| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This change lets us split the v4 stats from the v6 stats, which will be
useful when adding stats for each network endpoint.
PiperOrigin-RevId: 345322615
|
|
|
|
Moved AddressAndFamily() and ConvertAddress() to socket package from netstack.
This helps because these utilities are used by sibling netstack packages.
Such sibling dependencies can later cause circular dependencies. Common utils
shared between siblings should be moved up to the parent.
PiperOrigin-RevId: 345275571
|
|
|
|
Ports the following options:
- TCP_NODELAY
- TCP_CORK
- TCP_QUICKACK
Also deletes the {Get/Set}SockOptBool interface methods from all implementations
PiperOrigin-RevId: 344378824
|
|
|
|
We will use SocketOptions for all kinds of options, not just SOL_SOCKET options
because (1) it is consistent with Linux which defines all option variables on
the top level socket struct, (2) avoid code complexity. Appropriate checks
have been added for matching option level to the endpoint type.
Ported the following options to this new utility:
- IP_MULTICAST_LOOP
- IP_RECVTOS
- IPV6_RECVTCLASS
- IP_PKTINFO
- IP_HDRINCL
- IPV6_V6ONLY
Changes in behavior (these are consistent with what Linux does AFAICT):
- Now IP_MULTICAST_LOOP can be set for TCP (earlier it was a noop) but does not
affect the endpoint itself.
- We can now getsockopt IP_HDRINCL (earlier we would get an error).
- Now we return ErrUnknownProtocolOption if SOL_IP or SOL_IPV6 options are used
on unix sockets.
- Now we return ErrUnknownProtocolOption if SOL_IPV6 options are used on non
AF_INET6 endpoints.
This change additionally makes the following modifications:
- Add State() uint32 to commonEndpoint because both tcpip.Endpoint and
transport.Endpoint interfaces have it. It proves to be quite useful.
- Gets rid of SocketOptionsHandler.IsListening(). It was an anomaly as it was
not a handler. It is now implemented on netstack itself.
- Gets rid of tcp.endpoint.EndpointInfo and directly embeds
stack.TransportEndpointInfo. There was an unnecessary level of embedding
which served no purpose.
- Removes some checks dual_stack_test.go that used the errors from
GetSockOptBool(tcpip.V6OnlyOption) to confirm some state. This is not
consistent with the new design and also seemed to be testing the
implementation instead of behavior.
PiperOrigin-RevId: 344354051
|
|
|
|
PiperOrigin-RevId: 343217712
|
|
|
|
This changes also introduces:
- `SocketOptionsHandler` interface which can be implemented by endpoints to
handle endpoint specific behavior on SetSockOpt. This is analogous to what
Linux does.
- `DefaultSocketOptionsHandler` which is a default implementation of the above.
This is embedded in all endpoints so that we don't have to uselessly
implement empty functions. Endpoints with specific behavior can override the
embedded method by manually defining its own implementation.
PiperOrigin-RevId: 343158301
|
|
|
|
PiperOrigin-RevId: 343146856
|
|
|
|
This change also makes the following fixes:
- Make SocketOptions use atomic operations instead of having to acquire/drop
locks upon each get/set option.
- Make documentation more consistent.
- Remove tcpip.SocketOptions from socketOpsCommon because it already exists
in transport.Endpoint.
- Refactors get/set socket options tests to be easily extendable.
PiperOrigin-RevId: 343103780
|
|
|
|
Fixes the behaviour of SO_ERROR for tcp sockets where in linux it returns
sk->sk_err and if sk->sk_err is 0 then it returns sk->sk_soft_err. In gVisor TCP
we endpoint.HardError is the equivalent of sk->sk_err and endpoint.LastError
holds soft errors. This change brings this into alignment with Linux such that
both hard/soft errors are cleared when retrieved using getsockopt(.. SO_ERROR)
is called on a socket.
Fixes #3812
PiperOrigin-RevId: 342868552
|
|
|
|
Store all the socket level options in a struct and call {Get/Set}SockOpt on
this struct. This will avoid implementing socket level options on all
endpoints. This CL contains implementing one socket level option for tcp and
udp endpoints.
PiperOrigin-RevId: 342203981
|
|
|
|
This lets us avoid treating a value of 0 as one reference. All references
using the refsvfs2 template must call InitRefs() before the reference is
incremented/decremented, or else a panic will occur. Therefore, it should be
pretty easy to identify missing InitRef calls during testing.
Updates #1486.
PiperOrigin-RevId: 341411151
|
|
|
|
PiperOrigin-RevId: 340149214
|
|
|
|
Fixes #4613.
PiperOrigin-RevId: 339746784
|
|
|
|
PiperOrigin-RevId: 339721152
|
|
|
|
|
|
Updates #3921
PiperOrigin-RevId: 339195417
|
|
|
|
Control messages collected when peeking into a socket were being leaked.
PiperOrigin-RevId: 339114961
|
|
|
|
PiperOrigin-RevId: 338784921
|
|
|
|
Inode number consistency checks are now skipped in save/restore tests for
reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename.
They pass in VFS1 due to the bug described in new test case
SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs.
Fixes #1663
PiperOrigin-RevId: 338776148
|
|
|
|
Added the following fields in kernfs.InodeAttr:
- blockSize
- atime
- mtime
- ctime
Also resolved all TODOs for #1193.
Fixes #1193
PiperOrigin-RevId: 338714527
|
|
|
|
The SO_ACCEPTCONN option is used only on getsockopt(). When this option is
specified, getsockopt() indicates whether socket listening is enabled for
the socket. A value of zero indicates that socket listening is disabled;
non-zero that it is enabled.
PiperOrigin-RevId: 338703206
|
|
|
|
Our current reference leak checker uses finalizers to verify whether an object
has reached zero references before it is garbage collected. There are multiple
problems with this mechanism, so a rewrite is in order.
With finalizers, there is no way to guarantee that a finalizer will run before
the program exits. When an unreachable object with a finalizer is garbage
collected, its finalizer will be added to a queue and run asynchronously. The
best we can do is run garbage collection upon sandbox exit to make sure that
all finalizers are enqueued.
Furthermore, if there is a chain of finalized objects, e.g. A points to B
points to C, garbage collection needs to run multiple times before all of the
finalizers are enqueued. The first GC run will register the finalizer for A but
not free it. It takes another GC run to free A, at which point B's finalizer
can be registered. As a result, we need to run GC as many times as the length
of the longest such chain to have a somewhat reliable leak checker.
Finally, a cyclical chain of structs pointing to one another will never be
garbage collected if a finalizer is set. This is a well-known issue with Go
finalizers (https://github.com/golang/go/issues/7358). Using leak checking on
filesystem objects that produce cycles will not work and even result in memory
leaks.
The new leak checker stores reference counted objects in a global map when
leak check is enabled and removes them once they are destroyed. At sandbox
exit, any remaining objects in the map are considered as leaked. This provides
a deterministic way of detecting leaks without relying on the complexities of
finalizers and garbage collection.
This approach has several benefits over the former, including:
- Always detects leaks of objects that should be destroyed very close to
sandbox exit. The old checker very rarely detected these leaks, because it
relied on garbage collection to be run in a short window of time.
- Panics if we forgot to enable leak check on a ref-counted object (we will try
to remove it from the map when it is destroyed, but it will never have been
added).
- Can store extra logging information in the map values without adding to the
size of the ref count struct itself. With the size of just an int64, the ref
count object remains compact, meaning frequent operations like IncRef/DecRef
are more cache-efficient.
- Can aggregate leak results in a single report after the sandbox exits.
Instead of having warnings littered in the log, which were
non-deterministically triggered by garbage collection, we can print all
warning messages at once. Note that this could also be a limitation--the
sandbox must exit properly for leaks to be detected.
Some basic benchmarking indicates that this change does not significantly
affect performance when leak checking is enabled, which is understandable
since registering/unregistering is only done once for each filesystem object.
Updates #1486.
PiperOrigin-RevId: 338685972
|
|
|
|
Reported-by: syzbot+5466463b7604c2902875@syzkaller.appspotmail.com
PiperOrigin-RevId: 337451896
|
|
|
|
Control messages should be released on Read (which ignores the control message)
or zero-byte Send. Otherwise, open fds sent through the control messages will
be leaked.
PiperOrigin-RevId: 337110774
|
|
|
|
|
|
|
