based filesystem. Upon calling ImportFD, the host fd can be accessed in two ways: 1. a FileDescription that can be added to the FDTable, and 2. a Dentry in the host.filesystem mount, which we will want to access through magic symlinks in /proc/[pid]/fd/. An implementation of the kernfs.Inode interface stores a unique host fd. This inode can be inserted into file descriptions as well as dentries. This change also plumbs in three FileDescriptionImpls corresponding to fds for sockets, TTYs, and other files (only the latter is implemented here). These implementations will mostly make corresponding syscalls to the host. Where possible, the logic is ported over from pkg/sentry/fs/host. Updates #1672 PiperOrigin-RevId: 299417263
2020-02-25Add VFS.NewDisconnectedMount().Jamie Liu
Analogous to Linux's kern_mount(). PiperOrigin-RevId: 297259580
2020-02-25Port most syscalls to VFS2.Jamie Liu
pipe and pipe2 aren't ported, pending a slight rework of pipe FDs for VFS2. mount and umount2 aren't ported out of temporary laziness. access and faccessat need additional FSImpl methods to implement properly, but are stubbed to prevent googletest from CHECK-failing. Other syscalls require additional plumbing. Updates #1623 PiperOrigin-RevId: 297188448
2020-02-14Remove linux.EpollEvent.Fd.gVisor bot
glibc defines struct epoll_event in such a way that epoll_event.data.fd exists. However, the kernel's definition of struct epoll_event makes epoll_event.data an opaque uint64, so naming half of it "fd" just introduces confusion. Remove the Fd field, and make Data a [2]int32 to compensate. Also add required padding to linux.EpollEvent on ARM64. PiperOrigin-RevId: 295250424
2020-02-14Allow vfs.IterDirentsCallback.Handle() to return an error.gVisor bot
This is easier than storing errors from e.g. CopyOut in the callback. PiperOrigin-RevId: 295230021
2020-02-14Inline vfs.VirtualFilesystem in Kernel structgVisor bot
This saves one pointer dereference per VFS access. Updates #1623 PiperOrigin-RevId: 295216176
2020-02-14Plumb VFS2 inside the SentrygVisor bot
- Added fsbridge package with interface that can be used to open and read from VFS1 and VFS2 files. - Converted ELF loader to use fsbridge - Added VFS2 types to FSContext - Added vfs.MountNamespace to ThreadGroup Updates #1623 PiperOrigin-RevId: 295183950
2020-02-13Add FileExec flag to OpenOptionsgVisor bot
This allow callers to say whether the file is being opened to be executed, so that the proper checks can be done from FilesystemImpl.OpenAt() Updates #1623 PiperOrigin-RevId: 295042595
2020-02-04Remove argument from vfs.MountNamespace.DecRef()Fabricio Voznika
Updates #1035 PiperOrigin-RevId: 293194631
2020-01-31Implement file locks for regular tmpfs files in VFSv2.Dean Deng
Add a file lock implementation that can be embedded into various filesystem implementations. Updates #1480 PiperOrigin-RevId: 292614758
2020-01-29Add plumbing for file locks in VFS2.Dean Deng
Updates #1480 PiperOrigin-RevId: 292180192
2020-01-28Add support for WritableSource in DynamicBytesFileDescriptionImplFabricio Voznika
WritableSource is a convenience interface used for files that can be written to, e.g. /proc/net/ipv4/tpc_sack. It reads max of 4KB and only from offset 0 which should cover most cases. It can be extended as neeed. Updates #1195 PiperOrigin-RevId: 292056924
2020-01-28Add VFS2 support for epoll.Jamie Liu
PiperOrigin-RevId: 291997879
2020-01-28Implement an anon_inode equivalent for VFS2.Jamie Liu
PiperOrigin-RevId: 291986033
2020-01-27Update package locations.Adin Scannell
Because the abi will depend on the core types for marshalling (usermem, context, safemem, safecopy), these need to be flattened from the sentry directory. These packages contain no sentry-specific details. PiperOrigin-RevId: 291811289
2020-01-27Standardize on tools directory.Adin Scannell
PiperOrigin-RevId: 291745021
2020-01-24Add anonymous device number allocation to VFS2.Jamie Liu
Note that in VFS2, filesystem device numbers are per-vfs.FilesystemImpl rather than global, avoiding the need for a "registry" type to handle save/restore. (This is more consistent with Linux anyway: compare e.g. mm/shmem.c:shmem_mount() => fs/super.c:mount_nodev() => (indirectly) set_anon_super().) PiperOrigin-RevId: 291425193
2020-01-22Move VFS2 handling of FD readability/writability to vfs.FileDescription.Jamie Liu
PiperOrigin-RevId: 291006713
2020-01-16Add more files to /proc/[pid]/*Fabricio Voznika
Files not implemented require VFSv2 plumbing into the kernel. Also, cgroup is not implemented yet. Updates #1195 PiperOrigin-RevId: 290129176
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2019-12-30Add VFS2 support for device special files.Jamie Liu
- Add FileDescriptionOptions.UseDentryMetadata, which reduces the amount of boilerplate needed for device FDs and the like between filesystems. - Switch back to having FileDescription.Init() take references on the Mount and Dentry; otherwise managing refcounts around failed calls to OpenDeviceSpecialFile() / Device.Open() is tricky. PiperOrigin-RevId: 287575574
2019-12-27Add VFS2 support for /proc/filesystems.Jamie Liu
Updates #1195 PiperOrigin-RevId: 287269106
2019-12-26Initial procfs implementation in VFSv2Fabricio Voznika
Updates #1195 PiperOrigin-RevId: 287227722
2019-12-23Clean up vfs.FilesystemImpl methods that operate on parent directories.Jamie Liu
- Make FilesystemImpl methods that operate on parent directories require !rp.Done() (i.e. there is at least one path component to resolve) as precondition and postcondition (in cases where they do not finish path resolution due to mount boundary / absolute symlink), and require that they do not need to follow the last path component (the file being created / deleted) as a symlink. Check for these in VFS. - Add FilesystemImpl.GetParentDentryAt(), which is required to obtain the old parent directory for VFS.RenameAt(). (Passing the Dentry to be renamed instead has the wrong semantics if the file named by the old path is a mount point since the Dentry will be on the wrong Mount.) - Update memfs to implement these methods correctly (?), including RenameAt. - Change fspath.Parse() to allow empty paths (to simplify implementation of AT_EMPTY_PATH). - Change vfs.PathOperation to take a fspath.Path instead of a raw pathname; non-test callers will need to fspath.Parse() pathnames themselves anyway in order to detect absolute paths and select PathOperation.Start accordingly. PiperOrigin-RevId: 286934941
2019-12-20Add vfs.ResolvingPath.HandleJump().Jamie Liu
PiperOrigin-RevId: 286666533
2019-12-20Add vfs.Dentry.Children().Jamie Liu
PiperOrigin-RevId: 286660774
2019-12-20Move VFS2 file description status flags to vfs.FileDescription.Jamie Liu
PiperOrigin-RevId: 286616668
2019-12-18Add VFS2 plumbing for extended attributes.Jamie Liu
PiperOrigin-RevId: 286281274
2019-12-12Implement memmap.MappingIdentity for vfs.FileDescription.Jamie Liu
PiperOrigin-RevId: 285255855
2019-12-11Add vfs.Pathname{WithDeleted,ForGetcwd}.Jamie Liu
The former is needed for vfs.FileDescription to implement memmap.MappingIdentity, and the latter is needed to implement getcwd(2). PiperOrigin-RevId: 285051855
2019-12-10Add most VFS methods for syscalls.Jamie Liu
PiperOrigin-RevId: 284892289
2019-12-05Add vfs.CheckSetStat() and its dependencies.Jamie Liu
PiperOrigin-RevId: 284033820
2019-11-25Minor VFS2 interface changes.Jamie Liu
- Remove the Filesystem argument from DentryImpl.*Ref(); in general DentryImpls that need the Filesystem for reference counting will probably also need it for other interface methods that don't plumb Filesystem, so it's easier to just store a pointer to the filesystem in the DentryImpl. - Add a pointer to the VirtualFilesystem to Filesystem, which is needed by the gofer client to disown dentries for cache eviction triggered by dentry reference count changes. - Rename FilesystemType.NewFilesystem to GetFilesystem; in some cases (e.g. sysfs, cgroupfs) it's much cleaner for there to be only one Filesystem that is used by all mounts, and in at least one case (devtmpfs) it's visibly incorrect not to do so, so NewFilesystem doesn't always actually create and return a *new* Filesystem. - Require callers of FileDescription.Init() to increment Mount/Dentry references. This is because the gofer client may, in the OpenAt() path, take a reference on a dentry with 0 references, which is safe due to synchronization that is outside the scope of this CL, and it would be safer to still have its implementation of DentryImpl.IncRef() check for an increment for 0 references in other cases. - Add FileDescription.TryIncRef. This is used by the gofer client to take references on "special file descriptions" (FDs for files such as pipes, sockets, and devices), which use per-FD handles (fids) instead of dentry-shared handles, for sync() and syncfs(). PiperOrigin-RevId: 282473364
2019-11-25Implement basic umounting for vfs2.Jamie Liu
This is required to test filesystems with a non-trivial implementation of FilesystemImpl.Release(). Propagation isn't handled yet, and umount isn't yet plumbed out to VirtualFilesystem.UmountAt(), but otherwise the implementation of umount is believed to be correct. - Move entering mountTable.seq writer critical sections to callers of mountTable.{insert,remove}Seqed. This is required since umount(2) must ensure that no new references are taken on the candidate mount after checking that it isn't busy, which is only possible by entering a vfs.mountTable.seq writer critical section before the check and remaining in it until after VFS.umountRecursiveLocked() is complete. (Linux does the same thing: fs/namespace.c:do_umount() => lock_mount_hash(), fs/pnode.c:propagate_mount_busy(), umount_tree(), unlock_mount_hash().) - It's not possible for dentry deletion to umount while only holding VFS.mountMu for reading, but it's also very unappealing to hold VFS.mountMu exclusively around e.g. gofer unlink RPCs. Introduce dentry.mu to avoid these problems. This means that VFS.mountMu is never acquired for reading, so change it to a sync.Mutex. PiperOrigin-RevId: 282444343
2019-11-21Import and structure cleanup.Adin Scannell
PiperOrigin-RevId: 281795269
2019-11-18Add vfs.GenericParseMountOptions().Jamie Liu
Equivalent to fs.GenericMountSourceOptions(). PiperOrigin-RevId: 281179287
2019-10-29Update build tags to allow Go 1.14Michael Pratt
Currently there are no ABI changes. We should check again closer to release. PiperOrigin-RevId: 277349744
2019-10-19Add support for pipes in VFS2.Kevin Krakauer
PiperOrigin-RevId: 275650307
2019-10-15Minor vfs.FileDescriptionImpl fixes.Jamie Liu
- Pass context.Context to OnClose(). - Pass memmap.MMapOpts to ConfigureMMap() by pointer so that implementations can actually mutate it as required. PiperOrigin-RevId: 274934967
2019-10-04Change linux.FileMode from uint to uint16, and update VFS to use FileMode.Kevin Krakauer
In Linux (include/linux/types.h), mode_t is an unsigned short. PiperOrigin-RevId: 272956350
2019-09-20Change vfs.Dirent.Off to NextOff.Jamie Liu
"d_off is the distance from the start of the directory to the start of the next linux_dirent." - getdents(2). PiperOrigin-RevId: 270349685
2019-09-12Remove go_test from go_stateify and go_marshalMichael Pratt
They are no-ops, so the standard rule works fine. PiperOrigin-RevId: 268776264
2019-08-16vfs: Remove vfs.DefaultDirectoryFD from embedding vfs.DefaultFD.Ayush Ranjan
This fixes the implementation ambiguity issues when a filesystem implementation embeds vfs.DefaultDirectoryFD to its directory FD along with an internal common fileDescription utility. For similar reasons also removes FileDescriptionDefaultImpl from DynamicBytesFileDescriptionImpl. PiperOrigin-RevId: 263795513
2019-08-13Add vfs.DynamicBytesFileDescriptionImpl.Jamie Liu
This replaces fs/proc/seqfile for vfs2-based filesystems. PiperOrigin-RevId: 263254647
2019-07-18Sentry virtual filesystem, v2Jamie Liu
Major differences from the current ("v1") sentry VFS: - Path resolution is Filesystem-driven (FilesystemImpl methods call vfs.ResolvingPath methods) rather than VFS-driven (fs package owns a Dirent tree and calls fs.InodeOperations methods to populate it). This drastically improves performance, primarily by reducing overhead from inefficient synchronization and indirection. It also makes it possible to implement remote filesystem protocols that translate FS system calls into single RPCs, rather than having to make (at least) one RPC per path component, significantly reducing the latency of remote filesystems (especially during cold starts and for uncacheable shared filesystems). - Mounts are correctly represented as a separate check based on contextual state (current mount) rather than direct replacement in a fs.Dirent tree. This makes it possible to support (non-recursive) bind mounts and mount namespaces. Included in this CL is fsimpl/memfs, an incomplete in-memory filesystem that exists primarily to demonstrate intended filesystem implementation patterns and for benchmarking: BenchmarkVFS1TmpfsStat/1-6 3000000 497 ns/op BenchmarkVFS1TmpfsStat/2-6 2000000 676 ns/op BenchmarkVFS1TmpfsStat/3-6 2000000 904 ns/op BenchmarkVFS1TmpfsStat/8-6 1000000 1944 ns/op BenchmarkVFS1TmpfsStat/64-6 100000 14067 ns/op BenchmarkVFS1TmpfsStat/100-6 50000 21700 ns/op BenchmarkVFS2MemfsStat/1-6 10000000 197 ns/op BenchmarkVFS2MemfsStat/2-6 5000000 233 ns/op BenchmarkVFS2MemfsStat/3-6 5000000 268 ns/op BenchmarkVFS2MemfsStat/8-6 3000000 477 ns/op BenchmarkVFS2MemfsStat/64-6 500000 2592 ns/op BenchmarkVFS2MemfsStat/100-6 300000 4045 ns/op BenchmarkVFS1TmpfsMountStat/1-6 2000000 679 ns/op BenchmarkVFS1TmpfsMountStat/2-6 2000000 912 ns/op BenchmarkVFS1TmpfsMountStat/3-6 1000000 1113 ns/op BenchmarkVFS1TmpfsMountStat/8-6 1000000 2118 ns/op BenchmarkVFS1TmpfsMountStat/64-6 100000 14251 ns/op BenchmarkVFS1TmpfsMountStat/100-6 100000 22397 ns/op BenchmarkVFS2MemfsMountStat/1-6 5000000 317 ns/op BenchmarkVFS2MemfsMountStat/2-6 5000000 361 ns/op BenchmarkVFS2MemfsMountStat/3-6 5000000 387 ns/op BenchmarkVFS2MemfsMountStat/8-6 3000000 582 ns/op BenchmarkVFS2MemfsMountStat/64-6 500000 2699 ns/op BenchmarkVFS2MemfsMountStat/100-6 300000 4133 ns/op From this we can infer that, on this machine: - Constant cost for tmpfs stat() is ~160ns in VFS2 and ~280ns in VFS1. - Per-path-component cost is ~35ns in VFS2 and ~215ns in VFS1, a difference of about 6x. - The cost of crossing a mount boundary is about 80ns in VFS2 (MemfsMountStat/1 does approximately the same amount of work as MemfsStat/2, except that it also crosses a mount boundary). This is an inescapable cost of the separate mount lookup needed to support bind mounts and mount namespaces. PiperOrigin-RevId: 258853946
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 22:41:57 +0000