summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/socket
AgeCommit message (Collapse)Author
2020-04-28Deduplicate unix socket Release() method.Dean Deng
PiperOrigin-RevId: 308932254
2020-04-28Support pipes and sockets in VFS2 gofer fs.Dean Deng
Named pipes and sockets can be represented in two ways in gofer fs: 1. As a file on the remote filesystem. In this case, all file operations are passed through 9p. 2. As a synthetic file that is internal to the sandbox. In this case, the dentry stores an endpoint or VFSPipe for sockets and pipes respectively, which replaces interactions with the remote fs through the gofer. In gofer.filesystem.MknodAt, we attempt to call mknod(2) through 9p, and if it fails, fall back to the synthetic version. Updates #1200. PiperOrigin-RevId: 308828161
2020-04-27Import host sockets.Dean Deng
The FileDescription implementation for hostfs sockets uses the standard Unix socket implementation (unix.SocketVFS2), but is also tied to a hostfs dentry. Updates #1672, #1476 PiperOrigin-RevId: 308716426
2020-04-27Automated rollback of changelist 308163542gVisor bot
PiperOrigin-RevId: 308674219
2020-04-24Port SCM Rights to VFS2.Dean Deng
Fixes #1477. PiperOrigin-RevId: 308317511
2020-04-23Remove View.First() and View.RemoveFirst()Kevin Krakauer
These methods let users eaily break the VectorisedView abstraction, and allowed netstack to slip into pseudo-enforcement of the "all headers are in the first View" invariant. Removing them and replacing with PullUp(n) breaks this reliance and will make it easier to add iptables support and rework network buffer management. The new View.PullUp(n) method is low cost in the common case, when when all the headers fit in the first View. PiperOrigin-RevId: 308163542
2020-04-21Sentry metrics updates.Dave Bailey
Sentry metrics with nanoseconds units are labeled as such, and non-cumulative sentry metrics are supported. PiperOrigin-RevId: 307621080
2020-04-21Automated rollback of changelist 307477185gVisor bot
PiperOrigin-RevId: 307598974
2020-04-17Remove View.First() and View.RemoveFirst()Kevin Krakauer
These methods let users eaily break the VectorisedView abstraction, and allowed netstack to slip into pseudo-enforcement of the "all headers are in the first View" invariant. Removing them and replacing with PullUp(n) breaks this reliance and will make it easier to add iptables support and rework network buffer management. The new View.PullUp(n) method is low cost in the common case, when when all the headers fit in the first View.
2020-04-17Permit setting unknown optionsTamir Duberstein
This previously changed in 305699233, but this behaviour turned out to be load bearing. PiperOrigin-RevId: 307033802
2020-04-09Replace type assertion with TaskFromContext.Ting-Yu Wang
This should fix panic at aio callback. PiperOrigin-RevId: 305798549
2020-04-09Convert int and bool socket options to use GetSockOptInt and GetSockOptBoolAndrei Vagin
PiperOrigin-RevId: 305699233
2020-04-07Remove out-of-date TODOs.Ting-Yu Wang
We already have network namespace for netstack. PiperOrigin-RevId: 305341954
2020-04-04Record VFS2 sockets in global socket map.Dean Deng
Updates #1476, #1478, #1484, #1485. PiperOrigin-RevId: 304845354
2020-04-03Add FileDescriptionImpl for Unix sockets.Dean Deng
This change involves several steps: - Refactor the VFS1 unix socket implementation to share methods between VFS1 and VFS2 where possible. Re-implement the rest. - Override the default PRead, Read, PWrite, Write, Ioctl, Release methods in FileDescriptionDefaultImpl. - Add functions to create and initialize a new Dentry/Inode and FileDescription for a Unix socket file. Updates #1476 PiperOrigin-RevId: 304689796
2020-04-02Fix typo in TODO comments.Dean Deng
PiperOrigin-RevId: 304508083
2020-04-01Add FileDescription interface for socket files.Dean Deng
Refactor the existing socket interface to share methods between VFS1 and VFS2. The method signatures do not contain anything filesystem-related, so they don't need to be re-defined for VFS2. Updates #1476, #1478, #1484, #1485. PiperOrigin-RevId: 304184545
2020-03-26Support owner matching for iptables.Nayana Bidari
This feature will match UID and GID of the packet creator, for locally generated packets. This match is only valid in the OUTPUT and POSTROUTING chains. Forwarded packets do not have any socket associated with them. Packets from kernel threads do have a socket, but usually no owner.
2020-03-25Automated rollback of changelist 301837227Bhasker Hariharan
PiperOrigin-RevId: 302891559
2020-03-24Move tcpip.PacketBuffer and IPTables to stack package.Bhasker Hariharan
This is a precursor to be being able to build an intrusive list of PacketBuffers for use in queuing disciplines being implemented. Updates #2214 PiperOrigin-RevId: 302677662
2020-03-23Support basic /proc/net/dev metrics for netstackIan Lewis
Fixes #506 PiperOrigin-RevId: 302540404
2020-03-23Fix data race in SetSockOpt.Bhasker Hariharan
PiperOrigin-RevId: 302539171
2020-03-19Change SocketOperations.readMu to an RWMutex.Bhasker Hariharan
Also get rid of the readViewHasData as it's not required anymore. Updates #231, #357 PiperOrigin-RevId: 301837227
2020-03-19Remove workMu from tcpip.Endpoint.Bhasker Hariharan
workMu is removed and e.mu is now a mutex that supports TryLock. The packet processing path tries to lock the mutex and if its locked it will just queue the packet and move on. The endpoint.UnlockUser() will process any backlog of packets before unlocking the socket. This simplifies the locking inside tcp endpoints a lot. Further the endpoint.LockUser() implements spinning as long as the lock is not held by another syscall goroutine. This ensures low latency as not spinning leads to the task thread being put to sleep if the lock is held by the packet dispatch path. This is suboptimal as the lower layer rarely holds the lock for long so implementing spinning here helps. If the lock is held by another task goroutine then we just proceed to call LockUser() and the task could be put to sleep. The protocol goroutines themselves just call e.mu.Lock() and block if the lock is currently not available. Updates #231, #357 PiperOrigin-RevId: 301808349
2020-03-16Merge pull request #1943 from kevinGC:ipt-filter-ipgVisor bot
PiperOrigin-RevId: 301197007
2020-03-11Merge pull request #1975 from nybidari:iptablesgVisor bot
PiperOrigin-RevId: 300362789
2020-03-02Fix panic caused by invalid address for Bind in packet sockets.Nayana Bidari
PiperOrigin-RevId: 298476533
2020-03-02socket: take readMu to access readViewAndrei Vagin
DATA RACE in netstack.(*SocketOperations).fetchReadView Write at 0x00c001dca138 by goroutine 1001: gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).fetchReadView() pkg/sentry/socket/netstack/netstack.go:418 +0x85 gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).coalescingRead() pkg/sentry/socket/netstack/netstack.go:2309 +0x67 gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).nonBlockingRead() pkg/sentry/socket/netstack/netstack.go:2378 +0x183d Previous read at 0x00c001dca138 by goroutine 1111: gvisor.dev/gvisor/pkg/sentry/socket/netstack.(*SocketOperations).Ioctl() pkg/sentry/socket/netstack/netstack.go:2666 +0x533 gvisor.dev/gvisor/pkg/sentry/syscalls/linux.Ioctl() Reported-by: syzbot+d4c3885fcc346f08deb6@syzkaller.appspotmail.com PiperOrigin-RevId: 298387377
2020-02-28Add nat table support for iptables.Nayana Bidari
- Fix review comments.
2020-02-27Internal change.Nayana Bidari
PiperOrigin-RevId: 297638665
2020-02-26iptables: filter by IP address (and range)Kevin Krakauer
Enables commands such as: $ iptables -A INPUT -d 127.0.0.1 -j ACCEPT $ iptables -t nat -A PREROUTING ! -d 127.0.0.1 -j REDIRECT Also adds a bunch of REDIRECT+destination tests.
2020-02-25Merge branch 'master' into iptablesnybidari
2020-02-25Add nat table support for iptables.Nayana Bidari
- commit the changes for the comments.
2020-02-19Internal change.gVisor bot
PiperOrigin-RevId: 296088213
2020-02-18Enable IPV6_RECVTCLASS socket option for datagram socketsgVisor bot
Added the ability to get/set the IP_RECVTCLASS socket option on UDP endpoints. If enabled, traffic class from the incoming Network Header passed as ancillary data in the ControlMessages. Adding Get/SetSockOptBool to decrease the overhead of getting/setting simple options. (This was absorbed in a CL that will be landing before this one). Test: * Added unit test to udp_test.go that tests getting/setting as well as verifying that we receive expected TOS from incoming packet. * Added a syscall test for verifying getting/setting * Removed test skip for existing syscall test to enable end to end test. PiperOrigin-RevId: 295840218
2020-02-18Merge pull request #1850 from kevinGC:jump2gVisor bot
PiperOrigin-RevId: 295785052
2020-02-18Add nat table support for iptables.Nayana Bidari
Add nat table support for Prerouting hook with Redirect option. Add tests to check redirect of ports.
2020-02-13We can now create and jump in iptables. For example:Kevin Krakauer
$ iptables -N foochain $ iptables -A INPUT -j foochain
2020-02-13Merge pull request #1791 from kevinGC:uchainsgVisor bot
PiperOrigin-RevId: 294957297
2020-02-13Internal change.gVisor bot
PiperOrigin-RevId: 294952610
2020-02-12iptables: User chainsKevin Krakauer
- Adds creation of user chains via `-N <chainname>` - Adds `-j RETURN` support for built-in chains, which triggers the chain's underflow rule (usually the default policy). - Adds tests for chain creation, default policies, and `-j RETURN' from built-in chains.
2020-02-11Move Align{Up,Down} into binary package.gVisor bot
PiperOrigin-RevId: 294477647
2020-02-10Merge pull request #1775 from kevinGC:tcp-matchers-submitgVisor bot
PiperOrigin-RevId: 294340468
2020-02-07Address GH comments.Kevin Krakauer
2020-02-06Merge branch 'master' into tcp-matchers-submitKevin Krakauer
2020-02-05Add notes to relevant tests.Adin Scannell
These were out-of-band notes that can help provide additional context and simplify automated imports. PiperOrigin-RevId: 293525915
2020-02-05recv() on a closed TCP socket returns ENOTCONNEyal Soha
From RFC 793 s3.9 p58 Event Processing: If RECEIVE Call arrives in CLOSED state and the user has access to such a connection, the return should be "error: connection does not exist" Fixes #1598 PiperOrigin-RevId: 293494287
2020-02-05Merge branch 'master' into tcp-matchers-submitKevin Krakauer
2020-02-04Support RTM_NEWADDR and RTM_GETLINK in (rt)netlink.Ting-Yu Wang
PiperOrigin-RevId: 293271055
2020-02-04Merge pull request #1683 from kevinGC:ipt-udp-matchersgVisor bot
PiperOrigin-RevId: 293243342
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 05:50:15 +0000