Age | Commit message (Collapse) | Author |
|
|
|
Linux controls socket send/receive buffers using a few sysctl variables
- net.core.rmem_default
- net.core.rmem_max
- net.core.wmem_max
- net.core.wmem_default
- net.ipv4.tcp_rmem
- net.ipv4.tcp_wmem
The first 4 control the default socket buffer sizes for all sockets
raw/packet/tcp/udp and also the maximum permitted socket buffer that can be
specified in setsockopt(SOL_SOCKET, SO_(RCV|SND)BUF,...).
The last two control the TCP auto-tuning limits and override the default
specified in rmem_default/wmem_default as well as the max limits.
Netstack today only implements tcp_rmem/tcp_wmem and incorrectly uses it
to limit the maximum size in setsockopt() as well as uses it for raw/udp
sockets.
This changelist introduces the other 4 and updates the udp/raw sockets to use
the newly introduced variables. The values for min/max match the current
tcp_rmem/wmem values and the default value buffers for UDP/RAW sockets is
updated to match the linux value of 212KiB up from the really low current value
of 32 KiB.
Updates #3043
Fixes #3043
PiperOrigin-RevId: 318089805
|
|
|
|
|
|
Test:
- TestIncrementChecksumErrors
Fixes #2943
PiperOrigin-RevId: 317348158
|
|
|
|
It accesses e.receiver which is protected by the endpoint lock.
WARNING: DATA RACE
Write at 0x00c0006aa2b8 by goroutine 189:
pkg/sentry/socket/unix/transport.(*connectionedEndpoint).Connect.func1()
pkg/sentry/socket/unix/transport/connectioned.go:359 +0x50
pkg/sentry/socket/unix/transport.(*connectionedEndpoint).BidirectionalConnect()
pkg/sentry/socket/unix/transport/connectioned.go:327 +0xa3c
pkg/sentry/socket/unix/transport.(*connectionedEndpoint).Connect()
pkg/sentry/socket/unix/transport/connectioned.go:363 +0xca
pkg/sentry/socket/unix.(*socketOpsCommon).Connect()
pkg/sentry/socket/unix/unix.go:420 +0x13a
pkg/sentry/socket/unix.(*SocketOperations).Connect()
<autogenerated>:1 +0x78
pkg/sentry/syscalls/linux.Connect()
pkg/sentry/syscalls/linux/sys_socket.go:286 +0x251
Previous read at 0x00c0006aa2b8 by goroutine 270:
pkg/sentry/socket/unix/transport.(*baseEndpoint).Connected()
pkg/sentry/socket/unix/transport/unix.go:789 +0x42
pkg/sentry/socket/unix/transport.(*connectionedEndpoint).State()
pkg/sentry/socket/unix/transport/connectioned.go:479 +0x2f
pkg/sentry/socket/unix.(*socketOpsCommon).State()
pkg/sentry/socket/unix/unix.go:714 +0xc3e
pkg/sentry/socket/unix.(*socketOpsCommon).SendMsg()
pkg/sentry/socket/unix/unix.go:466 +0xc44
pkg/sentry/socket/unix.(*SocketOperations).SendMsg()
<autogenerated>:1 +0x173
pkg/sentry/syscalls/linux.sendTo()
pkg/sentry/syscalls/linux/sys_socket.go:1121 +0x4c5
pkg/sentry/syscalls/linux.SendTo()
pkg/sentry/syscalls/linux/sys_socket.go:1134 +0x87
Reported-by: syzbot+c2be37eedc672ed59a86@syzkaller.appspotmail.com
PiperOrigin-RevId: 317236996
|
|
|
|
Metadata was useful for debugging and safety, but enough tests exist that we
should see failures when (de)serialization is broken. It made stack
initialization more cumbersome and it's also getting in the way of ip6tables.
PiperOrigin-RevId: 317210653
|
|
|
|
Updates #2972
PiperOrigin-RevId: 317113059
|
|
|
|
Updates #173,#6
Fixes #2888
PiperOrigin-RevId: 317087652
|
|
|
|
- Change FileDescriptionImpl Lock/UnlockPOSIX signature to
take {start,length,whence}, so the correct offset can be
calculated in the implementations.
- Create PosixLocker interface to make it possible to share
the same locking code from different implementations.
Closes #1480
PiperOrigin-RevId: 316910286
|
|
|
|
TCP_KEEPCNT is used to set the maximum keepalive probes to be
sent before dropping the connection.
WANT_LGTM=jchacon
PiperOrigin-RevId: 315758094
|
|
|
|
In case of SOCK_SEQPACKET, it has to be ignored.
In case of SOCK_STREAM, EISCONN or EOPNOTSUPP has to be returned.
PiperOrigin-RevId: 315755972
|
|
|
|
LockFD is the generic implementation that can be embedded in
FileDescriptionImpl implementations. Unique lock ID is
maintained in vfs.FileDescription and is created on demand.
Updates #1480
PiperOrigin-RevId: 315604825
|
|
|
|
Netstack has traditionally parsed headers on-demand as a packet moves up the
stack. This is conceptually simple and convenient, but incompatible with
iptables, where headers can be inspected and mangled before even a routing
decision is made.
This changes header parsing to happen early in the incoming packet path, as soon
as the NIC gets the packet from a link endpoint. Even if an invalid packet is
found (e.g. a TCP header of insufficient length), the packet is passed up the
stack for proper stats bookkeeping.
PiperOrigin-RevId: 315179302
|
|
|
|
For TCP sockets gVisor incorrectly returns EAGAIN when no ephemeral ports are
available to bind during a connect. Linux returns EADDRNOTAVAIL. This change
fixes gVisor to return the correct code and adds a test for the same.
This change also fixes a minor bug for ping sockets where connect() would fail
with EINVAL unless the socket was bound first.
Also added tests for testing UDP Port exhaustion and Ping socket port
exhaustion.
PiperOrigin-RevId: 314988525
|
|
|
|
IPTables.connections contains a sync.RWMutex. Copying it will trigger copylocks
analysis. Tested by manually enabling nogo tests.
sync.RWMutex is added to IPTables for the additional race condition discovered.
PiperOrigin-RevId: 314817019
|
|
|
|
Historically we've been passing PacketBuffer by shallow copying through out
the stack. Right now, this is only correct as the caller would not use
PacketBuffer after passing into the next layer in netstack.
With new buffer management effort in gVisor/netstack, PacketBuffer will
own a Buffer (to be added). Internally, both PacketBuffer and Buffer may
have pointers and shallow copying shouldn't be used.
Updates #2404.
PiperOrigin-RevId: 314610879
|
|
|
|
PiperOrigin-RevId: 314450191
|
|
|
|
|
|
|
|
On native Linux, calling recv/read right after send/write sometimes returns
EWOULDBLOCK, if the data has not made it to the receiving socket (even though
the endpoints are on the same host). Poll before reading to avoid this.
Making this change also uncovered a hostinet bug (gvisor.dev/issue/2726),
which is noted in this CL.
PiperOrigin-RevId: 312320587
|
|
|
|
* Aggregate architecture Overview in "What is gVisor?" as it makes more sense
in one place.
* Drop "user-space kernel" and use "application kernel". The term "user-space
kernel" is confusing when some platform implementation do not run in
user-space (instead running in guest ring zero).
* Clear up the relationship between the Platform page in the user guide and the
Platform page in the architecture guide, and ensure they are cross-linked.
* Restore the call-to-action quick start link in the main page, and drop the
GitHub link (which also appears in the top-right).
* Improve image formatting by centering all doc and blog images, and move the
image captions to the alt text.
PiperOrigin-RevId: 311845158
|
|
|
|
This change adds support for TCP_SYNCNT and TCP_WINDOW_CLAMP options
in GetSockOpt/SetSockOpt. This change does not really change any
behaviour in Netstack and only stores/returns the stored value.
Actual honoring of these options will be added as required.
Fixes #2626, #2625
PiperOrigin-RevId: 311453777
|
|
|
|
PiperOrigin-RevId: 311203776
|
|
|
|
PiperOrigin-RevId: 311181084
|
|
|
|
kernel.Task.Block() requires that the caller is running on the task goroutine.
netstack.SocketOperations.Write() uses kernel.TaskFromContext() to call
kernel.Task.Block() even if it's not running on the task goroutine. Stop doing
that.
PiperOrigin-RevId: 311178335
|
|
- Added support for matching gid owner and invert flag for uid
and gid.
$ iptables -A OUTPUT -p tcp -m owner --gid-owner root -j ACCEPT
$ iptables -A OUTPUT -p tcp -m owner ! --uid-owner root -j ACCEPT
$ iptables -A OUTPUT -p tcp -m owner ! --gid-owner root -j DROP
- Added tests for uid, gid and invert flags.
|
|
We weren't properly checking whether the inserted default rule was
unconditional.
|
|
|
|
Enables commands with -o (--out-interface) for iptables rules.
$ iptables -A OUTPUT -o eth0 -j ACCEPT
PiperOrigin-RevId: 310642286
|
|
|