summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/socket
AgeCommit message (Collapse)Author
2021-01-14Add stats for ARPArthur Sfez
Fixes #4963 Startblock: has LGTM from sbalana and then add reviewer ghanan PiperOrigin-RevId: 351886320
2021-01-13Do not resolve remote link address at transport layerGhanan Gowripalan
Link address resolution is performed at the link layer (if required) so we can defer it from the transport layer. When link resolution is required, packets will be queued and sent once link resolution completes. If link resolution fails, the transport layer will receive a control message indicating that the stack failed to route the packet. tcpip.Endpoint.Write no longer returns a channel now that writes do not wait for link resolution at the transport layer. tcpip.ErrNoLinkAddress is no longer used so it is removed. Removed calls to stack.Route.ResolveWith from the transport layer so that link resolution is performed when a route is created in response to an incoming packet (e.g. to complete TCP handshakes or send a RST). Tests: - integration_test.TestForwarding - integration_test.TestTCPLinkResolutionFailure Fixes #4458 RELNOTES: n/a PiperOrigin-RevId: 351684158
2021-01-12Remove useless cached stateTamir Duberstein
Simplify some logic while I'm here. PiperOrigin-RevId: 351491593
2021-01-12Fix simple mistakes identified by goreportcard.Adin Scannell
These are primarily simplification and lint mistakes. However, minor fixes are also included and tests added where appropriate. PiperOrigin-RevId: 351425971
2021-01-07netstack: Refactor tcpip.Endpoint.ReadTing-Yu Wang
Read now takes a destination io.Writer, count, options. Keeping the method name Read, in contrast to the Write method. This enables: * direct transfer of views under VV * zero copy It also eliminates the need for sentry to keep a slice of view because userspace had requested a read that is smaller than the view returned, removing the complexity there. Read/Peek/ReadPacket are now consolidated together and some duplicate code is removed. PiperOrigin-RevId: 350636322
2021-01-06Support add/remove IPv6 multicast group sock optGhanan Gowripalan
IPv4 was always supported but UDP never supported joining/leaving IPv6 multicast groups via socket options. Add: IPPROTO_IPV6, IPV6_JOIN_GROUP/IPV6_ADD_MEMBERSHIP Remove: IPPROTO_IPV6, IPV6_LEAVE_GROUP/IPV6_DROP_MEMBERSHIP Test: integration_test.TestUDPAddRemoveMembershipSocketOption PiperOrigin-RevId: 350396072
2021-01-05Fix panic when parsing SO_TIMESTAMP cmsgKevin Krakauer
PiperOrigin-RevId: 350223482
2020-12-22Move SO_BINDTODEVICE to socketops.Nayana Bidari
PiperOrigin-RevId: 348696094
2020-12-17[netstack] Implement IP(V6)_RECVERR socket option.Ayush Ranjan
PiperOrigin-RevId: 348055514
2020-12-17[netstack] Implement MSG_ERRQUEUE flag for recvmsg(2).Ayush Ranjan
Introduces the per-socket error queue and the necessary cmsg mechanisms. PiperOrigin-RevId: 348028508
2020-12-15[netstack] Make recvmsg(2) call to host in hostinet even if dst is empty.Ayush Ranjan
We want to make the recvmsg syscall to the host regardless of if the dst is empty or not so that: - Host can populate the control messages if necessary. - Host can return sender address. - Host can return appropriate errors. Earlier because we were using the IOSequence.CopyOutFrom() API, the usermem package does not even call the Reader function if the destination is empty (as an optimization). PiperOrigin-RevId: 347684566
2020-12-14[netstack] Update raw socket and hostinet control message parsing.Ayush Ranjan
There are surprisingly few syscall tests that run with hostinet. For example running the following command only returns two results: `bazel query test/syscalls:all | grep hostnet` I think as a result, as our control messages evolved, hostinet was left behind. Update it to support all control messages netstack supports. This change also updates sentry's control message parsing logic to make it up to date with all the control messages we support. PiperOrigin-RevId: 347508892
2020-12-14Move SO_LINGER option to socketops.Nayana Bidari
PiperOrigin-RevId: 347437786
2020-12-14Move SO_ERROR and SO_OOBINLINE option to socketops.Nayana Bidari
SO_OOBINLINE option is set/get as boolean value, which is the same as linux. As we currently do not support disabling this option, we always return it as true. PiperOrigin-RevId: 347413905
2020-12-11[netstack] Decouple tcpip.ControlMessages from the IP control messges.Ayush Ranjan
tcpip.ControlMessages can not contain Linux specific structures which makes it painful to convert back and forth from Linux to tcpip back to Linux when passing around control messages in hostinet and raw sockets. Now we convert to the Linux version of the control message as soon as we are out of tcpip. PiperOrigin-RevId: 347027065
2020-12-09Add support for IP_RECVORIGDSTADDR IP option.Bhasker Hariharan
Fixes #5004 PiperOrigin-RevId: 346643745
2020-12-07Export IGMP statsArthur Sfez
PiperOrigin-RevId: 346197760
2020-12-02Extract ICMPv4/v6 specific stats to their own typesArthur Sfez
This change lets us split the v4 stats from the v6 stats, which will be useful when adding stats for each network endpoint. PiperOrigin-RevId: 345322615
2020-12-02[netstack] Refactor common utils out of netstack to socket package.Ayush Ranjan
Moved AddressAndFamily() and ConvertAddress() to socket package from netstack. This helps because these utilities are used by sibling netstack packages. Such sibling dependencies can later cause circular dependencies. Common utils shared between siblings should be moved up to the parent. PiperOrigin-RevId: 345275571
2020-11-26[netstack] Add SOL_TCP options to SocketOptions.Ayush Ranjan
Ports the following options: - TCP_NODELAY - TCP_CORK - TCP_QUICKACK Also deletes the {Get/Set}SockOptBool interface methods from all implementations PiperOrigin-RevId: 344378824
2020-11-25[netstack] Add SOL_IP and SOL_IPV6 options to SocketOptions.Ayush Ranjan
We will use SocketOptions for all kinds of options, not just SOL_SOCKET options because (1) it is consistent with Linux which defines all option variables on the top level socket struct, (2) avoid code complexity. Appropriate checks have been added for matching option level to the endpoint type. Ported the following options to this new utility: - IP_MULTICAST_LOOP - IP_RECVTOS - IPV6_RECVTCLASS - IP_PKTINFO - IP_HDRINCL - IPV6_V6ONLY Changes in behavior (these are consistent with what Linux does AFAICT): - Now IP_MULTICAST_LOOP can be set for TCP (earlier it was a noop) but does not affect the endpoint itself. - We can now getsockopt IP_HDRINCL (earlier we would get an error). - Now we return ErrUnknownProtocolOption if SOL_IP or SOL_IPV6 options are used on unix sockets. - Now we return ErrUnknownProtocolOption if SOL_IPV6 options are used on non AF_INET6 endpoints. This change additionally makes the following modifications: - Add State() uint32 to commonEndpoint because both tcpip.Endpoint and transport.Endpoint interfaces have it. It proves to be quite useful. - Gets rid of SocketOptionsHandler.IsListening(). It was an anomaly as it was not a handler. It is now implemented on netstack itself. - Gets rid of tcp.endpoint.EndpointInfo and directly embeds stack.TransportEndpointInfo. There was an unnecessary level of embedding which served no purpose. - Removes some checks dual_stack_test.go that used the errors from GetSockOptBool(tcpip.V6OnlyOption) to confirm some state. This is not consistent with the new design and also seemed to be testing the implementation instead of behavior. PiperOrigin-RevId: 344354051
2020-11-18[netstack] Move SO_KEEPALIVE and SO_ACCEPTCONN option to SocketOptions.Ayush Ranjan
PiperOrigin-RevId: 343217712
2020-11-18[netstack] Move SO_REUSEPORT and SO_REUSEADDR option to SocketOptions.Ayush Ranjan
This changes also introduces: - `SocketOptionsHandler` interface which can be implemented by endpoints to handle endpoint specific behavior on SetSockOpt. This is analogous to what Linux does. - `DefaultSocketOptionsHandler` which is a default implementation of the above. This is embedded in all endpoints so that we don't have to uselessly implement empty functions. Endpoints with specific behavior can override the embedded method by manually defining its own implementation. PiperOrigin-RevId: 343158301
2020-11-18[netstack] Move SO_NO_CHECK option to SocketOptions.Ayush Ranjan
PiperOrigin-RevId: 343146856
2020-11-18[netstack] Move SO_PASSCRED option to SocketOptions.Ayush Ranjan
This change also makes the following fixes: - Make SocketOptions use atomic operations instead of having to acquire/drop locks upon each get/set option. - Make documentation more consistent. - Remove tcpip.SocketOptions from socketOpsCommon because it already exists in transport.Endpoint. - Refactors get/set socket options tests to be easily extendable. PiperOrigin-RevId: 343103780
2020-11-17Fix SO_ERROR behavior for TCP in gVisor.Bhasker Hariharan
Fixes the behaviour of SO_ERROR for tcp sockets where in linux it returns sk->sk_err and if sk->sk_err is 0 then it returns sk->sk_soft_err. In gVisor TCP we endpoint.HardError is the equivalent of sk->sk_err and endpoint.LastError holds soft errors. This change brings this into alignment with Linux such that both hard/soft errors are cleared when retrieved using getsockopt(.. SO_ERROR) is called on a socket. Fixes #3812 PiperOrigin-RevId: 342868552
2020-11-12Refactor SOL_SOCKET optionsNayana Bidari
Store all the socket level options in a struct and call {Get/Set}SockOpt on this struct. This will avoid implementing socket level options on all endpoints. This CL contains implementing one socket level option for tcp and udp endpoints. PiperOrigin-RevId: 342203981
2020-11-09Initialize references with a value of 1.Dean Deng
This lets us avoid treating a value of 0 as one reference. All references using the refsvfs2 template must call InitRefs() before the reference is incremented/decremented, or else a panic will occur. Therefore, it should be pretty easy to identify missing InitRef calls during testing. Updates #1486. PiperOrigin-RevId: 341411151
2020-11-01Fix returned error when deleting non-existant addressIan Lewis
PiperOrigin-RevId: 340149214
2020-10-29Make RedirectTarget thread safeKevin Krakauer
Fixes #4613. PiperOrigin-RevId: 339746784
2020-10-29Keep magic constants out of netstackKevin Krakauer
PiperOrigin-RevId: 339721152
2020-10-27Add basic address deletion to netlinkIan Lewis
Updates #3921 PiperOrigin-RevId: 339195417
2020-10-26Fix SCM Rights S/R reference leak.Dean Deng
Control messages collected when peeking into a socket were being leaked. PiperOrigin-RevId: 339114961
2020-10-23Fix nogo tests in //pkg/sentry/socket/...Ting-Yu Wang
PiperOrigin-RevId: 338784921
2020-10-23Support VFS2 save/restore.Jamie Liu
Inode number consistency checks are now skipped in save/restore tests for reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename. They pass in VFS1 due to the bug described in new test case SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs. Fixes #1663 PiperOrigin-RevId: 338776148
2020-10-23[vfs] kernfs: Implement remaining InodeAttr fields.Ayush Ranjan
Added the following fields in kernfs.InodeAttr: - blockSize - atime - mtime - ctime Also resolved all TODOs for #1193. Fixes #1193 PiperOrigin-RevId: 338714527
2020-10-23Support getsockopt for SO_ACCEPTCONN.Nayana Bidari
The SO_ACCEPTCONN option is used only on getsockopt(). When this option is specified, getsockopt() indicates whether socket listening is enabled for the socket. A value of zero indicates that socket listening is disabled; non-zero that it is enabled. PiperOrigin-RevId: 338703206
2020-10-23Rewrite reference leak checker without finalizers.Dean Deng
Our current reference leak checker uses finalizers to verify whether an object has reached zero references before it is garbage collected. There are multiple problems with this mechanism, so a rewrite is in order. With finalizers, there is no way to guarantee that a finalizer will run before the program exits. When an unreachable object with a finalizer is garbage collected, its finalizer will be added to a queue and run asynchronously. The best we can do is run garbage collection upon sandbox exit to make sure that all finalizers are enqueued. Furthermore, if there is a chain of finalized objects, e.g. A points to B points to C, garbage collection needs to run multiple times before all of the finalizers are enqueued. The first GC run will register the finalizer for A but not free it. It takes another GC run to free A, at which point B's finalizer can be registered. As a result, we need to run GC as many times as the length of the longest such chain to have a somewhat reliable leak checker. Finally, a cyclical chain of structs pointing to one another will never be garbage collected if a finalizer is set. This is a well-known issue with Go finalizers (https://github.com/golang/go/issues/7358). Using leak checking on filesystem objects that produce cycles will not work and even result in memory leaks. The new leak checker stores reference counted objects in a global map when leak check is enabled and removes them once they are destroyed. At sandbox exit, any remaining objects in the map are considered as leaked. This provides a deterministic way of detecting leaks without relying on the complexities of finalizers and garbage collection. This approach has several benefits over the former, including: - Always detects leaks of objects that should be destroyed very close to sandbox exit. The old checker very rarely detected these leaks, because it relied on garbage collection to be run in a short window of time. - Panics if we forgot to enable leak check on a ref-counted object (we will try to remove it from the map when it is destroyed, but it will never have been added). - Can store extra logging information in the map values without adding to the size of the ref count struct itself. With the size of just an int64, the ref count object remains compact, meaning frequent operations like IncRef/DecRef are more cache-efficient. - Can aggregate leak results in a single report after the sandbox exits. Instead of having warnings littered in the log, which were non-deterministically triggered by garbage collection, we can print all warning messages at once. Note that this could also be a limitation--the sandbox must exit properly for leaks to be detected. Some basic benchmarking indicates that this change does not significantly affect performance when leak checking is enabled, which is understandable since registering/unregistering is only done once for each filesystem object. Updates #1486. PiperOrigin-RevId: 338685972
2020-10-15sockets: ignore io.EOF from view.ReadAtAndrei Vagin
Reported-by: syzbot+5466463b7604c2902875@syzkaller.appspotmail.com PiperOrigin-RevId: 337451896
2020-10-14Fix SCM Rights reference leaks.Dean Deng
Control messages should be released on Read (which ignores the control message) or zero-byte Send. Otherwise, open fds sent through the control messages will be leaked. PiperOrigin-RevId: 337110774
2020-09-30ip6tables: redirect supportKevin Krakauer
Adds support for the IPv6-compatible redirect target. Redirection is a limited form of DNAT, where the destination is always the localhost. Updates #3549. PiperOrigin-RevId: 334698344
2020-09-30Make all Target.Action implementation pointer receiversKevin Krakauer
PiperOrigin-RevId: 334652998
2020-09-29iptables: remove unused min/max NAT range fieldsKevin Krakauer
PiperOrigin-RevId: 334531794
2020-09-29Don't allow broadcast/multicast source addressGhanan Gowripalan
As per relevant IP RFCS (see code comments), broadcast (for IPv4) and multicast addresses are not allowed. Currently checks for these are done at the transport layer, but since it is explicitly forbidden at the IP layers, check for them there. This change also removes the UDP.InvalidSourceAddress stat since there is no longer a need for it. Test: ip_test.TestSourceAddressValidation PiperOrigin-RevId: 334490971
2020-09-29iptables: refactor to make targets extendableKevin Krakauer
Like matchers, targets should use a module-like register/lookup system. This replaces the brittle switch statements we had before. The only behavior change is supporing IPT_GET_REVISION_TARGET. This makes it much easier to add IPv6 redirect in the next change. Updates #3549. PiperOrigin-RevId: 334469418
2020-09-29Merge pull request #3875 from btw616:fix/issue-3874gVisor bot
PiperOrigin-RevId: 334428344
2020-09-28Don't leak dentries returned by sockfs.NewDentry().Jamie Liu
PiperOrigin-RevId: 334263322
2020-09-24Add basic stateify annotations.Adin Scannell
Updates #1663 PiperOrigin-RevId: 333539293
2020-09-24Fix socket record leak in VFS2Tiwei Bie
VFS2 socket record is not removed from the system-wide socket table when the socket is released, which will lead to a memory leak. This patch fixes this issue. Fixes: #3874 Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
2020-09-20Merge pull request #3651 from ianlewis:ip-forwardinggVisor bot
PiperOrigin-RevId: 332760843
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 20:34:24 +0000