Age | Commit message (Collapse) | Author |
|
Current, doPoll copies the user struct pollfd array into a
[]syscalls.PollFD, which contains internal kdefs.FD and
waiter.EventMask types. While these are currently binary-compatible with
the Linux versions, we generally discourage copying directly to internal
types (someone may inadvertantly change kdefs.FD to uint64).
Instead, copy directly to a []linux.PollFD, which will certainly be
binary compatible. Most of syscalls/polling.go is included directly into
syscalls/linux/sys_poll.go, as it can then operate directly on
linux.PollFD. The additional syscalls.PollFD type is providing little
value.
I've also added explicit conversion functions for waiter.EventMask,
which creates the possibility of a different binary format.
PiperOrigin-RevId: 244042947
Change-Id: I24e5b642002a32b3afb95a9dcb80d4acd1288abf
|
|
PiperOrigin-RevId: 243018347
Change-Id: I1e5b80607c1df0747482abea61db7fcf24536d37
|
|
PiperOrigin-RevId: 242704699
Change-Id: I87db368ca343b3b4bf4f969b17d3aa4ce2f8bd4f
|
|
PiperOrigin-RevId: 240848882
Change-Id: I23dd4599f073263437aeab357c3f767e1a432b82
|
|
Track new sockets created during accept(2) in the socket table for all
families. Previously we were only doing this for unix domain sockets.
PiperOrigin-RevId: 239475550
Change-Id: I16f009f24a06245bfd1d72ffd2175200f837c6ac
|
|
PiperOrigin-RevId: 239221041
Change-Id: Icc19e32a00fa89167447ab2f45e90dcfd61bea04
|
|
getsockopt(IP_MULTICAST_IF) only supports struct in_addr.
Also adds support for setsockopt(IP_MULTICAST_IF) with struct in_addr.
PiperOrigin-RevId: 237620230
Change-Id: I75e7b5b3e08972164eb1906f43ddd67aedffc27c
|
|
This is the correct Linux behavior, and at least PHP depends on it.
PiperOrigin-RevId: 237565639
Change-Id: I931af09c8ed99a842cf70d22bfe0b65e330c4137
|
|
IP_MULTICAST_LOOP controls whether or not multicast packets sent on the default
route are looped back. In order to implement this switch, support for sending
and looping back multicast packets on the default route had to be implemented.
For now we only support IPv4 multicast.
PiperOrigin-RevId: 237534603
Change-Id: I490ac7ff8e8ebef417c7eb049a919c29d156ac1c
|
|
PiperOrigin-RevId: 236945145
Change-Id: I051760d95154ea5574c8bb6aea526f488af5e07b
|
|
PiperOrigin-RevId: 236926132
Change-Id: I5cf103f22766e6e65a581de780c7bb9ca0fa3181
|
|
Broadly, this change:
* Enables sockets to be created via `socket(AF_INET, SOCK_RAW, IPPROTO_ICMP)`.
* Passes the network-layer (IP) header up the stack to the transport endpoint,
which can pass it up to the socket layer. This allows a raw socket to return
the entire IP packet to users.
* Adds functions to stack.TransportProtocol, stack.Stack, stack.transportDemuxer
that enable incoming packets to be delivered to raw endpoints. New raw sockets
of other protocols (not ICMP) just need to register with the stack.
* Enables ping.endpoint to return IP headers when created via SOCK_RAW.
PiperOrigin-RevId: 235993280
Change-Id: I60ed994f5ff18b2cbd79f063a7fdf15d093d845a
|
|
PiperOrigin-RevId: 235818534
Change-Id: I99f7e3fd1dc808b35f7a08b96b7c3226603ab808
|
|
This change adds support for the SO_BROADCAST socket option in gVisor Netstack.
This support includes getsockopt()/setsockopt() functionality for both UDP and
TCP endpoints (the latter being a NOOP), dispatching broadcast messages up and
down the stack, and route finding/creation for broadcast packets. Finally, a
suite of tests have been implemented, exercising this functionality through the
Linux syscall API.
PiperOrigin-RevId: 234850781
Change-Id: If3e666666917d39f55083741c78314a06defb26c
|
|
Ping sometimes uses this instead of SO_TIMESTAMP.
PiperOrigin-RevId: 234699590
Change-Id: Ibec9c34fa0d443a931557a2b1b1ecd83effe7765
|
|
This allows setting a default send interface for IPv4 multicast. IPv6 support
will come later.
PiperOrigin-RevId: 234251379
Change-Id: I65922341cd8b8880f690fae3eeb7ddfa47c8c173
|
|
SO_TIMESTAMP is reimplemented in ping and UDP sockets (and needs to be added for
TCP), but can just be implemented in epsocket for simplicity. This will also
make SIOCGSTAMP easier to implement.
PiperOrigin-RevId: 234179300
Change-Id: Ib5ea0b1261dc218c1a8b15a65775de0050fe3230
|
|
PiperOrigin-RevId: 234147487
Change-Id: I779a6012832bb94a6b89f5bcc7d821b40ae969cc
|
|
Also includes a few fixes for IPv4 multicast support. IPv6 support is coming in
a followup CL.
PiperOrigin-RevId: 233008638
Change-Id: If7dae6222fef43fda48033f0292af77832d95e82
|
|
PiperOrigin-RevId: 232948478
Change-Id: Ib830121e5e79afaf5d38d17aeef5a1ef97913d23
|
|
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
|
|
More helper structs have been added to the fsutil package to make it easier to
implement fs.InodeOperations and fs.FileOperations.
PiperOrigin-RevId: 229305982
Change-Id: Ib6f8d3862f4216745116857913dbfa351530223b
|
|
This option allows multiple sockets to be bound to the same port.
Incoming packets are distributed to sockets using a hash based on source and
destination addresses. This means that all packets from one sender will be
received by the same server socket.
PiperOrigin-RevId: 227153413
Change-Id: I59b6edda9c2209d5b8968671e9129adb675920cf
|
|
PiperOrigin-RevId: 226993086
Change-Id: I71757f231436538081d494da32ca69f709bc71c7
|
|
We don't explicitly support out-of-band data and treat it like normal in-band
data. This is equilivent to SO_OOBINLINE being enabled, so always report that
it is enabled.
PiperOrigin-RevId: 226572742
Change-Id: I4c30ccb83265e76c30dea631cbf86822e6ee1c1b
|
|
Within gVisor, plumb new socket options to netstack.
Within netstack, fix GetSockOpt and SetSockOpt return value logic.
PiperOrigin-RevId: 226532229
Change-Id: If40734e119eed633335f40b4c26facbebc791c74
|
|
Connectionless Unix sockets (DGRAM Unix sockets created with the socket system
call) inherently only have a read queue. They do not establish bidirectional
connections, instead, the connect system call only sets a default send
location. Writes give the data to the other endpoint which has its own read
queue.
To simplify the code, connectionless Unix sockets still get read and write
queues, but the write queue is a dummy and never waited on. The read queue is
the connectionless endpoint's queue. This change fixes a bug where the dummy
queue was incorrectly set as the read queue and the endpoint's queue was
incorrectly set as the write queue. This meant that read notifications went
to the dummy queue and were black holed.
PiperOrigin-RevId: 225921042
Change-Id: I8d9059def787a2c3c305185b92d05093fbd2be2a
|
|
PiperOrigin-RevId: 225632398
Change-Id: I909e7e2925aa369adc28e844c284d9a6108e85ce
|
|
PiperOrigin-RevId: 225620490
Change-Id: Ia726107b3f58093a5f881634f90b071b32d2c269
|
|
PiperOrigin-RevId: 225424296
Change-Id: I60fcc2b859339dca9963cb32227a287e719ab765
|
|
MSG_WAITALL requests that recv family calls do not perform short reads. It only
has an effect for SOCK_STREAM sockets, other types ignore it.
PiperOrigin-RevId: 224918540
Change-Id: Id97fbf972f1f7cbd4e08eec0138f8cbdf1c94fe7
|
|
PiperOrigin-RevId: 224696233
Change-Id: I45c425d9e32adee5dcce29ca7439a06567b26014
|
|
* Clarify tcpip.Endpoint.Write contract regarding short writes.
* Enforce tcpip.Endpoint.Write contract regarding short writes.
* Update relevant users of tcpip.Endpoint.Write.
PiperOrigin-RevId: 224377586
Change-Id: I24299ecce902eb11317ee13dae3b8d8a7c5b097d
|
|
FileOperations.Write should return ErrWouldBlock to allow the upper
layer to loop and sendmsg should continue writing where it left off
on a partial write.
PiperOrigin-RevId: 224081631
Change-Id: Ic61f6943ea6b7abbd82e4279decea215347eac48
|
|
The number of symbolic links that are allowed to be followed
are for a full path and not just a chain of symbolic links.
PiperOrigin-RevId: 224047321
Change-Id: I5e3c4caf66a93c17eeddcc7f046d1e8bb9434a40
|
|
Untyped integer constants default to type int and the binary package will panic
if one tries to encode an int.
PiperOrigin-RevId: 223890001
Change-Id: Iccc3afd6d74bad24c35d764508e450fd317b76ec
|
|
With rpcinet if shutdown flags are not saved before making
the rpc a race is possible where blocked threads are woken
up before the flags have been persisted. This would mean
that threads can block indefinitely in a recvmsg after a
shutdown(SHUT_RD) has happened.
PiperOrigin-RevId: 223089783
Change-Id: If595e7add12aece54bcdf668ab64c570910d061a
|
|
PiperOrigin-RevId: 222148953
Change-Id: I21500a9f08939c45314a6414e0824490a973e5aa
|
|
Previously, TCP_NODELAY was always enabled and we would lie about it being
configurable. TCP_NODELAY is now disabled by default (to match Linux) in the
socket layer so that non-gVisor users don't automatically start using this
questionable optimization.
PiperOrigin-RevId: 221368472
Change-Id: Ib0240f66d94455081f4e0ca94f09d9338b2c1356
|
|
Previously this code used the tcpip error space. Since it is no longer part of
netstack, it can use the sentry's error space (except for a few cases where
there is still some shared code. This reduces the number of error space
conversions required for hot Unix socket operations.
PiperOrigin-RevId: 218541611
Change-Id: I3d13047006a8245b5dfda73364d37b8a453784bb
|
|
This change also adds extensive testing to the p9 package via mocks. The sanity
checks and type checks are moved from the gofer into the core package, where
they can be more easily validated.
PiperOrigin-RevId: 218296768
Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
|
|
This allows us to release messages in the queue when all users close.
PiperOrigin-RevId: 218033550
Change-Id: I2f6e87650fced87a3977e3b74c64775c7b885c1b
|
|
Added events for *ctl syscalls that may have multiple different commands.
For runsc, each syscall event is only logged once. For *ctl syscalls, use
the cmd as identifier, not only the syscall number.
PiperOrigin-RevId: 218015941
Change-Id: Ie3c19131ae36124861e9b492a7dbe1765d9e5e59
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
This should improve performance.
PiperOrigin-RevId: 217610560
Change-Id: I370f196ea2396f1715a460b168ecbee197f94d6c
|
|
This queue only has a single user, so there is no need for it to use an
interface. Merging it into the same package as its sole user allows us to avoid
a circular dependency.
This simplifies the code and should slightly improve performance.
PiperOrigin-RevId: 217595889
Change-Id: Iabbd5164240b935f79933618c61581bc8dcd2822
|
|
PiperOrigin-RevId: 217557656
Change-Id: I63d27635b1a6c12877279995d2d9847b6a19da9b
|
|
This enables ifconfig to display MTU.
PiperOrigin-RevId: 216917021
Change-Id: Id513b23d9d76899bcb71b0b6a25036f41629a923
|
|
Currently, in the face of FileMem fragmentation and a large sendmsg or
recvmsg call, host sockets may pass > 1024 iovecs to the host, which
will immediately cause the host to return EMSGSIZE.
When we detect this case, use a single intermediate buffer to pass to
the kernel, copying to/from the src/dst buffer.
To avoid creating unbounded intermediate buffers, enforce message size
checks and truncation w.r.t. the send buffer size. The same
functionality is added to netstack unix sockets for feature parity.
PiperOrigin-RevId: 216590198
Change-Id: I719a32e71c7b1098d5097f35e6daf7dd5190eff7
|
|
PiperOrigin-RevId: 216431260
Change-Id: Ia6e5c8d506940148d10ff2884cf4440f470e5820
|