Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 375740504
|
|
This change also includes miscellaneous improvements:
* UnknownProtocolRcvdPackets has been separated into two stats, to
specify at which layer the unknown protocol was found (L3 or L4)
* MalformedRcvdPacket is not aggregated across every endpoint anymore.
Doing it this way did not add useful information, and it was also error-prone
(example: ipv6 forgot to increment this aggregated stat, it only
incremented its own ipv6.MalformedPacketsReceived). It is now only incremented
the NIC.
* Removed TestStatsString test which was outdated and had no real
utility.
PiperOrigin-RevId: 375057472
|
|
PiperOrigin-RevId: 375051638
|
|
Add missing protocol state to TCPINFO struct and update packetimpact.
This re-arranges the TCP state definitions to align with Linux.
Fixes #478
PiperOrigin-RevId: 374996751
|
|
Before this change, we would silently drop packets when link resolution
failed. This change brings us into line with RFC 792 (IPv4) and RFC 4443 (IPv6),
both of which specify that gateways should return an ICMP error to the sender
when link resolution fails.
PiperOrigin-RevId: 374699789
|
|
Before fix, use of this flag causes an error.
It affects applications like OpenVPN which sets this flag for legacy reasons.
According to linux/if_tun.h "This flag has no real effect".
|
|
https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt:
/proc/sys/net/ipv4/* Variables:
ip_forward - BOOLEAN
0 - disabled (default)
not 0 - enabled
Forward Packets between interfaces.
This variable is special, its change resets all configuration
parameters to their default state (RFC1122 for hosts, RFC1812
for routers)
/proc/sys/net/ipv4/ip_forward only does work when its value is changed
and always returns the last written value. The last written value may
not reflect the current state of the netstack (e.g. when `ip_forward`
was written a value of "1" then disable forwarding on an interface)
so there is no need for sentry to probe netstack to get the current
forwarding state of interfaces.
```
~$ cat /proc/sys/net/ipv4/ip_forward
0
~$ sudo bash -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
~$ cat /proc/sys/net/ipv4/ip_forward
1
~$ sudo sysctl -a | grep ipv4 | grep forward
net.ipv4.conf.all.forwarding = 1
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.eno1.forwarding = 1
net.ipv4.conf.lo.forwarding = 1
net.ipv4.conf.wlp1s0.forwarding = 1
net.ipv4.ip_forward = 1
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ sudo sysctl -w net.ipv4.conf.wlp1s0.forwarding=0
net.ipv4.conf.wlp1s0.forwarding = 0
~$ sudo sysctl -a | grep ipv4 | grep forward
net.ipv4.conf.all.forwarding = 1
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.eno1.forwarding = 1
net.ipv4.conf.lo.forwarding = 1
net.ipv4.conf.wlp1s0.forwarding = 0
net.ipv4.ip_forward = 1
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ cat /proc/sys/net/ipv4/ip_forward
1
~$ sudo bash -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
~$ sudo sysctl -a | grep ipv4 | grep forward
net.ipv4.conf.all.forwarding = 1
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.eno1.forwarding = 1
net.ipv4.conf.lo.forwarding = 1
net.ipv4.conf.wlp1s0.forwarding = 0
net.ipv4.ip_forward = 1
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ sudo bash -c "echo 0 > /proc/sys/net/ipv4/ip_forward"
~$ sudo sysctl -a | grep ipv4 | grep forward
sysctl: unable to open directory "/proc/sys/fs/binfmt_misc/"
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.eno1.forwarding = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv4.conf.wlp1s0.forwarding = 0
net.ipv4.ip_forward = 0
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ cat /proc/sys/net/ipv4/ip_forward
0
```
In the above example we can see that writing "1" to
/proc/sys/net/ipv4/ip_forward configures the stack to be a router (all
interfaces are configured to enable forwarding). However, if we manually
update an interace (`wlp1s0`) to not forward packets,
/proc/sys/net/ipv4/ip_forward continues to return the last written value
of "1", even though not all interfaces will forward packets.
Also note that writing the same value twice has no effect; work is
performed iff the value changes.
This change also removes the 'unset' state from sentry's ip forwarding
data structures as an 'unset' ip forwarding value is the same as leaving
forwarding disabled as the stack is always brought up with forwarding
initially disabled; disabling forwarding on a newly created stack is a
no-op.
PiperOrigin-RevId: 373853106
|
|
...to make it clear to callers that all interfaces are updated with the
forwarding flag and that future NICs will be created with the new
forwarding state.
PiperOrigin-RevId: 373618435
|
|
Fix TODO comments referring to incorrect issue numbers. Also fix the link in
issue reviver comments to include the right url fragment.
PiperOrigin-RevId: 373491821
|
|
Before this change, we would silently drop packets when the packet was too
big to be sent out through the NIC (and, for IPv4 packets, if DF was set).
This change brings us into line with RFC 792 (IPv4) and RFC 4443 (IPv6),
both of which specify that gateways should return an ICMP error to the sender
when the packet can't be fragmented.
PiperOrigin-RevId: 373480078
|
|
PiperOrigin-RevId: 373265454
|
|
Currently, we process IPv6 extension headers when receiving packets
but not when forwarding them. This is fine for the most part, with
with one exception: RFC 8200 requires that we process the
Hop-by-Hop headers even while forwarding packets.
This CL adds that support by invoking the Hop-by-hop logic performed
when receiving packets during forwarding as well.
PiperOrigin-RevId: 373145478
|
|
Before this change, we would silently drop packets when unable to determine a
route to the destination host. This change brings us into line with RFC 792
(IPv4) and RFC 4443 (IPv6), both of which specify that gateways should return
an ICMP error to the sender when unable to reach the destination.
Startblock:
has LGTM from asfez
and then
add reviewer ghanan
PiperOrigin-RevId: 372214051
|
|
Co-Author: ayushranjan
PiperOrigin-RevId: 370785009
|
|
PiperOrigin-RevId: 370181621
|
|
In https://github.com/google/gvisor/commit/f075522849fa a check to increase zero
to a minimum backlog length was removed from sys_socket.go to bring it in parity
with linux and then in tcp/endpoint.go we bump backlog by 1. But this broke
calling listen on a AF_UNIX socket w/ a zero backlog as in linux it does allow 1
connection even with a zero backlog.
This was caught by a php runtime test socket_abstract_path.phpt.
PiperOrigin-RevId: 369974744
|
|
With this change, GSO options no longer needs to be passed around as
a function argument in the write path.
This change is done in preparation for a later change that defers
segmentation, and may change GSO options for a packet as it flows
down the stack.
Updates #170.
PiperOrigin-RevId: 369774872
|
|
Fixes #2926, #674
PiperOrigin-RevId: 369457123
|
|
Also count failed TCP port allocations
PiperOrigin-RevId: 368939619
|
|
The current SNAT implementation has several limitations:
- SNAT source port has to be specified. It is not optional.
- SNAT source port range is not supported.
- SNAT for UDP is a one-way translation. No response packets
are handled (because conntrack doesn't support UDP currently).
- SNAT and REDIRECT can't work on the same connection.
Fixes #5489
PiperOrigin-RevId: 367750325
|
|
Split usermem package to help remove syserror dependency in go_marshal.
New hostarch package contains code not dependent on syserror.
PiperOrigin-RevId: 365651233
|
|
On Linux these are meant to be equivalent to POLLIN/POLLOUT. Rather
than hack these on in sys_poll etc it felt cleaner to just cleanup
the call sites to notify for both events. This is what linux does
as well.
Fixes #5544
PiperOrigin-RevId: 364859977
|
|
Doing so involved breaking dependencies between //pkg/tcpip and the rest
of gVisor, which are discouraged anyways.
Tested on the Go branch via:
gvisor.dev/gvisor/pkg/tcpip/...
Addresses #1446.
PiperOrigin-RevId: 363081778
|
|
PiperOrigin-RevId: 362999220
|
|
Speeds up the socket stress tests by a couple orders of magnitude.
PiperOrigin-RevId: 361721050
|
|
transport.baseEndpoint.receiver and transport.baseEndpoint.connected are
protected by transport.baseEndpoint.Mutex. In order to access them without
holding the mutex, we must make a copy.
Notifications must be sent without holding the mutex, so we need the values
without holding the mutex.
|
|
While I'm here, simplify the comments and unify naming of certain stats
across protocols.
PiperOrigin-RevId: 360728849
|
|
The syscall package has been deprecated in favor of golang.org/x/sys.
Note that syscall is still used in the following places:
- pkg/sentry/socket/hostinet/stack.go: some netlink related functionalities
are not yet available in golang.org/x/sys.
- syscall.Stat_t is still used in some places because os.FileInfo.Sys() still
returns it and not unix.Stat_t.
Updates #214
PiperOrigin-RevId: 360701387
|
|
This removes a three-lock deadlock between fdnotifier.notifier.mu,
epoll.EventPoll.listsMu, and baseEndpoint.mu.
A lock order comment was added to epoll/epoll.go.
Also fix unsafe access of baseEndpoint.connected/receiver.
PiperOrigin-RevId: 358515191
|
|
Also skips a test if the setsockopt to increase send buffer did not result in an
increase. This is possible when the underlying socket is a host backed unix
domain socket as in such cases gVisor does not permit increasing SO_SNDBUF.
PiperOrigin-RevId: 358285158
|
|
This change also adds support for Router Alert option processing on
incoming packets, a new stat for Router Alert option, and exports
all the IP-option related stats.
Fixes #5491
PiperOrigin-RevId: 358238123
|
|
PiperOrigin-RevId: 358078157
|
|
This change implements TLP details enumerated in
https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5.3
Fixes #5085
PiperOrigin-RevId: 357125037
|
|
The limits for snd/rcv buffers for unix domain socket is controlled by the
following sysctls on linux
- net.core.rmem_default
- net.core.rmem_max
- net.core.wmem_default
- net.core.wmem_max
Today in gVisor we do not expose these sysctls but we do support setting the
equivalent in netstack via stack.Options() method. But AF_UNIX sockets in gVisor
can be used without netstack, with hostinet or even without any networking stack
at all. Which means ideally these sysctls need to live as globals in gVisor.
But rather than make this a big change for now we hardcode the limits in the
AF_UNIX implementation itself (which in itself is better than where we were
before) where it SO_SNDBUF was hardcoded to 16KiB. Further we bump the initial
limit to a default value of 208 KiB to match linux from the paltry 16 KiB we use
today.
Updates #5132
PiperOrigin-RevId: 356665498
|
|
Panic seen at some code path like control.ExecAsync where
ctx does not have a Task.
Reported-by: syzbot+55ce727161cf94a7b7d6@syzkaller.appspotmail.com
PiperOrigin-RevId: 355960596
|
|
...to remove the need for the transport layer to deduce the type of
error it received.
Rename HandleControlPacket to HandleError as HandleControlPacket only
handles errors.
tcpip.SockError now holds a tcpip.SockErrorCause interface that
different errors can implement.
PiperOrigin-RevId: 354994306
|
|
This makes it possible to add data to types that implement tcpip.Error.
ErrBadLinkEndpoint is removed as it is unused.
PiperOrigin-RevId: 354437314
|
|
This was removed in 6c0e1d9cfe6adbfbb32e7020d6426608ac63ad37 but turns
out to be crucial to prevent flaky behaviour in sendfile.
PiperOrigin-RevId: 354434144
|
|
This CL adds support for the following fields:
- RTT, RTTVar, RTO
- send congestion window (sndCwnd) and send slow start threshold (sndSsthresh)
- congestion control state(CaState)
- ReorderSeen
PiperOrigin-RevId: 354195361
|
|
- This CL will initialize the function handler used for getting the send
buffer size limits during endpoint creation and does not require the caller of
SetSendBufferSize(..) to know the endpoint type(tcp/udp/..)
PiperOrigin-RevId: 353992634
|
|
If data is sent over a stream socket that will not fit all at once, it will
be sent over multiple packets. SCM Rights should only be sent with the first
packet (see net/unix/af_unix.c:unix_stream_sendmsg in Linux).
Reported-by: syzbot+aa26482e9c4887aff259@syzkaller.appspotmail.com
PiperOrigin-RevId: 353886442
|
|
This CL moves {S,G}etsockopt of SO_SNDBUF from all endpoints to socketops. For
unix sockets, we do not support setting of this option.
PiperOrigin-RevId: 353871484
|
|
The ARP stat NetworkUnreachable was removed, and was replaced by
InterfaceHasNoLocalAddress. No stats are recorded when dealing with an
missing endpoint (ErrNotConnected) (because if there is no endpoint,
there is no valid per-endpoint stats).
PiperOrigin-RevId: 353759462
|
|
Fixes #1509.
PiperOrigin-RevId: 353295589
|
|
We have support for the output interface name, but not for the input
interface name.
This change adds the support for the input interface name, and adds the
test cases for it.
Fixes #5300
PiperOrigin-RevId: 353179389
|
|
- Removes the unimplemented message for SO_LINGER
- Fix the length for IP_PKTINFO option
PiperOrigin-RevId: 352917611
|
|
PiperOrigin-RevId: 352904728
|
|
The same intent can be specified via the io.Writer.
PiperOrigin-RevId: 352098747
|
|
Fixes #4963
Startblock:
has LGTM from sbalana
and then
add reviewer ghanan
PiperOrigin-RevId: 351886320
|
|
Link address resolution is performed at the link layer (if required) so
we can defer it from the transport layer. When link resolution is
required, packets will be queued and sent once link resolution
completes. If link resolution fails, the transport layer will receive a
control message indicating that the stack failed to route the packet.
tcpip.Endpoint.Write no longer returns a channel now that writes do not
wait for link resolution at the transport layer.
tcpip.ErrNoLinkAddress is no longer used so it is removed.
Removed calls to stack.Route.ResolveWith from the transport layer so
that link resolution is performed when a route is created in response
to an incoming packet (e.g. to complete TCP handshakes or send a RST).
Tests:
- integration_test.TestForwarding
- integration_test.TestTCPLinkResolutionFailure
Fixes #4458
RELNOTES: n/a
PiperOrigin-RevId: 351684158
|