Age | Commit message (Collapse) | Author |
|
The current SNAT implementation has several limitations:
- SNAT source port has to be specified. It is not optional.
- SNAT source port range is not supported.
- SNAT for UDP is a one-way translation. No response packets
are handled (because conntrack doesn't support UDP currently).
- SNAT and REDIRECT can't work on the same connection.
Fixes #5489
PiperOrigin-RevId: 367750325
|
|
Split usermem package to help remove syserror dependency in go_marshal.
New hostarch package contains code not dependent on syserror.
PiperOrigin-RevId: 365651233
|
|
On Linux these are meant to be equivalent to POLLIN/POLLOUT. Rather
than hack these on in sys_poll etc it felt cleaner to just cleanup
the call sites to notify for both events. This is what linux does
as well.
Fixes #5544
PiperOrigin-RevId: 364859977
|
|
Doing so involved breaking dependencies between //pkg/tcpip and the rest
of gVisor, which are discouraged anyways.
Tested on the Go branch via:
gvisor.dev/gvisor/pkg/tcpip/...
Addresses #1446.
PiperOrigin-RevId: 363081778
|
|
PiperOrigin-RevId: 362999220
|
|
Speeds up the socket stress tests by a couple orders of magnitude.
PiperOrigin-RevId: 361721050
|
|
transport.baseEndpoint.receiver and transport.baseEndpoint.connected are
protected by transport.baseEndpoint.Mutex. In order to access them without
holding the mutex, we must make a copy.
Notifications must be sent without holding the mutex, so we need the values
without holding the mutex.
|
|
While I'm here, simplify the comments and unify naming of certain stats
across protocols.
PiperOrigin-RevId: 360728849
|
|
The syscall package has been deprecated in favor of golang.org/x/sys.
Note that syscall is still used in the following places:
- pkg/sentry/socket/hostinet/stack.go: some netlink related functionalities
are not yet available in golang.org/x/sys.
- syscall.Stat_t is still used in some places because os.FileInfo.Sys() still
returns it and not unix.Stat_t.
Updates #214
PiperOrigin-RevId: 360701387
|
|
This removes a three-lock deadlock between fdnotifier.notifier.mu,
epoll.EventPoll.listsMu, and baseEndpoint.mu.
A lock order comment was added to epoll/epoll.go.
Also fix unsafe access of baseEndpoint.connected/receiver.
PiperOrigin-RevId: 358515191
|
|
Also skips a test if the setsockopt to increase send buffer did not result in an
increase. This is possible when the underlying socket is a host backed unix
domain socket as in such cases gVisor does not permit increasing SO_SNDBUF.
PiperOrigin-RevId: 358285158
|
|
This change also adds support for Router Alert option processing on
incoming packets, a new stat for Router Alert option, and exports
all the IP-option related stats.
Fixes #5491
PiperOrigin-RevId: 358238123
|
|
PiperOrigin-RevId: 358078157
|
|
This change implements TLP details enumerated in
https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5.3
Fixes #5085
PiperOrigin-RevId: 357125037
|
|
The limits for snd/rcv buffers for unix domain socket is controlled by the
following sysctls on linux
- net.core.rmem_default
- net.core.rmem_max
- net.core.wmem_default
- net.core.wmem_max
Today in gVisor we do not expose these sysctls but we do support setting the
equivalent in netstack via stack.Options() method. But AF_UNIX sockets in gVisor
can be used without netstack, with hostinet or even without any networking stack
at all. Which means ideally these sysctls need to live as globals in gVisor.
But rather than make this a big change for now we hardcode the limits in the
AF_UNIX implementation itself (which in itself is better than where we were
before) where it SO_SNDBUF was hardcoded to 16KiB. Further we bump the initial
limit to a default value of 208 KiB to match linux from the paltry 16 KiB we use
today.
Updates #5132
PiperOrigin-RevId: 356665498
|
|
Panic seen at some code path like control.ExecAsync where
ctx does not have a Task.
Reported-by: syzbot+55ce727161cf94a7b7d6@syzkaller.appspotmail.com
PiperOrigin-RevId: 355960596
|
|
...to remove the need for the transport layer to deduce the type of
error it received.
Rename HandleControlPacket to HandleError as HandleControlPacket only
handles errors.
tcpip.SockError now holds a tcpip.SockErrorCause interface that
different errors can implement.
PiperOrigin-RevId: 354994306
|
|
This makes it possible to add data to types that implement tcpip.Error.
ErrBadLinkEndpoint is removed as it is unused.
PiperOrigin-RevId: 354437314
|
|
This was removed in 6c0e1d9cfe6adbfbb32e7020d6426608ac63ad37 but turns
out to be crucial to prevent flaky behaviour in sendfile.
PiperOrigin-RevId: 354434144
|
|
This CL adds support for the following fields:
- RTT, RTTVar, RTO
- send congestion window (sndCwnd) and send slow start threshold (sndSsthresh)
- congestion control state(CaState)
- ReorderSeen
PiperOrigin-RevId: 354195361
|
|
- This CL will initialize the function handler used for getting the send
buffer size limits during endpoint creation and does not require the caller of
SetSendBufferSize(..) to know the endpoint type(tcp/udp/..)
PiperOrigin-RevId: 353992634
|
|
If data is sent over a stream socket that will not fit all at once, it will
be sent over multiple packets. SCM Rights should only be sent with the first
packet (see net/unix/af_unix.c:unix_stream_sendmsg in Linux).
Reported-by: syzbot+aa26482e9c4887aff259@syzkaller.appspotmail.com
PiperOrigin-RevId: 353886442
|
|
This CL moves {S,G}etsockopt of SO_SNDBUF from all endpoints to socketops. For
unix sockets, we do not support setting of this option.
PiperOrigin-RevId: 353871484
|
|
The ARP stat NetworkUnreachable was removed, and was replaced by
InterfaceHasNoLocalAddress. No stats are recorded when dealing with an
missing endpoint (ErrNotConnected) (because if there is no endpoint,
there is no valid per-endpoint stats).
PiperOrigin-RevId: 353759462
|
|
Fixes #1509.
PiperOrigin-RevId: 353295589
|
|
We have support for the output interface name, but not for the input
interface name.
This change adds the support for the input interface name, and adds the
test cases for it.
Fixes #5300
PiperOrigin-RevId: 353179389
|
|
- Removes the unimplemented message for SO_LINGER
- Fix the length for IP_PKTINFO option
PiperOrigin-RevId: 352917611
|
|
PiperOrigin-RevId: 352904728
|
|
The same intent can be specified via the io.Writer.
PiperOrigin-RevId: 352098747
|
|
Fixes #4963
Startblock:
has LGTM from sbalana
and then
add reviewer ghanan
PiperOrigin-RevId: 351886320
|
|
Link address resolution is performed at the link layer (if required) so
we can defer it from the transport layer. When link resolution is
required, packets will be queued and sent once link resolution
completes. If link resolution fails, the transport layer will receive a
control message indicating that the stack failed to route the packet.
tcpip.Endpoint.Write no longer returns a channel now that writes do not
wait for link resolution at the transport layer.
tcpip.ErrNoLinkAddress is no longer used so it is removed.
Removed calls to stack.Route.ResolveWith from the transport layer so
that link resolution is performed when a route is created in response
to an incoming packet (e.g. to complete TCP handshakes or send a RST).
Tests:
- integration_test.TestForwarding
- integration_test.TestTCPLinkResolutionFailure
Fixes #4458
RELNOTES: n/a
PiperOrigin-RevId: 351684158
|
|
Simplify some logic while I'm here.
PiperOrigin-RevId: 351491593
|
|
These are primarily simplification and lint mistakes. However, minor
fixes are also included and tests added where appropriate.
PiperOrigin-RevId: 351425971
|
|
Read now takes a destination io.Writer, count, options. Keeping the method name
Read, in contrast to the Write method.
This enables:
* direct transfer of views under VV
* zero copy
It also eliminates the need for sentry to keep a slice of view because
userspace had requested a read that is smaller than the view returned, removing
the complexity there.
Read/Peek/ReadPacket are now consolidated together and some duplicate code is
removed.
PiperOrigin-RevId: 350636322
|
|
IPv4 was always supported but UDP never supported joining/leaving IPv6
multicast groups via socket options.
Add: IPPROTO_IPV6, IPV6_JOIN_GROUP/IPV6_ADD_MEMBERSHIP
Remove: IPPROTO_IPV6, IPV6_LEAVE_GROUP/IPV6_DROP_MEMBERSHIP
Test: integration_test.TestUDPAddRemoveMembershipSocketOption
PiperOrigin-RevId: 350396072
|
|
PiperOrigin-RevId: 350223482
|
|
PiperOrigin-RevId: 348696094
|
|
PiperOrigin-RevId: 348055514
|
|
Introduces the per-socket error queue and the necessary cmsg mechanisms.
PiperOrigin-RevId: 348028508
|
|
We want to make the recvmsg syscall to the host regardless of if the dst is
empty or not so that:
- Host can populate the control messages if necessary.
- Host can return sender address.
- Host can return appropriate errors.
Earlier because we were using the IOSequence.CopyOutFrom() API, the usermem
package does not even call the Reader function if the destination is empty (as
an optimization).
PiperOrigin-RevId: 347684566
|
|
There are surprisingly few syscall tests that run with hostinet. For example
running the following command only returns two results:
`bazel query test/syscalls:all | grep hostnet`
I think as a result, as our control messages evolved, hostinet was left
behind. Update it to support all control messages netstack supports.
This change also updates sentry's control message parsing logic to make it up to
date with all the control messages we support.
PiperOrigin-RevId: 347508892
|
|
PiperOrigin-RevId: 347437786
|
|
SO_OOBINLINE option is set/get as boolean value, which is the same as linux.
As we currently do not support disabling this option, we always return it as
true.
PiperOrigin-RevId: 347413905
|
|
tcpip.ControlMessages can not contain Linux specific structures which makes it
painful to convert back and forth from Linux to tcpip back to Linux when passing
around control messages in hostinet and raw sockets.
Now we convert to the Linux version of the control message as soon as we are
out of tcpip.
PiperOrigin-RevId: 347027065
|
|
Fixes #5004
PiperOrigin-RevId: 346643745
|
|
PiperOrigin-RevId: 346197760
|
|
This change lets us split the v4 stats from the v6 stats, which will be
useful when adding stats for each network endpoint.
PiperOrigin-RevId: 345322615
|
|
Moved AddressAndFamily() and ConvertAddress() to socket package from netstack.
This helps because these utilities are used by sibling netstack packages.
Such sibling dependencies can later cause circular dependencies. Common utils
shared between siblings should be moved up to the parent.
PiperOrigin-RevId: 345275571
|
|
Ports the following options:
- TCP_NODELAY
- TCP_CORK
- TCP_QUICKACK
Also deletes the {Get/Set}SockOptBool interface methods from all implementations
PiperOrigin-RevId: 344378824
|
|
We will use SocketOptions for all kinds of options, not just SOL_SOCKET options
because (1) it is consistent with Linux which defines all option variables on
the top level socket struct, (2) avoid code complexity. Appropriate checks
have been added for matching option level to the endpoint type.
Ported the following options to this new utility:
- IP_MULTICAST_LOOP
- IP_RECVTOS
- IPV6_RECVTCLASS
- IP_PKTINFO
- IP_HDRINCL
- IPV6_V6ONLY
Changes in behavior (these are consistent with what Linux does AFAICT):
- Now IP_MULTICAST_LOOP can be set for TCP (earlier it was a noop) but does not
affect the endpoint itself.
- We can now getsockopt IP_HDRINCL (earlier we would get an error).
- Now we return ErrUnknownProtocolOption if SOL_IP or SOL_IPV6 options are used
on unix sockets.
- Now we return ErrUnknownProtocolOption if SOL_IPV6 options are used on non
AF_INET6 endpoints.
This change additionally makes the following modifications:
- Add State() uint32 to commonEndpoint because both tcpip.Endpoint and
transport.Endpoint interfaces have it. It proves to be quite useful.
- Gets rid of SocketOptionsHandler.IsListening(). It was an anomaly as it was
not a handler. It is now implemented on netstack itself.
- Gets rid of tcp.endpoint.EndpointInfo and directly embeds
stack.TransportEndpointInfo. There was an unnecessary level of embedding
which served no purpose.
- Removes some checks dual_stack_test.go that used the errors from
GetSockOptBool(tcpip.V6OnlyOption) to confirm some state. This is not
consistent with the new design and also seemed to be testing the
implementation instead of behavior.
PiperOrigin-RevId: 344354051
|